| /* Copyright (c) 2016-2017, Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/of.h> |
| #include <linux/irq.h> |
| #include <linux/of_irq.h> |
| #include <linux/debugfs.h> |
| #include <linux/seq_file.h> |
| #include <linux/sched.h> |
| #include <linux/wait.h> |
| #include "usbpd.h" |
| |
| #define USB_PDPHY_MAX_DATA_OBJ_LEN 28 |
| #define USB_PDPHY_MSG_HDR_LEN 2 |
| |
| /* PD PHY register offsets and bit fields */ |
| #define USB_PDPHY_MSG_CONFIG 0x40 |
| #define MSG_CONFIG_PORT_DATA_ROLE BIT(3) |
| #define MSG_CONFIG_PORT_POWER_ROLE BIT(2) |
| #define MSG_CONFIG_SPEC_REV_MASK (BIT(1) | BIT(0)) |
| |
| #define USB_PDPHY_EN_CONTROL 0x46 |
| #define CONTROL_ENABLE BIT(0) |
| |
| #define USB_PDPHY_RX_STATUS 0x4A |
| #define RX_FRAME_TYPE (BIT(0) | BIT(1) | BIT(2)) |
| |
| #define USB_PDPHY_FRAME_FILTER 0x4C |
| #define FRAME_FILTER_EN_HARD_RESET BIT(5) |
| #define FRAME_FILTER_EN_SOP BIT(0) |
| |
| #define USB_PDPHY_TX_SIZE 0x42 |
| #define TX_SIZE_MASK 0xF |
| |
| #define USB_PDPHY_TX_CONTROL 0x44 |
| #define TX_CONTROL_RETRY_COUNT (BIT(6) | BIT(5)) |
| #define TX_CONTROL_FRAME_TYPE (BIT(4) | BIT(3) | BIT(2)) |
| #define TX_CONTROL_FRAME_TYPE_CABLE_RESET (0x1 << 2) |
| #define TX_CONTROL_SEND_SIGNAL BIT(1) |
| #define TX_CONTROL_SEND_MSG BIT(0) |
| |
| #define USB_PDPHY_RX_SIZE 0x48 |
| |
| #define USB_PDPHY_RX_ACKNOWLEDGE 0x4B |
| #define RX_BUFFER_TOKEN BIT(0) |
| |
| #define USB_PDPHY_BIST_MODE 0x4E |
| #define BIST_MODE_MASK 0xF |
| #define BIST_ENABLE BIT(7) |
| #define PD_MSG_BIST 0x3 |
| #define PD_BIST_TEST_DATA_MODE 0x8 |
| |
| #define USB_PDPHY_TX_BUFFER_HDR 0x60 |
| #define USB_PDPHY_TX_BUFFER_DATA 0x62 |
| |
| #define USB_PDPHY_RX_BUFFER 0x80 |
| |
| #define USB_PDPHY_SEC_ACCESS 0xD0 |
| #define USB_PDPHY_TRIM_3 0xF3 |
| |
| /* VDD regulator */ |
| #define VDD_PDPHY_VOL_MIN 3088000 /* uV */ |
| #define VDD_PDPHY_VOL_MAX 3088000 /* uV */ |
| #define VDD_PDPHY_HPM_LOAD 3000 /* uA */ |
| |
| /* timers */ |
| #define RECEIVER_RESPONSE_TIME 15 /* tReceiverResponse */ |
| #define HARD_RESET_COMPLETE_TIME 5 /* tHardResetComplete */ |
| |
| struct usb_pdphy { |
| struct device *dev; |
| struct regmap *regmap; |
| |
| u16 base; |
| struct regulator *vdd_pdphy; |
| |
| /* irqs */ |
| int sig_tx_irq; |
| int sig_rx_irq; |
| int msg_tx_irq; |
| int msg_rx_irq; |
| int msg_tx_failed_irq; |
| int msg_tx_discarded_irq; |
| int msg_rx_discarded_irq; |
| |
| void (*signal_cb)(struct usbpd *pd, enum pd_sig_type sig); |
| void (*msg_rx_cb)(struct usbpd *pd, enum pd_sop_type sop, |
| u8 *buf, size_t len); |
| void (*shutdown_cb)(struct usbpd *pd); |
| |
| /* write waitq */ |
| wait_queue_head_t tx_waitq; |
| |
| bool is_opened; |
| int tx_status; |
| u8 frame_filter_val; |
| bool in_test_data_mode; |
| |
| enum data_role data_role; |
| enum power_role power_role; |
| |
| struct usbpd *usbpd; |
| |
| /* debug */ |
| struct dentry *debug_root; |
| unsigned int tx_bytes; /* hdr + data */ |
| unsigned int rx_bytes; /* hdr + data */ |
| unsigned int sig_tx_cnt; |
| unsigned int sig_rx_cnt; |
| unsigned int msg_tx_cnt; |
| unsigned int msg_rx_cnt; |
| unsigned int msg_tx_failed_cnt; |
| unsigned int msg_tx_discarded_cnt; |
| unsigned int msg_rx_discarded_cnt; |
| }; |
| |
| static struct usb_pdphy *__pdphy; |
| |
| static int pdphy_dbg_status(struct seq_file *s, void *p) |
| { |
| struct usb_pdphy *pdphy = s->private; |
| |
| seq_printf(s, |
| "PD Phy driver status\n" |
| "==================================================\n"); |
| seq_printf(s, "opened: %10d\n", pdphy->is_opened); |
| seq_printf(s, "tx status: %10d\n", pdphy->tx_status); |
| seq_printf(s, "tx bytes: %10u\n", pdphy->tx_bytes); |
| seq_printf(s, "rx bytes: %10u\n", pdphy->rx_bytes); |
| seq_printf(s, "data role: %10u\n", pdphy->data_role); |
| seq_printf(s, "power role: %10u\n", pdphy->power_role); |
| seq_printf(s, "frame filter: %10u\n", pdphy->frame_filter_val); |
| seq_printf(s, "sig tx cnt: %10u\n", pdphy->sig_tx_cnt); |
| seq_printf(s, "sig rx cnt: %10u\n", pdphy->sig_rx_cnt); |
| seq_printf(s, "msg tx cnt: %10u\n", pdphy->msg_tx_cnt); |
| seq_printf(s, "msg rx cnt: %10u\n", pdphy->msg_rx_cnt); |
| seq_printf(s, "msg tx failed cnt: %10u\n", |
| pdphy->msg_tx_failed_cnt); |
| seq_printf(s, "msg tx discarded cnt: %10u\n", |
| pdphy->msg_tx_discarded_cnt); |
| seq_printf(s, "msg rx discarded cnt: %10u\n", |
| pdphy->msg_rx_discarded_cnt); |
| |
| return 0; |
| } |
| |
| static int pdphy_dbg_status_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, pdphy_dbg_status, inode->i_private); |
| } |
| |
| static const struct file_operations status_ops = { |
| .owner = THIS_MODULE, |
| .open = pdphy_dbg_status_open, |
| .llseek = seq_lseek, |
| .read = seq_read, |
| .release = single_release, |
| }; |
| |
| static void pdphy_create_debugfs_entries(struct usb_pdphy *pdphy) |
| { |
| struct dentry *ent; |
| |
| pdphy->debug_root = debugfs_create_dir("usb-pdphy", NULL); |
| if (!pdphy->debug_root) { |
| dev_warn(pdphy->dev, "Couldn't create debug dir\n"); |
| return; |
| } |
| |
| ent = debugfs_create_file("status", 0400, pdphy->debug_root, pdphy, |
| &status_ops); |
| if (!ent) { |
| dev_warn(pdphy->dev, "Couldn't create status file\n"); |
| debugfs_remove(pdphy->debug_root); |
| } |
| } |
| |
| static int pdphy_enable_power(struct usb_pdphy *pdphy, bool on) |
| { |
| int ret = 0; |
| |
| dev_dbg(pdphy->dev, "%s turn %s regulator.\n", __func__, |
| on ? "on" : "off"); |
| |
| if (!on) |
| goto disable_pdphy_vdd; |
| |
| ret = regulator_set_load(pdphy->vdd_pdphy, VDD_PDPHY_HPM_LOAD); |
| if (ret < 0) { |
| dev_err(pdphy->dev, "Unable to set HPM of vdd_pdphy:%d\n", ret); |
| return ret; |
| } |
| |
| ret = regulator_set_voltage(pdphy->vdd_pdphy, VDD_PDPHY_VOL_MIN, |
| VDD_PDPHY_VOL_MAX); |
| if (ret) { |
| dev_err(pdphy->dev, |
| "set voltage failed for vdd_pdphy:%d\n", ret); |
| goto put_pdphy_vdd_lpm; |
| } |
| |
| ret = regulator_enable(pdphy->vdd_pdphy); |
| if (ret) { |
| dev_err(pdphy->dev, "Unable to enable vdd_pdphy:%d\n", ret); |
| goto unset_pdphy_vdd; |
| } |
| |
| dev_dbg(pdphy->dev, "%s: PD PHY regulator turned ON.\n", __func__); |
| return ret; |
| |
| disable_pdphy_vdd: |
| ret = regulator_disable(pdphy->vdd_pdphy); |
| if (ret) |
| dev_err(pdphy->dev, "Unable to disable vdd_pdphy:%d\n", ret); |
| |
| unset_pdphy_vdd: |
| ret = regulator_set_voltage(pdphy->vdd_pdphy, 0, VDD_PDPHY_VOL_MAX); |
| if (ret) |
| dev_err(pdphy->dev, |
| "Unable to set (0) voltage for vdd_pdphy:%d\n", ret); |
| |
| put_pdphy_vdd_lpm: |
| ret = regulator_set_load(pdphy->vdd_pdphy, 0); |
| if (ret < 0) |
| dev_err(pdphy->dev, "Unable to set (0) HPM of vdd_pdphy\n"); |
| |
| return ret; |
| } |
| |
| void pdphy_enable_irq(struct usb_pdphy *pdphy, bool enable) |
| { |
| if (enable) { |
| enable_irq(pdphy->sig_tx_irq); |
| enable_irq(pdphy->sig_rx_irq); |
| enable_irq_wake(pdphy->sig_rx_irq); |
| enable_irq(pdphy->msg_tx_irq); |
| if (!pdphy->in_test_data_mode) { |
| enable_irq(pdphy->msg_rx_irq); |
| enable_irq_wake(pdphy->msg_rx_irq); |
| } |
| enable_irq(pdphy->msg_tx_failed_irq); |
| enable_irq(pdphy->msg_tx_discarded_irq); |
| enable_irq(pdphy->msg_rx_discarded_irq); |
| return; |
| } |
| |
| disable_irq(pdphy->sig_tx_irq); |
| disable_irq(pdphy->sig_rx_irq); |
| disable_irq_wake(pdphy->sig_rx_irq); |
| disable_irq(pdphy->msg_tx_irq); |
| if (!pdphy->in_test_data_mode) { |
| disable_irq(pdphy->msg_rx_irq); |
| disable_irq_wake(pdphy->msg_rx_irq); |
| } |
| disable_irq(pdphy->msg_tx_failed_irq); |
| disable_irq(pdphy->msg_tx_discarded_irq); |
| disable_irq(pdphy->msg_rx_discarded_irq); |
| } |
| |
| static int pdphy_reg_read(struct usb_pdphy *pdphy, u8 *val, u16 addr, int count) |
| { |
| int ret; |
| |
| ret = regmap_bulk_read(pdphy->regmap, pdphy->base + addr, val, count); |
| if (ret) { |
| dev_err(pdphy->dev, "read failed: addr=0x%04x, ret=%d\n", |
| pdphy->base + addr, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* Write multiple registers to device with block of data */ |
| static int pdphy_bulk_reg_write(struct usb_pdphy *pdphy, u16 addr, |
| const void *val, u8 val_cnt) |
| { |
| int ret; |
| |
| ret = regmap_bulk_write(pdphy->regmap, pdphy->base + addr, |
| val, val_cnt); |
| if (ret) { |
| dev_err(pdphy->dev, "bulk write failed: addr=0x%04x, ret=%d\n", |
| pdphy->base + addr, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* Writes a single byte to the specified register */ |
| static inline int pdphy_reg_write(struct usb_pdphy *pdphy, u16 addr, u8 val) |
| { |
| return pdphy_bulk_reg_write(pdphy, addr, &val, 1); |
| } |
| |
| /* Writes to the specified register limited by the bit mask */ |
| static int pdphy_masked_write(struct usb_pdphy *pdphy, u16 addr, |
| u8 mask, u8 val) |
| { |
| int ret; |
| |
| ret = regmap_update_bits(pdphy->regmap, pdphy->base + addr, mask, val); |
| if (ret) { |
| dev_err(pdphy->dev, "write failed: addr=0x%04x, ret=%d\n", |
| pdphy->base + addr, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int pd_phy_update_roles(enum data_role dr, enum power_role pr) |
| { |
| struct usb_pdphy *pdphy = __pdphy; |
| |
| return pdphy_masked_write(pdphy, USB_PDPHY_MSG_CONFIG, |
| (MSG_CONFIG_PORT_DATA_ROLE | MSG_CONFIG_PORT_POWER_ROLE), |
| ((dr == DR_DFP ? MSG_CONFIG_PORT_DATA_ROLE : 0) | |
| (pr == PR_SRC ? MSG_CONFIG_PORT_POWER_ROLE : 0))); |
| } |
| EXPORT_SYMBOL(pd_phy_update_roles); |
| |
| int pd_phy_open(struct pd_phy_params *params) |
| { |
| int ret; |
| struct usb_pdphy *pdphy = __pdphy; |
| |
| if (!pdphy) { |
| pr_err("%s: pdphy not found\n", __func__); |
| return -ENODEV; |
| } |
| |
| if (pdphy->is_opened) { |
| dev_err(pdphy->dev, "%s: already opened\n", __func__); |
| return -EBUSY; |
| } |
| |
| pdphy->signal_cb = params->signal_cb; |
| pdphy->msg_rx_cb = params->msg_rx_cb; |
| pdphy->shutdown_cb = params->shutdown_cb; |
| pdphy->data_role = params->data_role; |
| pdphy->power_role = params->power_role; |
| pdphy->frame_filter_val = params->frame_filter_val; |
| |
| dev_dbg(pdphy->dev, "%s: DR %x PR %x frame filter val %x\n", __func__, |
| pdphy->data_role, pdphy->power_role, pdphy->frame_filter_val); |
| |
| ret = pdphy_enable_power(pdphy, true); |
| if (ret) |
| return ret; |
| |
| /* update data and power role to be used in GoodCRC generation */ |
| ret = pd_phy_update_roles(pdphy->data_role, pdphy->power_role); |
| if (ret) |
| return ret; |
| |
| /* PD 2.0 phy */ |
| ret = pdphy_masked_write(pdphy, USB_PDPHY_MSG_CONFIG, |
| MSG_CONFIG_SPEC_REV_MASK, USBPD_REV_20); |
| if (ret) |
| return ret; |
| |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_EN_CONTROL, 0); |
| if (ret) |
| return ret; |
| |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_EN_CONTROL, CONTROL_ENABLE); |
| if (ret) |
| return ret; |
| |
| /* update frame filter */ |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_FRAME_FILTER, |
| pdphy->frame_filter_val); |
| if (ret) |
| return ret; |
| |
| /* initialize Rx buffer ownership to PDPHY HW */ |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_RX_ACKNOWLEDGE, 0); |
| if (ret) |
| return ret; |
| |
| pdphy->is_opened = true; |
| pdphy_enable_irq(pdphy, true); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pd_phy_open); |
| |
| int pd_phy_signal(enum pd_sig_type sig) |
| { |
| u8 val; |
| int ret; |
| struct usb_pdphy *pdphy = __pdphy; |
| |
| dev_dbg(pdphy->dev, "%s: type %d\n", __func__, sig); |
| |
| if (!pdphy) { |
| pr_err("%s: pdphy not found\n", __func__); |
| return -ENODEV; |
| } |
| |
| if (!pdphy->is_opened) { |
| dev_dbg(pdphy->dev, "%s: pdphy disabled\n", __func__); |
| return -ENODEV; |
| } |
| |
| pdphy->tx_status = -EINPROGRESS; |
| |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_TX_CONTROL, 0); |
| if (ret) |
| return ret; |
| |
| usleep_range(2, 3); |
| |
| val = (sig == CABLE_RESET_SIG ? TX_CONTROL_FRAME_TYPE_CABLE_RESET : 0) |
| | TX_CONTROL_SEND_SIGNAL; |
| |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_TX_CONTROL, val); |
| if (ret) |
| return ret; |
| |
| ret = wait_event_interruptible_timeout(pdphy->tx_waitq, |
| pdphy->tx_status != -EINPROGRESS, |
| msecs_to_jiffies(HARD_RESET_COMPLETE_TIME)); |
| if (ret <= 0) { |
| dev_err(pdphy->dev, "%s: failed ret %d", __func__, ret); |
| return ret ? ret : -ETIMEDOUT; |
| } |
| |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_TX_CONTROL, 0); |
| |
| if (pdphy->tx_status) |
| return pdphy->tx_status; |
| |
| if (sig == HARD_RESET_SIG) |
| /* Frame filter is reconfigured in pd_phy_open() */ |
| return pdphy_reg_write(pdphy, USB_PDPHY_FRAME_FILTER, 0); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(pd_phy_signal); |
| |
| int pd_phy_write(u16 hdr, const u8 *data, size_t data_len, enum pd_sop_type sop) |
| { |
| u8 val; |
| int ret; |
| size_t total_len = data_len + USB_PDPHY_MSG_HDR_LEN; |
| struct usb_pdphy *pdphy = __pdphy; |
| |
| dev_dbg(pdphy->dev, "%s: hdr %x frame sop_type %d\n", |
| __func__, hdr, sop); |
| |
| if (data && data_len) |
| print_hex_dump_debug("tx data obj:", DUMP_PREFIX_NONE, 32, 4, |
| data, data_len, false); |
| |
| if (!pdphy) { |
| pr_err("%s: pdphy not found\n", __func__); |
| return -ENODEV; |
| } |
| |
| if (!pdphy->is_opened) { |
| dev_dbg(pdphy->dev, "%s: pdphy disabled\n", __func__); |
| return -ENODEV; |
| } |
| |
| if (data_len > USB_PDPHY_MAX_DATA_OBJ_LEN) { |
| dev_err(pdphy->dev, "%s: invalid data object len %zu\n", |
| __func__, data_len); |
| return -EINVAL; |
| } |
| |
| ret = pdphy_reg_read(pdphy, &val, USB_PDPHY_RX_ACKNOWLEDGE, 1); |
| if (ret || val) { |
| dev_err(pdphy->dev, "%s: RX message pending\n", __func__); |
| return -EBUSY; |
| } |
| |
| pdphy->tx_status = -EINPROGRESS; |
| |
| /* write 2 byte SOP message header */ |
| ret = pdphy_bulk_reg_write(pdphy, USB_PDPHY_TX_BUFFER_HDR, (u8 *)&hdr, |
| USB_PDPHY_MSG_HDR_LEN); |
| if (ret) |
| return ret; |
| |
| if (data && data_len) { |
| /* write data objects of SOP message */ |
| ret = pdphy_bulk_reg_write(pdphy, USB_PDPHY_TX_BUFFER_DATA, |
| data, data_len); |
| if (ret) |
| return ret; |
| } |
| |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_TX_SIZE, total_len - 1); |
| if (ret) |
| return ret; |
| |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_TX_CONTROL, 0); |
| if (ret) |
| return ret; |
| |
| usleep_range(2, 3); |
| |
| val = TX_CONTROL_RETRY_COUNT | (sop << 2) | TX_CONTROL_SEND_MSG; |
| |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_TX_CONTROL, val); |
| if (ret) |
| return ret; |
| |
| ret = wait_event_interruptible_timeout(pdphy->tx_waitq, |
| pdphy->tx_status != -EINPROGRESS, |
| msecs_to_jiffies(RECEIVER_RESPONSE_TIME)); |
| if (ret <= 0) { |
| dev_err(pdphy->dev, "%s: failed ret %d", __func__, ret); |
| return ret ? ret : -ETIMEDOUT; |
| } |
| |
| if (hdr && !pdphy->tx_status) |
| pdphy->tx_bytes += data_len + USB_PDPHY_MSG_HDR_LEN; |
| |
| return pdphy->tx_status ? pdphy->tx_status : 0; |
| } |
| EXPORT_SYMBOL(pd_phy_write); |
| |
| void pd_phy_close(void) |
| { |
| int ret; |
| struct usb_pdphy *pdphy = __pdphy; |
| |
| if (!pdphy) { |
| pr_err("%s: pdphy not found\n", __func__); |
| return; |
| } |
| |
| if (!pdphy->is_opened) { |
| dev_err(pdphy->dev, "%s: not opened\n", __func__); |
| return; |
| } |
| |
| pdphy->is_opened = false; |
| pdphy_enable_irq(pdphy, false); |
| |
| pdphy->tx_status = -ESHUTDOWN; |
| |
| wake_up_all(&pdphy->tx_waitq); |
| |
| pdphy_reg_write(pdphy, USB_PDPHY_BIST_MODE, 0); |
| pdphy->in_test_data_mode = false; |
| |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_TX_CONTROL, 0); |
| if (ret) |
| return; |
| |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_EN_CONTROL, 0); |
| if (ret) |
| return; |
| |
| pdphy_enable_power(pdphy, false); |
| } |
| EXPORT_SYMBOL(pd_phy_close); |
| |
| static irqreturn_t pdphy_msg_tx_irq(int irq, void *data) |
| { |
| struct usb_pdphy *pdphy = data; |
| |
| /* TX already aborted by received signal */ |
| if (pdphy->tx_status != -EINPROGRESS) |
| return IRQ_HANDLED; |
| |
| if (irq == pdphy->msg_tx_irq) { |
| pdphy->msg_tx_cnt++; |
| pdphy->tx_status = 0; |
| } else if (irq == pdphy->msg_tx_discarded_irq) { |
| pdphy->msg_tx_discarded_cnt++; |
| pdphy->tx_status = -EBUSY; |
| } else if (irq == pdphy->msg_tx_failed_irq) { |
| pdphy->msg_tx_failed_cnt++; |
| pdphy->tx_status = -EFAULT; |
| } else { |
| dev_err(pdphy->dev, "spurious irq #%d received\n", irq); |
| return IRQ_NONE; |
| } |
| |
| wake_up(&pdphy->tx_waitq); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t pdphy_msg_rx_discarded_irq(int irq, void *data) |
| { |
| struct usb_pdphy *pdphy = data; |
| |
| pdphy->msg_rx_discarded_cnt++; |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t pdphy_sig_rx_irq_thread(int irq, void *data) |
| { |
| u8 rx_status, frame_type; |
| int ret; |
| struct usb_pdphy *pdphy = data; |
| |
| pdphy->sig_rx_cnt++; |
| |
| ret = pdphy_reg_read(pdphy, &rx_status, USB_PDPHY_RX_STATUS, 1); |
| if (ret) |
| goto done; |
| |
| frame_type = rx_status & RX_FRAME_TYPE; |
| if (frame_type != HARD_RESET_SIG) { |
| dev_err(pdphy->dev, "%s:unsupported frame type %d\n", |
| __func__, frame_type); |
| goto done; |
| } |
| |
| /* Frame filter is reconfigured in pd_phy_open() */ |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_FRAME_FILTER, 0); |
| |
| if (pdphy->signal_cb) |
| pdphy->signal_cb(pdphy->usbpd, frame_type); |
| |
| if (pdphy->tx_status == -EINPROGRESS) { |
| pdphy->tx_status = -EBUSY; |
| wake_up(&pdphy->tx_waitq); |
| } |
| done: |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t pdphy_sig_tx_irq_thread(int irq, void *data) |
| { |
| struct usb_pdphy *pdphy = data; |
| |
| /* in case of exit from BIST Carrier Mode 2, clear BIST_MODE */ |
| pdphy_reg_write(pdphy, USB_PDPHY_BIST_MODE, 0); |
| |
| pdphy->sig_tx_cnt++; |
| pdphy->tx_status = 0; |
| wake_up(&pdphy->tx_waitq); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int pd_phy_bist_mode(u8 bist_mode) |
| { |
| struct usb_pdphy *pdphy = __pdphy; |
| |
| dev_dbg(pdphy->dev, "%s: enter BIST mode %d\n", __func__, bist_mode); |
| |
| pdphy_reg_write(pdphy, USB_PDPHY_BIST_MODE, 0); |
| |
| udelay(5); |
| |
| return pdphy_masked_write(pdphy, USB_PDPHY_BIST_MODE, |
| BIST_MODE_MASK | BIST_ENABLE, bist_mode | BIST_ENABLE); |
| } |
| |
| static irqreturn_t pdphy_msg_rx_irq(int irq, void *data) |
| { |
| u8 size, rx_status, frame_type; |
| u8 buf[32]; |
| int ret; |
| struct usb_pdphy *pdphy = data; |
| |
| pdphy->msg_rx_cnt++; |
| |
| ret = pdphy_reg_read(pdphy, &size, USB_PDPHY_RX_SIZE, 1); |
| if (ret) |
| goto done; |
| |
| if (!size || size > 31) { |
| dev_err(pdphy->dev, "%s: invalid size %d\n", __func__, size); |
| goto done; |
| } |
| |
| ret = pdphy_reg_read(pdphy, &rx_status, USB_PDPHY_RX_STATUS, 1); |
| if (ret) |
| goto done; |
| |
| frame_type = rx_status & RX_FRAME_TYPE; |
| if (frame_type != SOP_MSG) { |
| dev_err(pdphy->dev, "%s:unsupported frame type %d\n", |
| __func__, frame_type); |
| goto done; |
| } |
| |
| ret = pdphy_reg_read(pdphy, buf, USB_PDPHY_RX_BUFFER, size + 1); |
| if (ret) |
| goto done; |
| |
| /* ack to change ownership of rx buffer back to PDPHY RX HW */ |
| pdphy_reg_write(pdphy, USB_PDPHY_RX_ACKNOWLEDGE, 0); |
| |
| if (((buf[0] & 0xf) == PD_MSG_BIST) && size >= 5) { /* BIST */ |
| u8 mode = buf[5] >> 4; /* [31:28] of 1st data object */ |
| |
| pd_phy_bist_mode(mode); |
| pdphy_reg_write(pdphy, USB_PDPHY_RX_ACKNOWLEDGE, 0); |
| |
| if (mode == PD_BIST_TEST_DATA_MODE) { |
| pdphy->in_test_data_mode = true; |
| disable_irq_nosync(irq); |
| } |
| goto done; |
| } |
| |
| if (pdphy->msg_rx_cb) |
| pdphy->msg_rx_cb(pdphy->usbpd, frame_type, buf, size + 1); |
| |
| print_hex_dump_debug("rx msg:", DUMP_PREFIX_NONE, 32, 4, buf, size + 1, |
| false); |
| pdphy->rx_bytes += size + 1; |
| done: |
| return IRQ_HANDLED; |
| } |
| |
| static int pdphy_request_irq(struct usb_pdphy *pdphy, |
| struct device_node *node, |
| int *irq_num, const char *irq_name, |
| irqreturn_t (irq_handler)(int irq, void *data), |
| irqreturn_t (thread_fn)(int irq, void *data), |
| int flags) |
| { |
| int ret; |
| |
| *irq_num = of_irq_get_byname(node, irq_name); |
| if (*irq_num < 0) { |
| dev_err(pdphy->dev, "Unable to get %s irqn", irq_name); |
| ret = -ENXIO; |
| } |
| |
| irq_set_status_flags(*irq_num, IRQ_NOAUTOEN); |
| ret = devm_request_threaded_irq(pdphy->dev, *irq_num, irq_handler, |
| thread_fn, flags, irq_name, pdphy); |
| if (ret < 0) { |
| dev_err(pdphy->dev, "Unable to request %s irq: %dn", |
| irq_name, ret); |
| ret = -ENXIO; |
| } |
| |
| return 0; |
| } |
| |
| static int pdphy_probe(struct platform_device *pdev) |
| { |
| int ret; |
| unsigned int base; |
| struct usb_pdphy *pdphy; |
| |
| pdphy = devm_kzalloc(&pdev->dev, sizeof(*pdphy), GFP_KERNEL); |
| if (!pdphy) |
| return -ENOMEM; |
| |
| pdphy->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| if (!pdphy->regmap) { |
| dev_err(&pdev->dev, "Couldn't get parent's regmap\n"); |
| return -EINVAL; |
| } |
| |
| dev_set_drvdata(&pdev->dev, pdphy); |
| |
| ret = of_property_read_u32(pdev->dev.of_node, "reg", &base); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to get reg base address ret = %d\n", |
| ret); |
| return ret; |
| } |
| |
| pdphy->base = base; |
| pdphy->dev = &pdev->dev; |
| |
| init_waitqueue_head(&pdphy->tx_waitq); |
| |
| pdphy->vdd_pdphy = devm_regulator_get(&pdev->dev, "vdd-pdphy"); |
| if (IS_ERR(pdphy->vdd_pdphy)) { |
| dev_err(&pdev->dev, "unable to get vdd-pdphy\n"); |
| return PTR_ERR(pdphy->vdd_pdphy); |
| } |
| |
| ret = pdphy_request_irq(pdphy, pdev->dev.of_node, |
| &pdphy->sig_tx_irq, "sig-tx", NULL, |
| pdphy_sig_tx_irq_thread, (IRQF_TRIGGER_RISING | IRQF_ONESHOT)); |
| if (ret < 0) |
| return ret; |
| |
| ret = pdphy_request_irq(pdphy, pdev->dev.of_node, |
| &pdphy->sig_rx_irq, "sig-rx", NULL, |
| pdphy_sig_rx_irq_thread, (IRQF_TRIGGER_RISING | IRQF_ONESHOT)); |
| if (ret < 0) |
| return ret; |
| |
| ret = pdphy_request_irq(pdphy, pdev->dev.of_node, |
| &pdphy->msg_tx_irq, "msg-tx", pdphy_msg_tx_irq, |
| NULL, (IRQF_TRIGGER_RISING | IRQF_ONESHOT)); |
| if (ret < 0) |
| return ret; |
| |
| ret = pdphy_request_irq(pdphy, pdev->dev.of_node, |
| &pdphy->msg_rx_irq, "msg-rx", pdphy_msg_rx_irq, |
| NULL, (IRQF_TRIGGER_RISING | IRQF_ONESHOT)); |
| if (ret < 0) |
| return ret; |
| |
| ret = pdphy_request_irq(pdphy, pdev->dev.of_node, |
| &pdphy->msg_tx_failed_irq, "msg-tx-failed", pdphy_msg_tx_irq, |
| NULL, (IRQF_TRIGGER_RISING | IRQF_ONESHOT)); |
| if (ret < 0) |
| return ret; |
| |
| ret = pdphy_request_irq(pdphy, pdev->dev.of_node, |
| &pdphy->msg_tx_discarded_irq, "msg-tx-discarded", |
| pdphy_msg_tx_irq, NULL, |
| (IRQF_TRIGGER_RISING | IRQF_ONESHOT)); |
| if (ret < 0) |
| return ret; |
| |
| ret = pdphy_request_irq(pdphy, pdev->dev.of_node, |
| &pdphy->msg_rx_discarded_irq, "msg-rx-discarded", |
| pdphy_msg_rx_discarded_irq, NULL, |
| (IRQF_TRIGGER_RISING | IRQF_ONESHOT)); |
| if (ret < 0) |
| return ret; |
| |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_SEC_ACCESS, 0xA5); |
| if (ret) |
| return ret; |
| |
| ret = pdphy_reg_write(pdphy, USB_PDPHY_TRIM_3, 0x2); |
| if (ret) |
| return ret; |
| |
| /* usbpd_create() could call back to us, so have __pdphy ready */ |
| __pdphy = pdphy; |
| |
| pdphy->usbpd = usbpd_create(&pdev->dev); |
| if (IS_ERR(pdphy->usbpd)) { |
| dev_err(&pdev->dev, "usbpd_create failed: %ld\n", |
| PTR_ERR(pdphy->usbpd)); |
| __pdphy = NULL; |
| return PTR_ERR(pdphy->usbpd); |
| } |
| |
| pdphy_create_debugfs_entries(pdphy); |
| |
| return 0; |
| } |
| |
| static int pdphy_remove(struct platform_device *pdev) |
| { |
| struct usb_pdphy *pdphy = platform_get_drvdata(pdev); |
| |
| debugfs_remove_recursive(pdphy->debug_root); |
| usbpd_destroy(pdphy->usbpd); |
| |
| if (pdphy->is_opened) |
| pd_phy_close(); |
| |
| __pdphy = NULL; |
| |
| return 0; |
| } |
| |
| static void pdphy_shutdown(struct platform_device *pdev) |
| { |
| struct usb_pdphy *pdphy = platform_get_drvdata(pdev); |
| |
| /* let protocol engine shutdown the pdphy synchronously */ |
| if (pdphy->shutdown_cb) |
| pdphy->shutdown_cb(pdphy->usbpd); |
| } |
| |
| static const struct of_device_id pdphy_match_table[] = { |
| { |
| .compatible = "qcom,qpnp-pdphy", |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, pdphy_match_table); |
| |
| static struct platform_driver pdphy_driver = { |
| .driver = { |
| .name = "qpnp-pdphy", |
| .of_match_table = pdphy_match_table, |
| }, |
| .probe = pdphy_probe, |
| .remove = pdphy_remove, |
| .shutdown = pdphy_shutdown, |
| }; |
| |
| module_platform_driver(pdphy_driver); |
| |
| MODULE_DESCRIPTION("QPNP PD PHY Driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:qpnp-pdphy"); |