| /* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) "OLEDB: %s: " fmt, __func__ |
| |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/notifier.h> |
| #include <linux/of.h> |
| #include <linux/regmap.h> |
| #include <linux/spmi.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/regulator/qpnp-labibb-regulator.h> |
| #include <linux/qpnp/qpnp-pbs.h> |
| #include <linux/qpnp/qpnp-revid.h> |
| |
| #define QPNP_OLEDB_REGULATOR_DRIVER_NAME "qcom,qpnp-oledb-regulator" |
| #define OLEDB_VOUT_STEP_MV 100 |
| #define OLEDB_VOUT_MIN_MV 5000 |
| #define OLEDB_VOUT_MAX_MV 8100 |
| #define OLEDB_VOUT_HW_DEFAULT 6400 |
| |
| #define OLEDB_MODULE_RDY 0x45 |
| #define OLEDB_MODULE_RDY_BIT BIT(7) |
| |
| #define OLEDB_MODULE_ENABLE 0x46 |
| #define OLEDB_MODULE_ENABLE_BIT BIT(7) |
| |
| #define OLEDB_EXT_PIN_CTL 0x47 |
| #define OLEDB_EXT_PIN_CTL_BIT BIT(7) |
| |
| #define OLEDB_SWIRE_CONTROL 0x48 |
| #define OLEDB_EN_SWIRE_VOUT_UPD_BIT BIT(6) |
| #define OLEDB_EN_SWIRE_PD_UPD_BIT BIT(7) |
| |
| #define OLEDB_VOUT_PGM 0x49 |
| #define OLEDB_VOUT_PGM_MASK GENMASK(4, 0) |
| |
| #define OLEDB_VOUT_DEFAULT 0x4A |
| #define OLEDB_VOUT_DEFAULT_MASK GENMASK(4, 0) |
| |
| #define OLEDB_PD_CTL 0x4B |
| |
| #define OLEDB_ILIM_NFET 0x4E |
| #define OLEDB_ILIMIT_NFET_MASK GENMASK(2, 0) |
| |
| #define OLEDB_BIAS_GEN_WARMUP_DELAY 0x52 |
| #define OLEDB_BIAS_GEN_WARMUP_DELAY_MASK GENMASK(1, 0) |
| |
| #define OLEDB_SHORT_PROTECT 0x59 |
| #define OLEDB_ENABLE_SC_DETECTION_BIT BIT(7) |
| #define OLEDB_DBNC_SHORT_DETECTION_MASK GENMASK(1, 0) |
| |
| #define OLEDB_FAST_PRECHARGE 0x5A |
| #define OLEDB_FAST_PRECHG_PPULSE_EN_BIT BIT(7) |
| #define OLEDB_DBNC_PRECHARGE_MASK GENMASK(5, 4) |
| #define OLEDB_DBNC_PRECHARGE_SHIFT 4 |
| #define OLEDB_PRECHARGE_PULSE_PERIOD_MASK GENMASK(3, 2) |
| #define OLEDB_PRECHARGE_PULSE_PERIOD_SHIFT 2 |
| #define OLEDB_PRECHARGE_PULSE_TON_MASK GENMASK(1, 0) |
| |
| #define OLEDB_EN_PSM 0x5B |
| #define OLEDB_PSM_ENABLE_BIT BIT(7) |
| |
| #define OLEDB_PSM_CTL 0x5C |
| #define OLEDB_PSM_HYSTERYSIS_CTL_BIT BIT(3) |
| #define OLEDB_PSM_HYSTERYSIS_CTL_BIT_SHIFT 3 |
| #define OLEDB_VREF_PSM_MASK GENMASK(2, 0) |
| |
| #define OLEDB_PFM_CTL 0x5D |
| #define OLEDB_PFM_ENABLE_BIT BIT(7) |
| #define OLEDB_PFM_HYSTERYSIS_CTRL_BIT_MASK BIT(4) |
| #define OLEDB_PFM_HYSTERYSIS_CTL_BIT_SHIFT 4 |
| #define OLEDB_PFM_CURR_LIMIT_MASK GENMASK(3, 2) |
| #define OLEDB_PFM_CURR_LIMIT_SHIFT 2 |
| #define OLEDB_PFM_OFF_TIME_NS_MASK GENMASK(1, 0) |
| |
| #define OLEDB_NLIMIT 0x64 |
| #define OLEDB_ENABLE_NLIMIT_BIT BIT(7) |
| #define OLEDB_ENABLE_NLIMIT_BIT_SHIFT 7 |
| #define OLEDB_NLIMIT_PGM_MASK GENMASK(1, 0) |
| |
| #define OLEDB_SPARE_CTL 0xE9 |
| #define OLEDB_FORCE_PD_CTL_SPARE_BIT BIT(7) |
| |
| #define OLEDB_PD_PBS_TRIGGER_BIT BIT(0) |
| |
| #define OLEDB_SEC_UNLOCK_CODE 0xA5 |
| #define OLEDB_PSM_HYS_CTRL_MIN 13 |
| #define OLEDB_PSM_HYS_CTRL_MAX 26 |
| |
| #define OLEDB_PFM_HYS_CTRL_MIN 13 |
| #define OLEDB_PFM_HYS_CTRL_MAX 26 |
| |
| #define OLEDB_PFM_OFF_TIME_MIN 110 |
| #define OLEDB_PFM_OFF_TIME_MAX 480 |
| |
| #define OLEDB_PRECHG_TIME_MIN 1 |
| #define OLEDB_PRECHG_TIME_MAX 8 |
| |
| #define OLEDB_PRECHG_PULSE_PERIOD_MIN 3 |
| #define OLEDB_PRECHG_PULSE_PERIOD_MAX 12 |
| |
| #define OLEDB_MIN_SC_DBNC_TIME_FSW 2 |
| #define OLEDB_MAX_SC_DBNC_TIME_FSW 16 |
| |
| #define OLEDB_PRECHG_PULSE_ON_TIME_MIN 1200 |
| #define OLEDB_PRECHG_PULSE_ON_TIME_MAX 3000 |
| |
| #define PSM_HYSTERYSIS_MV_TO_VAL(val_mv) ((val_mv/13) - 1) |
| #define PFM_HYSTERYSIS_MV_TO_VAL(val_mv) ((val_mv/13) - 1) |
| #define PFM_OFF_TIME_NS_TO_VAL(val_ns) ((val_ns/110) - 1) |
| #define PRECHG_DEBOUNCE_TIME_MS_TO_VAL(val_ms) ((val_ms/2) - \ |
| (val_ms/8)) |
| #define PRECHG_PULSE_PERIOD_US_TO_VAL(val_us) ((val_us/3) - 1) |
| #define PRECHG_PULSE_ON_TIME_NS_TO_VAL(val_ns) (val_ns/600 - 2) |
| #define SHORT_CIRCUIT_DEBOUNCE_TIME_TO_VAL(val) ((val/4) - (val/16)) |
| |
| struct qpnp_oledb_psm_ctl { |
| int psm_enable; |
| int psm_hys_ctl; |
| int psm_vref; |
| }; |
| |
| struct qpnp_oledb_pfm_ctl { |
| int pfm_enable; |
| int pfm_hys_ctl; |
| int pfm_curr_limit; |
| int pfm_off_time; |
| }; |
| |
| struct qpnp_oledb_fast_precharge_ctl { |
| int fast_prechg_ppulse_en; |
| int prechg_debounce_time; |
| int prechg_pulse_period; |
| int prechg_pulse_on_time; |
| }; |
| |
| struct qpnp_oledb { |
| struct platform_device *pdev; |
| struct device *dev; |
| struct regmap *regmap; |
| struct class oledb_class; |
| struct regulator_desc rdesc; |
| struct regulator_dev *rdev; |
| struct qpnp_oledb_psm_ctl psm_ctl; |
| struct qpnp_oledb_pfm_ctl pfm_ctl; |
| struct qpnp_oledb_fast_precharge_ctl fast_prechg_ctl; |
| struct notifier_block oledb_nb; |
| struct mutex bus_lock; |
| struct device_node *pbs_dev_node; |
| struct pmic_revid_data *pmic_rev_id; |
| |
| u32 base; |
| u8 mod_enable; |
| u8 ext_pinctl_state; |
| int current_voltage; |
| int default_voltage; |
| int vout_mv; |
| int warmup_delay; |
| int peak_curr_limit; |
| int pd_ctl; |
| int negative_curr_limit; |
| int nlimit_enable; |
| int sc_en; |
| int sc_dbnc_time; |
| bool swire_control; |
| bool ext_pin_control; |
| bool dynamic_ext_pinctl_config; |
| bool pbs_control; |
| bool force_pd_control; |
| bool handle_lab_sc_notification; |
| bool lab_sc_detected; |
| bool secure_mode; |
| }; |
| |
| static const u16 oledb_warmup_dly_ns[] = {6700, 13300, 26700, 53400}; |
| static const u16 oledb_peak_curr_limit_ma[] = {115, 265, 415, 570, |
| 720, 870, 1020, 1170}; |
| static const u16 oledb_psm_vref_mv[] = {440, 510, 580, 650, 715, |
| 780, 850, 920}; |
| static const u16 oledb_pfm_curr_limit_ma[] = {130, 200, 270, 340}; |
| static const u16 oledb_nlimit_ma[] = {170, 300, 420, 550}; |
| |
| static int qpnp_oledb_read(struct qpnp_oledb *oledb, u32 address, |
| u8 *val, int count) |
| { |
| int rc = 0; |
| struct platform_device *pdev = oledb->pdev; |
| |
| mutex_lock(&oledb->bus_lock); |
| rc = regmap_bulk_read(oledb->regmap, address, val, count); |
| if (rc) |
| pr_err("Failed to read address=0x%02x sid=0x%02x rc=%d\n", |
| address, to_spmi_device(pdev->dev.parent)->usid, rc); |
| |
| mutex_unlock(&oledb->bus_lock); |
| return rc; |
| } |
| |
| static int qpnp_oledb_masked_write(struct qpnp_oledb *oledb, |
| u32 address, u8 mask, u8 val) |
| { |
| int rc; |
| |
| mutex_lock(&oledb->bus_lock); |
| rc = regmap_update_bits(oledb->regmap, address, mask, val); |
| if (rc < 0) |
| pr_err("Failed to write address 0x%04X, rc = %d\n", |
| address, rc); |
| else |
| pr_debug("Wrote 0x%02X to addr 0x%04X\n", |
| val, address); |
| |
| mutex_unlock(&oledb->bus_lock); |
| return rc; |
| } |
| |
| #define OLEDB_SEC_ACCESS 0xD0 |
| static int qpnp_oledb_sec_masked_write(struct qpnp_oledb *oledb, u16 address, |
| u8 mask, u8 val) |
| { |
| int rc = 0; |
| u8 sec_val = OLEDB_SEC_UNLOCK_CODE; |
| u16 sec_reg_addr = (address & 0xFF00) | OLEDB_SEC_ACCESS; |
| |
| mutex_lock(&oledb->bus_lock); |
| rc = regmap_write(oledb->regmap, sec_reg_addr, sec_val); |
| if (rc < 0) { |
| pr_err("register %x failed rc = %d\n", sec_reg_addr, rc); |
| goto error; |
| } |
| |
| rc = regmap_update_bits(oledb->regmap, address, mask, val); |
| if (rc < 0) |
| pr_err("spmi write failed: addr=%03X, rc=%d\n", address, rc); |
| |
| error: |
| mutex_unlock(&oledb->bus_lock); |
| return rc; |
| } |
| |
| static int qpnp_oledb_write(struct qpnp_oledb *oledb, u16 address, u8 *val, |
| int count) |
| { |
| int rc = 0; |
| struct platform_device *pdev = oledb->pdev; |
| |
| mutex_lock(&oledb->bus_lock); |
| rc = regmap_bulk_write(oledb->regmap, address, val, count); |
| if (rc) |
| pr_err("Failed to write address=0x%02x sid=0x%02x rc=%d\n", |
| address, to_spmi_device(pdev->dev.parent)->usid, rc); |
| else |
| pr_debug("Wrote 0x%02X to addr 0x%04X\n", |
| *val, address); |
| |
| mutex_unlock(&oledb->bus_lock); |
| return rc; |
| } |
| |
| static int qpnp_oledb_regulator_enable(struct regulator_dev *rdev) |
| { |
| int rc = 0; |
| u8 val = 0; |
| |
| struct qpnp_oledb *oledb = rdev_get_drvdata(rdev); |
| |
| if (oledb->secure_mode) |
| return 0; |
| |
| if (oledb->lab_sc_detected == true) { |
| pr_info("Short circuit detected: Disabled OLEDB rail\n"); |
| return 0; |
| } |
| |
| if (oledb->ext_pin_control) { |
| rc = qpnp_oledb_read(oledb, oledb->base + OLEDB_EXT_PIN_CTL, |
| &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to read EXT_PIN_CTL rc=%d\n", rc); |
| return rc; |
| } |
| |
| /* |
| * Enable ext-pin-ctl after display-supply is turned on. |
| * This is to avoid glitches on the external pin. |
| */ |
| if (!(val & OLEDB_EXT_PIN_CTL_BIT) && |
| oledb->dynamic_ext_pinctl_config) { |
| val = OLEDB_EXT_PIN_CTL_BIT; |
| rc = qpnp_oledb_write(oledb, oledb->base + |
| OLEDB_EXT_PIN_CTL, &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to write EXT_PIN_CTL rc=%d\n", |
| rc); |
| return rc; |
| } |
| } |
| pr_debug("ext-pin-ctrl mode enabled\n"); |
| } else { |
| val = OLEDB_MODULE_ENABLE_BIT; |
| rc = qpnp_oledb_write(oledb, oledb->base + OLEDB_MODULE_ENABLE, |
| &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to write MODULE_ENABLE rc=%d\n", rc); |
| return rc; |
| } |
| |
| ndelay(oledb->warmup_delay); |
| pr_debug("register-control mode, module enabled\n"); |
| } |
| |
| oledb->mod_enable = true; |
| if (oledb->pbs_control) { |
| rc = qpnp_oledb_masked_write(oledb, oledb->base + |
| OLEDB_SWIRE_CONTROL, OLEDB_EN_SWIRE_PD_UPD_BIT | |
| OLEDB_EN_SWIRE_VOUT_UPD_BIT, 0); |
| if (rc < 0) |
| pr_err("Failed to write SWIRE_CTL for pbs mode rc=%d\n", |
| rc); |
| } |
| |
| return rc; |
| } |
| |
| static int qpnp_oledb_regulator_disable(struct regulator_dev *rdev) |
| { |
| int rc = 0; |
| u8 trigger_bitmap = OLEDB_PD_PBS_TRIGGER_BIT; |
| u8 val; |
| |
| struct qpnp_oledb *oledb = rdev_get_drvdata(rdev); |
| |
| if (oledb->secure_mode) |
| return 0; |
| /* |
| * Disable ext-pin-ctl after display-supply is turned off. This is to |
| * avoid glitches on the external pin. |
| */ |
| if (oledb->ext_pin_control) { |
| if (oledb->dynamic_ext_pinctl_config) { |
| rc = qpnp_oledb_masked_write(oledb, oledb->base + |
| OLEDB_EXT_PIN_CTL, OLEDB_EXT_PIN_CTL_BIT, 0); |
| if (rc < 0) { |
| pr_err("Failed to write EXT_PIN_CTL rc=%d\n", |
| rc); |
| return rc; |
| } |
| } |
| pr_debug("ext-pin-ctrl mode disabled\n"); |
| } else { |
| rc = qpnp_oledb_masked_write(oledb, oledb->base + |
| OLEDB_MODULE_ENABLE, |
| OLEDB_MODULE_ENABLE_BIT, 0); |
| if (rc < 0) { |
| pr_err("Failed to write MODULE_ENABLE rc=%d\n", rc); |
| return rc; |
| } |
| pr_debug("Register-control mode, module disabled\n"); |
| } |
| |
| if (oledb->force_pd_control) { |
| rc = qpnp_oledb_read(oledb, oledb->base + OLEDB_SPARE_CTL, |
| &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to read OLEDB_SPARE_CTL rc=%d\n", rc); |
| return rc; |
| } |
| |
| if (val & OLEDB_FORCE_PD_CTL_SPARE_BIT) { |
| rc = qpnp_oledb_sec_masked_write(oledb, oledb->base + |
| OLEDB_SPARE_CTL, |
| OLEDB_FORCE_PD_CTL_SPARE_BIT, 0); |
| if (rc < 0) { |
| pr_err("Failed to write SPARE_CTL rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_pbs_trigger_event(oledb->pbs_dev_node, |
| trigger_bitmap); |
| if (rc < 0) |
| pr_err("Failed to trigger the PBS sequence\n"); |
| |
| pr_debug("PBS event triggered\n"); |
| } else { |
| pr_debug("OLEDB_SPARE_CTL register bit not set\n"); |
| } |
| } |
| |
| oledb->mod_enable = false; |
| |
| return rc; |
| } |
| |
| static int qpnp_oledb_regulator_is_enabled(struct regulator_dev *rdev) |
| { |
| struct qpnp_oledb *oledb = rdev_get_drvdata(rdev); |
| |
| return oledb->mod_enable; |
| } |
| |
| static int qpnp_oledb_regulator_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV, unsigned int *selector) |
| { |
| u8 val; |
| int rc = 0; |
| |
| struct qpnp_oledb *oledb = rdev_get_drvdata(rdev); |
| |
| if (oledb->swire_control || oledb->secure_mode) |
| return 0; |
| |
| val = DIV_ROUND_UP(min_uV - OLEDB_VOUT_MIN_MV, OLEDB_VOUT_STEP_MV); |
| |
| rc = qpnp_oledb_write(oledb, oledb->base + OLEDB_VOUT_PGM, |
| &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to write VOUT_PGM rc=%d\n", rc); |
| return rc; |
| } |
| |
| oledb->current_voltage = min_uV; |
| pr_debug("register-control mode, current voltage %d\n", |
| oledb->current_voltage); |
| |
| return 0; |
| } |
| |
| static int qpnp_oledb_regulator_get_voltage(struct regulator_dev *rdev) |
| { |
| struct qpnp_oledb *oledb = rdev_get_drvdata(rdev); |
| |
| if (oledb->swire_control) |
| return 0; |
| |
| return oledb->current_voltage; |
| } |
| |
| static struct regulator_ops qpnp_oledb_ops = { |
| .enable = qpnp_oledb_regulator_enable, |
| .disable = qpnp_oledb_regulator_disable, |
| .is_enabled = qpnp_oledb_regulator_is_enabled, |
| .set_voltage = qpnp_oledb_regulator_set_voltage, |
| .get_voltage = qpnp_oledb_regulator_get_voltage, |
| }; |
| |
| static int qpnp_oledb_register_regulator(struct qpnp_oledb *oledb) |
| { |
| int rc = 0; |
| struct platform_device *pdev = oledb->pdev; |
| struct regulator_init_data *init_data; |
| struct regulator_desc *rdesc = &oledb->rdesc; |
| struct regulator_config cfg = {}; |
| |
| init_data = of_get_regulator_init_data(&pdev->dev, |
| pdev->dev.of_node, rdesc); |
| if (!init_data) { |
| pr_err("Unable to get OLEDB regulator init data\n"); |
| return -ENOMEM; |
| } |
| |
| if (init_data->constraints.name) { |
| rdesc->owner = THIS_MODULE; |
| rdesc->type = REGULATOR_VOLTAGE; |
| rdesc->ops = &qpnp_oledb_ops; |
| rdesc->name = init_data->constraints.name; |
| |
| cfg.dev = &pdev->dev; |
| cfg.init_data = init_data; |
| cfg.driver_data = oledb; |
| cfg.of_node = pdev->dev.of_node; |
| |
| if (of_get_property(pdev->dev.of_node, "parent-supply", |
| NULL)) |
| init_data->supply_regulator = "parent"; |
| |
| init_data->constraints.valid_ops_mask |
| |= REGULATOR_CHANGE_VOLTAGE | |
| REGULATOR_CHANGE_STATUS; |
| |
| oledb->rdev = devm_regulator_register(oledb->dev, rdesc, &cfg); |
| if (IS_ERR(oledb->rdev)) { |
| rc = PTR_ERR(oledb->rdev); |
| oledb->rdev = NULL; |
| pr_err("Unable to register OLEDB regulator, rc = %d\n", |
| rc); |
| return rc; |
| } |
| } else { |
| pr_err("OLEDB regulator name missing\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int qpnp_oledb_get_curr_voltage(struct qpnp_oledb *oledb, |
| u16 *current_voltage) |
| { |
| int rc = 0; |
| u8 val; |
| |
| if (!(oledb->mod_enable || oledb->ext_pinctl_state)) { |
| rc = qpnp_oledb_read(oledb, oledb->base + OLEDB_VOUT_DEFAULT, |
| &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to read VOUT_DEFAULT rc=%d\n", rc); |
| return rc; |
| } |
| } else { |
| rc = qpnp_oledb_read(oledb, oledb->base + |
| OLEDB_VOUT_PGM, &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to read VOUT_PGM rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| *current_voltage = (val * OLEDB_VOUT_STEP_MV) + OLEDB_VOUT_MIN_MV; |
| |
| return rc; |
| } |
| |
| static int qpnp_oledb_init_nlimit(struct qpnp_oledb *oledb) |
| { |
| int rc = 0, i = 0; |
| u32 val, mask = 0; |
| |
| if (oledb->nlimit_enable != -EINVAL) { |
| val = oledb->nlimit_enable << |
| OLEDB_ENABLE_NLIMIT_BIT_SHIFT; |
| mask = OLEDB_ENABLE_NLIMIT_BIT; |
| if (oledb->negative_curr_limit != -EINVAL) { |
| for (i = 0; i < ARRAY_SIZE(oledb_nlimit_ma); i++) { |
| if (oledb->negative_curr_limit == |
| oledb_nlimit_ma[i]) |
| break; |
| } |
| val |= i; |
| mask |= OLEDB_NLIMIT_PGM_MASK; |
| } |
| rc = qpnp_oledb_masked_write(oledb, oledb->base + |
| OLEDB_NLIMIT, mask, val); |
| if (rc < 0) |
| pr_err("Failed to write NLIMT rc=%d\n", rc); |
| } |
| |
| return rc; |
| } |
| |
| static int qpnp_oledb_init_psm(struct qpnp_oledb *oledb) |
| { |
| int rc = 0, i = 0; |
| u32 val = 0, mask = 0, temp = 0; |
| struct qpnp_oledb_psm_ctl *psm_ctl = &oledb->psm_ctl; |
| |
| if (psm_ctl->psm_enable == -EINVAL) |
| return rc; |
| |
| if (psm_ctl->psm_enable) { |
| val = OLEDB_PSM_ENABLE_BIT; |
| rc = qpnp_oledb_masked_write(oledb, oledb->base + |
| OLEDB_EN_PSM, OLEDB_PSM_ENABLE_BIT, val); |
| if (rc < 0) { |
| pr_err("Failed to write PSM_EN rc=%d\n", rc); |
| return rc; |
| } |
| |
| val = 0; |
| if (psm_ctl->psm_vref != -EINVAL) { |
| for (i = 0; i < ARRAY_SIZE(oledb_psm_vref_mv); i++) { |
| if (psm_ctl->psm_vref == |
| oledb_psm_vref_mv[i]) |
| break; |
| } |
| val = i; |
| mask = OLEDB_VREF_PSM_MASK; |
| } |
| |
| if (psm_ctl->psm_hys_ctl != -EINVAL) { |
| temp = PSM_HYSTERYSIS_MV_TO_VAL(psm_ctl->psm_hys_ctl); |
| val |= (temp << OLEDB_PSM_HYSTERYSIS_CTL_BIT_SHIFT); |
| mask |= OLEDB_PSM_HYSTERYSIS_CTL_BIT; |
| } |
| if (val) { |
| rc = qpnp_oledb_masked_write(oledb, oledb->base + |
| OLEDB_PSM_CTL, mask, val); |
| if (rc < 0) |
| pr_err("Failed to write PSM_CTL rc=%d\n", rc); |
| } |
| } else { |
| rc = qpnp_oledb_masked_write(oledb, oledb->base + |
| OLEDB_EN_PSM, OLEDB_PSM_ENABLE_BIT, 0); |
| if (rc < 0) |
| pr_err("Failed to write PSM_CTL rc=%d\n", rc); |
| } |
| |
| return rc; |
| } |
| |
| static int qpnp_oledb_init_pfm(struct qpnp_oledb *oledb) |
| { |
| int rc = 0, i = 0; |
| u32 val = 0, temp = 0, mask = 0; |
| struct qpnp_oledb_pfm_ctl *pfm_ctl = &oledb->pfm_ctl; |
| |
| if (pfm_ctl->pfm_enable == -EINVAL) |
| return rc; |
| |
| if (pfm_ctl->pfm_enable) { |
| mask = val = OLEDB_PFM_ENABLE_BIT; |
| if (pfm_ctl->pfm_hys_ctl != -EINVAL) { |
| temp = PFM_HYSTERYSIS_MV_TO_VAL(pfm_ctl->pfm_hys_ctl); |
| val |= temp << |
| OLEDB_PFM_HYSTERYSIS_CTL_BIT_SHIFT; |
| mask |= OLEDB_PFM_HYSTERYSIS_CTRL_BIT_MASK; |
| } |
| |
| if (pfm_ctl->pfm_curr_limit != -EINVAL) { |
| for (i = 0; i < ARRAY_SIZE(oledb_pfm_curr_limit_ma); |
| i++) { |
| if (pfm_ctl->pfm_curr_limit == |
| oledb_pfm_curr_limit_ma[i]) |
| break; |
| } |
| val |= (i << OLEDB_PFM_CURR_LIMIT_SHIFT); |
| mask |= OLEDB_PFM_CURR_LIMIT_MASK; |
| } |
| |
| if (pfm_ctl->pfm_off_time != -EINVAL) { |
| val |= PFM_OFF_TIME_NS_TO_VAL(pfm_ctl->pfm_off_time); |
| mask |= OLEDB_PFM_OFF_TIME_NS_MASK; |
| } |
| |
| rc = qpnp_oledb_masked_write(oledb, oledb->base + |
| OLEDB_PFM_CTL, mask, val); |
| if (rc < 0) |
| pr_err("Failed to write PFM_CTL rc=%d\n", rc); |
| } else { |
| rc = qpnp_oledb_masked_write(oledb, oledb->base + |
| OLEDB_PFM_CTL, OLEDB_PFM_ENABLE_BIT, 0); |
| if (rc < 0) |
| pr_err("Failed to write PFM_CTL rc=%d\n", rc); |
| } |
| |
| return rc; |
| } |
| |
| static int qpnp_oledb_init_fast_precharge(struct qpnp_oledb *oledb) |
| { |
| int rc = 0; |
| u32 val = 0, temp = 0, mask = 0; |
| struct qpnp_oledb_fast_precharge_ctl *prechg_ctl = |
| &oledb->fast_prechg_ctl; |
| |
| if (prechg_ctl->fast_prechg_ppulse_en == -EINVAL) |
| return rc; |
| |
| if (prechg_ctl->fast_prechg_ppulse_en) { |
| mask = val = OLEDB_FAST_PRECHG_PPULSE_EN_BIT; |
| if (prechg_ctl->prechg_debounce_time != -EINVAL) { |
| temp = PRECHG_DEBOUNCE_TIME_MS_TO_VAL( |
| prechg_ctl->prechg_debounce_time); |
| val |= temp << OLEDB_DBNC_PRECHARGE_SHIFT; |
| mask |= OLEDB_DBNC_PRECHARGE_MASK; |
| } |
| |
| if (prechg_ctl->prechg_pulse_period != -EINVAL) { |
| temp = PRECHG_PULSE_PERIOD_US_TO_VAL( |
| prechg_ctl->prechg_pulse_period); |
| val |= temp << OLEDB_PRECHARGE_PULSE_PERIOD_SHIFT; |
| mask |= OLEDB_PRECHARGE_PULSE_PERIOD_MASK; |
| } |
| |
| if (prechg_ctl->prechg_pulse_on_time != -EINVAL) { |
| val |= PRECHG_PULSE_ON_TIME_NS_TO_VAL( |
| prechg_ctl->prechg_pulse_on_time); |
| mask |= OLEDB_PRECHARGE_PULSE_TON_MASK; |
| } |
| |
| rc = qpnp_oledb_masked_write(oledb, oledb->base + |
| OLEDB_FAST_PRECHARGE, mask, val); |
| if (rc < 0) |
| pr_err("Failed to write FAST_PRECHARGE rc=%d\n", rc); |
| } else { |
| rc = qpnp_oledb_masked_write(oledb, oledb->base + |
| OLEDB_FAST_PRECHARGE, |
| OLEDB_FAST_PRECHG_PPULSE_EN_BIT, 0); |
| if (rc < 0) |
| pr_err("Failed to write FAST_PRECHARGE rc=%d\n", rc); |
| } |
| |
| return rc; |
| } |
| |
| static int qpnp_oledb_hw_init(struct qpnp_oledb *oledb) |
| { |
| int rc, i = 0; |
| u8 val = 0, mask = 0; |
| u16 current_voltage; |
| |
| if (oledb->default_voltage != -EINVAL) { |
| val = (oledb->default_voltage - OLEDB_VOUT_MIN_MV) / |
| OLEDB_VOUT_STEP_MV; |
| rc = qpnp_oledb_write(oledb, oledb->base + |
| OLEDB_VOUT_DEFAULT, &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to write VOUT_DEFAULT rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| rc = qpnp_oledb_read(oledb, oledb->base + OLEDB_MODULE_ENABLE, |
| &oledb->mod_enable, 1); |
| if (rc < 0) { |
| pr_err("Failed to read MODULE_ENABLE rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_oledb_read(oledb, oledb->base + OLEDB_EXT_PIN_CTL, |
| &oledb->ext_pinctl_state, 1); |
| if (rc < 0) { |
| pr_err("Failed to read EXT_PIN_CTL rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_oledb_get_curr_voltage(oledb, ¤t_voltage); |
| if (rc < 0) |
| return rc; |
| |
| /* |
| * Go through if the module is not enabled either through |
| * external pin control or SPMI interface. |
| */ |
| if (!((oledb->ext_pinctl_state & OLEDB_EXT_PIN_CTL_BIT) |
| || oledb->mod_enable)) { |
| if (oledb->warmup_delay != -EINVAL) { |
| for (i = 0; i < ARRAY_SIZE(oledb_warmup_dly_ns); i++) { |
| if (oledb->warmup_delay == |
| oledb_warmup_dly_ns[i]) |
| break; |
| } |
| val = i; |
| rc = qpnp_oledb_masked_write(oledb, |
| oledb->base + OLEDB_BIAS_GEN_WARMUP_DELAY, |
| OLEDB_BIAS_GEN_WARMUP_DELAY_MASK, val); |
| if (rc < 0) { |
| pr_err("Failed to write WARMUP_DELAY rc=%d\n", |
| rc); |
| return rc; |
| } |
| } else { |
| rc = qpnp_oledb_read(oledb, oledb->base + |
| OLEDB_BIAS_GEN_WARMUP_DELAY, |
| &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to read WARMUP_DELAY rc=%d\n", |
| rc); |
| return rc; |
| } |
| oledb->warmup_delay = oledb_warmup_dly_ns[val]; |
| } |
| |
| if (oledb->peak_curr_limit != -EINVAL) { |
| for (i = 0; i < ARRAY_SIZE(oledb_peak_curr_limit_ma); |
| i++) { |
| if (oledb->peak_curr_limit == |
| oledb_peak_curr_limit_ma[i]) |
| break; |
| } |
| val = i; |
| rc = qpnp_oledb_write(oledb, |
| oledb->base + OLEDB_ILIM_NFET, |
| &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to write ILIM_NEFT rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| if (oledb->pd_ctl != -EINVAL) { |
| val = oledb->pd_ctl; |
| rc = qpnp_oledb_write(oledb, oledb->base + |
| OLEDB_PD_CTL, &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to write PD_CTL rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| if (oledb->sc_en != -EINVAL) { |
| val = oledb->sc_en ? OLEDB_ENABLE_SC_DETECTION_BIT : 0; |
| mask = OLEDB_ENABLE_SC_DETECTION_BIT; |
| if (oledb->sc_dbnc_time != -EINVAL) { |
| val |= SHORT_CIRCUIT_DEBOUNCE_TIME_TO_VAL( |
| oledb->sc_dbnc_time); |
| mask |= OLEDB_DBNC_PRECHARGE_MASK; |
| } |
| |
| rc = qpnp_oledb_write(oledb, oledb->base + |
| OLEDB_SHORT_PROTECT, &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to write SHORT_PROTECT rc=%d\n", |
| rc); |
| return rc; |
| } |
| } |
| |
| rc = qpnp_oledb_init_nlimit(oledb); |
| if (rc < 0) |
| return rc; |
| |
| rc = qpnp_oledb_init_psm(oledb); |
| if (rc < 0) |
| return rc; |
| |
| rc = qpnp_oledb_init_pfm(oledb); |
| if (rc < 0) |
| return rc; |
| |
| rc = qpnp_oledb_init_fast_precharge(oledb); |
| if (rc < 0) |
| return rc; |
| |
| if (oledb->swire_control) { |
| val = OLEDB_EN_SWIRE_PD_UPD_BIT | |
| OLEDB_EN_SWIRE_VOUT_UPD_BIT; |
| rc = qpnp_oledb_masked_write(oledb, oledb->base + |
| OLEDB_SWIRE_CONTROL, OLEDB_EN_SWIRE_PD_UPD_BIT | |
| OLEDB_EN_SWIRE_VOUT_UPD_BIT, val); |
| if (rc < 0) |
| return rc; |
| } |
| |
| rc = qpnp_oledb_read(oledb, oledb->base + OLEDB_MODULE_RDY, |
| &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to read MODULE_RDY rc=%d\n", rc); |
| return rc; |
| } |
| |
| if (!(val & OLEDB_MODULE_RDY_BIT)) { |
| val = OLEDB_MODULE_RDY_BIT; |
| rc = qpnp_oledb_write(oledb, oledb->base + |
| OLEDB_MODULE_RDY, &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to write MODULE_RDY rc=%d\n", |
| rc); |
| return rc; |
| } |
| } |
| |
| if (!oledb->dynamic_ext_pinctl_config) { |
| if (oledb->ext_pin_control) { |
| val = OLEDB_EXT_PIN_CTL_BIT; |
| rc = qpnp_oledb_write(oledb, oledb->base + |
| OLEDB_EXT_PIN_CTL, &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to write EXT_PIN_CTL rc=%d\n", |
| rc); |
| return rc; |
| } |
| } else { |
| val = OLEDB_MODULE_ENABLE_BIT; |
| rc = qpnp_oledb_write(oledb, oledb->base + |
| OLEDB_MODULE_ENABLE, &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to write MODULE_ENABLE rc=%d\n", |
| rc); |
| return rc; |
| } |
| |
| ndelay(oledb->warmup_delay); |
| } |
| |
| oledb->mod_enable = true; |
| if (oledb->pbs_control) { |
| rc = qpnp_oledb_masked_write(oledb, |
| oledb->base + OLEDB_SWIRE_CONTROL, |
| OLEDB_EN_SWIRE_PD_UPD_BIT | |
| OLEDB_EN_SWIRE_VOUT_UPD_BIT, 0); |
| if (rc < 0) { |
| pr_err("Failed to write SWIRE_CTL rc=%d\n", |
| rc); |
| return rc; |
| } |
| } |
| } |
| |
| oledb->current_voltage = current_voltage; |
| } else { |
| /* module is enabled */ |
| if (oledb->current_voltage == -EINVAL) { |
| oledb->current_voltage = current_voltage; |
| } else if (!oledb->swire_control) { |
| if (oledb->current_voltage < OLEDB_VOUT_MIN_MV) { |
| pr_err("current_voltage %d is less than min_volt %d\n", |
| oledb->current_voltage, OLEDB_VOUT_MIN_MV); |
| return -EINVAL; |
| } |
| val = DIV_ROUND_UP(oledb->current_voltage - |
| OLEDB_VOUT_MIN_MV, OLEDB_VOUT_STEP_MV); |
| rc = qpnp_oledb_write(oledb, oledb->base + |
| OLEDB_VOUT_PGM, &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to write VOUT_PGM rc=%d\n", |
| rc); |
| return rc; |
| } |
| } |
| |
| oledb->mod_enable = true; |
| } |
| |
| return rc; |
| } |
| |
| static int qpnp_oledb_parse_nlimit(struct qpnp_oledb *oledb) |
| { |
| int rc = 0; |
| struct device_node *of_node = oledb->dev->of_node; |
| |
| oledb->nlimit_enable = -EINVAL; |
| rc = of_property_read_u32(of_node, "qcom,negative-curr-limit-enable", |
| &oledb->nlimit_enable); |
| if (!rc) { |
| oledb->negative_curr_limit = -EINVAL; |
| rc = of_property_read_u32(of_node, |
| "qcom,negative-curr-limit-ma", |
| &oledb->negative_curr_limit); |
| if (!rc) { |
| u16 min_curr_limit = oledb_nlimit_ma[0]; |
| u16 max_curr_limit = oledb_nlimit_ma[ARRAY_SIZE( |
| oledb_nlimit_ma) - 1]; |
| if (oledb->negative_curr_limit < min_curr_limit || |
| oledb->negative_curr_limit > max_curr_limit) { |
| pr_err("Invalid value in qcom,negative-curr-limit-ma\n"); |
| return -EINVAL; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int qpnp_oledb_parse_psm(struct qpnp_oledb *oledb) |
| { |
| int rc = 0; |
| struct qpnp_oledb_psm_ctl *psm_ctl = &oledb->psm_ctl; |
| struct device_node *of_node = oledb->dev->of_node; |
| |
| psm_ctl->psm_enable = -EINVAL; |
| rc = of_property_read_u32(of_node, "qcom,psm-enable", |
| &psm_ctl->psm_enable); |
| if (!rc) { |
| psm_ctl->psm_hys_ctl = -EINVAL; |
| rc = of_property_read_u32(of_node, "qcom,psm-hys-mv", |
| &psm_ctl->psm_hys_ctl); |
| if (!rc) { |
| if (psm_ctl->psm_hys_ctl < OLEDB_PSM_HYS_CTRL_MIN || |
| psm_ctl->psm_hys_ctl > OLEDB_PSM_HYS_CTRL_MAX) { |
| pr_err("Invalid value in qcom,psm-hys-mv\n"); |
| return -EINVAL; |
| } |
| } |
| |
| psm_ctl->psm_vref = -EINVAL; |
| rc = of_property_read_u32(of_node, "qcom,psm-vref-mv", |
| &psm_ctl->psm_vref); |
| if (!rc) { |
| u16 min_vref = oledb_psm_vref_mv[0]; |
| u16 max_vref = oledb_psm_vref_mv[ARRAY_SIZE( |
| oledb_psm_vref_mv) - 1]; |
| if (psm_ctl->psm_vref < min_vref || |
| psm_ctl->psm_vref > max_vref) { |
| pr_err("Invalid value in qcom,psm-vref-mv\n"); |
| return -EINVAL; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int qpnp_oledb_parse_pfm(struct qpnp_oledb *oledb) |
| { |
| int rc = 0; |
| struct qpnp_oledb_pfm_ctl *pfm_ctl = &oledb->pfm_ctl; |
| struct device_node *of_node = oledb->dev->of_node; |
| |
| pfm_ctl->pfm_enable = -EINVAL; |
| rc = of_property_read_u32(of_node, "qcom,pfm-enable", |
| &pfm_ctl->pfm_enable); |
| if (!rc) { |
| pfm_ctl->pfm_hys_ctl = -EINVAL; |
| rc = of_property_read_u32(of_node, "qcom,pfm-hys-mv", |
| &pfm_ctl->pfm_hys_ctl); |
| if (!rc) { |
| if (pfm_ctl->pfm_hys_ctl < OLEDB_PFM_HYS_CTRL_MIN || |
| pfm_ctl->pfm_hys_ctl > OLEDB_PFM_HYS_CTRL_MAX) { |
| pr_err("Invalid value in qcom,pfm-hys-mv\n"); |
| return -EINVAL; |
| } |
| } |
| |
| pfm_ctl->pfm_curr_limit = -EINVAL; |
| rc = of_property_read_u32(of_node, |
| "qcom,pfm-curr-limit-ma", &pfm_ctl->pfm_curr_limit); |
| if (!rc) { |
| u16 min_limit = oledb_pfm_curr_limit_ma[0]; |
| u16 max_limit = oledb_pfm_curr_limit_ma[ARRAY_SIZE( |
| oledb_pfm_curr_limit_ma) - 1]; |
| if (pfm_ctl->pfm_curr_limit < min_limit || |
| pfm_ctl->pfm_curr_limit > max_limit) { |
| pr_err("Invalid value in qcom,pfm-curr-limit-ma\n"); |
| return -EINVAL; |
| } |
| } |
| |
| pfm_ctl->pfm_off_time = -EINVAL; |
| rc = of_property_read_u32(of_node, "qcom,pfm-off-time-ns", |
| &pfm_ctl->pfm_off_time); |
| if (!rc) { |
| if (pfm_ctl->pfm_off_time < OLEDB_PFM_OFF_TIME_MIN || |
| pfm_ctl->pfm_off_time > OLEDB_PFM_OFF_TIME_MAX) { |
| pr_err("Invalid value in qcom,pfm-off-time-ns\n"); |
| return -EINVAL; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int qpnp_oledb_parse_fast_precharge(struct qpnp_oledb *oledb) |
| { |
| int rc = 0; |
| struct device_node *of_node = oledb->dev->of_node; |
| struct qpnp_oledb_fast_precharge_ctl *fast_prechg = |
| &oledb->fast_prechg_ctl; |
| |
| fast_prechg->fast_prechg_ppulse_en = -EINVAL; |
| rc = of_property_read_u32(of_node, "qcom,fast-precharge-ppulse-enable", |
| &fast_prechg->fast_prechg_ppulse_en); |
| if (!rc) { |
| fast_prechg->prechg_debounce_time = -EINVAL; |
| rc = of_property_read_u32(of_node, |
| "qcom,precharge-debounce-time-ms", |
| &fast_prechg->prechg_debounce_time); |
| if (!rc) { |
| int dbnc_time = fast_prechg->prechg_debounce_time; |
| |
| if (dbnc_time < OLEDB_PRECHG_TIME_MIN || dbnc_time > |
| OLEDB_PRECHG_TIME_MAX) { |
| pr_err("Invalid value in qcom,precharge-debounce-time-ms\n"); |
| return -EINVAL; |
| } |
| } |
| |
| fast_prechg->prechg_pulse_period = -EINVAL; |
| rc = of_property_read_u32(of_node, |
| "qcom,precharge-pulse-period-us", |
| &fast_prechg->prechg_pulse_period); |
| if (!rc) { |
| int pulse_period = fast_prechg->prechg_pulse_period; |
| |
| if (pulse_period < OLEDB_PRECHG_PULSE_PERIOD_MIN || |
| pulse_period > OLEDB_PRECHG_PULSE_PERIOD_MAX) { |
| pr_err("Invalid value in qcom,precharge-pulse-period-us\n"); |
| return -EINVAL; |
| } |
| } |
| |
| fast_prechg->prechg_pulse_on_time = -EINVAL; |
| rc = of_property_read_u32(of_node, |
| "qcom,precharge-pulse-on-time-ns", |
| &fast_prechg->prechg_pulse_on_time); |
| if (!rc) { |
| int pulse_on_time = fast_prechg->prechg_pulse_on_time; |
| |
| if (pulse_on_time < OLEDB_PRECHG_PULSE_ON_TIME_MIN || |
| pulse_on_time > OLEDB_PRECHG_PULSE_ON_TIME_MAX) { |
| pr_err("Invalid value in qcom,precharge-pulse-on-time-ns\n"); |
| return -EINVAL; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int qpnp_oledb_parse_dt(struct qpnp_oledb *oledb) |
| { |
| int rc = 0; |
| struct device_node *revid_dev_node; |
| struct device_node *of_node = oledb->dev->of_node; |
| |
| revid_dev_node = of_parse_phandle(oledb->dev->of_node, |
| "qcom,pmic-revid", 0); |
| if (!revid_dev_node) { |
| pr_err("Missing qcom,pmic-revid property - driver failed\n"); |
| return -EINVAL; |
| } |
| |
| oledb->pmic_rev_id = get_revid_data(revid_dev_node); |
| if (IS_ERR(oledb->pmic_rev_id)) { |
| pr_debug("Unable to get revid data\n"); |
| return -EPROBE_DEFER; |
| } |
| |
| oledb->swire_control = |
| of_property_read_bool(of_node, "qcom,swire-control"); |
| |
| oledb->ext_pin_control = |
| of_property_read_bool(of_node, "qcom,ext-pin-control"); |
| |
| if (oledb->ext_pin_control) |
| oledb->dynamic_ext_pinctl_config = |
| of_property_read_bool(of_node, |
| "qcom,dynamic-ext-pinctl-config"); |
| oledb->pbs_control = |
| of_property_read_bool(of_node, "qcom,pbs-control"); |
| |
| /* Use the force_pd_control only for PM660A versions <= v2.0 */ |
| if (oledb->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE && |
| oledb->pmic_rev_id->rev4 <= PM660L_V2P0_REV4) { |
| if (!(oledb->pmic_rev_id->rev4 == PM660L_V2P0_REV4 && |
| oledb->pmic_rev_id->rev2 > PM660L_V2P0_REV2)) { |
| oledb->force_pd_control = true; |
| } |
| } |
| |
| if (oledb->force_pd_control) { |
| oledb->pbs_dev_node = of_parse_phandle(of_node, |
| "qcom,pbs-client", 0); |
| if (!oledb->pbs_dev_node) { |
| pr_err("Missing qcom,pbs-client property\n"); |
| return -EINVAL; |
| } |
| } |
| |
| oledb->current_voltage = -EINVAL; |
| rc = of_property_read_u32(of_node, "qcom,oledb-init-voltage-mv", |
| &oledb->current_voltage); |
| if (!rc && (oledb->current_voltage < OLEDB_VOUT_MIN_MV || |
| oledb->current_voltage > OLEDB_VOUT_MAX_MV)) { |
| pr_err("Invalid value in qcom,oledb-init-voltage-mv\n"); |
| return -EINVAL; |
| } |
| |
| oledb->default_voltage = -EINVAL; |
| rc = of_property_read_u32(of_node, "qcom,oledb-default-voltage-mv", |
| &oledb->default_voltage); |
| if (!rc && (oledb->default_voltage < OLEDB_VOUT_MIN_MV || |
| oledb->default_voltage > OLEDB_VOUT_MAX_MV)) { |
| pr_err("Invalid value in qcom,oledb-default-voltage-mv\n"); |
| return -EINVAL; |
| } |
| |
| oledb->warmup_delay = -EINVAL; |
| rc = of_property_read_u32(of_node, "qcom,bias-gen-warmup-delay-ns", |
| &oledb->warmup_delay); |
| if (!rc) { |
| u16 min_delay = oledb_warmup_dly_ns[0]; |
| u16 max_delay = oledb_warmup_dly_ns[ARRAY_SIZE( |
| oledb_warmup_dly_ns) - 1]; |
| if (oledb->warmup_delay < min_delay || |
| oledb->warmup_delay > max_delay) { |
| pr_err("Invalid value in qcom,bias-gen-warmup-delay-ns\n"); |
| return -EINVAL; |
| } |
| } |
| |
| oledb->peak_curr_limit = -EINVAL; |
| rc = of_property_read_u32(of_node, "qcom,peak-curr-limit-ma", |
| &oledb->peak_curr_limit); |
| if (!rc) { |
| u16 min_limit = oledb_peak_curr_limit_ma[0]; |
| u16 max_limit = oledb_peak_curr_limit_ma[ARRAY_SIZE( |
| oledb_peak_curr_limit_ma) - 1]; |
| if (oledb->peak_curr_limit < min_limit || |
| oledb->peak_curr_limit > max_limit) { |
| pr_err("Invalid value in qcom,peak-curr-limit-ma\n"); |
| return -EINVAL; |
| } |
| } |
| |
| oledb->pd_ctl = -EINVAL; |
| of_property_read_u32(of_node, "qcom,pull-down-enable", &oledb->pd_ctl); |
| |
| oledb->sc_en = -EINVAL; |
| rc = of_property_read_u32(of_node, "qcom,enable-short-circuit", |
| &oledb->sc_en); |
| if (!rc) { |
| oledb->sc_dbnc_time = -EINVAL; |
| rc = of_property_read_u32(of_node, |
| "qcom,short-circuit-dbnc-time", &oledb->sc_dbnc_time); |
| if (!rc) { |
| if (oledb->sc_dbnc_time < OLEDB_MIN_SC_DBNC_TIME_FSW || |
| oledb->sc_dbnc_time > OLEDB_MAX_SC_DBNC_TIME_FSW) { |
| pr_err("Invalid value in qcom,short-circuit-dbnc-time\n"); |
| return -EINVAL; |
| } |
| } |
| } |
| |
| rc = qpnp_oledb_parse_nlimit(oledb); |
| if (rc < 0) |
| return rc; |
| |
| rc = qpnp_oledb_parse_psm(oledb); |
| if (rc < 0) |
| return rc; |
| |
| rc = qpnp_oledb_parse_pfm(oledb); |
| if (rc < 0) |
| return rc; |
| |
| rc = qpnp_oledb_parse_fast_precharge(oledb); |
| |
| return rc; |
| } |
| |
| static int qpnp_oledb_force_pulldown_config(struct qpnp_oledb *oledb) |
| { |
| int rc = 0; |
| u8 val; |
| |
| val = 1; |
| rc = qpnp_oledb_write(oledb, oledb->base + OLEDB_PD_CTL, |
| &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to write PD_CTL rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_oledb_masked_write(oledb, oledb->base + |
| OLEDB_SWIRE_CONTROL, OLEDB_EN_SWIRE_PD_UPD_BIT, 0); |
| if (rc < 0) |
| pr_err("Failed to write SWIRE_CTL for pbs mode rc=%d\n", |
| rc); |
| |
| return rc; |
| } |
| |
| static int qpnp_labibb_notifier_cb(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| int rc = 0; |
| u8 val; |
| struct qpnp_oledb *oledb = container_of(nb, struct qpnp_oledb, |
| oledb_nb); |
| |
| if (oledb->secure_mode) |
| return 0; |
| |
| if (action == LAB_VREG_NOT_OK) { |
| /* short circuit detected. Disable OLEDB module */ |
| val = 0; |
| rc = qpnp_oledb_write(oledb, oledb->base + OLEDB_MODULE_RDY, |
| &val, 1); |
| if (rc < 0) { |
| pr_err("Failed to write MODULE_RDY rc=%d\n", rc); |
| return NOTIFY_STOP; |
| } |
| oledb->lab_sc_detected = true; |
| oledb->mod_enable = false; |
| pr_crit("LAB SC detected, disabling OLEDB forever!\n"); |
| } |
| |
| if (action == LAB_VREG_OK) { |
| /* Disable SWIRE pull down control and enable via spmi mode */ |
| rc = qpnp_oledb_force_pulldown_config(oledb); |
| if (rc < 0) { |
| pr_err("Failed to config force pull down\n"); |
| return NOTIFY_STOP; |
| } |
| } |
| |
| return NOTIFY_OK; |
| } |
| |
| static struct class_attribute oledb_attributes[] = { |
| [0] = __ATTR(secure_mode, 0664, NULL, NULL), |
| __ATTR_NULL, |
| }; |
| static int qpnp_oledb_regulator_probe(struct platform_device *pdev) |
| { |
| int rc = 0; |
| u32 val; |
| struct qpnp_oledb *oledb; |
| struct device_node *of_node = pdev->dev.of_node; |
| |
| oledb = devm_kzalloc(&pdev->dev, |
| sizeof(struct qpnp_oledb), GFP_KERNEL); |
| if (!oledb) |
| return -ENOMEM; |
| |
| oledb->pdev = pdev; |
| oledb->dev = &pdev->dev; |
| oledb->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| dev_set_drvdata(&pdev->dev, oledb); |
| if (!oledb->regmap) { |
| pr_err("Couldn't get parent's regmap\n"); |
| return -EINVAL; |
| } |
| |
| rc = of_property_read_u32(of_node, "reg", &val); |
| if (rc < 0) { |
| pr_err("Couldn't find reg in node, rc = %d\n", rc); |
| return rc; |
| } |
| |
| mutex_init(&(oledb->bus_lock)); |
| oledb->base = val; |
| rc = qpnp_oledb_parse_dt(oledb); |
| if (rc < 0) { |
| pr_err("Failed to parse common OLEDB device tree\n"); |
| return rc; |
| } |
| |
| rc = qpnp_oledb_hw_init(oledb); |
| if (rc < 0) { |
| pr_err("Failed to initialize OLEDB, rc=%d\n", rc); |
| return rc; |
| } |
| |
| /* Enable LAB short circuit notification support */ |
| if (oledb->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE) |
| oledb->handle_lab_sc_notification = true; |
| |
| if (oledb->force_pd_control || oledb->handle_lab_sc_notification) { |
| oledb->oledb_nb.notifier_call = qpnp_labibb_notifier_cb; |
| rc = qpnp_labibb_notifier_register(&oledb->oledb_nb); |
| if (rc < 0) { |
| pr_err("Failed to register qpnp_labibb_notifier_cb\n"); |
| return rc; |
| } |
| } |
| |
| rc = qpnp_oledb_register_regulator(oledb); |
| if (rc < 0) { |
| pr_err("Failed to register regulator rc=%d\n", rc); |
| goto out; |
| } |
| |
| oledb->oledb_class.name = "amoled_bias"; |
| oledb->oledb_class.owner = THIS_MODULE; |
| oledb->oledb_class.class_attrs = oledb_attributes; |
| |
| rc = class_register(&oledb->oledb_class); |
| if (rc < 0) { |
| pr_err("Failed to register oledb class rc = %d\n", rc); |
| return rc; |
| } |
| |
| pr_info("OLEDB registered successfully, ext_pin_en=%d mod_en=%d current_voltage=%d mV\n", |
| oledb->ext_pin_control, oledb->mod_enable, |
| oledb->current_voltage); |
| return 0; |
| |
| out: |
| if (oledb->force_pd_control) { |
| rc = qpnp_labibb_notifier_unregister(&oledb->oledb_nb); |
| if (rc < 0) |
| pr_err("Failed to unregister lab_vreg_ok notifier\n"); |
| } |
| |
| return rc; |
| } |
| |
| static int qpnp_oledb_regulator_remove(struct platform_device *pdev) |
| { |
| int rc = 0; |
| struct qpnp_oledb *oledb = platform_get_drvdata(pdev); |
| |
| if (oledb->force_pd_control) { |
| rc = qpnp_labibb_notifier_unregister(&oledb->oledb_nb); |
| if (rc < 0) |
| pr_err("Failed to unregister lab_vreg_ok notifier\n"); |
| } |
| |
| return rc; |
| } |
| |
| const struct of_device_id qpnp_oledb_regulator_match_table[] = { |
| { .compatible = QPNP_OLEDB_REGULATOR_DRIVER_NAME,}, |
| { }, |
| }; |
| |
| static struct platform_driver qpnp_oledb_regulator_driver = { |
| .driver = { |
| .name = QPNP_OLEDB_REGULATOR_DRIVER_NAME, |
| .of_match_table = qpnp_oledb_regulator_match_table, |
| }, |
| .probe = qpnp_oledb_regulator_probe, |
| .remove = qpnp_oledb_regulator_remove, |
| }; |
| |
| static int __init qpnp_oledb_regulator_init(void) |
| { |
| return platform_driver_register(&qpnp_oledb_regulator_driver); |
| } |
| arch_initcall(qpnp_oledb_regulator_init); |
| |
| static void __exit qpnp_oledb_regulator_exit(void) |
| { |
| platform_driver_unregister(&qpnp_oledb_regulator_driver); |
| } |
| module_exit(qpnp_oledb_regulator_exit); |
| |
| MODULE_DESCRIPTION("QPNP OLEDB driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("qpnp-oledb-regulator"); |