| /* |
| * sata_via.c - VIA Serial ATA controllers |
| * |
| * Maintained by: Jeff Garzik <jgarzik@pobox.com> |
| * Please ALWAYS copy linux-ide@vger.kernel.org |
| on emails. |
| * |
| * Copyright 2003-2004 Red Hat, Inc. All rights reserved. |
| * Copyright 2003-2004 Jeff Garzik |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; see the file COPYING. If not, write to |
| * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * |
| * libata documentation is available via 'make {ps|pdf}docs', |
| * as Documentation/DocBook/libata.* |
| * |
| * Hardware documentation available under NDA. |
| * |
| * |
| * To-do list: |
| * - VT6421 PATA support |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <scsi/scsi_host.h> |
| #include <linux/libata.h> |
| |
| #define DRV_NAME "sata_via" |
| #define DRV_VERSION "2.0" |
| |
| enum board_ids_enum { |
| vt6420, |
| vt6421, |
| }; |
| |
| enum { |
| SATA_CHAN_ENAB = 0x40, /* SATA channel enable */ |
| SATA_INT_GATE = 0x41, /* SATA interrupt gating */ |
| SATA_NATIVE_MODE = 0x42, /* Native mode enable */ |
| SATA_PATA_SHARING = 0x49, /* PATA/SATA sharing func ctrl */ |
| PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */ |
| PATA_PIO_TIMING = 0xAB, /* PATA timing register */ |
| |
| PORT0 = (1 << 1), |
| PORT1 = (1 << 0), |
| ALL_PORTS = PORT0 | PORT1, |
| PATA_PORT = 2, /* PATA is port 2 */ |
| N_PORTS = 3, |
| |
| NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4), |
| |
| SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */ |
| SATA_2DEV = (1 << 5), /* SATA is master/slave */ |
| }; |
| |
| static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); |
| static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg); |
| static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); |
| static void svia_noop_freeze(struct ata_port *ap); |
| static void vt6420_error_handler(struct ata_port *ap); |
| static void vt6421_sata_error_handler(struct ata_port *ap); |
| static void vt6421_pata_error_handler(struct ata_port *ap); |
| static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev); |
| static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev); |
| static int vt6421_port_start(struct ata_port *ap); |
| |
| static const struct pci_device_id svia_pci_tbl[] = { |
| { PCI_VDEVICE(VIA, 0x5337), vt6420 }, |
| { PCI_VDEVICE(VIA, 0x0591), vt6420 }, |
| { PCI_VDEVICE(VIA, 0x3149), vt6420 }, |
| { PCI_VDEVICE(VIA, 0x3249), vt6421 }, |
| |
| { } /* terminate list */ |
| }; |
| |
| static struct pci_driver svia_pci_driver = { |
| .name = DRV_NAME, |
| .id_table = svia_pci_tbl, |
| .probe = svia_init_one, |
| .remove = ata_pci_remove_one, |
| }; |
| |
| static struct scsi_host_template svia_sht = { |
| .module = THIS_MODULE, |
| .name = DRV_NAME, |
| .ioctl = ata_scsi_ioctl, |
| .queuecommand = ata_scsi_queuecmd, |
| .can_queue = ATA_DEF_QUEUE, |
| .this_id = ATA_SHT_THIS_ID, |
| .sg_tablesize = LIBATA_MAX_PRD, |
| .cmd_per_lun = ATA_SHT_CMD_PER_LUN, |
| .emulated = ATA_SHT_EMULATED, |
| .use_clustering = ATA_SHT_USE_CLUSTERING, |
| .proc_name = DRV_NAME, |
| .dma_boundary = ATA_DMA_BOUNDARY, |
| .slave_configure = ata_scsi_slave_config, |
| .slave_destroy = ata_scsi_slave_destroy, |
| .bios_param = ata_std_bios_param, |
| }; |
| |
| static const struct ata_port_operations vt6420_sata_ops = { |
| .port_disable = ata_port_disable, |
| |
| .tf_load = ata_tf_load, |
| .tf_read = ata_tf_read, |
| .check_status = ata_check_status, |
| .exec_command = ata_exec_command, |
| .dev_select = ata_std_dev_select, |
| |
| .bmdma_setup = ata_bmdma_setup, |
| .bmdma_start = ata_bmdma_start, |
| .bmdma_stop = ata_bmdma_stop, |
| .bmdma_status = ata_bmdma_status, |
| |
| .qc_prep = ata_qc_prep, |
| .qc_issue = ata_qc_issue_prot, |
| .data_xfer = ata_data_xfer, |
| |
| .freeze = svia_noop_freeze, |
| .thaw = ata_bmdma_thaw, |
| .error_handler = vt6420_error_handler, |
| .post_internal_cmd = ata_bmdma_post_internal_cmd, |
| |
| .irq_handler = ata_interrupt, |
| .irq_clear = ata_bmdma_irq_clear, |
| .irq_on = ata_irq_on, |
| .irq_ack = ata_irq_ack, |
| |
| .port_start = ata_port_start, |
| }; |
| |
| static const struct ata_port_operations vt6421_pata_ops = { |
| .port_disable = ata_port_disable, |
| |
| .set_piomode = vt6421_set_pio_mode, |
| .set_dmamode = vt6421_set_dma_mode, |
| |
| .tf_load = ata_tf_load, |
| .tf_read = ata_tf_read, |
| .check_status = ata_check_status, |
| .exec_command = ata_exec_command, |
| .dev_select = ata_std_dev_select, |
| |
| .bmdma_setup = ata_bmdma_setup, |
| .bmdma_start = ata_bmdma_start, |
| .bmdma_stop = ata_bmdma_stop, |
| .bmdma_status = ata_bmdma_status, |
| |
| .qc_prep = ata_qc_prep, |
| .qc_issue = ata_qc_issue_prot, |
| .data_xfer = ata_data_xfer, |
| |
| .freeze = ata_bmdma_freeze, |
| .thaw = ata_bmdma_thaw, |
| .error_handler = vt6421_pata_error_handler, |
| .post_internal_cmd = ata_bmdma_post_internal_cmd, |
| |
| .irq_handler = ata_interrupt, |
| .irq_clear = ata_bmdma_irq_clear, |
| .irq_on = ata_irq_on, |
| .irq_ack = ata_irq_ack, |
| |
| .port_start = vt6421_port_start, |
| }; |
| |
| static const struct ata_port_operations vt6421_sata_ops = { |
| .port_disable = ata_port_disable, |
| |
| .tf_load = ata_tf_load, |
| .tf_read = ata_tf_read, |
| .check_status = ata_check_status, |
| .exec_command = ata_exec_command, |
| .dev_select = ata_std_dev_select, |
| |
| .bmdma_setup = ata_bmdma_setup, |
| .bmdma_start = ata_bmdma_start, |
| .bmdma_stop = ata_bmdma_stop, |
| .bmdma_status = ata_bmdma_status, |
| |
| .qc_prep = ata_qc_prep, |
| .qc_issue = ata_qc_issue_prot, |
| .data_xfer = ata_data_xfer, |
| |
| .freeze = ata_bmdma_freeze, |
| .thaw = ata_bmdma_thaw, |
| .error_handler = vt6421_sata_error_handler, |
| .post_internal_cmd = ata_bmdma_post_internal_cmd, |
| |
| .irq_handler = ata_interrupt, |
| .irq_clear = ata_bmdma_irq_clear, |
| .irq_on = ata_irq_on, |
| .irq_ack = ata_irq_ack, |
| |
| .scr_read = svia_scr_read, |
| .scr_write = svia_scr_write, |
| |
| .port_start = vt6421_port_start, |
| }; |
| |
| static struct ata_port_info vt6420_port_info = { |
| .sht = &svia_sht, |
| .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, |
| .pio_mask = 0x1f, |
| .mwdma_mask = 0x07, |
| .udma_mask = 0x7f, |
| .port_ops = &vt6420_sata_ops, |
| }; |
| |
| MODULE_AUTHOR("Jeff Garzik"); |
| MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DEVICE_TABLE(pci, svia_pci_tbl); |
| MODULE_VERSION(DRV_VERSION); |
| |
| static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg) |
| { |
| if (sc_reg > SCR_CONTROL) |
| return 0xffffffffU; |
| return ioread32(ap->ioaddr.scr_addr + (4 * sc_reg)); |
| } |
| |
| static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) |
| { |
| if (sc_reg > SCR_CONTROL) |
| return; |
| iowrite32(val, ap->ioaddr.scr_addr + (4 * sc_reg)); |
| } |
| |
| static void svia_noop_freeze(struct ata_port *ap) |
| { |
| /* Some VIA controllers choke if ATA_NIEN is manipulated in |
| * certain way. Leave it alone and just clear pending IRQ. |
| */ |
| ata_chk_status(ap); |
| ata_bmdma_irq_clear(ap); |
| } |
| |
| /** |
| * vt6420_prereset - prereset for vt6420 |
| * @ap: target ATA port |
| * |
| * SCR registers on vt6420 are pieces of shit and may hang the |
| * whole machine completely if accessed with the wrong timing. |
| * To avoid such catastrophe, vt6420 doesn't provide generic SCR |
| * access operations, but uses SStatus and SControl only during |
| * boot probing in controlled way. |
| * |
| * As the old (pre EH update) probing code is proven to work, we |
| * strictly follow the access pattern. |
| * |
| * LOCKING: |
| * Kernel thread context (may sleep) |
| * |
| * RETURNS: |
| * 0 on success, -errno otherwise. |
| */ |
| static int vt6420_prereset(struct ata_port *ap) |
| { |
| struct ata_eh_context *ehc = &ap->eh_context; |
| unsigned long timeout = jiffies + (HZ * 5); |
| u32 sstatus, scontrol; |
| int online; |
| |
| /* don't do any SCR stuff if we're not loading */ |
| if (!(ap->pflags & ATA_PFLAG_LOADING)) |
| goto skip_scr; |
| |
| /* Resume phy. This is the old resume sequence from |
| * __sata_phy_reset(). |
| */ |
| svia_scr_write(ap, SCR_CONTROL, 0x300); |
| svia_scr_read(ap, SCR_CONTROL); /* flush */ |
| |
| /* wait for phy to become ready, if necessary */ |
| do { |
| msleep(200); |
| if ((svia_scr_read(ap, SCR_STATUS) & 0xf) != 1) |
| break; |
| } while (time_before(jiffies, timeout)); |
| |
| /* open code sata_print_link_status() */ |
| sstatus = svia_scr_read(ap, SCR_STATUS); |
| scontrol = svia_scr_read(ap, SCR_CONTROL); |
| |
| online = (sstatus & 0xf) == 0x3; |
| |
| ata_port_printk(ap, KERN_INFO, |
| "SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n", |
| online ? "up" : "down", sstatus, scontrol); |
| |
| /* SStatus is read one more time */ |
| svia_scr_read(ap, SCR_STATUS); |
| |
| if (!online) { |
| /* tell EH to bail */ |
| ehc->i.action &= ~ATA_EH_RESET_MASK; |
| return 0; |
| } |
| |
| skip_scr: |
| /* wait for !BSY */ |
| ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); |
| |
| return 0; |
| } |
| |
| static void vt6420_error_handler(struct ata_port *ap) |
| { |
| return ata_bmdma_drive_eh(ap, vt6420_prereset, ata_std_softreset, |
| NULL, ata_std_postreset); |
| } |
| |
| static int vt6421_pata_prereset(struct ata_port *ap) |
| { |
| struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
| u8 tmp; |
| |
| pci_read_config_byte(pdev, PATA_UDMA_TIMING, &tmp); |
| if (tmp & 0x10) |
| ap->cbl = ATA_CBL_PATA40; |
| else |
| ap->cbl = ATA_CBL_PATA80; |
| return 0; |
| } |
| |
| static void vt6421_pata_error_handler(struct ata_port *ap) |
| { |
| return ata_bmdma_drive_eh(ap, vt6421_pata_prereset, ata_std_softreset, |
| NULL, ata_std_postreset); |
| } |
| |
| static int vt6421_sata_prereset(struct ata_port *ap) |
| { |
| ap->cbl = ATA_CBL_SATA; |
| return 0; |
| } |
| |
| static void vt6421_sata_error_handler(struct ata_port *ap) |
| { |
| return ata_bmdma_drive_eh(ap, vt6421_sata_prereset, ata_std_softreset, |
| NULL, ata_std_postreset); |
| } |
| |
| static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev) |
| { |
| struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
| static const u8 pio_bits[] = { 0xA8, 0x65, 0x65, 0x31, 0x20 }; |
| pci_write_config_byte(pdev, PATA_PIO_TIMING, pio_bits[adev->pio_mode - XFER_PIO_0]); |
| } |
| |
| static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev) |
| { |
| struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
| static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 }; |
| pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->pio_mode - XFER_UDMA_0]); |
| } |
| |
| static int vt6421_port_start(struct ata_port *ap) |
| { |
| if (ap->port_no == PATA_PORT) { |
| ap->ops = &vt6421_pata_ops; |
| ap->mwdma_mask = 0; |
| ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST; |
| } |
| return ata_port_start(ap); |
| } |
| |
| static const unsigned int svia_bar_sizes[] = { |
| 8, 4, 8, 4, 16, 256 |
| }; |
| |
| static const unsigned int vt6421_bar_sizes[] = { |
| 16, 16, 16, 16, 32, 128 |
| }; |
| |
| static void __iomem * svia_scr_addr(void __iomem *addr, unsigned int port) |
| { |
| return addr + (port * 128); |
| } |
| |
| static void __iomem * vt6421_scr_addr(void __iomem *addr, unsigned int port) |
| { |
| return addr + (port * 64); |
| } |
| |
| static void vt6421_init_addrs(struct ata_probe_ent *probe_ent, |
| void __iomem * const *iomap, unsigned int port) |
| { |
| void __iomem *reg_addr = iomap[port]; |
| void __iomem *bmdma_addr = iomap[4] + (port * 8); |
| |
| probe_ent->port[port].cmd_addr = reg_addr; |
| probe_ent->port[port].altstatus_addr = |
| probe_ent->port[port].ctl_addr = (void __iomem *) |
| ((unsigned long)(reg_addr + 8) | ATA_PCI_CTL_OFS); |
| probe_ent->port[port].bmdma_addr = bmdma_addr; |
| probe_ent->port[port].scr_addr = vt6421_scr_addr(iomap[5], port); |
| |
| ata_std_ports(&probe_ent->port[port]); |
| } |
| |
| static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) |
| { |
| struct ata_probe_ent *probe_ent; |
| struct ata_port_info *ppi[2]; |
| void __iomem * const *iomap; |
| |
| ppi[0] = ppi[1] = &vt6420_port_info; |
| probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); |
| if (!probe_ent) |
| return NULL; |
| |
| iomap = pcim_iomap_table(pdev); |
| probe_ent->port[0].scr_addr = svia_scr_addr(iomap[5], 0); |
| probe_ent->port[1].scr_addr = svia_scr_addr(iomap[5], 1); |
| |
| return probe_ent; |
| } |
| |
| static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev) |
| { |
| struct ata_probe_ent *probe_ent; |
| unsigned int i; |
| |
| probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL); |
| if (!probe_ent) |
| return NULL; |
| |
| memset(probe_ent, 0, sizeof(*probe_ent)); |
| probe_ent->dev = pci_dev_to_dev(pdev); |
| INIT_LIST_HEAD(&probe_ent->node); |
| |
| probe_ent->sht = &svia_sht; |
| probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY; |
| probe_ent->port_ops = &vt6421_sata_ops; |
| probe_ent->n_ports = N_PORTS; |
| probe_ent->irq = pdev->irq; |
| probe_ent->irq_flags = IRQF_SHARED; |
| probe_ent->pio_mask = 0x1f; |
| probe_ent->mwdma_mask = 0x07; |
| probe_ent->udma_mask = 0x7f; |
| |
| for (i = 0; i < N_PORTS; i++) |
| vt6421_init_addrs(probe_ent, pcim_iomap_table(pdev), i); |
| |
| return probe_ent; |
| } |
| |
| static void svia_configure(struct pci_dev *pdev) |
| { |
| u8 tmp8; |
| |
| pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8); |
| dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n", |
| (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f); |
| |
| /* make sure SATA channels are enabled */ |
| pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8); |
| if ((tmp8 & ALL_PORTS) != ALL_PORTS) { |
| dev_printk(KERN_DEBUG, &pdev->dev, |
| "enabling SATA channels (0x%x)\n", |
| (int) tmp8); |
| tmp8 |= ALL_PORTS; |
| pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8); |
| } |
| |
| /* make sure interrupts for each channel sent to us */ |
| pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8); |
| if ((tmp8 & ALL_PORTS) != ALL_PORTS) { |
| dev_printk(KERN_DEBUG, &pdev->dev, |
| "enabling SATA channel interrupts (0x%x)\n", |
| (int) tmp8); |
| tmp8 |= ALL_PORTS; |
| pci_write_config_byte(pdev, SATA_INT_GATE, tmp8); |
| } |
| |
| /* make sure native mode is enabled */ |
| pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8); |
| if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) { |
| dev_printk(KERN_DEBUG, &pdev->dev, |
| "enabling SATA channel native mode (0x%x)\n", |
| (int) tmp8); |
| tmp8 |= NATIVE_MODE_ALL; |
| pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); |
| } |
| } |
| |
| static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| static int printed_version; |
| unsigned int i; |
| int rc; |
| struct ata_probe_ent *probe_ent; |
| int board_id = (int) ent->driver_data; |
| const int *bar_sizes; |
| u8 tmp8; |
| |
| if (!printed_version++) |
| dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); |
| |
| rc = pcim_enable_device(pdev); |
| if (rc) |
| return rc; |
| |
| rc = pcim_iomap_regions(pdev, 0x1f, DRV_NAME); |
| if (rc) { |
| pcim_pin_device(pdev); |
| return rc; |
| } |
| |
| if (board_id == vt6420) { |
| pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8); |
| if (tmp8 & SATA_2DEV) { |
| dev_printk(KERN_ERR, &pdev->dev, |
| "SATA master/slave not supported (0x%x)\n", |
| (int) tmp8); |
| return -EIO; |
| } |
| |
| bar_sizes = &svia_bar_sizes[0]; |
| } else { |
| bar_sizes = &vt6421_bar_sizes[0]; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) |
| if ((pci_resource_start(pdev, i) == 0) || |
| (pci_resource_len(pdev, i) < bar_sizes[i])) { |
| dev_printk(KERN_ERR, &pdev->dev, |
| "invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n", |
| i, |
| (unsigned long long)pci_resource_start(pdev, i), |
| (unsigned long long)pci_resource_len(pdev, i)); |
| return -ENODEV; |
| } |
| |
| rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); |
| if (rc) |
| return rc; |
| rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); |
| if (rc) |
| return rc; |
| |
| if (board_id == vt6420) |
| probe_ent = vt6420_init_probe_ent(pdev); |
| else |
| probe_ent = vt6421_init_probe_ent(pdev); |
| |
| if (!probe_ent) { |
| dev_printk(KERN_ERR, &pdev->dev, "out of memory\n"); |
| return -ENOMEM; |
| } |
| |
| svia_configure(pdev); |
| |
| pci_set_master(pdev); |
| |
| if (!ata_device_add(probe_ent)) |
| return -ENODEV; |
| |
| devm_kfree(&pdev->dev, probe_ent); |
| return 0; |
| } |
| |
| static int __init svia_init(void) |
| { |
| return pci_register_driver(&svia_pci_driver); |
| } |
| |
| static void __exit svia_exit(void) |
| { |
| pci_unregister_driver(&svia_pci_driver); |
| } |
| |
| module_init(svia_init); |
| module_exit(svia_exit); |