drivers/media/video/saa7164/saa7164-api.c - kernel/msm-4.9 - Gitiles

 /*
  *  Driver for the NXP SAA7164 PCIe bridge
  *
  *  Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
  *  the Free Software Foundation; either version 2 of the License, or
  *  (at your option) any later version.
  *
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *
  *  GNU General Public License for more details.
  *
  *  You should have received a copy of the GNU General Public License
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */

 #include <linux/wait.h>
 #include <linux/slab.h>

 #include "saa7164.h"

 int saa7164_api_transition_port(struct saa7164_tsport *port, u8 mode)
 {
 	int ret;

 	ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, SET_CUR,
 		SAA_STATE_CONTROL, sizeof(mode), &mode);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);

 	return ret;
 }

 int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version)
 {
 	int ret;

 	ret = saa7164_cmd_send(dev, 0, GET_CUR,
 		GET_FW_VERSION_CONTROL, sizeof(u32), version);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);

 	return ret;
 }

 int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen)
 {
 	u8 reg[] = { 0x0f, 0x00 };

 	if (buflen < 128)
 		return -ENOMEM;

 	/* Assumption: Hauppauge eeprom is at 0xa0 on on bus 0 */
 	/* TODO: Pull the details from the boards struct */
 	return saa7164_api_i2c_read(&dev->i2c_bus[0], 0xa0 >> 1, sizeof(reg),
 		&reg[0], 128, buf);
 }


 int saa7164_api_configure_port_mpeg2ts(struct saa7164_dev *dev,
 	struct saa7164_tsport *port,
 	tmComResTSFormatDescrHeader_t *tsfmt)
 {
 	dprintk(DBGLVL_API, "    bFormatIndex = 0x%x\n", tsfmt->bFormatIndex);
 	dprintk(DBGLVL_API, "    bDataOffset  = 0x%x\n", tsfmt->bDataOffset);
 	dprintk(DBGLVL_API, "    bPacketLength= 0x%x\n", tsfmt->bPacketLength);
 	dprintk(DBGLVL_API, "    bStrideLength= 0x%x\n", tsfmt->bStrideLength);
 	dprintk(DBGLVL_API, "    bguid        = (....)\n");

 	/* Cache the hardware configuration in the port */

 	port->bufcounter = port->hwcfg.BARLocation;
 	port->pitch = port->hwcfg.BARLocation + (2 * sizeof(u32));
 	port->bufsize = port->hwcfg.BARLocation + (3 * sizeof(u32));
 	port->bufoffset = port->hwcfg.BARLocation + (4 * sizeof(u32));
 	port->bufptr32l = port->hwcfg.BARLocation +
 		(4 * sizeof(u32)) +
 		(sizeof(u32) * port->hwcfg.buffercount) + sizeof(u32);
 	port->bufptr32h = port->hwcfg.BARLocation +
 		(4 * sizeof(u32)) +
 		(sizeof(u32) * port->hwcfg.buffercount);
 	port->bufptr64 = port->hwcfg.BARLocation +
 		(4 * sizeof(u32)) +
 		(sizeof(u32) * port->hwcfg.buffercount);
 	dprintk(DBGLVL_API, "   = port->hwcfg.BARLocation = 0x%x\n",
 		port->hwcfg.BARLocation);

 	dprintk(DBGLVL_API, "   = VS_FORMAT_MPEGTS (becomes dev->ts[%d])\n",
 		port->nr);

 	return 0;
 }

 int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 {
 	struct saa7164_tsport *port = 0;
 	u32 idx, next_offset;
 	int i;
 	tmComResDescrHeader_t *hdr, *t;
 	tmComResExtDevDescrHeader_t *exthdr;
 	tmComResPathDescrHeader_t *pathhdr;
 	tmComResAntTermDescrHeader_t *anttermhdr;
 	tmComResTunerDescrHeader_t *tunerunithdr;
 	tmComResDMATermDescrHeader_t *vcoutputtermhdr;
 	tmComResTSFormatDescrHeader_t *tsfmt;
 	u32 currpath = 0;

 	dprintk(DBGLVL_API,
 		"%s(?,?,%d) sizeof(tmComResDescrHeader_t) = %d bytes\n",
 		__func__, len, (u32)sizeof(tmComResDescrHeader_t));

 	for (idx = 0; idx < (len - sizeof(tmComResDescrHeader_t)); ) {

 		hdr = (tmComResDescrHeader_t *)(buf + idx);

 		if (hdr->type != CS_INTERFACE)
 			return SAA_ERR_NOT_SUPPORTED;

 		dprintk(DBGLVL_API, "@ 0x%x = \n", idx);
 		switch (hdr->subtype) {
 		case GENERAL_REQUEST:
 			dprintk(DBGLVL_API, " GENERAL_REQUEST\n");
 			break;
 		case VC_TUNER_PATH:
 			dprintk(DBGLVL_API, " VC_TUNER_PATH\n");
 			pathhdr = (tmComResPathDescrHeader_t *)(buf + idx);
 			dprintk(DBGLVL_API, "  pathid = 0x%x\n",
 				pathhdr->pathid);
 			currpath = pathhdr->pathid;
 			break;
 		case VC_INPUT_TERMINAL:
 			dprintk(DBGLVL_API, " VC_INPUT_TERMINAL\n");
 			anttermhdr =
 				(tmComResAntTermDescrHeader_t *)(buf + idx);
 			dprintk(DBGLVL_API, "  terminalid   = 0x%x\n",
 				anttermhdr->terminalid);
 			dprintk(DBGLVL_API, "  terminaltype = 0x%x\n",
 				anttermhdr->terminaltype);
 			switch (anttermhdr->terminaltype) {
 			case ITT_ANTENNA:
 				dprintk(DBGLVL_API, "   = ITT_ANTENNA\n");
 				break;
 			case LINE_CONNECTOR:
 				dprintk(DBGLVL_API, "   = LINE_CONNECTOR\n");
 				break;
 			case SPDIF_CONNECTOR:
 				dprintk(DBGLVL_API, "   = SPDIF_CONNECTOR\n");
 				break;
 			case COMPOSITE_CONNECTOR:
 				dprintk(DBGLVL_API,
 					"   = COMPOSITE_CONNECTOR\n");
 				break;
 			case SVIDEO_CONNECTOR:
 				dprintk(DBGLVL_API, "   = SVIDEO_CONNECTOR\n");
 				break;
 			case COMPONENT_CONNECTOR:
 				dprintk(DBGLVL_API,
 					"   = COMPONENT_CONNECTOR\n");
 				break;
 			case STANDARD_DMA:
 				dprintk(DBGLVL_API, "   = STANDARD_DMA\n");
 				break;
 			default:
 				dprintk(DBGLVL_API, "   = undefined (0x%x)\n",
 					anttermhdr->terminaltype);
 			}
 			dprintk(DBGLVL_API, "  assocterminal= 0x%x\n",
 				anttermhdr->assocterminal);
 			dprintk(DBGLVL_API, "  iterminal    = 0x%x\n",
 				anttermhdr->iterminal);
 			dprintk(DBGLVL_API, "  controlsize  = 0x%x\n",
 				anttermhdr->controlsize);
 			break;
 		case VC_OUTPUT_TERMINAL:
 			dprintk(DBGLVL_API, " VC_OUTPUT_TERMINAL\n");
 			vcoutputtermhdr =
 				(tmComResDMATermDescrHeader_t *)(buf + idx);
 			dprintk(DBGLVL_API, "  unitid = 0x%x\n",
 				vcoutputtermhdr->unitid);
 			dprintk(DBGLVL_API, "  terminaltype = 0x%x\n",
 				vcoutputtermhdr->terminaltype);
 			switch (vcoutputtermhdr->terminaltype) {
 			case ITT_ANTENNA:
 				dprintk(DBGLVL_API, "   = ITT_ANTENNA\n");
 				break;
 			case LINE_CONNECTOR:
 				dprintk(DBGLVL_API, "   = LINE_CONNECTOR\n");
 				break;
 			case SPDIF_CONNECTOR:
 				dprintk(DBGLVL_API, "   = SPDIF_CONNECTOR\n");
 				break;
 			case COMPOSITE_CONNECTOR:
 				dprintk(DBGLVL_API,
 					"   = COMPOSITE_CONNECTOR\n");
 				break;
 			case SVIDEO_CONNECTOR:
 				dprintk(DBGLVL_API, "   = SVIDEO_CONNECTOR\n");
 				break;
 			case COMPONENT_CONNECTOR:
 				dprintk(DBGLVL_API,
 					"   = COMPONENT_CONNECTOR\n");
 				break;
 			case STANDARD_DMA:
 				dprintk(DBGLVL_API, "   = STANDARD_DMA\n");
 				break;
 			default:
 				dprintk(DBGLVL_API, "   = undefined (0x%x)\n",
 					vcoutputtermhdr->terminaltype);
 			}
 			dprintk(DBGLVL_API, "  assocterminal= 0x%x\n",
 				vcoutputtermhdr->assocterminal);
 			dprintk(DBGLVL_API, "  sourceid     = 0x%x\n",
 				vcoutputtermhdr->sourceid);
 			dprintk(DBGLVL_API, "  iterminal    = 0x%x\n",
 				vcoutputtermhdr->iterminal);
 			dprintk(DBGLVL_API, "  BARLocation  = 0x%x\n",
 				vcoutputtermhdr->BARLocation);
 			dprintk(DBGLVL_API, "  flags        = 0x%x\n",
 				vcoutputtermhdr->flags);
 			dprintk(DBGLVL_API, "  interruptid  = 0x%x\n",
 				vcoutputtermhdr->interruptid);
 			dprintk(DBGLVL_API, "  buffercount  = 0x%x\n",
 				vcoutputtermhdr->buffercount);
 			dprintk(DBGLVL_API, "  metadatasize = 0x%x\n",
 				vcoutputtermhdr->metadatasize);
 			dprintk(DBGLVL_API, "  controlsize  = 0x%x\n",
 				vcoutputtermhdr->controlsize);
 			dprintk(DBGLVL_API, "  numformats   = 0x%x\n",
 				vcoutputtermhdr->numformats);

 			t = (tmComResDescrHeader_t *)
 				((tmComResDMATermDescrHeader_t *)(buf + idx));
 			next_offset = idx + (vcoutputtermhdr->len);
 			for (i = 0; i < vcoutputtermhdr->numformats; i++) {
 				t = (tmComResDescrHeader_t *)
 					(buf + next_offset);
 				switch (t->subtype) {
 				case VS_FORMAT_MPEG2TS:
 					tsfmt =
 					(tmComResTSFormatDescrHeader_t *)t;
 					if (currpath == 1)
 						port = &dev->ts1;
 					else
 						port = &dev->ts2;
 					memcpy(&port->hwcfg, vcoutputtermhdr,
 						sizeof(*vcoutputtermhdr));
 					saa7164_api_configure_port_mpeg2ts(dev,
 						port, tsfmt);
 					break;
 				case VS_FORMAT_MPEG2PS:
 					dprintk(DBGLVL_API,
 						"   = VS_FORMAT_MPEG2PS\n");
 					break;
 				case VS_FORMAT_VBI:
 					dprintk(DBGLVL_API,
 						"   = VS_FORMAT_VBI\n");
 					break;
 				case VS_FORMAT_RDS:
 					dprintk(DBGLVL_API,
 						"   = VS_FORMAT_RDS\n");
 					break;
 				case VS_FORMAT_UNCOMPRESSED:
 					dprintk(DBGLVL_API,
 					"   = VS_FORMAT_UNCOMPRESSED\n");
 					break;
 				case VS_FORMAT_TYPE:
 					dprintk(DBGLVL_API,
 						"   = VS_FORMAT_TYPE\n");
 					break;
 				default:
 					dprintk(DBGLVL_API,
 						"   = undefined (0x%x)\n",
 						t->subtype);
 				}
 				next_offset += t->len;
 			}

 			break;
 		case TUNER_UNIT:
 			dprintk(DBGLVL_API, " TUNER_UNIT\n");
 			tunerunithdr =
 				(tmComResTunerDescrHeader_t *)(buf + idx);
 			dprintk(DBGLVL_API, "  unitid = 0x%x\n",
 				tunerunithdr->unitid);
 			dprintk(DBGLVL_API, "  sourceid = 0x%x\n",
 				tunerunithdr->sourceid);
 			dprintk(DBGLVL_API, "  iunit = 0x%x\n",
 				tunerunithdr->iunit);
 			dprintk(DBGLVL_API, "  tuningstandards = 0x%x\n",
 				tunerunithdr->tuningstandards);
 			dprintk(DBGLVL_API, "  controlsize = 0x%x\n",
 				tunerunithdr->controlsize);
 			dprintk(DBGLVL_API, "  controls = 0x%x\n",
 				tunerunithdr->controls);
 			break;
 		case VC_SELECTOR_UNIT:
 			dprintk(DBGLVL_API, " VC_SELECTOR_UNIT\n");
 			break;
 		case VC_PROCESSING_UNIT:
 			dprintk(DBGLVL_API, " VC_PROCESSING_UNIT\n");
 			break;
 		case FEATURE_UNIT:
 			dprintk(DBGLVL_API, " FEATURE_UNIT\n");
 			break;
 		case ENCODER_UNIT:
 			dprintk(DBGLVL_API, " ENCODER_UNIT\n");
 			break;
 		case EXTENSION_UNIT:
 			dprintk(DBGLVL_API, " EXTENSION_UNIT\n");
 			exthdr = (tmComResExtDevDescrHeader_t *)(buf + idx);
 			dprintk(DBGLVL_API, "  unitid = 0x%x\n",
 				exthdr->unitid);
 			dprintk(DBGLVL_API, "  deviceid = 0x%x\n",
 				exthdr->deviceid);
 			dprintk(DBGLVL_API, "  devicetype = 0x%x\n",
 				exthdr->devicetype);
 			if (exthdr->devicetype & 0x1)
 				dprintk(DBGLVL_API, "   = Decoder Device\n");
 			if (exthdr->devicetype & 0x2)
 				dprintk(DBGLVL_API, "   = GPIO Source\n");
 			if (exthdr->devicetype & 0x4)
 				dprintk(DBGLVL_API, "   = Video Decoder\n");
 			if (exthdr->devicetype & 0x8)
 				dprintk(DBGLVL_API, "   = Audio Decoder\n");
 			if (exthdr->devicetype & 0x20)
 				dprintk(DBGLVL_API, "   = Crossbar\n");
 			if (exthdr->devicetype & 0x40)
 				dprintk(DBGLVL_API, "   = Tuner\n");
 			if (exthdr->devicetype & 0x80)
 				dprintk(DBGLVL_API, "   = IF PLL\n");
 			if (exthdr->devicetype & 0x100)
 				dprintk(DBGLVL_API, "   = Demodulator\n");
 			if (exthdr->devicetype & 0x200)
 				dprintk(DBGLVL_API, "   = RDS Decoder\n");
 			if (exthdr->devicetype & 0x400)
 				dprintk(DBGLVL_API, "   = Encoder\n");
 			if (exthdr->devicetype & 0x800)
 				dprintk(DBGLVL_API, "   = IR Decoder\n");
 			if (exthdr->devicetype & 0x1000)
 				dprintk(DBGLVL_API, "   = EEPROM\n");
 			if (exthdr->devicetype & 0x2000)
 				dprintk(DBGLVL_API,
 					"   = VBI Decoder\n");
 			if (exthdr->devicetype & 0x10000)
 				dprintk(DBGLVL_API,
 					"   = Streaming Device\n");
 			if (exthdr->devicetype & 0x20000)
 				dprintk(DBGLVL_API,
 					"   = DRM Device\n");
 			if (exthdr->devicetype & 0x40000000)
 				dprintk(DBGLVL_API,
 					"   = Generic Device\n");
 			if (exthdr->devicetype & 0x80000000)
 				dprintk(DBGLVL_API,
 					"   = Config Space Device\n");
 			dprintk(DBGLVL_API, "  numgpiopins = 0x%x\n",
 				exthdr->numgpiopins);
 			dprintk(DBGLVL_API, "  numgpiogroups = 0x%x\n",
 				exthdr->numgpiogroups);
 			dprintk(DBGLVL_API, "  controlsize = 0x%x\n",
 				exthdr->controlsize);
 			break;
 		case PVC_INFRARED_UNIT:
 			dprintk(DBGLVL_API, " PVC_INFRARED_UNIT\n");
 			break;
 		case DRM_UNIT:
 			dprintk(DBGLVL_API, " DRM_UNIT\n");
 			break;
 		default:
 			dprintk(DBGLVL_API, "default %d\n", hdr->subtype);
 		}

 		dprintk(DBGLVL_API, " 1.%x\n", hdr->len);
 		dprintk(DBGLVL_API, " 2.%x\n", hdr->type);
 		dprintk(DBGLVL_API, " 3.%x\n", hdr->subtype);
 		dprintk(DBGLVL_API, " 4.%x\n", hdr->unitid);

 		idx += hdr->len;
 	}

 	return 0;
 }

 int saa7164_api_enum_subdevs(struct saa7164_dev *dev)
 {
 	int ret;
 	u32 buflen = 0;
 	u8 *buf;

 	dprintk(DBGLVL_API, "%s()\n", __func__);

 	/* Get the total descriptor length */
 	ret = saa7164_cmd_send(dev, 0, GET_LEN,
 		GET_DESCRIPTORS_CONTROL, sizeof(buflen), &buflen);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);

 	dprintk(DBGLVL_API, "%s() total descriptor size = %d bytes.\n",
 		__func__, buflen);

 	/* Allocate enough storage for all of the descs */
 	buf = kzalloc(buflen, GFP_KERNEL);
 	if (buf == NULL)
 		return SAA_ERR_NO_RESOURCES;

 	/* Retrieve them */
 	ret = saa7164_cmd_send(dev, 0, GET_CUR,
 		GET_DESCRIPTORS_CONTROL, buflen, buf);
 	if (ret != SAA_OK) {
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 		goto out;
 	}

 	if (saa_debug & DBGLVL_API)
 		saa7164_dumphex16(dev, buf, (buflen/16)*16);

 	saa7164_api_dump_subdevs(dev, buf, buflen);

 out:
 	kfree(buf);
 	return ret;
 }

 int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg,
 	u32 datalen, u8 *data)
 {
 	struct saa7164_dev *dev = bus->dev;
 	u16 len = 0;
 	int unitid;
 	u32 regval;
 	u8 buf[256];
 	int ret;

 	dprintk(DBGLVL_API, "%s()\n", __func__);

 	if (reglen > 4)
 		return -EIO;

 	if (reglen == 1)
 		regval = *(reg);
 	else
 	if (reglen == 2)
 		regval = ((*(reg) << 8) || *(reg+1));
 	else
 	if (reglen == 3)
 		regval = ((*(reg) << 16) | (*(reg+1) << 8) | *(reg+2));
 	else
 	if (reglen == 4)
 		regval = ((*(reg) << 24) | (*(reg+1) << 16) |
 			(*(reg+2) << 8) | *(reg+3));

 	/* Prepare the send buffer */
 	/* Bytes 00-03 source register length
 	 *       04-07 source bytes to read
 	 *       08... register address
 	 */
 	memset(buf, 0, sizeof(buf));
 	memcpy((buf + 2 * sizeof(u32) + 0), reg, reglen);
 	*((u32 *)(buf + 0 * sizeof(u32))) = reglen;
 	*((u32 *)(buf + 1 * sizeof(u32))) = datalen;

 	unitid = saa7164_i2caddr_to_unitid(bus, addr);
 	if (unitid < 0) {
 		printk(KERN_ERR
 			"%s() error, cannot translate regaddr 0x%x to unitid\n",
 			__func__, addr);
 		return -EIO;
 	}

 	ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN,
 		EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len);
 	if (ret != SAA_OK) {
 		printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret);
 		return -EIO;
 	}

 	dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len);

 	if (saa_debug & DBGLVL_I2C)
 		saa7164_dumphex16(dev, buf, 2 * 16);

 	ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR,
 		EXU_REGISTER_ACCESS_CONTROL, len, &buf);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);
 	else {
 		if (saa_debug & DBGLVL_I2C)
 			saa7164_dumphex16(dev, buf, sizeof(buf));
 		memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen);
 	}

 	return ret == SAA_OK ? 0 : -EIO;
 }

 /* For a given 8 bit i2c address device, write the buffer */
 int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, u32 datalen,
 	u8 *data)
 {
 	struct saa7164_dev *dev = bus->dev;
 	u16 len = 0;
 	int unitid;
 	int reglen;
 	u8 buf[256];
 	int ret;

 	dprintk(DBGLVL_API, "%s()\n", __func__);

 	if ((datalen == 0) || (datalen > 232))
 		return -EIO;

 	memset(buf, 0, sizeof(buf));

 	unitid = saa7164_i2caddr_to_unitid(bus, addr);
 	if (unitid < 0) {
 		printk(KERN_ERR
 			"%s() error, cannot translate regaddr 0x%x to unitid\n",
 			__func__, addr);
 		return -EIO;
 	}

 	reglen = saa7164_i2caddr_to_reglen(bus, addr);
 	if (reglen < 0) {
 		printk(KERN_ERR
 			"%s() error, cannot translate regaddr to reglen\n",
 			__func__);
 		return -EIO;
 	}

 	ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN,
 		EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len);
 	if (ret != SAA_OK) {
 		printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret);
 		return -EIO;
 	}

 	dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len);

 	/* Prepare the send buffer */
 	/* Bytes 00-03 dest register length
 	 *       04-07 dest bytes to write
 	 *       08... register address
 	 */
 	*((u32 *)(buf + 0 * sizeof(u32))) = reglen;
 	*((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen;
 	memcpy((buf + 2 * sizeof(u32)), data, datalen);

 	if (saa_debug & DBGLVL_I2C)
 		saa7164_dumphex16(dev, buf, sizeof(buf));

 	ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR,
 		EXU_REGISTER_ACCESS_CONTROL, len, &buf);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);

 	return ret == SAA_OK ? 0 : -EIO;
 }


 int saa7164_api_modify_gpio(struct saa7164_dev *dev, u8 unitid,
 	u8 pin, u8 state)
 {
 	int ret;
 	tmComResGPIO_t t;

 	dprintk(DBGLVL_API, "%s(0x%x, %d, %d)\n",
 		__func__, unitid, pin, state);

 	if ((pin > 7) || (state > 2))
 		return SAA_ERR_BAD_PARAMETER;

 	t.pin = pin;
 	t.state = state;

 	ret = saa7164_cmd_send(dev, unitid, SET_CUR,
 		EXU_GPIO_CONTROL, sizeof(t), &t);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n",
 			__func__, ret);

 	return ret;
 }

 int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid,
 	u8 pin)
 {
 	return saa7164_api_modify_gpio(dev, unitid, pin, 1);
 }

 int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid,
 	u8 pin)
 {
 	return saa7164_api_modify_gpio(dev, unitid, pin, 0);
 }
	/*
	* Driver for the NXP SAA7164 PCIe bridge
	*
	* Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	*
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	#include <linux/wait.h>
	#include <linux/slab.h>

	#include "saa7164.h"

	int saa7164_api_transition_port(struct saa7164_tsport *port, u8 mode)
	{
	int ret;

	ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, SET_CUR,
	SAA_STATE_CONTROL, sizeof(mode), &mode);
	if (ret != SAA_OK)
	printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);

	return ret;
	}

	int saa7164_api_get_fw_version(struct saa7164_dev dev, u32 version)
	{
	int ret;

	ret = saa7164_cmd_send(dev, 0, GET_CUR,
	GET_FW_VERSION_CONTROL, sizeof(u32), version);
	if (ret != SAA_OK)
	printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);

	return ret;
	}

	int saa7164_api_read_eeprom(struct saa7164_dev dev, u8 buf, int buflen)
	{
	u8 reg[] = { 0x0f, 0x00 };

	if (buflen < 128)
	return -ENOMEM;

	/* Assumption: Hauppauge eeprom is at 0xa0 on on bus 0 */
	/* TODO: Pull the details from the boards struct */
	return saa7164_api_i2c_read(&dev->i2c_bus[0], 0xa0 >> 1, sizeof(reg),
	&reg[0], 128, buf);
	}


	int saa7164_api_configure_port_mpeg2ts(struct saa7164_dev *dev,
	struct saa7164_tsport *port,
	tmComResTSFormatDescrHeader_t *tsfmt)
	{
	dprintk(DBGLVL_API, " bFormatIndex = 0x%x\n", tsfmt->bFormatIndex);
	dprintk(DBGLVL_API, " bDataOffset = 0x%x\n", tsfmt->bDataOffset);
	dprintk(DBGLVL_API, " bPacketLength= 0x%x\n", tsfmt->bPacketLength);
	dprintk(DBGLVL_API, " bStrideLength= 0x%x\n", tsfmt->bStrideLength);
	dprintk(DBGLVL_API, " bguid = (....)\n");

	/* Cache the hardware configuration in the port */

	port->bufcounter = port->hwcfg.BARLocation;
	port->pitch = port->hwcfg.BARLocation + (2 * sizeof(u32));
	port->bufsize = port->hwcfg.BARLocation + (3 * sizeof(u32));
	port->bufoffset = port->hwcfg.BARLocation + (4 * sizeof(u32));
	port->bufptr32l = port->hwcfg.BARLocation +
	(4 * sizeof(u32)) +
	(sizeof(u32) * port->hwcfg.buffercount) + sizeof(u32);
	port->bufptr32h = port->hwcfg.BARLocation +
	(4 * sizeof(u32)) +
	(sizeof(u32) * port->hwcfg.buffercount);
	port->bufptr64 = port->hwcfg.BARLocation +
	(4 * sizeof(u32)) +
	(sizeof(u32) * port->hwcfg.buffercount);
	dprintk(DBGLVL_API, " = port->hwcfg.BARLocation = 0x%x\n",
	port->hwcfg.BARLocation);

	dprintk(DBGLVL_API, " = VS_FORMAT_MPEGTS (becomes dev->ts[%d])\n",
	port->nr);

	return 0;
	}

	int saa7164_api_dump_subdevs(struct saa7164_dev dev, u8 buf, int len)
	{
	struct saa7164_tsport *port = 0;
	u32 idx, next_offset;
	int i;
	tmComResDescrHeader_t hdr, t;
	tmComResExtDevDescrHeader_t *exthdr;
	tmComResPathDescrHeader_t *pathhdr;
	tmComResAntTermDescrHeader_t *anttermhdr;
	tmComResTunerDescrHeader_t *tunerunithdr;
	tmComResDMATermDescrHeader_t *vcoutputtermhdr;
	tmComResTSFormatDescrHeader_t *tsfmt;
	u32 currpath = 0;

	dprintk(DBGLVL_API,
	"%s(?,?,%d) sizeof(tmComResDescrHeader_t) = %d bytes\n",
	__func__, len, (u32)sizeof(tmComResDescrHeader_t));

	for (idx = 0; idx < (len - sizeof(tmComResDescrHeader_t)); ) {

	hdr = (tmComResDescrHeader_t *)(buf + idx);

	if (hdr->type != CS_INTERFACE)
	return SAA_ERR_NOT_SUPPORTED;

	dprintk(DBGLVL_API, "@ 0x%x = \n", idx);
	switch (hdr->subtype) {
	case GENERAL_REQUEST:
	dprintk(DBGLVL_API, " GENERAL_REQUEST\n");
	break;
	case VC_TUNER_PATH:
	dprintk(DBGLVL_API, " VC_TUNER_PATH\n");
	pathhdr = (tmComResPathDescrHeader_t *)(buf + idx);
	dprintk(DBGLVL_API, " pathid = 0x%x\n",
	pathhdr->pathid);
	currpath = pathhdr->pathid;
	break;
	case VC_INPUT_TERMINAL:
	dprintk(DBGLVL_API, " VC_INPUT_TERMINAL\n");
	anttermhdr =
	(tmComResAntTermDescrHeader_t *)(buf + idx);
	dprintk(DBGLVL_API, " terminalid = 0x%x\n",
	anttermhdr->terminalid);
	dprintk(DBGLVL_API, " terminaltype = 0x%x\n",
	anttermhdr->terminaltype);
	switch (anttermhdr->terminaltype) {
	case ITT_ANTENNA:
	dprintk(DBGLVL_API, " = ITT_ANTENNA\n");
	break;
	case LINE_CONNECTOR:
	dprintk(DBGLVL_API, " = LINE_CONNECTOR\n");
	break;
	case SPDIF_CONNECTOR:
	dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n");
	break;
	case COMPOSITE_CONNECTOR:
	dprintk(DBGLVL_API,
	" = COMPOSITE_CONNECTOR\n");
	break;
	case SVIDEO_CONNECTOR:
	dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n");
	break;
	case COMPONENT_CONNECTOR:
	dprintk(DBGLVL_API,
	" = COMPONENT_CONNECTOR\n");
	break;
	case STANDARD_DMA:
	dprintk(DBGLVL_API, " = STANDARD_DMA\n");
	break;
	default:
	dprintk(DBGLVL_API, " = undefined (0x%x)\n",
	anttermhdr->terminaltype);
	}
	dprintk(DBGLVL_API, " assocterminal= 0x%x\n",
	anttermhdr->assocterminal);
	dprintk(DBGLVL_API, " iterminal = 0x%x\n",
	anttermhdr->iterminal);
	dprintk(DBGLVL_API, " controlsize = 0x%x\n",
	anttermhdr->controlsize);
	break;
	case VC_OUTPUT_TERMINAL:
	dprintk(DBGLVL_API, " VC_OUTPUT_TERMINAL\n");
	vcoutputtermhdr =
	(tmComResDMATermDescrHeader_t *)(buf + idx);
	dprintk(DBGLVL_API, " unitid = 0x%x\n",
	vcoutputtermhdr->unitid);
	dprintk(DBGLVL_API, " terminaltype = 0x%x\n",
	vcoutputtermhdr->terminaltype);
	switch (vcoutputtermhdr->terminaltype) {
	case ITT_ANTENNA:
	dprintk(DBGLVL_API, " = ITT_ANTENNA\n");
	break;
	case LINE_CONNECTOR:
	dprintk(DBGLVL_API, " = LINE_CONNECTOR\n");
	break;
	case SPDIF_CONNECTOR:
	dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n");
	break;
	case COMPOSITE_CONNECTOR:
	dprintk(DBGLVL_API,
	" = COMPOSITE_CONNECTOR\n");
	break;
	case SVIDEO_CONNECTOR:
	dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n");
	break;
	case COMPONENT_CONNECTOR:
	dprintk(DBGLVL_API,
	" = COMPONENT_CONNECTOR\n");
	break;
	case STANDARD_DMA:
	dprintk(DBGLVL_API, " = STANDARD_DMA\n");
	break;
	default:
	dprintk(DBGLVL_API, " = undefined (0x%x)\n",
	vcoutputtermhdr->terminaltype);
	}
	dprintk(DBGLVL_API, " assocterminal= 0x%x\n",
	vcoutputtermhdr->assocterminal);
	dprintk(DBGLVL_API, " sourceid = 0x%x\n",
	vcoutputtermhdr->sourceid);
	dprintk(DBGLVL_API, " iterminal = 0x%x\n",
	vcoutputtermhdr->iterminal);
	dprintk(DBGLVL_API, " BARLocation = 0x%x\n",
	vcoutputtermhdr->BARLocation);
	dprintk(DBGLVL_API, " flags = 0x%x\n",
	vcoutputtermhdr->flags);
	dprintk(DBGLVL_API, " interruptid = 0x%x\n",
	vcoutputtermhdr->interruptid);
	dprintk(DBGLVL_API, " buffercount = 0x%x\n",
	vcoutputtermhdr->buffercount);
	dprintk(DBGLVL_API, " metadatasize = 0x%x\n",
	vcoutputtermhdr->metadatasize);
	dprintk(DBGLVL_API, " controlsize = 0x%x\n",
	vcoutputtermhdr->controlsize);
	dprintk(DBGLVL_API, " numformats = 0x%x\n",
	vcoutputtermhdr->numformats);

	t = (tmComResDescrHeader_t *)
	((tmComResDMATermDescrHeader_t *)(buf + idx));
	next_offset = idx + (vcoutputtermhdr->len);
	for (i = 0; i < vcoutputtermhdr->numformats; i++) {
	t = (tmComResDescrHeader_t *)
	(buf + next_offset);
	switch (t->subtype) {
	case VS_FORMAT_MPEG2TS:
	tsfmt =
	(tmComResTSFormatDescrHeader_t *)t;
	if (currpath == 1)
	port = &dev->ts1;
	else
	port = &dev->ts2;
	memcpy(&port->hwcfg, vcoutputtermhdr,
	sizeof(*vcoutputtermhdr));
	saa7164_api_configure_port_mpeg2ts(dev,
	port, tsfmt);
	break;
	case VS_FORMAT_MPEG2PS:
	dprintk(DBGLVL_API,
	" = VS_FORMAT_MPEG2PS\n");
	break;
	case VS_FORMAT_VBI:
	dprintk(DBGLVL_API,
	" = VS_FORMAT_VBI\n");
	break;
	case VS_FORMAT_RDS:
	dprintk(DBGLVL_API,
	" = VS_FORMAT_RDS\n");
	break;
	case VS_FORMAT_UNCOMPRESSED:
	dprintk(DBGLVL_API,
	" = VS_FORMAT_UNCOMPRESSED\n");
	break;
	case VS_FORMAT_TYPE:
	dprintk(DBGLVL_API,
	" = VS_FORMAT_TYPE\n");
	break;
	default:
	dprintk(DBGLVL_API,
	" = undefined (0x%x)\n",
	t->subtype);
	}
	next_offset += t->len;
	}

	break;
	case TUNER_UNIT:
	dprintk(DBGLVL_API, " TUNER_UNIT\n");
	tunerunithdr =
	(tmComResTunerDescrHeader_t *)(buf + idx);
	dprintk(DBGLVL_API, " unitid = 0x%x\n",
	tunerunithdr->unitid);
	dprintk(DBGLVL_API, " sourceid = 0x%x\n",
	tunerunithdr->sourceid);
	dprintk(DBGLVL_API, " iunit = 0x%x\n",
	tunerunithdr->iunit);
	dprintk(DBGLVL_API, " tuningstandards = 0x%x\n",
	tunerunithdr->tuningstandards);
	dprintk(DBGLVL_API, " controlsize = 0x%x\n",
	tunerunithdr->controlsize);
	dprintk(DBGLVL_API, " controls = 0x%x\n",
	tunerunithdr->controls);
	break;
	case VC_SELECTOR_UNIT:
	dprintk(DBGLVL_API, " VC_SELECTOR_UNIT\n");
	break;
	case VC_PROCESSING_UNIT:
	dprintk(DBGLVL_API, " VC_PROCESSING_UNIT\n");
	break;
	case FEATURE_UNIT:
	dprintk(DBGLVL_API, " FEATURE_UNIT\n");
	break;
	case ENCODER_UNIT:
	dprintk(DBGLVL_API, " ENCODER_UNIT\n");
	break;
	case EXTENSION_UNIT:
	dprintk(DBGLVL_API, " EXTENSION_UNIT\n");
	exthdr = (tmComResExtDevDescrHeader_t *)(buf + idx);
	dprintk(DBGLVL_API, " unitid = 0x%x\n",
	exthdr->unitid);
	dprintk(DBGLVL_API, " deviceid = 0x%x\n",
	exthdr->deviceid);
	dprintk(DBGLVL_API, " devicetype = 0x%x\n",
	exthdr->devicetype);
	if (exthdr->devicetype & 0x1)
	dprintk(DBGLVL_API, " = Decoder Device\n");
	if (exthdr->devicetype & 0x2)
	dprintk(DBGLVL_API, " = GPIO Source\n");
	if (exthdr->devicetype & 0x4)
	dprintk(DBGLVL_API, " = Video Decoder\n");
	if (exthdr->devicetype & 0x8)
	dprintk(DBGLVL_API, " = Audio Decoder\n");
	if (exthdr->devicetype & 0x20)
	dprintk(DBGLVL_API, " = Crossbar\n");
	if (exthdr->devicetype & 0x40)
	dprintk(DBGLVL_API, " = Tuner\n");
	if (exthdr->devicetype & 0x80)
	dprintk(DBGLVL_API, " = IF PLL\n");
	if (exthdr->devicetype & 0x100)
	dprintk(DBGLVL_API, " = Demodulator\n");
	if (exthdr->devicetype & 0x200)
	dprintk(DBGLVL_API, " = RDS Decoder\n");
	if (exthdr->devicetype & 0x400)
	dprintk(DBGLVL_API, " = Encoder\n");
	if (exthdr->devicetype & 0x800)
	dprintk(DBGLVL_API, " = IR Decoder\n");
	if (exthdr->devicetype & 0x1000)
	dprintk(DBGLVL_API, " = EEPROM\n");
	if (exthdr->devicetype & 0x2000)
	dprintk(DBGLVL_API,
	" = VBI Decoder\n");
	if (exthdr->devicetype & 0x10000)
	dprintk(DBGLVL_API,
	" = Streaming Device\n");
	if (exthdr->devicetype & 0x20000)
	dprintk(DBGLVL_API,
	" = DRM Device\n");
	if (exthdr->devicetype & 0x40000000)
	dprintk(DBGLVL_API,
	" = Generic Device\n");
	if (exthdr->devicetype & 0x80000000)
	dprintk(DBGLVL_API,
	" = Config Space Device\n");
	dprintk(DBGLVL_API, " numgpiopins = 0x%x\n",
	exthdr->numgpiopins);
	dprintk(DBGLVL_API, " numgpiogroups = 0x%x\n",
	exthdr->numgpiogroups);
	dprintk(DBGLVL_API, " controlsize = 0x%x\n",
	exthdr->controlsize);
	break;
	case PVC_INFRARED_UNIT:
	dprintk(DBGLVL_API, " PVC_INFRARED_UNIT\n");
	break;
	case DRM_UNIT:
	dprintk(DBGLVL_API, " DRM_UNIT\n");
	break;
	default:
	dprintk(DBGLVL_API, "default %d\n", hdr->subtype);
	}

	dprintk(DBGLVL_API, " 1.%x\n", hdr->len);
	dprintk(DBGLVL_API, " 2.%x\n", hdr->type);
	dprintk(DBGLVL_API, " 3.%x\n", hdr->subtype);
	dprintk(DBGLVL_API, " 4.%x\n", hdr->unitid);

	idx += hdr->len;
	}

	return 0;
	}

	int saa7164_api_enum_subdevs(struct saa7164_dev *dev)
	{
	int ret;
	u32 buflen = 0;
	u8 *buf;

	dprintk(DBGLVL_API, "%s()\n", __func__);

	/* Get the total descriptor length */
	ret = saa7164_cmd_send(dev, 0, GET_LEN,
	GET_DESCRIPTORS_CONTROL, sizeof(buflen), &buflen);
	if (ret != SAA_OK)
	printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);

	dprintk(DBGLVL_API, "%s() total descriptor size = %d bytes.\n",
	__func__, buflen);

	/* Allocate enough storage for all of the descs */
	buf = kzalloc(buflen, GFP_KERNEL);
	if (buf == NULL)
	return SAA_ERR_NO_RESOURCES;

	/* Retrieve them */
	ret = saa7164_cmd_send(dev, 0, GET_CUR,
	GET_DESCRIPTORS_CONTROL, buflen, buf);
	if (ret != SAA_OK) {
	printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
	goto out;
	}

	if (saa_debug & DBGLVL_API)
	saa7164_dumphex16(dev, buf, (buflen/16)*16);

	saa7164_api_dump_subdevs(dev, buf, buflen);

	out:
	kfree(buf);
	return ret;
	}

	int saa7164_api_i2c_read(struct saa7164_i2c bus, u8 addr, u32 reglen, u8 reg,
	u32 datalen, u8 *data)
	{
	struct saa7164_dev *dev = bus->dev;
	u16 len = 0;
	int unitid;
	u32 regval;
	u8 buf[256];
	int ret;

	dprintk(DBGLVL_API, "%s()\n", __func__);

	if (reglen > 4)
	return -EIO;

	if (reglen == 1)
	regval = *(reg);
	else
	if (reglen == 2)
	regval = (((reg) << 8) \|\| (reg+1));
	else
	if (reglen == 3)
	regval = (((reg) << 16) \| ((reg+1) << 8) \| *(reg+2));
	else
	if (reglen == 4)
	regval = (((reg) << 24) \| ((reg+1) << 16) \|
	((reg+2) << 8) \| (reg+3));

	/* Prepare the send buffer */
	/* Bytes 00-03 source register length
	* 04-07 source bytes to read
	* 08... register address
	*/
	memset(buf, 0, sizeof(buf));
	memcpy((buf + 2 * sizeof(u32) + 0), reg, reglen);
	((u32 )(buf + 0 * sizeof(u32))) = reglen;
	((u32 )(buf + 1 * sizeof(u32))) = datalen;

	unitid = saa7164_i2caddr_to_unitid(bus, addr);
	if (unitid < 0) {
	printk(KERN_ERR
	"%s() error, cannot translate regaddr 0x%x to unitid\n",
	__func__, addr);
	return -EIO;
	}

	ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN,
	EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len);
	if (ret != SAA_OK) {
	printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret);
	return -EIO;
	}

	dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len);

	if (saa_debug & DBGLVL_I2C)
	saa7164_dumphex16(dev, buf, 2 * 16);

	ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR,
	EXU_REGISTER_ACCESS_CONTROL, len, &buf);
	if (ret != SAA_OK)
	printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);
	else {
	if (saa_debug & DBGLVL_I2C)
	saa7164_dumphex16(dev, buf, sizeof(buf));
	memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen);
	}

	return ret == SAA_OK ? 0 : -EIO;
	}

	/* For a given 8 bit i2c address device, write the buffer */
	int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, u32 datalen,
	u8 *data)
	{
	struct saa7164_dev *dev = bus->dev;
	u16 len = 0;
	int unitid;
	int reglen;
	u8 buf[256];
	int ret;

	dprintk(DBGLVL_API, "%s()\n", __func__);

	if ((datalen == 0) \|\| (datalen > 232))
	return -EIO;

	memset(buf, 0, sizeof(buf));

	unitid = saa7164_i2caddr_to_unitid(bus, addr);
	if (unitid < 0) {
	printk(KERN_ERR
	"%s() error, cannot translate regaddr 0x%x to unitid\n",
	__func__, addr);
	return -EIO;
	}

	reglen = saa7164_i2caddr_to_reglen(bus, addr);
	if (reglen < 0) {
	printk(KERN_ERR
	"%s() error, cannot translate regaddr to reglen\n",
	__func__);
	return -EIO;
	}

	ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN,
	EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len);
	if (ret != SAA_OK) {
	printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret);
	return -EIO;
	}

	dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len);

	/* Prepare the send buffer */
	/* Bytes 00-03 dest register length
	* 04-07 dest bytes to write
	* 08... register address
	*/
	((u32 )(buf + 0 * sizeof(u32))) = reglen;
	((u32 )(buf + 1 * sizeof(u32))) = datalen - reglen;
	memcpy((buf + 2 * sizeof(u32)), data, datalen);

	if (saa_debug & DBGLVL_I2C)
	saa7164_dumphex16(dev, buf, sizeof(buf));

	ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR,
	EXU_REGISTER_ACCESS_CONTROL, len, &buf);
	if (ret != SAA_OK)
	printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);

	return ret == SAA_OK ? 0 : -EIO;
	}


	int saa7164_api_modify_gpio(struct saa7164_dev *dev, u8 unitid,
	u8 pin, u8 state)
	{
	int ret;
	tmComResGPIO_t t;

	dprintk(DBGLVL_API, "%s(0x%x, %d, %d)\n",
	__func__, unitid, pin, state);

	if ((pin > 7) \|\| (state > 2))
	return SAA_ERR_BAD_PARAMETER;

	t.pin = pin;
	t.state = state;

	ret = saa7164_cmd_send(dev, unitid, SET_CUR,
	EXU_GPIO_CONTROL, sizeof(t), &t);
	if (ret != SAA_OK)
	printk(KERN_ERR "%s() error, ret = 0x%x\n",
	__func__, ret);

	return ret;
	}

	int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid,
	u8 pin)
	{
	return saa7164_api_modify_gpio(dev, unitid, pin, 1);
	}

	int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid,
	u8 pin)
	{
	return saa7164_api_modify_gpio(dev, unitid, pin, 0);
	}