| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called COPYING. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| *****************************************************************************/ |
| |
| #include <linux/etherdevice.h> |
| #include <net/mac80211.h> |
| |
| #include "mvm.h" |
| #include "iwl-eeprom-parse.h" |
| #include "fw-api-scan.h" |
| |
| #define IWL_PLCP_QUIET_THRESH 1 |
| #define IWL_ACTIVE_QUIET_TIME 10 |
| |
| static inline __le16 iwl_mvm_scan_rx_chain(struct iwl_mvm *mvm) |
| { |
| u16 rx_chain; |
| u8 rx_ant = iwl_fw_valid_rx_ant(mvm->fw); |
| |
| rx_chain = rx_ant << PHY_RX_CHAIN_VALID_POS; |
| rx_chain |= rx_ant << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS; |
| rx_chain |= rx_ant << PHY_RX_CHAIN_FORCE_SEL_POS; |
| rx_chain |= 0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS; |
| return cpu_to_le16(rx_chain); |
| } |
| |
| static inline __le32 iwl_mvm_scan_max_out_time(struct ieee80211_vif *vif) |
| { |
| if (vif->bss_conf.assoc) |
| return cpu_to_le32(200 * 1024); |
| else |
| return 0; |
| } |
| |
| static inline __le32 iwl_mvm_scan_suspend_time(struct ieee80211_vif *vif) |
| { |
| if (vif->bss_conf.assoc) |
| return cpu_to_le32(vif->bss_conf.beacon_int); |
| else |
| return 0; |
| } |
| |
| static inline __le32 |
| iwl_mvm_scan_rxon_flags(struct cfg80211_scan_request *req) |
| { |
| if (req->channels[0]->band == IEEE80211_BAND_2GHZ) |
| return cpu_to_le32(PHY_BAND_24); |
| else |
| return cpu_to_le32(PHY_BAND_5); |
| } |
| |
| static inline __le32 |
| iwl_mvm_scan_rate_n_flags(struct iwl_mvm *mvm, enum ieee80211_band band, |
| bool no_cck) |
| { |
| u32 tx_ant; |
| |
| mvm->scan_last_antenna_idx = |
| iwl_mvm_next_antenna(mvm, iwl_fw_valid_tx_ant(mvm->fw), |
| mvm->scan_last_antenna_idx); |
| tx_ant = BIT(mvm->scan_last_antenna_idx) << RATE_MCS_ANT_POS; |
| |
| if (band == IEEE80211_BAND_2GHZ && !no_cck) |
| return cpu_to_le32(IWL_RATE_1M_PLCP | RATE_MCS_CCK_MSK | |
| tx_ant); |
| else |
| return cpu_to_le32(IWL_RATE_6M_PLCP | tx_ant); |
| } |
| |
| /* |
| * We insert the SSIDs in an inverted order, because the FW will |
| * invert it back. The most prioritized SSID, which is first in the |
| * request list, is not copied here, but inserted directly to the probe |
| * request. |
| */ |
| static void iwl_mvm_scan_fill_ssids(struct iwl_scan_cmd *cmd, |
| struct cfg80211_scan_request *req) |
| { |
| int fw_idx, req_idx; |
| |
| for (req_idx = req->n_ssids - 1, fw_idx = 0; req_idx > 0; |
| req_idx--, fw_idx++) { |
| cmd->direct_scan[fw_idx].id = WLAN_EID_SSID; |
| cmd->direct_scan[fw_idx].len = req->ssids[req_idx].ssid_len; |
| memcpy(cmd->direct_scan[fw_idx].ssid, |
| req->ssids[req_idx].ssid, |
| req->ssids[req_idx].ssid_len); |
| } |
| } |
| |
| /* |
| * If req->n_ssids > 0, it means we should do an active scan. |
| * In case of active scan w/o directed scan, we receive a zero-length SSID |
| * just to notify that this scan is active and not passive. |
| * In order to notify the FW of the number of SSIDs we wish to scan (including |
| * the zero-length one), we need to set the corresponding bits in chan->type, |
| * one for each SSID, and set the active bit (first). The first SSID is already |
| * included in the probe template, so we need to set only req->n_ssids - 1 bits |
| * in addition to the first bit. |
| */ |
| static u16 iwl_mvm_get_active_dwell(enum ieee80211_band band, int n_ssids) |
| { |
| if (band == IEEE80211_BAND_2GHZ) |
| return 30 + 3 * (n_ssids + 1); |
| return 20 + 2 * (n_ssids + 1); |
| } |
| |
| static u16 iwl_mvm_get_passive_dwell(enum ieee80211_band band) |
| { |
| return band == IEEE80211_BAND_2GHZ ? 100 + 20 : 100 + 10; |
| } |
| |
| static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd, |
| struct cfg80211_scan_request *req) |
| { |
| u16 passive_dwell = iwl_mvm_get_passive_dwell(req->channels[0]->band); |
| u16 active_dwell = iwl_mvm_get_active_dwell(req->channels[0]->band, |
| req->n_ssids); |
| struct iwl_scan_channel *chan = (struct iwl_scan_channel *) |
| (cmd->data + le16_to_cpu(cmd->tx_cmd.len)); |
| int i; |
| |
| for (i = 0; i < cmd->channel_count; i++) { |
| chan->channel = cpu_to_le16(req->channels[i]->hw_value); |
| chan->type = cpu_to_le32(BIT(req->n_ssids) - 1); |
| if (req->channels[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN) |
| chan->type &= cpu_to_le32(~SCAN_CHANNEL_TYPE_ACTIVE); |
| chan->active_dwell = cpu_to_le16(active_dwell); |
| chan->passive_dwell = cpu_to_le16(passive_dwell); |
| chan->iteration_count = cpu_to_le16(1); |
| chan++; |
| } |
| } |
| |
| /* |
| * Fill in probe request with the following parameters: |
| * TA is our vif HW address, which mac80211 ensures we have. |
| * Packet is broadcasted, so this is both SA and DA. |
| * The probe request IE is made out of two: first comes the most prioritized |
| * SSID if a directed scan is requested. Second comes whatever extra |
| * information was given to us as the scan request IE. |
| */ |
| static u16 iwl_mvm_fill_probe_req(struct ieee80211_mgmt *frame, const u8 *ta, |
| int n_ssids, const u8 *ssid, int ssid_len, |
| const u8 *ie, int ie_len, |
| int left) |
| { |
| int len = 0; |
| u8 *pos = NULL; |
| |
| /* Make sure there is enough space for the probe request, |
| * two mandatory IEs and the data */ |
| left -= 24; |
| if (left < 0) |
| return 0; |
| |
| frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); |
| eth_broadcast_addr(frame->da); |
| memcpy(frame->sa, ta, ETH_ALEN); |
| eth_broadcast_addr(frame->bssid); |
| frame->seq_ctrl = 0; |
| |
| len += 24; |
| |
| /* for passive scans, no need to fill anything */ |
| if (n_ssids == 0) |
| return (u16)len; |
| |
| /* points to the payload of the request */ |
| pos = &frame->u.probe_req.variable[0]; |
| |
| /* fill in our SSID IE */ |
| left -= ssid_len + 2; |
| if (left < 0) |
| return 0; |
| *pos++ = WLAN_EID_SSID; |
| *pos++ = ssid_len; |
| if (ssid && ssid_len) { /* ssid_len may be == 0 even if ssid is valid */ |
| memcpy(pos, ssid, ssid_len); |
| pos += ssid_len; |
| } |
| |
| len += ssid_len + 2; |
| |
| if (WARN_ON(left < ie_len)) |
| return len; |
| |
| if (ie && ie_len) { |
| memcpy(pos, ie, ie_len); |
| len += ie_len; |
| } |
| |
| return (u16)len; |
| } |
| |
| int iwl_mvm_scan_request(struct iwl_mvm *mvm, |
| struct ieee80211_vif *vif, |
| struct cfg80211_scan_request *req) |
| { |
| struct iwl_host_cmd hcmd = { |
| .id = SCAN_REQUEST_CMD, |
| .len = { 0, }, |
| .data = { mvm->scan_cmd, }, |
| .flags = CMD_SYNC, |
| .dataflags = { IWL_HCMD_DFL_NOCOPY, }, |
| }; |
| struct iwl_scan_cmd *cmd = mvm->scan_cmd; |
| int ret; |
| u32 status; |
| int ssid_len = 0; |
| u8 *ssid = NULL; |
| |
| lockdep_assert_held(&mvm->mutex); |
| BUG_ON(mvm->scan_cmd == NULL); |
| |
| IWL_DEBUG_SCAN(mvm, "Handling mac80211 scan request\n"); |
| mvm->scan_status = IWL_MVM_SCAN_OS; |
| memset(cmd, 0, sizeof(struct iwl_scan_cmd) + |
| mvm->fw->ucode_capa.max_probe_length + |
| (MAX_NUM_SCAN_CHANNELS * sizeof(struct iwl_scan_channel))); |
| |
| cmd->channel_count = (u8)req->n_channels; |
| cmd->quiet_time = cpu_to_le16(IWL_ACTIVE_QUIET_TIME); |
| cmd->quiet_plcp_th = cpu_to_le16(IWL_PLCP_QUIET_THRESH); |
| cmd->rxchain_sel_flags = iwl_mvm_scan_rx_chain(mvm); |
| cmd->max_out_time = iwl_mvm_scan_max_out_time(vif); |
| cmd->suspend_time = iwl_mvm_scan_suspend_time(vif); |
| cmd->rxon_flags = iwl_mvm_scan_rxon_flags(req); |
| cmd->filter_flags = cpu_to_le32(MAC_FILTER_ACCEPT_GRP | |
| MAC_FILTER_IN_BEACON); |
| |
| if (vif->type == NL80211_IFTYPE_P2P_DEVICE) |
| cmd->type = cpu_to_le32(SCAN_TYPE_DISCOVERY_FORCED); |
| else |
| cmd->type = cpu_to_le32(SCAN_TYPE_FORCED); |
| |
| cmd->repeats = cpu_to_le32(1); |
| |
| /* |
| * If the user asked for passive scan, don't change to active scan if |
| * you see any activity on the channel - remain passive. |
| */ |
| if (req->n_ssids > 0) { |
| cmd->passive2active = cpu_to_le16(1); |
| ssid = req->ssids[0].ssid; |
| ssid_len = req->ssids[0].ssid_len; |
| } else { |
| cmd->passive2active = 0; |
| } |
| |
| iwl_mvm_scan_fill_ssids(cmd, req); |
| |
| cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL); |
| cmd->tx_cmd.sta_id = mvm->aux_sta.sta_id; |
| cmd->tx_cmd.life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE); |
| cmd->tx_cmd.rate_n_flags = |
| iwl_mvm_scan_rate_n_flags(mvm, req->channels[0]->band, |
| req->no_cck); |
| |
| cmd->tx_cmd.len = |
| cpu_to_le16(iwl_mvm_fill_probe_req( |
| (struct ieee80211_mgmt *)cmd->data, |
| vif->addr, |
| req->n_ssids, ssid, ssid_len, |
| req->ie, req->ie_len, |
| mvm->fw->ucode_capa.max_probe_length)); |
| |
| iwl_mvm_scan_fill_channels(cmd, req); |
| |
| cmd->len = cpu_to_le16(sizeof(struct iwl_scan_cmd) + |
| le16_to_cpu(cmd->tx_cmd.len) + |
| (cmd->channel_count * sizeof(struct iwl_scan_channel))); |
| hcmd.len[0] = le16_to_cpu(cmd->len); |
| |
| status = SCAN_RESPONSE_OK; |
| ret = iwl_mvm_send_cmd_status(mvm, &hcmd, &status); |
| if (!ret && status == SCAN_RESPONSE_OK) { |
| IWL_DEBUG_SCAN(mvm, "Scan request was sent successfully\n"); |
| } else { |
| /* |
| * If the scan failed, it usually means that the FW was unable |
| * to allocate the time events. Warn on it, but maybe we |
| * should try to send the command again with different params. |
| */ |
| IWL_ERR(mvm, "Scan failed! status 0x%x ret %d\n", |
| status, ret); |
| mvm->scan_status = IWL_MVM_SCAN_NONE; |
| ret = -EIO; |
| } |
| return ret; |
| } |
| |
| int iwl_mvm_rx_scan_response(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, |
| struct iwl_device_cmd *cmd) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| struct iwl_cmd_response *resp = (void *)pkt->data; |
| |
| IWL_DEBUG_SCAN(mvm, "Scan response received. status 0x%x\n", |
| le32_to_cpu(resp->status)); |
| return 0; |
| } |
| |
| int iwl_mvm_rx_scan_complete(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, |
| struct iwl_device_cmd *cmd) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| struct iwl_scan_complete_notif *notif = (void *)pkt->data; |
| |
| IWL_DEBUG_SCAN(mvm, "Scan complete: status=0x%x scanned channels=%d\n", |
| notif->status, notif->scanned_channels); |
| |
| mvm->scan_status = IWL_MVM_SCAN_NONE; |
| ieee80211_scan_completed(mvm->hw, notif->status != SCAN_COMP_STATUS_OK); |
| |
| return 0; |
| } |
| |
| static bool iwl_mvm_scan_abort_notif(struct iwl_notif_wait_data *notif_wait, |
| struct iwl_rx_packet *pkt, void *data) |
| { |
| struct iwl_mvm *mvm = |
| container_of(notif_wait, struct iwl_mvm, notif_wait); |
| struct iwl_scan_complete_notif *notif; |
| u32 *resp; |
| |
| switch (pkt->hdr.cmd) { |
| case SCAN_ABORT_CMD: |
| resp = (void *)pkt->data; |
| if (*resp == CAN_ABORT_STATUS) { |
| IWL_DEBUG_SCAN(mvm, |
| "Scan can be aborted, wait until completion\n"); |
| return false; |
| } |
| |
| IWL_DEBUG_SCAN(mvm, "Scan cannot be aborted, exit now: %d\n", |
| *resp); |
| return true; |
| |
| case SCAN_COMPLETE_NOTIFICATION: |
| notif = (void *)pkt->data; |
| IWL_DEBUG_SCAN(mvm, "Scan aborted: status 0x%x\n", |
| notif->status); |
| return true; |
| |
| default: |
| WARN_ON(1); |
| return false; |
| }; |
| } |
| |
| void iwl_mvm_cancel_scan(struct iwl_mvm *mvm) |
| { |
| struct iwl_notification_wait wait_scan_abort; |
| static const u8 scan_abort_notif[] = { SCAN_ABORT_CMD, |
| SCAN_COMPLETE_NOTIFICATION }; |
| int ret; |
| |
| iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_abort, |
| scan_abort_notif, |
| ARRAY_SIZE(scan_abort_notif), |
| iwl_mvm_scan_abort_notif, NULL); |
| |
| ret = iwl_mvm_send_cmd_pdu(mvm, SCAN_ABORT_CMD, CMD_SYNC, 0, NULL); |
| if (ret) { |
| IWL_ERR(mvm, "Couldn't send SCAN_ABORT_CMD: %d\n", ret); |
| goto out_remove_notif; |
| } |
| |
| ret = iwl_wait_notification(&mvm->notif_wait, &wait_scan_abort, 1 * HZ); |
| if (ret) |
| IWL_ERR(mvm, "%s - failed on timeout\n", __func__); |
| |
| return; |
| |
| out_remove_notif: |
| iwl_remove_notification(&mvm->notif_wait, &wait_scan_abort); |
| } |