drivers/char/watchdog/eurotechwdt.c - kernel/msm-4.9 - Gitiles

 /*
  *	Eurotech CPU-1220/1410 on board WDT driver
  *
  *	(c) Copyright 2001 Ascensit <support@ascensit.com>
  *	(c) Copyright 2001 Rodolfo Giometti <giometti@ascensit.com>
  *	(c) Copyright 2002 Rob Radez <rob@osinvestor.com>
  *
  *	Based on wdt.c.
  *	Original copyright messages:
  *
  *      (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved.
  *                              http://www.redhat.com
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
  *
  *      Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
  *      warranty for any of this software. This material is provided
  *      "AS-IS" and at no charge.
  *
  *      (c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>*
  */

 /* Changelog:
  *
  * 2002/04/25 - Rob Radez
  *	clean up #includes
  *	clean up locking
  *	make __setup param unique
  *	proper options in watchdog_info
  *	add WDIOC_GETSTATUS and WDIOC_SETOPTIONS ioctls
  *	add expect_close support
  *
  * 2001 - Rodolfo Giometti
  *	Initial release
  *
  * 2002.05.30 - Joel Becker <joel.becker@oracle.com>
  * 	Added Matt Domsch's nowayout module option.
  */

 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/types.h>
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/fs.h>
 #include <linux/ioport.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>

 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>

 static unsigned long eurwdt_is_open;
 static int eurwdt_timeout;
 static char eur_expect_close;

 /*
  * You must set these - there is no sane way to probe for this board.
  * You can use eurwdt=x,y to set these now.
  */

 static int io = 0x3f0;
 static int irq = 10;
 static char *ev = "int";

 #define WDT_TIMEOUT		60                /* 1 minute */

 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");

 /*
  * Some symbolic names
  */

 #define WDT_CTRL_REG		0x30
 #define WDT_OUTPIN_CFG		0xe2
 #define WDT_EVENT_INT		0x00
 #define WDT_EVENT_REBOOT	0x08
 #define WDT_UNIT_SEL		0xf1
 #define WDT_UNIT_SECS		0x80
 #define WDT_TIMEOUT_VAL		0xf2
 #define WDT_TIMER_CFG		0xf3


 module_param(io, int, 0);
 MODULE_PARM_DESC(io, "Eurotech WDT io port (default=0x3f0)");
 module_param(irq, int, 0);
 MODULE_PARM_DESC(irq, "Eurotech WDT irq (default=10)");
 module_param(ev, charp, 0);
 MODULE_PARM_DESC(ev, "Eurotech WDT event type (default is `int')");


 /*
  * Programming support
  */

 static inline void eurwdt_write_reg(u8 index, u8 data)
 {
 	outb(index, io);
 	outb(data, io+1);
 }

 static inline void eurwdt_lock_chip(void)
 {
 	outb(0xaa, io);
 }

 static inline void eurwdt_unlock_chip(void)
 {
 	outb(0x55, io);
 	eurwdt_write_reg(0x07, 0x08);	/* set the logical device */
 }

 static inline void eurwdt_set_timeout(int timeout)
 {
 	eurwdt_write_reg(WDT_TIMEOUT_VAL, (u8) timeout);
 }

 static inline void eurwdt_disable_timer(void)
 {
 	eurwdt_set_timeout(0);
 }

 static void eurwdt_activate_timer(void)
 {
 	eurwdt_disable_timer();
 	eurwdt_write_reg(WDT_CTRL_REG, 0x01);	/* activate the WDT */
 	eurwdt_write_reg(WDT_OUTPIN_CFG, !strcmp("int", ev) ? WDT_EVENT_INT : WDT_EVENT_REBOOT);

 	/* Setting interrupt line */
 	if (irq == 2 || irq > 15 || irq < 0) {
 		printk(KERN_ERR ": invalid irq number\n");
 		irq = 0;	/* if invalid we disable interrupt */
 	}
 	if (irq == 0)
 		printk(KERN_INFO ": interrupt disabled\n");

 	eurwdt_write_reg(WDT_TIMER_CFG, irq<<4);

 	eurwdt_write_reg(WDT_UNIT_SEL, WDT_UNIT_SECS);	/* we use seconds */
 	eurwdt_set_timeout(0);	/* the default timeout */
 }


 /*
  * Kernel methods.
  */

 static irqreturn_t eurwdt_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	printk(KERN_CRIT "timeout WDT timeout\n");

 #ifdef ONLY_TESTING
 	printk(KERN_CRIT "Would Reboot.\n");
 #else
 	printk(KERN_CRIT "Initiating system reboot.\n");
 	emergency_restart();
 #endif
 	return IRQ_HANDLED;
 }


 /**
  * eurwdt_ping:
  *
  * Reload counter one with the watchdog timeout.
  */

 static void eurwdt_ping(void)
 {
 	/* Write the watchdog default value */
 	eurwdt_set_timeout(eurwdt_timeout);
 }

 /**
  * eurwdt_write:
  * @file: file handle to the watchdog
  * @buf: buffer to write (unused as data does not matter here
  * @count: count of bytes
  * @ppos: pointer to the position to write. No seeks allowed
  *
  * A write to a watchdog device is defined as a keepalive signal. Any
  * write of data will do, as we we don't define content meaning.
  */

 static ssize_t eurwdt_write(struct file *file, const char __user *buf,
 size_t count, loff_t *ppos)
 {
 	if (count) 	{
 		if (!nowayout) {
 			size_t i;

 			eur_expect_close = 0;

 			for (i = 0; i != count; i++) {
 				char c;
 				if(get_user(c, buf+i))
 					return -EFAULT;
 				if (c == 'V')
 					eur_expect_close = 42;
 			}
 		}
 		eurwdt_ping();	/* the default timeout */
 	}

 	return count;
 }

 /**
  * eurwdt_ioctl:
  * @inode: inode of the device
  * @file: file handle to the device
  * @cmd: watchdog command
  * @arg: argument pointer
  *
  * The watchdog API defines a common set of functions for all watchdogs
  * according to their available features.
  */

 static int eurwdt_ioctl(struct inode *inode, struct file *file,
 	unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	static struct watchdog_info ident = {
 		.options	  = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity	  = "WDT Eurotech CPU-1220/1410",
 	};

 	int time;
 	int options, retval = -EINVAL;

 	switch(cmd) {
 	default:
 		return -ENOIOCTLCMD;

 	case WDIOC_GETSUPPORT:
 		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;

 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, p);

 	case WDIOC_KEEPALIVE:
 		eurwdt_ping();
 		return 0;

 	case WDIOC_SETTIMEOUT:
 		if (copy_from_user(&time, p, sizeof(int)))
 			return -EFAULT;

 		/* Sanity check */
 		if (time < 0 || time > 255)
 			return -EINVAL;

 		eurwdt_timeout = time;
 		eurwdt_set_timeout(time);
 		/* Fall */

 	case WDIOC_GETTIMEOUT:
 		return put_user(eurwdt_timeout, p);

 	case WDIOC_SETOPTIONS:
 		if (get_user(options, p))
 			return -EFAULT;
 		if (options & WDIOS_DISABLECARD) {
 			eurwdt_disable_timer();
 			retval = 0;
 		}
 		if (options & WDIOS_ENABLECARD) {
 			eurwdt_activate_timer();
 			eurwdt_ping();
 			retval = 0;
 		}
 		return retval;
 	}
 }

 /**
  * eurwdt_open:
  * @inode: inode of device
  * @file: file handle to device
  *
  * The misc device has been opened. The watchdog device is single
  * open and on opening we load the counter.
  */

 static int eurwdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(0, &eurwdt_is_open))
 		return -EBUSY;
 	eurwdt_timeout = WDT_TIMEOUT;	/* initial timeout */
 	/* Activate the WDT */
 	eurwdt_activate_timer();
 	return nonseekable_open(inode, file);
 }

 /**
  * eurwdt_release:
  * @inode: inode to board
  * @file: file handle to board
  *
  * The watchdog has a configurable API. There is a religious dispute
  * between people who want their watchdog to be able to shut down and
  * those who want to be sure if the watchdog manager dies the machine
  * reboots. In the former case we disable the counters, in the latter
  * case you have to open it again very soon.
  */

 static int eurwdt_release(struct inode *inode, struct file *file)
 {
 	if (eur_expect_close == 42) {
 		eurwdt_disable_timer();
 	} else {
 		printk(KERN_CRIT "eurwdt: Unexpected close, not stopping watchdog!\n");
 		eurwdt_ping();
 	}
 	clear_bit(0, &eurwdt_is_open);
 	eur_expect_close = 0;
 	return 0;
 }

 /**
  * eurwdt_notify_sys:
  * @this: our notifier block
  * @code: the event being reported
  * @unused: unused
  *
  * Our notifier is called on system shutdowns. We want to turn the card
  * off at reboot otherwise the machine will reboot again during memory
  * test or worse yet during the following fsck. This would suck, in fact
  * trust me - if it happens it does suck.
  */

 static int eurwdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
 	if (code == SYS_DOWN || code == SYS_HALT) {
 		/* Turn the card off */
 		eurwdt_disable_timer();
 	}

 	return NOTIFY_DONE;
 }

 /*
  * Kernel Interfaces
  */


 static const struct file_operations eurwdt_fops = {
 	.owner	= THIS_MODULE,
 	.llseek	= no_llseek,
 	.write	= eurwdt_write,
 	.ioctl	= eurwdt_ioctl,
 	.open	= eurwdt_open,
 	.release	= eurwdt_release,
 };

 static struct miscdevice eurwdt_miscdev = {
 	.minor	= WATCHDOG_MINOR,
 	.name	= "watchdog",
 	.fops	= &eurwdt_fops,
 };

 /*
  * The WDT card needs to learn about soft shutdowns in order to
  * turn the timebomb registers off.
  */

 static struct notifier_block eurwdt_notifier = {
 	.notifier_call = eurwdt_notify_sys,
 };

 /**
  * cleanup_module:
  *
  * Unload the watchdog. You cannot do this with any file handles open.
  * If your watchdog is set to continue ticking on close and you unload
  * it, well it keeps ticking. We won't get the interrupt but the board
  * will not touch PC memory so all is fine. You just have to load a new
  * module in 60 seconds or reboot.
  */

 static void __exit eurwdt_exit(void)
 {
 	eurwdt_lock_chip();

 	misc_deregister(&eurwdt_miscdev);

 	unregister_reboot_notifier(&eurwdt_notifier);
 	release_region(io, 2);
 	free_irq(irq, NULL);
 }

 /**
  * eurwdt_init:
  *
  * Set up the WDT watchdog board. After grabbing the resources
  * we require we need also to unlock the device.
  * The open() function will actually kick the board off.
  */

 static int __init eurwdt_init(void)
 {
 	int ret;

 	ret = misc_register(&eurwdt_miscdev);
 	if (ret) {
 		printk(KERN_ERR "eurwdt: can't misc_register on minor=%d\n",
 		WATCHDOG_MINOR);
 		goto out;
 	}

 	ret = request_irq(irq, eurwdt_interrupt, IRQF_DISABLED, "eurwdt", NULL);
 	if(ret) {
 		printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq);
 		goto outmisc;
 	}

 	if (!request_region(io, 2, "eurwdt")) {
 		printk(KERN_ERR "eurwdt: IO %X is not free.\n", io);
 		ret = -EBUSY;
 		goto outirq;
 	}

 	ret = register_reboot_notifier(&eurwdt_notifier);
 	if (ret) {
 		printk(KERN_ERR "eurwdt: can't register reboot notifier (err=%d)\n", ret);
 		goto outreg;
 	}

 	eurwdt_unlock_chip();

 	ret = 0;
 	printk(KERN_INFO "Eurotech WDT driver 0.01 at %X (Interrupt %d)"
 		" - timeout event: %s\n",
 		io, irq, (!strcmp("int", ev) ? "int" : "reboot"));

 out:
 	return ret;

 outreg:
 	release_region(io, 2);

 outirq:
 	free_irq(irq, NULL);

 outmisc:
 	misc_deregister(&eurwdt_miscdev);
 	goto out;
 }

 module_init(eurwdt_init);
 module_exit(eurwdt_exit);

 MODULE_AUTHOR("Rodolfo Giometti");
 MODULE_DESCRIPTION("Driver for Eurotech CPU-1220/1410 on board watchdog");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
	/*
	* Eurotech CPU-1220/1410 on board WDT driver
	*
	* (c) Copyright 2001 Ascensit <support@ascensit.com>
	* (c) Copyright 2001 Rodolfo Giometti <giometti@ascensit.com>
	* (c) Copyright 2002 Rob Radez <rob@osinvestor.com>
	*
	* Based on wdt.c.
	* Original copyright messages:
	*
	* (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved.
	* http://www.redhat.com
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version
	* 2 of the License, or (at your option) any later version.
	*
	* Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
	* warranty for any of this software. This material is provided
	* "AS-IS" and at no charge.
	*
	* (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>*
	*/

	/* Changelog:
	*
	* 2002/04/25 - Rob Radez
	* clean up #includes
	* clean up locking
	* make __setup param unique
	* proper options in watchdog_info
	* add WDIOC_GETSTATUS and WDIOC_SETOPTIONS ioctls
	* add expect_close support
	*
	* 2001 - Rodolfo Giometti
	* Initial release
	*
	* 2002.05.30 - Joel Becker <joel.becker@oracle.com>
	* Added Matt Domsch's nowayout module option.
	*/

	#include <linux/interrupt.h>
	#include <linux/module.h>
	#include <linux/moduleparam.h>
	#include <linux/types.h>
	#include <linux/miscdevice.h>
	#include <linux/watchdog.h>
	#include <linux/fs.h>
	#include <linux/ioport.h>
	#include <linux/notifier.h>
	#include <linux/reboot.h>
	#include <linux/init.h>

	#include <asm/io.h>
	#include <asm/uaccess.h>
	#include <asm/system.h>

	static unsigned long eurwdt_is_open;
	static int eurwdt_timeout;
	static char eur_expect_close;

	/*
	* You must set these - there is no sane way to probe for this board.
	* You can use eurwdt=x,y to set these now.
	*/

	static int io = 0x3f0;
	static int irq = 10;
	static char *ev = "int";

	#define WDT_TIMEOUT 60 /* 1 minute */

	static int nowayout = WATCHDOG_NOWAYOUT;
	module_param(nowayout, int, 0);
	MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");

	/*
	* Some symbolic names
	*/

	#define WDT_CTRL_REG 0x30
	#define WDT_OUTPIN_CFG 0xe2
	#define WDT_EVENT_INT 0x00
	#define WDT_EVENT_REBOOT 0x08
	#define WDT_UNIT_SEL 0xf1
	#define WDT_UNIT_SECS 0x80
	#define WDT_TIMEOUT_VAL 0xf2
	#define WDT_TIMER_CFG 0xf3


	module_param(io, int, 0);
	MODULE_PARM_DESC(io, "Eurotech WDT io port (default=0x3f0)");
	module_param(irq, int, 0);
	MODULE_PARM_DESC(irq, "Eurotech WDT irq (default=10)");
	module_param(ev, charp, 0);
	MODULE_PARM_DESC(ev, "Eurotech WDT event type (default is `int')");


	/*
	* Programming support
	*/

	static inline void eurwdt_write_reg(u8 index, u8 data)
	{
	outb(index, io);
	outb(data, io+1);
	}

	static inline void eurwdt_lock_chip(void)
	{
	outb(0xaa, io);
	}

	static inline void eurwdt_unlock_chip(void)
	{
	outb(0x55, io);
	eurwdt_write_reg(0x07, 0x08); /* set the logical device */
	}

	static inline void eurwdt_set_timeout(int timeout)
	{
	eurwdt_write_reg(WDT_TIMEOUT_VAL, (u8) timeout);
	}

	static inline void eurwdt_disable_timer(void)
	{
	eurwdt_set_timeout(0);
	}

	static void eurwdt_activate_timer(void)
	{
	eurwdt_disable_timer();
	eurwdt_write_reg(WDT_CTRL_REG, 0x01); /* activate the WDT */
	eurwdt_write_reg(WDT_OUTPIN_CFG, !strcmp("int", ev) ? WDT_EVENT_INT : WDT_EVENT_REBOOT);

	/* Setting interrupt line */
	if (irq == 2 \|\| irq > 15 \|\| irq < 0) {
	printk(KERN_ERR ": invalid irq number\n");
	irq = 0; /* if invalid we disable interrupt */
	}
	if (irq == 0)
	printk(KERN_INFO ": interrupt disabled\n");

	eurwdt_write_reg(WDT_TIMER_CFG, irq<<4);

	eurwdt_write_reg(WDT_UNIT_SEL, WDT_UNIT_SECS); /* we use seconds */
	eurwdt_set_timeout(0); /* the default timeout */
	}


	/*
	* Kernel methods.
	*/

	static irqreturn_t eurwdt_interrupt(int irq, void dev_id, struct pt_regs regs)
	{
	printk(KERN_CRIT "timeout WDT timeout\n");

	#ifdef ONLY_TESTING
	printk(KERN_CRIT "Would Reboot.\n");
	#else
	printk(KERN_CRIT "Initiating system reboot.\n");
	emergency_restart();
	#endif
	return IRQ_HANDLED;
	}


	/**
	* eurwdt_ping:
	*
	* Reload counter one with the watchdog timeout.
	*/

	static void eurwdt_ping(void)
	{
	/* Write the watchdog default value */
	eurwdt_set_timeout(eurwdt_timeout);
	}

	/**
	* eurwdt_write:
	* @file: file handle to the watchdog
	* @buf: buffer to write (unused as data does not matter here
	* @count: count of bytes
	* @ppos: pointer to the position to write. No seeks allowed
	*
	* A write to a watchdog device is defined as a keepalive signal. Any
	* write of data will do, as we we don't define content meaning.
	*/

	static ssize_t eurwdt_write(struct file file, const char __user buf,
	size_t count, loff_t *ppos)
	{
	if (count) {
	if (!nowayout) {
	size_t i;

	eur_expect_close = 0;

	for (i = 0; i != count; i++) {
	char c;
	if(get_user(c, buf+i))
	return -EFAULT;
	if (c == 'V')
	eur_expect_close = 42;
	}
	}
	eurwdt_ping(); /* the default timeout */
	}

	return count;
	}

	/**
	* eurwdt_ioctl:
	* @inode: inode of the device
	* @file: file handle to the device
	* @cmd: watchdog command
	* @arg: argument pointer
	*
	* The watchdog API defines a common set of functions for all watchdogs
	* according to their available features.
	*/

	static int eurwdt_ioctl(struct inode inode, struct file file,
	unsigned int cmd, unsigned long arg)
	{
	void __user argp = (void __user )arg;
	int __user *p = argp;
	static struct watchdog_info ident = {
	.options = WDIOF_KEEPALIVEPING \| WDIOF_SETTIMEOUT \| WDIOF_MAGICCLOSE,
	.firmware_version = 1,
	.identity = "WDT Eurotech CPU-1220/1410",
	};

	int time;
	int options, retval = -EINVAL;

	switch(cmd) {
	default:
	return -ENOIOCTLCMD;

	case WDIOC_GETSUPPORT:
	return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;

	case WDIOC_GETSTATUS:
	case WDIOC_GETBOOTSTATUS:
	return put_user(0, p);

	case WDIOC_KEEPALIVE:
	eurwdt_ping();
	return 0;

	case WDIOC_SETTIMEOUT:
	if (copy_from_user(&time, p, sizeof(int)))
	return -EFAULT;

	/* Sanity check */
	if (time < 0 \|\| time > 255)
	return -EINVAL;

	eurwdt_timeout = time;
	eurwdt_set_timeout(time);
	/* Fall */

	case WDIOC_GETTIMEOUT:
	return put_user(eurwdt_timeout, p);

	case WDIOC_SETOPTIONS:
	if (get_user(options, p))
	return -EFAULT;
	if (options & WDIOS_DISABLECARD) {
	eurwdt_disable_timer();
	retval = 0;
	}
	if (options & WDIOS_ENABLECARD) {
	eurwdt_activate_timer();
	eurwdt_ping();
	retval = 0;
	}
	return retval;
	}
	}

	/**
	* eurwdt_open:
	* @inode: inode of device
	* @file: file handle to device
	*
	* The misc device has been opened. The watchdog device is single
	* open and on opening we load the counter.
	*/

	static int eurwdt_open(struct inode inode, struct file file)
	{
	if (test_and_set_bit(0, &eurwdt_is_open))
	return -EBUSY;
	eurwdt_timeout = WDT_TIMEOUT; /* initial timeout */
	/* Activate the WDT */
	eurwdt_activate_timer();
	return nonseekable_open(inode, file);
	}

	/**
	* eurwdt_release:
	* @inode: inode to board
	* @file: file handle to board
	*
	* The watchdog has a configurable API. There is a religious dispute
	* between people who want their watchdog to be able to shut down and
	* those who want to be sure if the watchdog manager dies the machine
	* reboots. In the former case we disable the counters, in the latter
	* case you have to open it again very soon.
	*/

	static int eurwdt_release(struct inode inode, struct file file)
	{
	if (eur_expect_close == 42) {
	eurwdt_disable_timer();
	} else {
	printk(KERN_CRIT "eurwdt: Unexpected close, not stopping watchdog!\n");
	eurwdt_ping();
	}
	clear_bit(0, &eurwdt_is_open);
	eur_expect_close = 0;
	return 0;
	}

	/**
	* eurwdt_notify_sys:
	* @this: our notifier block
	* @code: the event being reported
	* @unused: unused
	*
	* Our notifier is called on system shutdowns. We want to turn the card
	* off at reboot otherwise the machine will reboot again during memory
	* test or worse yet during the following fsck. This would suck, in fact
	* trust me - if it happens it does suck.
	*/

	static int eurwdt_notify_sys(struct notifier_block *this, unsigned long code,
	void *unused)
	{
	if (code == SYS_DOWN \|\| code == SYS_HALT) {
	/* Turn the card off */
	eurwdt_disable_timer();
	}

	return NOTIFY_DONE;
	}

	/*
	* Kernel Interfaces
	*/


	static const struct file_operations eurwdt_fops = {
	.owner = THIS_MODULE,
	.llseek = no_llseek,
	.write = eurwdt_write,
	.ioctl = eurwdt_ioctl,
	.open = eurwdt_open,
	.release = eurwdt_release,
	};

	static struct miscdevice eurwdt_miscdev = {
	.minor = WATCHDOG_MINOR,
	.name = "watchdog",
	.fops = &eurwdt_fops,
	};

	/*
	* The WDT card needs to learn about soft shutdowns in order to
	* turn the timebomb registers off.
	*/

	static struct notifier_block eurwdt_notifier = {
	.notifier_call = eurwdt_notify_sys,
	};

	/**
	* cleanup_module:
	*
	* Unload the watchdog. You cannot do this with any file handles open.
	* If your watchdog is set to continue ticking on close and you unload
	* it, well it keeps ticking. We won't get the interrupt but the board
	* will not touch PC memory so all is fine. You just have to load a new
	* module in 60 seconds or reboot.
	*/

	static void __exit eurwdt_exit(void)
	{
	eurwdt_lock_chip();

	misc_deregister(&eurwdt_miscdev);

	unregister_reboot_notifier(&eurwdt_notifier);
	release_region(io, 2);
	free_irq(irq, NULL);
	}

	/**
	* eurwdt_init:
	*
	* Set up the WDT watchdog board. After grabbing the resources
	* we require we need also to unlock the device.
	* The open() function will actually kick the board off.
	*/

	static int __init eurwdt_init(void)
	{
	int ret;

	ret = misc_register(&eurwdt_miscdev);
	if (ret) {
	printk(KERN_ERR "eurwdt: can't misc_register on minor=%d\n",
	WATCHDOG_MINOR);
	goto out;
	}

	ret = request_irq(irq, eurwdt_interrupt, IRQF_DISABLED, "eurwdt", NULL);
	if(ret) {
	printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq);
	goto outmisc;
	}

	if (!request_region(io, 2, "eurwdt")) {
	printk(KERN_ERR "eurwdt: IO %X is not free.\n", io);
	ret = -EBUSY;
	goto outirq;
	}

	ret = register_reboot_notifier(&eurwdt_notifier);
	if (ret) {
	printk(KERN_ERR "eurwdt: can't register reboot notifier (err=%d)\n", ret);
	goto outreg;
	}

	eurwdt_unlock_chip();

	ret = 0;
	printk(KERN_INFO "Eurotech WDT driver 0.01 at %X (Interrupt %d)"
	" - timeout event: %s\n",
	io, irq, (!strcmp("int", ev) ? "int" : "reboot"));

	out:
	return ret;

	outreg:
	release_region(io, 2);

	outirq:
	free_irq(irq, NULL);

	outmisc:
	misc_deregister(&eurwdt_miscdev);
	goto out;
	}

	module_init(eurwdt_init);
	module_exit(eurwdt_exit);

	MODULE_AUTHOR("Rodolfo Giometti");
	MODULE_DESCRIPTION("Driver for Eurotech CPU-1220/1410 on board watchdog");
	MODULE_LICENSE("GPL");
	MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);