| /* |
| * Copyright (c) 2013 Realtek Semiconductor Corp. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/signal.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/mii.h> |
| #include <linux/ethtool.h> |
| #include <linux/usb.h> |
| #include <linux/crc32.h> |
| #include <linux/if_vlan.h> |
| #include <linux/uaccess.h> |
| |
| /* Version Information */ |
| #define DRIVER_VERSION "v1.0.0 (2013/05/03)" |
| #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>" |
| #define DRIVER_DESC "Realtek RTL8152 Based USB 2.0 Ethernet Adapters" |
| #define MODULENAME "r8152" |
| |
| #define R8152_PHY_ID 32 |
| |
| #define PLA_IDR 0xc000 |
| #define PLA_RCR 0xc010 |
| #define PLA_RMS 0xc016 |
| #define PLA_RXFIFO_CTRL0 0xc0a0 |
| #define PLA_RXFIFO_CTRL1 0xc0a4 |
| #define PLA_RXFIFO_CTRL2 0xc0a8 |
| #define PLA_FMC 0xc0b4 |
| #define PLA_CFG_WOL 0xc0b6 |
| #define PLA_MAR 0xcd00 |
| #define PAL_BDC_CR 0xd1a0 |
| #define PLA_LEDSEL 0xdd90 |
| #define PLA_LED_FEATURE 0xdd92 |
| #define PLA_PHYAR 0xde00 |
| #define PLA_GPHY_INTR_IMR 0xe022 |
| #define PLA_EEE_CR 0xe040 |
| #define PLA_EEEP_CR 0xe080 |
| #define PLA_MAC_PWR_CTRL 0xe0c0 |
| #define PLA_TCR0 0xe610 |
| #define PLA_TCR1 0xe612 |
| #define PLA_TXFIFO_CTRL 0xe618 |
| #define PLA_RSTTELLY 0xe800 |
| #define PLA_CR 0xe813 |
| #define PLA_CRWECR 0xe81c |
| #define PLA_CONFIG5 0xe822 |
| #define PLA_PHY_PWR 0xe84c |
| #define PLA_OOB_CTRL 0xe84f |
| #define PLA_CPCR 0xe854 |
| #define PLA_MISC_0 0xe858 |
| #define PLA_MISC_1 0xe85a |
| #define PLA_OCP_GPHY_BASE 0xe86c |
| #define PLA_TELLYCNT 0xe890 |
| #define PLA_SFF_STS_7 0xe8de |
| #define PLA_PHYSTATUS 0xe908 |
| #define PLA_BP_BA 0xfc26 |
| #define PLA_BP_0 0xfc28 |
| #define PLA_BP_1 0xfc2a |
| #define PLA_BP_2 0xfc2c |
| #define PLA_BP_3 0xfc2e |
| #define PLA_BP_4 0xfc30 |
| #define PLA_BP_5 0xfc32 |
| #define PLA_BP_6 0xfc34 |
| #define PLA_BP_7 0xfc36 |
| |
| #define USB_DEV_STAT 0xb808 |
| #define USB_USB_CTRL 0xd406 |
| #define USB_PHY_CTRL 0xd408 |
| #define USB_TX_AGG 0xd40a |
| #define USB_RX_BUF_TH 0xd40c |
| #define USB_USB_TIMER 0xd428 |
| #define USB_PM_CTRL_STATUS 0xd432 |
| #define USB_TX_DMA 0xd434 |
| #define USB_UPS_CTRL 0xd800 |
| #define USB_BP_BA 0xfc26 |
| #define USB_BP_0 0xfc28 |
| #define USB_BP_1 0xfc2a |
| #define USB_BP_2 0xfc2c |
| #define USB_BP_3 0xfc2e |
| #define USB_BP_4 0xfc30 |
| #define USB_BP_5 0xfc32 |
| #define USB_BP_6 0xfc34 |
| #define USB_BP_7 0xfc36 |
| |
| /* OCP Registers */ |
| #define OCP_ALDPS_CONFIG 0x2010 |
| #define OCP_EEE_CONFIG1 0x2080 |
| #define OCP_EEE_CONFIG2 0x2092 |
| #define OCP_EEE_CONFIG3 0x2094 |
| #define OCP_EEE_AR 0xa41a |
| #define OCP_EEE_DATA 0xa41c |
| |
| /* PLA_RCR */ |
| #define RCR_AAP 0x00000001 |
| #define RCR_APM 0x00000002 |
| #define RCR_AM 0x00000004 |
| #define RCR_AB 0x00000008 |
| #define RCR_ACPT_ALL (RCR_AAP | RCR_APM | RCR_AM | RCR_AB) |
| |
| /* PLA_RXFIFO_CTRL0 */ |
| #define RXFIFO_THR1_NORMAL 0x00080002 |
| #define RXFIFO_THR1_OOB 0x01800003 |
| |
| /* PLA_RXFIFO_CTRL1 */ |
| #define RXFIFO_THR2_FULL 0x00000060 |
| #define RXFIFO_THR2_HIGH 0x00000038 |
| #define RXFIFO_THR2_OOB 0x0000004a |
| |
| /* PLA_RXFIFO_CTRL2 */ |
| #define RXFIFO_THR3_FULL 0x00000078 |
| #define RXFIFO_THR3_HIGH 0x00000048 |
| #define RXFIFO_THR3_OOB 0x0000005a |
| |
| /* PLA_TXFIFO_CTRL */ |
| #define TXFIFO_THR_NORMAL 0x00400008 |
| |
| /* PLA_FMC */ |
| #define FMC_FCR_MCU_EN 0x0001 |
| |
| /* PLA_EEEP_CR */ |
| #define EEEP_CR_EEEP_TX 0x0002 |
| |
| /* PLA_TCR0 */ |
| #define TCR0_TX_EMPTY 0x0800 |
| #define TCR0_AUTO_FIFO 0x0080 |
| |
| /* PLA_TCR1 */ |
| #define VERSION_MASK 0x7cf0 |
| |
| /* PLA_CR */ |
| #define CR_RST 0x10 |
| #define CR_RE 0x08 |
| #define CR_TE 0x04 |
| |
| /* PLA_CRWECR */ |
| #define CRWECR_NORAML 0x00 |
| #define CRWECR_CONFIG 0xc0 |
| |
| /* PLA_OOB_CTRL */ |
| #define NOW_IS_OOB 0x80 |
| #define TXFIFO_EMPTY 0x20 |
| #define RXFIFO_EMPTY 0x10 |
| #define LINK_LIST_READY 0x02 |
| #define DIS_MCU_CLROOB 0x01 |
| #define FIFO_EMPTY (TXFIFO_EMPTY | RXFIFO_EMPTY) |
| |
| /* PLA_MISC_1 */ |
| #define RXDY_GATED_EN 0x0008 |
| |
| /* PLA_SFF_STS_7 */ |
| #define RE_INIT_LL 0x8000 |
| #define MCU_BORW_EN 0x4000 |
| |
| /* PLA_CPCR */ |
| #define CPCR_RX_VLAN 0x0040 |
| |
| /* PLA_CFG_WOL */ |
| #define MAGIC_EN 0x0001 |
| |
| /* PAL_BDC_CR */ |
| #define ALDPS_PROXY_MODE 0x0001 |
| |
| /* PLA_CONFIG5 */ |
| #define LAN_WAKE_EN 0x0002 |
| |
| /* PLA_LED_FEATURE */ |
| #define LED_MODE_MASK 0x0700 |
| |
| /* PLA_PHY_PWR */ |
| #define TX_10M_IDLE_EN 0x0080 |
| #define PFM_PWM_SWITCH 0x0040 |
| |
| /* PLA_MAC_PWR_CTRL */ |
| #define D3_CLK_GATED_EN 0x00004000 |
| #define MCU_CLK_RATIO 0x07010f07 |
| #define MCU_CLK_RATIO_MASK 0x0f0f0f0f |
| |
| /* PLA_GPHY_INTR_IMR */ |
| #define GPHY_STS_MSK 0x0001 |
| #define SPEED_DOWN_MSK 0x0002 |
| #define SPDWN_RXDV_MSK 0x0004 |
| #define SPDWN_LINKCHG_MSK 0x0008 |
| |
| /* PLA_PHYAR */ |
| #define PHYAR_FLAG 0x80000000 |
| |
| /* PLA_EEE_CR */ |
| #define EEE_RX_EN 0x0001 |
| #define EEE_TX_EN 0x0002 |
| |
| /* USB_DEV_STAT */ |
| #define STAT_SPEED_MASK 0x0006 |
| #define STAT_SPEED_HIGH 0x0000 |
| #define STAT_SPEED_FULL 0x0001 |
| |
| /* USB_TX_AGG */ |
| #define TX_AGG_MAX_THRESHOLD 0x03 |
| |
| /* USB_RX_BUF_TH */ |
| #define RX_BUF_THR 0x7a120180 |
| |
| /* USB_TX_DMA */ |
| #define TEST_MODE_DISABLE 0x00000001 |
| #define TX_SIZE_ADJUST1 0x00000100 |
| |
| /* USB_UPS_CTRL */ |
| #define POWER_CUT 0x0100 |
| |
| /* USB_PM_CTRL_STATUS */ |
| #define RWSUME_INDICATE 0x0001 |
| |
| /* USB_USB_CTRL */ |
| #define RX_AGG_DISABLE 0x0010 |
| |
| /* OCP_ALDPS_CONFIG */ |
| #define ENPWRSAVE 0x8000 |
| #define ENPDNPS 0x0200 |
| #define LINKENA 0x0100 |
| #define DIS_SDSAVE 0x0010 |
| |
| /* OCP_EEE_CONFIG1 */ |
| #define RG_TXLPI_MSK_HFDUP 0x8000 |
| #define RG_MATCLR_EN 0x4000 |
| #define EEE_10_CAP 0x2000 |
| #define EEE_NWAY_EN 0x1000 |
| #define TX_QUIET_EN 0x0200 |
| #define RX_QUIET_EN 0x0100 |
| #define SDRISETIME 0x0010 /* bit 4 ~ 6 */ |
| #define RG_RXLPI_MSK_HFDUP 0x0008 |
| #define SDFALLTIME 0x0007 /* bit 0 ~ 2 */ |
| |
| /* OCP_EEE_CONFIG2 */ |
| #define RG_LPIHYS_NUM 0x7000 /* bit 12 ~ 15 */ |
| #define RG_DACQUIET_EN 0x0400 |
| #define RG_LDVQUIET_EN 0x0200 |
| #define RG_CKRSEL 0x0020 |
| #define RG_EEEPRG_EN 0x0010 |
| |
| /* OCP_EEE_CONFIG3 */ |
| #define FST_SNR_EYE_R 0x1500 /* bit 7 ~ 15 */ |
| #define RG_LFS_SEL 0x0060 /* bit 6 ~ 5 */ |
| #define MSK_PH 0x0006 /* bit 0 ~ 3 */ |
| |
| /* OCP_EEE_AR */ |
| /* bit[15:14] function */ |
| #define FUN_ADDR 0x0000 |
| #define FUN_DATA 0x4000 |
| /* bit[4:0] device addr */ |
| #define DEVICE_ADDR 0x0007 |
| |
| /* OCP_EEE_DATA */ |
| #define EEE_ADDR 0x003C |
| #define EEE_DATA 0x0002 |
| |
| enum rtl_register_content { |
| _100bps = 0x08, |
| _10bps = 0x04, |
| LINK_STATUS = 0x02, |
| FULL_DUP = 0x01, |
| }; |
| |
| #define RTL8152_REQT_READ 0xc0 |
| #define RTL8152_REQT_WRITE 0x40 |
| #define RTL8152_REQ_GET_REGS 0x05 |
| #define RTL8152_REQ_SET_REGS 0x05 |
| |
| #define BYTE_EN_DWORD 0xff |
| #define BYTE_EN_WORD 0x33 |
| #define BYTE_EN_BYTE 0x11 |
| #define BYTE_EN_SIX_BYTES 0x3f |
| #define BYTE_EN_START_MASK 0x0f |
| #define BYTE_EN_END_MASK 0xf0 |
| |
| #define RTL8152_RMS (VLAN_ETH_FRAME_LEN + VLAN_HLEN) |
| #define RTL8152_TX_TIMEOUT (HZ) |
| |
| /* rtl8152 flags */ |
| enum rtl8152_flags { |
| RTL8152_UNPLUG = 0, |
| RX_URB_FAIL, |
| RTL8152_SET_RX_MODE, |
| WORK_ENABLE |
| }; |
| |
| /* Define these values to match your device */ |
| #define VENDOR_ID_REALTEK 0x0bda |
| #define PRODUCT_ID_RTL8152 0x8152 |
| |
| #define MCU_TYPE_PLA 0x0100 |
| #define MCU_TYPE_USB 0x0000 |
| |
| struct rx_desc { |
| u32 opts1; |
| #define RX_LEN_MASK 0x7fff |
| u32 opts2; |
| u32 opts3; |
| u32 opts4; |
| u32 opts5; |
| u32 opts6; |
| }; |
| |
| struct tx_desc { |
| u32 opts1; |
| #define TX_FS (1 << 31) /* First segment of a packet */ |
| #define TX_LS (1 << 30) /* Final segment of a packet */ |
| #define TX_LEN_MASK 0xffff |
| u32 opts2; |
| }; |
| |
| struct r8152 { |
| unsigned long flags; |
| struct usb_device *udev; |
| struct tasklet_struct tl; |
| struct net_device *netdev; |
| struct urb *rx_urb, *tx_urb; |
| struct sk_buff *tx_skb, *rx_skb; |
| struct delayed_work schedule; |
| struct mii_if_info mii; |
| u32 msg_enable; |
| u16 ocp_base; |
| u8 version; |
| u8 speed; |
| }; |
| |
| enum rtl_version { |
| RTL_VER_UNKNOWN = 0, |
| RTL_VER_01, |
| RTL_VER_02 |
| }; |
| |
| /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). |
| * The RTL chips use a 64 element hash table based on the Ethernet CRC. |
| */ |
| static const int multicast_filter_limit = 32; |
| |
| static |
| int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) |
| { |
| return usb_control_msg(tp->udev, usb_rcvctrlpipe(tp->udev, 0), |
| RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, |
| value, index, data, size, 500); |
| } |
| |
| static |
| int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) |
| { |
| return usb_control_msg(tp->udev, usb_sndctrlpipe(tp->udev, 0), |
| RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, |
| value, index, data, size, 500); |
| } |
| |
| static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size, |
| void *data, u16 type) |
| { |
| u16 limit = 64; |
| int ret = 0; |
| |
| if (test_bit(RTL8152_UNPLUG, &tp->flags)) |
| return -ENODEV; |
| |
| /* both size and indix must be 4 bytes align */ |
| if ((size & 3) || !size || (index & 3) || !data) |
| return -EPERM; |
| |
| if ((u32)index + (u32)size > 0xffff) |
| return -EPERM; |
| |
| while (size) { |
| if (size > limit) { |
| ret = get_registers(tp, index, type, limit, data); |
| if (ret < 0) |
| break; |
| |
| index += limit; |
| data += limit; |
| size -= limit; |
| } else { |
| ret = get_registers(tp, index, type, size, data); |
| if (ret < 0) |
| break; |
| |
| index += size; |
| data += size; |
| size = 0; |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen, |
| u16 size, void *data, u16 type) |
| { |
| int ret; |
| u16 byteen_start, byteen_end, byen; |
| u16 limit = 512; |
| |
| if (test_bit(RTL8152_UNPLUG, &tp->flags)) |
| return -ENODEV; |
| |
| /* both size and indix must be 4 bytes align */ |
| if ((size & 3) || !size || (index & 3) || !data) |
| return -EPERM; |
| |
| if ((u32)index + (u32)size > 0xffff) |
| return -EPERM; |
| |
| byteen_start = byteen & BYTE_EN_START_MASK; |
| byteen_end = byteen & BYTE_EN_END_MASK; |
| |
| byen = byteen_start | (byteen_start << 4); |
| ret = set_registers(tp, index, type | byen, 4, data); |
| if (ret < 0) |
| goto error1; |
| |
| index += 4; |
| data += 4; |
| size -= 4; |
| |
| if (size) { |
| size -= 4; |
| |
| while (size) { |
| if (size > limit) { |
| ret = set_registers(tp, index, |
| type | BYTE_EN_DWORD, |
| limit, data); |
| if (ret < 0) |
| goto error1; |
| |
| index += limit; |
| data += limit; |
| size -= limit; |
| } else { |
| ret = set_registers(tp, index, |
| type | BYTE_EN_DWORD, |
| size, data); |
| if (ret < 0) |
| goto error1; |
| |
| index += size; |
| data += size; |
| size = 0; |
| break; |
| } |
| } |
| |
| byen = byteen_end | (byteen_end >> 4); |
| ret = set_registers(tp, index, type | byen, 4, data); |
| if (ret < 0) |
| goto error1; |
| } |
| |
| error1: |
| return ret; |
| } |
| |
| static inline |
| int pla_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data) |
| { |
| return generic_ocp_read(tp, index, size, data, MCU_TYPE_PLA); |
| } |
| |
| static inline |
| int pla_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data) |
| { |
| return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_PLA); |
| } |
| |
| static inline |
| int usb_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data) |
| { |
| return generic_ocp_read(tp, index, size, data, MCU_TYPE_USB); |
| } |
| |
| static inline |
| int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data) |
| { |
| return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_USB); |
| } |
| |
| static u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index) |
| { |
| u32 data; |
| |
| if (type == MCU_TYPE_PLA) |
| pla_ocp_read(tp, index, sizeof(data), &data); |
| else |
| usb_ocp_read(tp, index, sizeof(data), &data); |
| |
| return __le32_to_cpu(data); |
| } |
| |
| static void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data) |
| { |
| if (type == MCU_TYPE_PLA) |
| pla_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(data), &data); |
| else |
| usb_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(data), &data); |
| } |
| |
| static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index) |
| { |
| u32 data; |
| u8 shift = index & 2; |
| |
| index &= ~3; |
| |
| if (type == MCU_TYPE_PLA) |
| pla_ocp_read(tp, index, sizeof(data), &data); |
| else |
| usb_ocp_read(tp, index, sizeof(data), &data); |
| |
| data = __le32_to_cpu(data); |
| data >>= (shift * 8); |
| data &= 0xffff; |
| |
| return (u16)data; |
| } |
| |
| static void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data) |
| { |
| u32 tmp, mask = 0xffff; |
| u16 byen = BYTE_EN_WORD; |
| u8 shift = index & 2; |
| |
| data &= mask; |
| |
| if (index & 2) { |
| byen <<= shift; |
| mask <<= (shift * 8); |
| data <<= (shift * 8); |
| index &= ~3; |
| } |
| |
| if (type == MCU_TYPE_PLA) |
| pla_ocp_read(tp, index, sizeof(tmp), &tmp); |
| else |
| usb_ocp_read(tp, index, sizeof(tmp), &tmp); |
| |
| tmp = __le32_to_cpu(tmp) & ~mask; |
| tmp |= data; |
| tmp = __cpu_to_le32(tmp); |
| |
| if (type == MCU_TYPE_PLA) |
| pla_ocp_write(tp, index, byen, sizeof(tmp), &tmp); |
| else |
| usb_ocp_write(tp, index, byen, sizeof(tmp), &tmp); |
| } |
| |
| static u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index) |
| { |
| u32 data; |
| u8 shift = index & 3; |
| |
| index &= ~3; |
| |
| if (type == MCU_TYPE_PLA) |
| pla_ocp_read(tp, index, sizeof(data), &data); |
| else |
| usb_ocp_read(tp, index, sizeof(data), &data); |
| |
| data = __le32_to_cpu(data); |
| data >>= (shift * 8); |
| data &= 0xff; |
| |
| return (u8)data; |
| } |
| |
| static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data) |
| { |
| u32 tmp, mask = 0xff; |
| u16 byen = BYTE_EN_BYTE; |
| u8 shift = index & 3; |
| |
| data &= mask; |
| |
| if (index & 3) { |
| byen <<= shift; |
| mask <<= (shift * 8); |
| data <<= (shift * 8); |
| index &= ~3; |
| } |
| |
| if (type == MCU_TYPE_PLA) |
| pla_ocp_read(tp, index, sizeof(tmp), &tmp); |
| else |
| usb_ocp_read(tp, index, sizeof(tmp), &tmp); |
| |
| tmp = __le32_to_cpu(tmp) & ~mask; |
| tmp |= data; |
| tmp = __cpu_to_le32(tmp); |
| |
| if (type == MCU_TYPE_PLA) |
| pla_ocp_write(tp, index, byen, sizeof(tmp), &tmp); |
| else |
| usb_ocp_write(tp, index, byen, sizeof(tmp), &tmp); |
| } |
| |
| static void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value) |
| { |
| u32 ocp_data; |
| int i; |
| |
| ocp_data = PHYAR_FLAG | ((reg_addr & 0x1f) << 16) | |
| (value & 0xffff); |
| |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_PHYAR, ocp_data); |
| |
| for (i = 20; i > 0; i--) { |
| udelay(25); |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_PHYAR); |
| if (!(ocp_data & PHYAR_FLAG)) |
| break; |
| } |
| udelay(20); |
| } |
| |
| static int r8152_mdio_read(struct r8152 *tp, u32 reg_addr) |
| { |
| u32 ocp_data; |
| int i; |
| |
| ocp_data = (reg_addr & 0x1f) << 16; |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_PHYAR, ocp_data); |
| |
| for (i = 20; i > 0; i--) { |
| udelay(25); |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_PHYAR); |
| if (ocp_data & PHYAR_FLAG) |
| break; |
| } |
| udelay(20); |
| |
| if (!(ocp_data & PHYAR_FLAG)) |
| return -EAGAIN; |
| |
| return (u16)(ocp_data & 0xffff); |
| } |
| |
| static int read_mii_word(struct net_device *netdev, int phy_id, int reg) |
| { |
| struct r8152 *tp = netdev_priv(netdev); |
| |
| if (phy_id != R8152_PHY_ID) |
| return -EINVAL; |
| |
| return r8152_mdio_read(tp, reg); |
| } |
| |
| static |
| void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val) |
| { |
| struct r8152 *tp = netdev_priv(netdev); |
| |
| if (phy_id != R8152_PHY_ID) |
| return; |
| |
| r8152_mdio_write(tp, reg, val); |
| } |
| |
| static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data) |
| { |
| u16 ocp_base, ocp_index; |
| |
| ocp_base = addr & 0xf000; |
| if (ocp_base != tp->ocp_base) { |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base); |
| tp->ocp_base = ocp_base; |
| } |
| |
| ocp_index = (addr & 0x0fff) | 0xb000; |
| ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data); |
| } |
| |
| static inline void set_ethernet_addr(struct r8152 *tp) |
| { |
| struct net_device *dev = tp->netdev; |
| u8 *node_id; |
| |
| node_id = kmalloc(sizeof(u8) * 8, GFP_KERNEL); |
| if (!node_id) { |
| netif_err(tp, probe, dev, "out of memory"); |
| return; |
| } |
| |
| if (pla_ocp_read(tp, PLA_IDR, sizeof(u8) * 8, node_id) < 0) |
| netif_notice(tp, probe, dev, "inet addr fail\n"); |
| else { |
| memcpy(dev->dev_addr, node_id, dev->addr_len); |
| memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); |
| } |
| kfree(node_id); |
| } |
| |
| static int rtl8152_set_mac_address(struct net_device *netdev, void *p) |
| { |
| struct r8152 *tp = netdev_priv(netdev); |
| struct sockaddr *addr = p; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
| |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG); |
| pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, addr->sa_data); |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); |
| |
| return 0; |
| } |
| |
| static int alloc_all_urbs(struct r8152 *tp) |
| { |
| tp->rx_urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!tp->rx_urb) |
| return 0; |
| tp->tx_urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!tp->tx_urb) { |
| usb_free_urb(tp->rx_urb); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static void free_all_urbs(struct r8152 *tp) |
| { |
| usb_free_urb(tp->rx_urb); |
| usb_free_urb(tp->tx_urb); |
| } |
| |
| static struct net_device_stats *rtl8152_get_stats(struct net_device *dev) |
| { |
| return &dev->stats; |
| } |
| |
| static void read_bulk_callback(struct urb *urb) |
| { |
| struct r8152 *tp; |
| unsigned pkt_len; |
| struct sk_buff *skb; |
| struct net_device *netdev; |
| struct net_device_stats *stats; |
| int status = urb->status; |
| int result; |
| struct rx_desc *rx_desc; |
| |
| tp = urb->context; |
| if (!tp) |
| return; |
| if (test_bit(RTL8152_UNPLUG, &tp->flags)) |
| return; |
| netdev = tp->netdev; |
| if (!netif_device_present(netdev)) |
| return; |
| |
| stats = rtl8152_get_stats(netdev); |
| switch (status) { |
| case 0: |
| break; |
| case -ESHUTDOWN: |
| set_bit(RTL8152_UNPLUG, &tp->flags); |
| netif_device_detach(tp->netdev); |
| case -ENOENT: |
| return; /* the urb is in unlink state */ |
| case -ETIME: |
| pr_warn_ratelimited("may be reset is needed?..\n"); |
| goto goon; |
| default: |
| pr_warn_ratelimited("Rx status %d\n", status); |
| goto goon; |
| } |
| |
| /* protect against short packets (tell me why we got some?!?) */ |
| if (urb->actual_length < sizeof(*rx_desc)) |
| goto goon; |
| |
| |
| rx_desc = (struct rx_desc *)urb->transfer_buffer; |
| pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK; |
| if (urb->actual_length < sizeof(struct rx_desc) + pkt_len) |
| goto goon; |
| |
| skb = netdev_alloc_skb_ip_align(netdev, pkt_len); |
| if (!skb) |
| goto goon; |
| |
| memcpy(skb->data, tp->rx_skb->data + sizeof(struct rx_desc), pkt_len); |
| skb_put(skb, pkt_len); |
| skb->protocol = eth_type_trans(skb, netdev); |
| netif_rx(skb); |
| stats->rx_packets++; |
| stats->rx_bytes += pkt_len; |
| goon: |
| usb_fill_bulk_urb(tp->rx_urb, tp->udev, usb_rcvbulkpipe(tp->udev, 1), |
| tp->rx_skb->data, RTL8152_RMS + sizeof(struct rx_desc), |
| (usb_complete_t)read_bulk_callback, tp); |
| result = usb_submit_urb(tp->rx_urb, GFP_ATOMIC); |
| if (result == -ENODEV) { |
| netif_device_detach(tp->netdev); |
| } else if (result) { |
| set_bit(RX_URB_FAIL, &tp->flags); |
| goto resched; |
| } else { |
| clear_bit(RX_URB_FAIL, &tp->flags); |
| } |
| |
| return; |
| resched: |
| tasklet_schedule(&tp->tl); |
| } |
| |
| static void rx_fixup(unsigned long data) |
| { |
| struct r8152 *tp; |
| int status; |
| |
| tp = (struct r8152 *)data; |
| if (!test_bit(WORK_ENABLE, &tp->flags)) |
| return; |
| |
| status = usb_submit_urb(tp->rx_urb, GFP_ATOMIC); |
| if (status == -ENODEV) { |
| netif_device_detach(tp->netdev); |
| } else if (status) { |
| set_bit(RX_URB_FAIL, &tp->flags); |
| goto tlsched; |
| } else { |
| clear_bit(RX_URB_FAIL, &tp->flags); |
| } |
| |
| return; |
| tlsched: |
| tasklet_schedule(&tp->tl); |
| } |
| |
| static void write_bulk_callback(struct urb *urb) |
| { |
| struct r8152 *tp; |
| int status = urb->status; |
| |
| tp = urb->context; |
| if (!tp) |
| return; |
| dev_kfree_skb_irq(tp->tx_skb); |
| if (!netif_device_present(tp->netdev)) |
| return; |
| if (status) |
| dev_info(&urb->dev->dev, "%s: Tx status %d\n", |
| tp->netdev->name, status); |
| tp->netdev->trans_start = jiffies; |
| netif_wake_queue(tp->netdev); |
| } |
| |
| static void rtl8152_tx_timeout(struct net_device *netdev) |
| { |
| struct r8152 *tp = netdev_priv(netdev); |
| struct net_device_stats *stats = rtl8152_get_stats(netdev); |
| netif_warn(tp, tx_err, netdev, "Tx timeout.\n"); |
| usb_unlink_urb(tp->tx_urb); |
| stats->tx_errors++; |
| } |
| |
| static void rtl8152_set_rx_mode(struct net_device *netdev) |
| { |
| struct r8152 *tp = netdev_priv(netdev); |
| |
| if (tp->speed & LINK_STATUS) |
| set_bit(RTL8152_SET_RX_MODE, &tp->flags); |
| } |
| |
| static void _rtl8152_set_rx_mode(struct net_device *netdev) |
| { |
| struct r8152 *tp = netdev_priv(netdev); |
| u32 tmp, *mc_filter; /* Multicast hash filter */ |
| u32 ocp_data; |
| |
| mc_filter = kmalloc(sizeof(u32) * 2, GFP_KERNEL); |
| if (!mc_filter) { |
| netif_err(tp, link, netdev, "out of memory"); |
| return; |
| } |
| |
| clear_bit(RTL8152_SET_RX_MODE, &tp->flags); |
| netif_stop_queue(netdev); |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); |
| ocp_data &= ~RCR_ACPT_ALL; |
| ocp_data |= RCR_AB | RCR_APM; |
| |
| if (netdev->flags & IFF_PROMISC) { |
| /* Unconditionally log net taps. */ |
| netif_notice(tp, link, netdev, "Promiscuous mode enabled\n"); |
| ocp_data |= RCR_AM | RCR_AAP; |
| mc_filter[1] = mc_filter[0] = 0xffffffff; |
| } else if ((netdev_mc_count(netdev) > multicast_filter_limit) || |
| (netdev->flags & IFF_ALLMULTI)) { |
| /* Too many to filter perfectly -- accept all multicasts. */ |
| ocp_data |= RCR_AM; |
| mc_filter[1] = mc_filter[0] = 0xffffffff; |
| } else { |
| struct netdev_hw_addr *ha; |
| |
| mc_filter[1] = mc_filter[0] = 0; |
| netdev_for_each_mc_addr(ha, netdev) { |
| int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26; |
| mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); |
| ocp_data |= RCR_AM; |
| } |
| } |
| |
| tmp = mc_filter[0]; |
| mc_filter[0] = __cpu_to_le32(swab32(mc_filter[1])); |
| mc_filter[1] = __cpu_to_le32(swab32(tmp)); |
| |
| pla_ocp_write(tp, PLA_MAR, BYTE_EN_DWORD, sizeof(u32) * 2, mc_filter); |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); |
| netif_wake_queue(netdev); |
| kfree(mc_filter); |
| } |
| |
| static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb, |
| struct net_device *netdev) |
| { |
| struct r8152 *tp = netdev_priv(netdev); |
| struct net_device_stats *stats = rtl8152_get_stats(netdev); |
| struct tx_desc *tx_desc; |
| int len, res; |
| |
| netif_stop_queue(netdev); |
| len = skb->len; |
| if (skb_header_cloned(skb) || skb_headroom(skb) < sizeof(*tx_desc)) { |
| struct sk_buff *tx_skb; |
| |
| tx_skb = skb_copy_expand(skb, sizeof(*tx_desc), 0, GFP_ATOMIC); |
| dev_kfree_skb_any(skb); |
| if (!tx_skb) { |
| stats->tx_dropped++; |
| netif_wake_queue(netdev); |
| return NETDEV_TX_OK; |
| } |
| skb = tx_skb; |
| } |
| tx_desc = (struct tx_desc *)skb_push(skb, sizeof(*tx_desc)); |
| memset(tx_desc, 0, sizeof(*tx_desc)); |
| tx_desc->opts1 = cpu_to_le32((len & TX_LEN_MASK) | TX_FS | TX_LS); |
| tp->tx_skb = skb; |
| skb_tx_timestamp(skb); |
| usb_fill_bulk_urb(tp->tx_urb, tp->udev, usb_sndbulkpipe(tp->udev, 2), |
| skb->data, skb->len, |
| (usb_complete_t)write_bulk_callback, tp); |
| res = usb_submit_urb(tp->tx_urb, GFP_ATOMIC); |
| if (res) { |
| /* Can we get/handle EPIPE here? */ |
| if (res == -ENODEV) { |
| netif_device_detach(tp->netdev); |
| } else { |
| netif_warn(tp, tx_err, netdev, |
| "failed tx_urb %d\n", res); |
| stats->tx_errors++; |
| netif_start_queue(netdev); |
| } |
| } else { |
| stats->tx_packets++; |
| stats->tx_bytes += skb->len; |
| } |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static void r8152b_reset_packet_filter(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC); |
| ocp_data &= ~FMC_FCR_MCU_EN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data); |
| ocp_data |= FMC_FCR_MCU_EN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data); |
| } |
| |
| static void rtl8152_nic_reset(struct r8152 *tp) |
| { |
| int i; |
| |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST); |
| |
| for (i = 0; i < 1000; i++) { |
| if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST)) |
| break; |
| udelay(100); |
| } |
| } |
| |
| static inline u8 rtl8152_get_speed(struct r8152 *tp) |
| { |
| return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS); |
| } |
| |
| static int rtl8152_enable(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| u8 speed; |
| |
| speed = rtl8152_get_speed(tp); |
| if (speed & _100bps) { |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR); |
| ocp_data &= ~EEEP_CR_EEEP_TX; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data); |
| } else { |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR); |
| ocp_data |= EEEP_CR_EEEP_TX; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data); |
| } |
| |
| r8152b_reset_packet_filter(tp); |
| |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR); |
| ocp_data |= CR_RE | CR_TE; |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); |
| ocp_data &= ~RXDY_GATED_EN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); |
| |
| usb_fill_bulk_urb(tp->rx_urb, tp->udev, usb_rcvbulkpipe(tp->udev, 1), |
| tp->rx_skb->data, RTL8152_RMS + sizeof(struct rx_desc), |
| (usb_complete_t)read_bulk_callback, tp); |
| |
| return usb_submit_urb(tp->rx_urb, GFP_KERNEL); |
| } |
| |
| static void rtl8152_disable(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| int i; |
| |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); |
| ocp_data &= ~RCR_ACPT_ALL; |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); |
| |
| usb_kill_urb(tp->tx_urb); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); |
| ocp_data |= RXDY_GATED_EN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); |
| |
| for (i = 0; i < 1000; i++) { |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); |
| if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY) |
| break; |
| mdelay(1); |
| } |
| |
| for (i = 0; i < 1000; i++) { |
| if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY) |
| break; |
| mdelay(1); |
| } |
| |
| usb_kill_urb(tp->rx_urb); |
| |
| rtl8152_nic_reset(tp); |
| } |
| |
| static void r8152b_exit_oob(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| int i; |
| |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); |
| ocp_data &= ~RCR_ACPT_ALL; |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); |
| ocp_data |= RXDY_GATED_EN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); |
| |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00); |
| |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); |
| ocp_data &= ~NOW_IS_OOB; |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); |
| ocp_data &= ~MCU_BORW_EN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); |
| |
| for (i = 0; i < 1000; i++) { |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); |
| if (ocp_data & LINK_LIST_READY) |
| break; |
| mdelay(1); |
| } |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); |
| ocp_data |= RE_INIT_LL; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); |
| |
| for (i = 0; i < 1000; i++) { |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); |
| if (ocp_data & LINK_LIST_READY) |
| break; |
| mdelay(1); |
| } |
| |
| rtl8152_nic_reset(tp); |
| |
| /* rx share fifo credit full threshold */ |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_DEV_STAT); |
| ocp_data &= STAT_SPEED_MASK; |
| if (ocp_data == STAT_SPEED_FULL) { |
| /* rx share fifo credit near full threshold */ |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, |
| RXFIFO_THR2_FULL); |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, |
| RXFIFO_THR3_FULL); |
| } else { |
| /* rx share fifo credit near full threshold */ |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, |
| RXFIFO_THR2_HIGH); |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, |
| RXFIFO_THR3_HIGH); |
| } |
| |
| /* TX share fifo free credit full threshold */ |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL); |
| |
| ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD); |
| ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_BUF_THR); |
| ocp_write_dword(tp, MCU_TYPE_USB, USB_TX_DMA, |
| TEST_MODE_DISABLE | TX_SIZE_ADJUST1); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); |
| ocp_data &= ~CPCR_RX_VLAN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); |
| |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0); |
| ocp_data |= TCR0_AUTO_FIFO; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data); |
| } |
| |
| static void r8152b_enter_oob(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| int i; |
| |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); |
| ocp_data &= ~NOW_IS_OOB; |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); |
| |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB); |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB); |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB); |
| |
| rtl8152_disable(tp); |
| |
| for (i = 0; i < 1000; i++) { |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); |
| if (ocp_data & LINK_LIST_READY) |
| break; |
| mdelay(1); |
| } |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); |
| ocp_data |= RE_INIT_LL; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); |
| |
| for (i = 0; i < 1000; i++) { |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); |
| if (ocp_data & LINK_LIST_READY) |
| break; |
| mdelay(1); |
| } |
| |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL); |
| ocp_data |= MAGIC_EN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); |
| ocp_data |= CPCR_RX_VLAN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR); |
| ocp_data |= ALDPS_PROXY_MODE; |
| ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data); |
| |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); |
| ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB; |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); |
| |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); |
| ocp_data &= ~RXDY_GATED_EN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); |
| |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); |
| ocp_data |= RCR_APM | RCR_AM | RCR_AB; |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); |
| } |
| |
| static void r8152b_disable_aldps(struct r8152 *tp) |
| { |
| ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA | DIS_SDSAVE); |
| msleep(20); |
| } |
| |
| static inline void r8152b_enable_aldps(struct r8152 *tp) |
| { |
| ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS | |
| LINKENA | DIS_SDSAVE); |
| } |
| |
| static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) |
| { |
| u16 bmcr, anar; |
| int ret = 0; |
| |
| cancel_delayed_work_sync(&tp->schedule); |
| anar = r8152_mdio_read(tp, MII_ADVERTISE); |
| anar &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL | |
| ADVERTISE_100HALF | ADVERTISE_100FULL); |
| |
| if (autoneg == AUTONEG_DISABLE) { |
| if (speed == SPEED_10) { |
| bmcr = 0; |
| anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; |
| } else if (speed == SPEED_100) { |
| bmcr = BMCR_SPEED100; |
| anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; |
| } else { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (duplex == DUPLEX_FULL) |
| bmcr |= BMCR_FULLDPLX; |
| } else { |
| if (speed == SPEED_10) { |
| if (duplex == DUPLEX_FULL) |
| anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; |
| else |
| anar |= ADVERTISE_10HALF; |
| } else if (speed == SPEED_100) { |
| if (duplex == DUPLEX_FULL) { |
| anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; |
| anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; |
| } else { |
| anar |= ADVERTISE_10HALF; |
| anar |= ADVERTISE_100HALF; |
| } |
| } else { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| bmcr = BMCR_ANENABLE | BMCR_ANRESTART; |
| } |
| |
| r8152_mdio_write(tp, MII_ADVERTISE, anar); |
| r8152_mdio_write(tp, MII_BMCR, bmcr); |
| |
| out: |
| schedule_delayed_work(&tp->schedule, 5 * HZ); |
| |
| return ret; |
| } |
| |
| static void rtl8152_down(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL); |
| ocp_data &= ~POWER_CUT; |
| ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data); |
| |
| r8152b_disable_aldps(tp); |
| r8152b_enter_oob(tp); |
| r8152b_enable_aldps(tp); |
| } |
| |
| static void set_carrier(struct r8152 *tp) |
| { |
| struct net_device *netdev = tp->netdev; |
| u8 speed; |
| |
| speed = rtl8152_get_speed(tp); |
| |
| if (speed & LINK_STATUS) { |
| if (!(tp->speed & LINK_STATUS)) { |
| rtl8152_enable(tp); |
| set_bit(RTL8152_SET_RX_MODE, &tp->flags); |
| netif_carrier_on(netdev); |
| } |
| } else { |
| if (tp->speed & LINK_STATUS) { |
| netif_carrier_off(netdev); |
| rtl8152_disable(tp); |
| } |
| } |
| tp->speed = speed; |
| } |
| |
| static void rtl_work_func_t(struct work_struct *work) |
| { |
| struct r8152 *tp = container_of(work, struct r8152, schedule.work); |
| |
| if (!test_bit(WORK_ENABLE, &tp->flags)) |
| goto out1; |
| |
| if (test_bit(RTL8152_UNPLUG, &tp->flags)) |
| goto out1; |
| |
| set_carrier(tp); |
| |
| if (test_bit(RTL8152_SET_RX_MODE, &tp->flags)) |
| _rtl8152_set_rx_mode(tp->netdev); |
| |
| schedule_delayed_work(&tp->schedule, HZ); |
| |
| out1: |
| return; |
| } |
| |
| static int rtl8152_open(struct net_device *netdev) |
| { |
| struct r8152 *tp = netdev_priv(netdev); |
| int res = 0; |
| |
| tp->speed = rtl8152_get_speed(tp); |
| if (tp->speed & LINK_STATUS) { |
| res = rtl8152_enable(tp); |
| if (res) { |
| if (res == -ENODEV) |
| netif_device_detach(tp->netdev); |
| |
| netif_err(tp, ifup, netdev, |
| "rtl8152_open failed: %d\n", res); |
| return res; |
| } |
| |
| netif_carrier_on(netdev); |
| } else { |
| netif_stop_queue(netdev); |
| netif_carrier_off(netdev); |
| } |
| |
| rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL); |
| netif_start_queue(netdev); |
| set_bit(WORK_ENABLE, &tp->flags); |
| schedule_delayed_work(&tp->schedule, 0); |
| |
| return res; |
| } |
| |
| static int rtl8152_close(struct net_device *netdev) |
| { |
| struct r8152 *tp = netdev_priv(netdev); |
| int res = 0; |
| |
| clear_bit(WORK_ENABLE, &tp->flags); |
| cancel_delayed_work_sync(&tp->schedule); |
| netif_stop_queue(netdev); |
| rtl8152_disable(tp); |
| |
| return res; |
| } |
| |
| static void rtl_clear_bp(struct r8152 *tp) |
| { |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0); |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_2, 0); |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_4, 0); |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_6, 0); |
| ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_0, 0); |
| ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_2, 0); |
| ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_4, 0); |
| ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_6, 0); |
| mdelay(3); |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_BA, 0); |
| ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0); |
| } |
| |
| static void r8152b_enable_eee(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR); |
| ocp_data |= EEE_RX_EN | EEE_TX_EN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data); |
| ocp_reg_write(tp, OCP_EEE_CONFIG1, RG_TXLPI_MSK_HFDUP | RG_MATCLR_EN | |
| EEE_10_CAP | EEE_NWAY_EN | |
| TX_QUIET_EN | RX_QUIET_EN | |
| SDRISETIME | RG_RXLPI_MSK_HFDUP | |
| SDFALLTIME); |
| ocp_reg_write(tp, OCP_EEE_CONFIG2, RG_LPIHYS_NUM | RG_DACQUIET_EN | |
| RG_LDVQUIET_EN | RG_CKRSEL | |
| RG_EEEPRG_EN); |
| ocp_reg_write(tp, OCP_EEE_CONFIG3, FST_SNR_EYE_R | RG_LFS_SEL | MSK_PH); |
| ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | DEVICE_ADDR); |
| ocp_reg_write(tp, OCP_EEE_DATA, EEE_ADDR); |
| ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | DEVICE_ADDR); |
| ocp_reg_write(tp, OCP_EEE_DATA, EEE_DATA); |
| ocp_reg_write(tp, OCP_EEE_AR, 0x0000); |
| } |
| |
| static void r8152b_enable_fc(struct r8152 *tp) |
| { |
| u16 anar; |
| |
| anar = r8152_mdio_read(tp, MII_ADVERTISE); |
| anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; |
| r8152_mdio_write(tp, MII_ADVERTISE, anar); |
| } |
| |
| static void r8152b_hw_phy_cfg(struct r8152 *tp) |
| { |
| r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE); |
| r8152b_disable_aldps(tp); |
| } |
| |
| static void r8152b_init(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| int i; |
| |
| rtl_clear_bp(tp); |
| |
| if (tp->version == RTL_VER_01) { |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE); |
| ocp_data &= ~LED_MODE_MASK; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data); |
| } |
| |
| r8152b_hw_phy_cfg(tp); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL); |
| ocp_data &= ~POWER_CUT; |
| ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS); |
| ocp_data &= ~RWSUME_INDICATE; |
| ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data); |
| |
| r8152b_exit_oob(tp); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR); |
| ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL); |
| ocp_data &= ~MCU_CLK_RATIO_MASK; |
| ocp_data |= MCU_CLK_RATIO | D3_CLK_GATED_EN; |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ocp_data); |
| ocp_data = GPHY_STS_MSK | SPEED_DOWN_MSK | |
| SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data); |
| |
| r8152b_enable_eee(tp); |
| r8152b_enable_aldps(tp); |
| r8152b_enable_fc(tp); |
| |
| r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE | |
| BMCR_ANRESTART); |
| for (i = 0; i < 100; i++) { |
| udelay(100); |
| if (!(r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET)) |
| break; |
| } |
| |
| /* disable rx aggregation */ |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); |
| ocp_data |= RX_AGG_DISABLE; |
| ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); |
| } |
| |
| static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) |
| { |
| struct r8152 *tp = usb_get_intfdata(intf); |
| |
| netif_device_detach(tp->netdev); |
| |
| if (netif_running(tp->netdev)) { |
| clear_bit(WORK_ENABLE, &tp->flags); |
| cancel_delayed_work_sync(&tp->schedule); |
| } |
| |
| rtl8152_down(tp); |
| |
| return 0; |
| } |
| |
| static int rtl8152_resume(struct usb_interface *intf) |
| { |
| struct r8152 *tp = usb_get_intfdata(intf); |
| |
| r8152b_init(tp); |
| netif_device_attach(tp->netdev); |
| if (netif_running(tp->netdev)) { |
| rtl8152_enable(tp); |
| set_bit(WORK_ENABLE, &tp->flags); |
| set_bit(RTL8152_SET_RX_MODE, &tp->flags); |
| schedule_delayed_work(&tp->schedule, 0); |
| } |
| |
| return 0; |
| } |
| |
| static void rtl8152_get_drvinfo(struct net_device *netdev, |
| struct ethtool_drvinfo *info) |
| { |
| struct r8152 *tp = netdev_priv(netdev); |
| |
| strncpy(info->driver, MODULENAME, ETHTOOL_BUSINFO_LEN); |
| strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN); |
| usb_make_path(tp->udev, info->bus_info, sizeof(info->bus_info)); |
| } |
| |
| static |
| int rtl8152_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) |
| { |
| struct r8152 *tp = netdev_priv(netdev); |
| |
| if (!tp->mii.mdio_read) |
| return -EOPNOTSUPP; |
| |
| return mii_ethtool_gset(&tp->mii, cmd); |
| } |
| |
| static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct r8152 *tp = netdev_priv(dev); |
| |
| return rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex); |
| } |
| |
| static struct ethtool_ops ops = { |
| .get_drvinfo = rtl8152_get_drvinfo, |
| .get_settings = rtl8152_get_settings, |
| .set_settings = rtl8152_set_settings, |
| .get_link = ethtool_op_get_link, |
| }; |
| |
| static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) |
| { |
| struct r8152 *tp = netdev_priv(netdev); |
| struct mii_ioctl_data *data = if_mii(rq); |
| int res = 0; |
| |
| switch (cmd) { |
| case SIOCGMIIPHY: |
| data->phy_id = R8152_PHY_ID; /* Internal PHY */ |
| break; |
| |
| case SIOCGMIIREG: |
| data->val_out = r8152_mdio_read(tp, data->reg_num); |
| break; |
| |
| case SIOCSMIIREG: |
| if (!capable(CAP_NET_ADMIN)) { |
| res = -EPERM; |
| break; |
| } |
| r8152_mdio_write(tp, data->reg_num, data->val_in); |
| break; |
| |
| default: |
| res = -EOPNOTSUPP; |
| } |
| |
| return res; |
| } |
| |
| static const struct net_device_ops rtl8152_netdev_ops = { |
| .ndo_open = rtl8152_open, |
| .ndo_stop = rtl8152_close, |
| .ndo_do_ioctl = rtl8152_ioctl, |
| .ndo_start_xmit = rtl8152_start_xmit, |
| .ndo_tx_timeout = rtl8152_tx_timeout, |
| .ndo_set_rx_mode = rtl8152_set_rx_mode, |
| .ndo_set_mac_address = rtl8152_set_mac_address, |
| |
| .ndo_change_mtu = eth_change_mtu, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| static void r8152b_get_version(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| u16 version; |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1); |
| version = (u16)(ocp_data & VERSION_MASK); |
| |
| switch (version) { |
| case 0x4c00: |
| tp->version = RTL_VER_01; |
| break; |
| case 0x4c10: |
| tp->version = RTL_VER_02; |
| break; |
| default: |
| netif_info(tp, probe, tp->netdev, |
| "Unknown version 0x%04x\n", version); |
| break; |
| } |
| } |
| |
| static int rtl8152_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *udev = interface_to_usbdev(intf); |
| struct r8152 *tp; |
| struct net_device *netdev; |
| |
| if (udev->actconfig->desc.bConfigurationValue != 1) { |
| usb_driver_set_configuration(udev, 1); |
| return -ENODEV; |
| } |
| |
| netdev = alloc_etherdev(sizeof(struct r8152)); |
| if (!netdev) { |
| dev_err(&intf->dev, "Out of memory"); |
| return -ENOMEM; |
| } |
| |
| tp = netdev_priv(netdev); |
| tp->msg_enable = 0x7FFF; |
| |
| tasklet_init(&tp->tl, rx_fixup, (unsigned long)tp); |
| INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t); |
| |
| tp->udev = udev; |
| tp->netdev = netdev; |
| netdev->netdev_ops = &rtl8152_netdev_ops; |
| netdev->watchdog_timeo = RTL8152_TX_TIMEOUT; |
| netdev->features &= ~NETIF_F_IP_CSUM; |
| SET_ETHTOOL_OPS(netdev, &ops); |
| tp->speed = 0; |
| |
| tp->mii.dev = netdev; |
| tp->mii.mdio_read = read_mii_word; |
| tp->mii.mdio_write = write_mii_word; |
| tp->mii.phy_id_mask = 0x3f; |
| tp->mii.reg_num_mask = 0x1f; |
| tp->mii.phy_id = R8152_PHY_ID; |
| tp->mii.supports_gmii = 0; |
| |
| r8152b_get_version(tp); |
| r8152b_init(tp); |
| set_ethernet_addr(tp); |
| |
| if (!alloc_all_urbs(tp)) { |
| netif_err(tp, probe, netdev, "out of memory"); |
| goto out; |
| } |
| |
| tp->rx_skb = netdev_alloc_skb(netdev, |
| RTL8152_RMS + sizeof(struct rx_desc)); |
| if (!tp->rx_skb) |
| goto out1; |
| |
| usb_set_intfdata(intf, tp); |
| SET_NETDEV_DEV(netdev, &intf->dev); |
| |
| |
| if (register_netdev(netdev) != 0) { |
| netif_err(tp, probe, netdev, "couldn't register the device"); |
| goto out2; |
| } |
| |
| netif_info(tp, probe, netdev, "%s", DRIVER_VERSION); |
| |
| return 0; |
| |
| out2: |
| usb_set_intfdata(intf, NULL); |
| dev_kfree_skb(tp->rx_skb); |
| out1: |
| free_all_urbs(tp); |
| out: |
| free_netdev(netdev); |
| return -EIO; |
| } |
| |
| static void rtl8152_unload(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| |
| if (tp->version != RTL_VER_01) { |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL); |
| ocp_data |= POWER_CUT; |
| ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data); |
| } |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS); |
| ocp_data &= ~RWSUME_INDICATE; |
| ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data); |
| } |
| |
| static void rtl8152_disconnect(struct usb_interface *intf) |
| { |
| struct r8152 *tp = usb_get_intfdata(intf); |
| |
| usb_set_intfdata(intf, NULL); |
| if (tp) { |
| set_bit(RTL8152_UNPLUG, &tp->flags); |
| tasklet_kill(&tp->tl); |
| unregister_netdev(tp->netdev); |
| rtl8152_unload(tp); |
| free_all_urbs(tp); |
| if (tp->rx_skb) |
| dev_kfree_skb(tp->rx_skb); |
| free_netdev(tp->netdev); |
| } |
| } |
| |
| /* table of devices that work with this driver */ |
| static struct usb_device_id rtl8152_table[] = { |
| {USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, rtl8152_table); |
| |
| static struct usb_driver rtl8152_driver = { |
| .name = MODULENAME, |
| .probe = rtl8152_probe, |
| .disconnect = rtl8152_disconnect, |
| .id_table = rtl8152_table, |
| .suspend = rtl8152_suspend, |
| .resume = rtl8152_resume |
| }; |
| |
| module_usb_driver(rtl8152_driver); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |