| /* Copyright (c) 2015-2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #include <linux/module.h> |
| #include <linux/bitops.h> |
| #include <linux/cdev.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/fs.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/uaccess.h> |
| #include <soc/qcom/memory_dump.h> |
| #include <soc/qcom/scm.h> |
| |
| #define TIMEOUT_US (100) |
| |
| #define BM(lsb, msb) ((BIT(msb) - BIT(lsb)) + BIT(msb)) |
| #define BMVAL(val, lsb, msb) ((val & BM(lsb, msb)) >> lsb) |
| #define BVAL(val, n) ((val & BIT(n)) >> n) |
| |
| #define dcc_writel(drvdata, val, off) \ |
| __raw_writel((val), drvdata->base + off) |
| #define dcc_readl(drvdata, off) \ |
| __raw_readl(drvdata->base + off) |
| |
| #define dcc_sram_writel(drvdata, val, off) \ |
| __raw_writel((val), drvdata->ram_base + off) |
| #define dcc_sram_readl(drvdata, off) \ |
| __raw_readl(drvdata->ram_base + off) |
| |
| #define HLOS_LIST_START 1 |
| |
| /* DCC registers */ |
| #define DCC_HW_VERSION (0x00) |
| #define DCC_HW_INFO (0x04) |
| #define DCC_EXEC_CTRL (0x08) |
| #define DCC_STATUS (0x0C) |
| #define DCC_CFG (0x10) |
| #define DCC_FDA_CURR (0x14) |
| #define DCC_LLA_CURR (0x18) |
| #define DCC_LL_LOCK(m) (0x1C + 0x80 * (m + HLOS_LIST_START)) |
| #define DCC_LL_CFG(m) (0x20 + 0x80 * (m + HLOS_LIST_START)) |
| #define DCC_LL_BASE(m) (0x24 + 0x80 * (m + HLOS_LIST_START)) |
| #define DCC_FD_BASE(m) (0x28 + 0x80 * (m + HLOS_LIST_START)) |
| #define DCC_LL_TIMEOUT(m) (0x2c + 0x80 * (m + HLOS_LIST_START)) |
| #define DCC_LL_INT_ENABLE(m) (0x30 + 0x80 * (m + HLOS_LIST_START)) |
| #define DCC_LL_INT_STATUS(m) (0x34 + 0x80 * (m + HLOS_LIST_START)) |
| #define DCC_FDA_CAPTURED(m) (0x38 + 0x80 * (m + HLOS_LIST_START)) |
| #define DCC_LLA_CAPTURED(m) (0x3C + 0x80 * (m + HLOS_LIST_START)) |
| #define DCC_LL_CRC_CAPTURED(m) (0x40 + 0x80 * (m + HLOS_LIST_START)) |
| #define DCC_LL_SW_TRIGGER(m) (0x44 + 0x80 * (m + HLOS_LIST_START)) |
| #define DCC_LL_BUS_ACCESS_STATUS(m) (0x48 + 0x80 * (m + HLOS_LIST_START)) |
| |
| #define DCC_REG_DUMP_MAGIC_V2 (0x42445953) |
| #define DCC_REG_DUMP_VER (1) |
| |
| #define MAX_DCC_OFFSET (0xFF * 4) |
| #define MAX_DCC_LEN 0x7F |
| #define MAX_LOOP_CNT 0xFF |
| |
| #define DCC_ADDR_DESCRIPTOR 0x00 |
| #define DCC_LOOP_DESCRIPTOR (BIT(30)) |
| #define DCC_RD_MOD_WR_DESCRIPTOR (BIT(31)) |
| #define DCC_LINK_DESCRIPTOR (BIT(31) | BIT(30)) |
| |
| #define DCC_MAX_LINK_LIST 5 |
| #define DCC_INVALID_LINK_LIST 0xFF |
| |
| enum dcc_func_type { |
| DCC_FUNC_TYPE_CAPTURE, |
| DCC_FUNC_TYPE_CRC, |
| }; |
| |
| static const char * const str_dcc_func_type[] = { |
| [DCC_FUNC_TYPE_CAPTURE] = "cap", |
| [DCC_FUNC_TYPE_CRC] = "crc", |
| }; |
| |
| enum dcc_data_sink { |
| DCC_DATA_SINK_SRAM, |
| DCC_DATA_SINK_ATB |
| }; |
| |
| static const char * const str_dcc_data_sink[] = { |
| [DCC_DATA_SINK_SRAM] = "sram", |
| [DCC_DATA_SINK_ATB] = "atb", |
| }; |
| |
| struct rpm_trig_req { |
| uint32_t enable; |
| uint32_t reserved; |
| }; |
| |
| struct dcc_config_entry { |
| uint32_t base; |
| uint32_t offset; |
| uint32_t len; |
| uint32_t index; |
| uint32_t loop_cnt; |
| uint32_t rd_mod_wr; |
| uint32_t mask; |
| bool rd_wr_entry; |
| struct list_head list; |
| }; |
| |
| struct dcc_drvdata { |
| void __iomem *base; |
| uint32_t reg_size; |
| struct device *dev; |
| struct mutex mutex; |
| void __iomem *ram_base; |
| uint32_t ram_size; |
| uint32_t ram_offset; |
| enum dcc_data_sink data_sink; |
| enum dcc_func_type func_type[DCC_MAX_LINK_LIST]; |
| uint32_t ram_cfg; |
| uint32_t ram_start; |
| bool enable[DCC_MAX_LINK_LIST]; |
| bool configured[DCC_MAX_LINK_LIST]; |
| bool interrupt_disable; |
| char *sram_node; |
| struct cdev sram_dev; |
| struct class *sram_class; |
| struct list_head cfg_head[DCC_MAX_LINK_LIST]; |
| uint32_t nr_config[DCC_MAX_LINK_LIST]; |
| void *reg_buf; |
| struct msm_dump_data reg_data; |
| bool save_reg; |
| void *sram_buf; |
| struct msm_dump_data sram_data; |
| uint8_t curr_list; |
| }; |
| |
| static bool dcc_ready(struct dcc_drvdata *drvdata) |
| { |
| uint32_t val; |
| |
| /* poll until DCC ready */ |
| if (!readl_poll_timeout((drvdata->base + DCC_STATUS), val, |
| (BMVAL(val, 0, 1) == 0), 1, TIMEOUT_US)) |
| return true; |
| |
| return false; |
| } |
| |
| static int dcc_read_status(struct dcc_drvdata *drvdata) |
| { |
| int curr_list; |
| uint32_t bus_status; |
| |
| for (curr_list = 0; curr_list < DCC_MAX_LINK_LIST; curr_list++) { |
| if (!drvdata->enable[curr_list]) |
| continue; |
| |
| bus_status = dcc_readl(drvdata, |
| DCC_LL_BUS_ACCESS_STATUS(curr_list)); |
| |
| if (bus_status) { |
| |
| dev_err(drvdata->dev, |
| "Read access error for list %d err: 0x%x", |
| curr_list, bus_status); |
| |
| dcc_writel(drvdata, 0x3, |
| DCC_LL_BUS_ACCESS_STATUS(curr_list)); |
| return -ENODATA; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int dcc_sw_trigger(struct dcc_drvdata *drvdata) |
| { |
| int ret = 0; |
| int curr_list; |
| |
| mutex_lock(&drvdata->mutex); |
| |
| if (!dcc_ready(drvdata)) { |
| dev_err(drvdata->dev, "DCC is not ready!\n"); |
| ret = -EBUSY; |
| goto err; |
| } |
| |
| for (curr_list = 0; curr_list < DCC_MAX_LINK_LIST; curr_list++) { |
| if (!drvdata->enable[curr_list]) |
| continue; |
| |
| dcc_writel(drvdata, 1, DCC_LL_SW_TRIGGER(curr_list)); |
| } |
| |
| if (!dcc_ready(drvdata)) { |
| dev_err(drvdata->dev, |
| "DCC is busy after receiving sw tigger.\n"); |
| ret = -EBUSY; |
| goto err; |
| } |
| |
| ret = dcc_read_status(drvdata); |
| |
| err: |
| mutex_unlock(&drvdata->mutex); |
| return ret; |
| } |
| |
| static int __dcc_ll_cfg(struct dcc_drvdata *drvdata, int curr_list) |
| { |
| int ret = 0; |
| uint32_t sram_offset = drvdata->ram_cfg * 4; |
| uint32_t prev_addr, addr; |
| uint32_t prev_off = 0, off; |
| uint32_t loop_off = 0; |
| uint32_t link; |
| uint32_t pos, total_len = 0, loop_len = 0; |
| uint32_t loop, loop_cnt; |
| bool loop_start = false; |
| struct dcc_config_entry *entry; |
| |
| prev_addr = 0; |
| addr = 0; |
| link = 0; |
| |
| list_for_each_entry(entry, &drvdata->cfg_head[curr_list], list) { |
| if (entry->rd_wr_entry) { |
| if (link) { |
| /* write new offset = 1 to continue |
| * processing the list |
| */ |
| link |= ((0x1 << 8) & BM(8, 14)); |
| dcc_sram_writel(drvdata, link, sram_offset); |
| sram_offset += 4; |
| /* Reset link and prev_off */ |
| addr = 0x00; |
| link = 0; |
| prev_off = 0; |
| prev_addr = addr; |
| } |
| |
| addr = DCC_RD_MOD_WR_DESCRIPTOR; |
| dcc_sram_writel(drvdata, addr, sram_offset); |
| sram_offset += 4; |
| |
| dcc_sram_writel(drvdata, entry->mask, sram_offset); |
| sram_offset += 4; |
| |
| dcc_sram_writel(drvdata, entry->rd_mod_wr, sram_offset); |
| sram_offset += 4; |
| continue; |
| } |
| |
| if (entry->loop_cnt) { |
| /* Check if we need to write link of prev entry */ |
| if (link) { |
| dcc_sram_writel(drvdata, link, sram_offset); |
| sram_offset += 4; |
| } |
| |
| if (loop_start) { |
| loop = (sram_offset - loop_off) / 4; |
| loop |= (loop_cnt << 13) & BM(13, 27); |
| loop |= DCC_LOOP_DESCRIPTOR; |
| total_len += (total_len - loop_len) * loop_cnt; |
| |
| dcc_sram_writel(drvdata, loop, sram_offset); |
| sram_offset += 4; |
| |
| loop_start = false; |
| loop_len = 0; |
| loop_off = 0; |
| } else { |
| loop_start = true; |
| loop_cnt = entry->loop_cnt - 1; |
| loop_len = total_len; |
| loop_off = sram_offset; |
| } |
| |
| /* Reset link and prev_off */ |
| addr = 0x00; |
| link = 0; |
| prev_off = 0; |
| prev_addr = addr; |
| |
| continue; |
| } |
| |
| /* Address type */ |
| addr = (entry->base >> 4) & BM(0, 27); |
| addr |= DCC_ADDR_DESCRIPTOR; |
| off = entry->offset/4; |
| total_len += entry->len * 4; |
| |
| if (!prev_addr || prev_addr != addr || prev_off > off) { |
| /* Check if we need to write link of prev entry */ |
| if (link) { |
| dcc_sram_writel(drvdata, link, sram_offset); |
| sram_offset += 4; |
| } |
| dev_err(drvdata->dev, |
| "DCC: sram address.%d\n", sram_offset); |
| |
| /* Write address */ |
| dcc_sram_writel(drvdata, addr, sram_offset); |
| sram_offset += 4; |
| |
| /* Reset link and prev_off */ |
| link = 0; |
| prev_off = 0; |
| } |
| |
| if ((off - prev_off) > 0xFF || entry->len > MAX_DCC_LEN) { |
| dev_err(drvdata->dev, |
| "DCC: Progamming error! Base: 0x%x, offset 0x%x.\n", |
| entry->base, entry->offset); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| if (link) { |
| /* |
| * link already has one offset-length so new |
| * offset-length needs to be placed at bits [29:15] |
| */ |
| pos = 15; |
| |
| /* Clear bits [31:16] */ |
| link &= BM(0, 14); |
| } else { |
| /* |
| * link is empty, so new offset-length needs to be |
| * placed at bits [15:0] |
| */ |
| pos = 0; |
| link = 1 << 15; |
| } |
| |
| /* write new offset-length pair to correct position */ |
| link |= (((off-prev_off) & BM(0, 7)) | |
| ((entry->len << 8) & BM(8, 14))) << pos; |
| |
| link |= DCC_LINK_DESCRIPTOR; |
| |
| if (pos) { |
| dcc_sram_writel(drvdata, link, sram_offset); |
| sram_offset += 4; |
| link = 0; |
| } |
| |
| prev_off = off; |
| prev_addr = addr; |
| } |
| |
| if (link) { |
| dcc_sram_writel(drvdata, link, sram_offset); |
| sram_offset += 4; |
| } |
| |
| if (loop_start) { |
| dev_err(drvdata->dev, |
| "DCC: Progamming error! Loop unterminated.\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| /* Handling special case of list ending with a rd_mod_wr */ |
| if (addr == DCC_RD_MOD_WR_DESCRIPTOR) { |
| addr = (0xC105E) & BM(0, 27); |
| addr |= DCC_ADDR_DESCRIPTOR; |
| |
| dcc_sram_writel(drvdata, addr, sram_offset); |
| sram_offset += 4; |
| } |
| |
| /* Setting zero to indicate end of the list */ |
| link = DCC_LINK_DESCRIPTOR; |
| dcc_sram_writel(drvdata, link, sram_offset); |
| sram_offset += 4; |
| |
| /* Update ram_cfg and check if the data will overstep */ |
| if (drvdata->data_sink == DCC_DATA_SINK_SRAM && |
| drvdata->func_type[curr_list] == DCC_FUNC_TYPE_CAPTURE) { |
| drvdata->ram_cfg = (sram_offset + total_len) / 4; |
| |
| if (sram_offset + total_len > drvdata->ram_size) { |
| sram_offset += total_len; |
| goto overstep; |
| } |
| } else { |
| drvdata->ram_cfg = sram_offset / 4; |
| |
| if (sram_offset > drvdata->ram_size) |
| goto overstep; |
| } |
| |
| drvdata->ram_start = sram_offset/4; |
| return 0; |
| overstep: |
| ret = -EINVAL; |
| memset_io(drvdata->ram_base, 0, drvdata->ram_size); |
| dev_err(drvdata->dev, "DCC SRAM oversteps, 0x%x (0x%x)\n", |
| sram_offset, drvdata->ram_size); |
| err: |
| return ret; |
| } |
| |
| static void __dcc_reg_dump(struct dcc_drvdata *drvdata) |
| { |
| uint32_t *reg_buf; |
| uint8_t i = 0; |
| uint8_t j; |
| |
| if (!drvdata->reg_buf) |
| return; |
| |
| drvdata->reg_data.version = DCC_REG_DUMP_VER; |
| |
| reg_buf = drvdata->reg_buf; |
| |
| reg_buf[i++] = dcc_readl(drvdata, DCC_HW_VERSION); |
| reg_buf[i++] = dcc_readl(drvdata, DCC_HW_INFO); |
| reg_buf[i++] = dcc_readl(drvdata, DCC_EXEC_CTRL); |
| reg_buf[i++] = dcc_readl(drvdata, DCC_STATUS); |
| reg_buf[i++] = dcc_readl(drvdata, DCC_CFG); |
| reg_buf[i++] = dcc_readl(drvdata, DCC_FDA_CURR); |
| reg_buf[i++] = dcc_readl(drvdata, DCC_LLA_CURR); |
| |
| for (j = 0; j < DCC_MAX_LINK_LIST; j++) |
| reg_buf[i++] = dcc_readl(drvdata, DCC_LL_LOCK(j)); |
| for (j = 0; j < DCC_MAX_LINK_LIST; j++) |
| reg_buf[i++] = dcc_readl(drvdata, DCC_LL_CFG(j)); |
| for (j = 0; j < DCC_MAX_LINK_LIST; j++) |
| reg_buf[i++] = dcc_readl(drvdata, DCC_LL_BASE(j)); |
| for (j = 0; j < DCC_MAX_LINK_LIST; j++) |
| reg_buf[i++] = dcc_readl(drvdata, DCC_FD_BASE(j)); |
| |
| drvdata->reg_data.magic = DCC_REG_DUMP_MAGIC_V2; |
| } |
| |
| static void __dcc_first_crc(struct dcc_drvdata *drvdata) |
| { |
| int i; |
| |
| /* |
| * Need to send 2 triggers to DCC. First trigger sets CRC error status |
| * bit. So need second trigger to reset this bit. |
| */ |
| for (i = 0; i < 2; i++) { |
| if (!dcc_ready(drvdata)) |
| dev_err(drvdata->dev, "DCC is not ready!\n"); |
| |
| dcc_writel(drvdata, 1, |
| DCC_LL_SW_TRIGGER(drvdata->curr_list)); |
| } |
| |
| /* Clear CRC error interrupt */ |
| dcc_writel(drvdata, BIT(1), |
| DCC_LL_INT_STATUS(drvdata->curr_list)); |
| } |
| |
| static int dcc_valid_list(struct dcc_drvdata *drvdata, int curr_list) |
| { |
| uint32_t lock_reg; |
| |
| if (list_empty(&drvdata->cfg_head[curr_list])) |
| return -EINVAL; |
| |
| if (drvdata->enable[curr_list]) { |
| dev_err(drvdata->dev, "DCC is already enabled!\n"); |
| return -EINVAL; |
| } |
| |
| lock_reg = dcc_readl(drvdata, DCC_LL_LOCK(curr_list)); |
| if (lock_reg & 0x1) { |
| dev_err(drvdata->dev, "DCC is already enabled!\n"); |
| return -EINVAL; |
| } |
| |
| dev_err(drvdata->dev, "DCC list passed %d\n", curr_list); |
| return 0; |
| } |
| |
| static int dcc_enable(struct dcc_drvdata *drvdata) |
| { |
| int ret = 0; |
| int list; |
| uint32_t ram_cfg_base; |
| |
| mutex_lock(&drvdata->mutex); |
| |
| memset_io(drvdata->ram_base, 0, drvdata->ram_size); |
| |
| for (list = 0; list < DCC_MAX_LINK_LIST; list++) { |
| |
| if (dcc_valid_list(drvdata, list)) |
| continue; |
| |
| /* 1. Take ownership of the list */ |
| dcc_writel(drvdata, BIT(0), DCC_LL_LOCK(list)); |
| |
| /* 2. Program linked-list in the SRAM */ |
| ram_cfg_base = drvdata->ram_cfg; |
| ret = __dcc_ll_cfg(drvdata, list); |
| if (ret) { |
| dev_info(drvdata->dev, "DCC ram programming failed\n"); |
| goto err; |
| } |
| |
| /* 3. If in capture mode program DCC_RAM_CFG reg */ |
| if (drvdata->func_type[list] == DCC_FUNC_TYPE_CAPTURE) { |
| dcc_writel(drvdata, ram_cfg_base + |
| drvdata->ram_offset/4, DCC_LL_BASE(list)); |
| dcc_writel(drvdata, drvdata->ram_start + |
| drvdata->ram_offset/4, DCC_FD_BASE(list)); |
| dcc_writel(drvdata, 0, DCC_LL_TIMEOUT(list)); |
| } |
| |
| /* 4. Configure data sink and function type */ |
| dcc_writel(drvdata, ((drvdata->data_sink << 4) | |
| (drvdata->func_type[list])), DCC_LL_CFG(list)); |
| |
| /* 5. Clears interrupt status register */ |
| dcc_writel(drvdata, 0, DCC_LL_INT_ENABLE(list)); |
| dcc_writel(drvdata, (BIT(0) | BIT(1) | BIT(2)), |
| DCC_LL_INT_STATUS(list)); |
| |
| dev_info(drvdata->dev, "All values written to enable"); |
| /* Make sure all config is written in sram */ |
| mb(); |
| |
| drvdata->enable[list] = 1; |
| |
| if (drvdata->func_type[list] == DCC_FUNC_TYPE_CRC) { |
| __dcc_first_crc(drvdata); |
| |
| /* Enable CRC error interrupt */ |
| if (!drvdata->interrupt_disable) |
| dcc_writel(drvdata, BIT(1), |
| DCC_LL_INT_ENABLE(list)); |
| } |
| } |
| /* Save DCC registers */ |
| if (drvdata->save_reg) |
| __dcc_reg_dump(drvdata); |
| |
| err: |
| mutex_unlock(&drvdata->mutex); |
| return ret; |
| } |
| |
| static void dcc_disable(struct dcc_drvdata *drvdata) |
| { |
| int curr_list; |
| |
| mutex_lock(&drvdata->mutex); |
| |
| if (!dcc_ready(drvdata)) |
| dev_err(drvdata->dev, "DCC is not ready! Disabling DCC...\n"); |
| |
| for (curr_list = 0; curr_list < DCC_MAX_LINK_LIST; curr_list++) { |
| if (!drvdata->enable[curr_list]) |
| continue; |
| |
| dcc_writel(drvdata, 0, DCC_LL_LOCK(curr_list)); |
| drvdata->enable[curr_list] = 0; |
| } |
| drvdata->ram_cfg = 0; |
| drvdata->ram_start = 0; |
| /* Save DCC registers */ |
| if (drvdata->save_reg) |
| __dcc_reg_dump(drvdata); |
| |
| mutex_unlock(&drvdata->mutex); |
| } |
| |
| static ssize_t dcc_curr_list(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| unsigned long val; |
| uint32_t lock_reg; |
| |
| if (kstrtoul(buf, 16, &val)) |
| return -EINVAL; |
| |
| if (val >= DCC_MAX_LINK_LIST) |
| return -EINVAL; |
| |
| mutex_lock(&drvdata->mutex); |
| lock_reg = dcc_readl(drvdata, DCC_LL_LOCK(val)); |
| if (lock_reg & 0x1) { |
| dev_err(drvdata->dev, "DCC linked list is already configured!\n"); |
| mutex_unlock(&drvdata->mutex); |
| return -EINVAL; |
| } |
| drvdata->curr_list = val; |
| mutex_unlock(&drvdata->mutex); |
| |
| return size; |
| } |
| static DEVICE_ATTR(curr_list, 0200, |
| NULL, dcc_curr_list); |
| |
| static ssize_t dcc_show_func_type(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| ssize_t len = 0; |
| unsigned int i; |
| |
| for (i = 0; i < DCC_MAX_LINK_LIST; i++) |
| len += scnprintf(buf + len, PAGE_SIZE - len, "%u :%s\n", |
| i, str_dcc_func_type[drvdata->func_type[i]]); |
| |
| return len; |
| } |
| |
| static ssize_t dcc_store_func_type(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| char str[10] = ""; |
| int ret; |
| |
| if (strlen(buf) >= 10) |
| return -EINVAL; |
| if (sscanf(buf, "%s", str) != 1) |
| return -EINVAL; |
| |
| if (drvdata->curr_list >= DCC_MAX_LINK_LIST) { |
| dev_err(dev, |
| "Select link list to program using curr_list\n"); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&drvdata->mutex); |
| if (drvdata->enable[drvdata->curr_list]) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| if (!strcmp(str, str_dcc_func_type[DCC_FUNC_TYPE_CAPTURE])) |
| drvdata->func_type[drvdata->curr_list] = |
| DCC_FUNC_TYPE_CAPTURE; |
| else if (!strcmp(str, str_dcc_func_type[DCC_FUNC_TYPE_CRC])) |
| drvdata->func_type[drvdata->curr_list] = |
| DCC_FUNC_TYPE_CRC; |
| else { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ret = size; |
| out: |
| mutex_unlock(&drvdata->mutex); |
| return ret; |
| } |
| static DEVICE_ATTR(func_type, 0644, |
| dcc_show_func_type, dcc_store_func_type); |
| |
| static ssize_t dcc_show_data_sink(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| |
| return scnprintf(buf, PAGE_SIZE, "%s\n", |
| str_dcc_data_sink[drvdata->data_sink]); |
| } |
| |
| static ssize_t dcc_store_data_sink(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| char str[10] = ""; |
| int ret; |
| |
| if (strlen(buf) >= 10) |
| return -EINVAL; |
| if (sscanf(buf, "%s", str) != 1) |
| return -EINVAL; |
| |
| mutex_lock(&drvdata->mutex); |
| if (drvdata->enable[drvdata->curr_list]) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| if (!strcmp(str, str_dcc_data_sink[DCC_DATA_SINK_SRAM])) |
| drvdata->data_sink = DCC_DATA_SINK_SRAM; |
| else if (!strcmp(str, str_dcc_data_sink[DCC_DATA_SINK_ATB])) |
| drvdata->data_sink = DCC_DATA_SINK_ATB; |
| else { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ret = size; |
| out: |
| mutex_unlock(&drvdata->mutex); |
| return ret; |
| } |
| static DEVICE_ATTR(data_sink, 0644, |
| dcc_show_data_sink, dcc_store_data_sink); |
| |
| static ssize_t dcc_store_trigger(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| int ret = 0; |
| unsigned long val; |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| |
| if (kstrtoul(buf, 16, &val)) |
| return -EINVAL; |
| if (val != 1) |
| return -EINVAL; |
| |
| ret = dcc_sw_trigger(drvdata); |
| if (!ret) |
| ret = size; |
| |
| return ret; |
| } |
| static DEVICE_ATTR(trigger, 0200, NULL, dcc_store_trigger); |
| |
| static ssize_t dcc_show_enable(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| |
| return scnprintf(buf, PAGE_SIZE, "%u\n", |
| (unsigned int)drvdata->enable[drvdata->curr_list]); |
| } |
| |
| static ssize_t dcc_store_enable(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| int ret = 0; |
| unsigned long val; |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| |
| if (kstrtoul(buf, 16, &val)) |
| return -EINVAL; |
| |
| if (val) |
| ret = dcc_enable(drvdata); |
| else |
| dcc_disable(drvdata); |
| |
| if (!ret) |
| ret = size; |
| |
| return ret; |
| |
| } |
| static DEVICE_ATTR(enable, 0644, dcc_show_enable, |
| dcc_store_enable); |
| |
| static ssize_t dcc_show_config(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| struct dcc_config_entry *entry; |
| char local_buf[64]; |
| int len = 0, count = 0; |
| |
| buf[0] = '\0'; |
| |
| mutex_lock(&drvdata->mutex); |
| list_for_each_entry(entry, |
| &drvdata->cfg_head[drvdata->curr_list], list) { |
| if (entry->rd_wr_entry) |
| len = snprintf(local_buf, 64, |
| "Index: 0x%x, mask: 0x%x, val: 0x%x\n", |
| entry->index, entry->mask, |
| entry->rd_mod_wr); |
| else if (entry->loop_cnt) |
| len = snprintf(local_buf, 64, "Index: 0x%x, Loop: %d\n", |
| entry->index, entry->loop_cnt); |
| else |
| len = snprintf(local_buf, 64, |
| "Index: 0x%x, Base: 0x%x, Offset: 0x%x, len: 0x%x\n", |
| entry->index, entry->base, |
| entry->offset, entry->len); |
| |
| if ((count + len) > PAGE_SIZE) { |
| dev_err(dev, "DCC: Couldn't write complete config!\n"); |
| break; |
| } |
| |
| strlcat(buf, local_buf, PAGE_SIZE); |
| count += len; |
| } |
| |
| mutex_unlock(&drvdata->mutex); |
| |
| return count; |
| } |
| |
| static int dcc_config_add(struct dcc_drvdata *drvdata, unsigned int addr, |
| unsigned int len) |
| { |
| int ret; |
| struct dcc_config_entry *entry, *pentry; |
| unsigned int base, offset; |
| |
| mutex_lock(&drvdata->mutex); |
| |
| if (!len) { |
| dev_err(drvdata->dev, "DCC: Invalid length!\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| base = addr & BM(4, 31); |
| |
| if (!list_empty(&drvdata->cfg_head[drvdata->curr_list])) { |
| pentry = list_last_entry(&drvdata->cfg_head[drvdata->curr_list], |
| struct dcc_config_entry, list); |
| |
| if (addr >= (pentry->base + pentry->offset) && |
| addr <= (pentry->base + pentry->offset + MAX_DCC_OFFSET)) { |
| |
| /* Re-use base address from last entry */ |
| base = pentry->base; |
| |
| /* |
| * Check if new address is contiguous to last entry's |
| * addresses. If yes then we can re-use last entry and |
| * just need to update its length. |
| */ |
| if ((pentry->len * 4 + pentry->base + pentry->offset) |
| == addr) { |
| len += pentry->len; |
| |
| /* |
| * Check if last entry can hold additional new |
| * length. If yes then we don't need to create |
| * a new entry else we need to add a new entry |
| * with same base but updated offset. |
| */ |
| if (len > MAX_DCC_LEN) |
| pentry->len = MAX_DCC_LEN; |
| else |
| pentry->len = len; |
| |
| /* |
| * Update start addr and len for remaining |
| * addresses, which will be part of new |
| * entry. |
| */ |
| addr = pentry->base + pentry->offset + |
| pentry->len * 4; |
| len -= pentry->len; |
| } |
| } |
| } |
| |
| offset = addr - base; |
| |
| while (len) { |
| entry = devm_kzalloc(drvdata->dev, sizeof(*entry), GFP_KERNEL); |
| if (!entry) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| entry->base = base; |
| entry->offset = offset; |
| entry->len = min_t(uint32_t, len, MAX_DCC_LEN); |
| entry->index = drvdata->nr_config[drvdata->curr_list]++; |
| INIT_LIST_HEAD(&entry->list); |
| list_add_tail(&entry->list, |
| &drvdata->cfg_head[drvdata->curr_list]); |
| |
| len -= entry->len; |
| offset += MAX_DCC_LEN * 4; |
| } |
| |
| mutex_unlock(&drvdata->mutex); |
| return 0; |
| err: |
| mutex_unlock(&drvdata->mutex); |
| return ret; |
| } |
| |
| static ssize_t dcc_store_config(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| int ret, len; |
| unsigned int base; |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| int nval; |
| |
| nval = sscanf(buf, "%x %i", &base, &len); |
| if (nval <= 0 || nval > 2) |
| return -EINVAL; |
| |
| if (nval == 1) |
| len = 1; |
| |
| if (drvdata->curr_list >= DCC_MAX_LINK_LIST) { |
| dev_err(dev, "Select link list to program using curr_list\n"); |
| return -EINVAL; |
| } |
| |
| ret = dcc_config_add(drvdata, base, len); |
| if (ret) |
| return ret; |
| |
| return size; |
| |
| } |
| static DEVICE_ATTR(config, 0644, dcc_show_config, |
| dcc_store_config); |
| |
| static void dcc_config_reset(struct dcc_drvdata *drvdata) |
| { |
| struct dcc_config_entry *entry, *temp; |
| int curr_list; |
| |
| mutex_lock(&drvdata->mutex); |
| |
| for (curr_list = 0; curr_list < DCC_MAX_LINK_LIST; curr_list++) { |
| |
| list_for_each_entry_safe(entry, temp, |
| &drvdata->cfg_head[curr_list], list) { |
| list_del(&entry->list); |
| devm_kfree(drvdata->dev, entry); |
| drvdata->nr_config[curr_list]--; |
| } |
| } |
| drvdata->ram_start = 0; |
| drvdata->ram_cfg = 0; |
| mutex_unlock(&drvdata->mutex); |
| } |
| |
| static ssize_t dcc_store_config_reset(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| unsigned long val; |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| |
| if (kstrtoul(buf, 16, &val)) |
| return -EINVAL; |
| |
| if (val) |
| dcc_config_reset(drvdata); |
| |
| return size; |
| } |
| static DEVICE_ATTR(config_reset, 0200, NULL, dcc_store_config_reset); |
| |
| static ssize_t dcc_show_crc_error(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int ret; |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| |
| mutex_lock(&drvdata->mutex); |
| if (!drvdata->enable[drvdata->curr_list]) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = scnprintf(buf, PAGE_SIZE, "%u\n", |
| (unsigned int)BVAL(dcc_readl( |
| drvdata, DCC_LL_INT_STATUS(drvdata->curr_list)), 1)); |
| err: |
| mutex_unlock(&drvdata->mutex); |
| return ret; |
| } |
| static DEVICE_ATTR(crc_error, 0444, dcc_show_crc_error, NULL); |
| |
| static ssize_t dcc_show_ready(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int ret; |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| |
| mutex_lock(&drvdata->mutex); |
| if (!drvdata->enable[drvdata->curr_list]) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = scnprintf(buf, PAGE_SIZE, "%u\n", |
| (unsigned int)BVAL(dcc_readl(drvdata, DCC_STATUS), 1)); |
| err: |
| mutex_unlock(&drvdata->mutex); |
| return ret; |
| } |
| static DEVICE_ATTR(ready, 0444, dcc_show_ready, NULL); |
| |
| static ssize_t dcc_show_interrupt_disable(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| |
| return scnprintf(buf, PAGE_SIZE, "%u\n", |
| (unsigned int)drvdata->interrupt_disable); |
| } |
| |
| static ssize_t dcc_store_interrupt_disable(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| unsigned long val; |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| |
| if (kstrtoul(buf, 16, &val)) |
| return -EINVAL; |
| |
| mutex_lock(&drvdata->mutex); |
| drvdata->interrupt_disable = (val ? 1:0); |
| mutex_unlock(&drvdata->mutex); |
| return size; |
| } |
| static DEVICE_ATTR(interrupt_disable, 0644, |
| dcc_show_interrupt_disable, dcc_store_interrupt_disable); |
| |
| static ssize_t dcc_store_loop(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| int ret = size; |
| unsigned long loop_cnt; |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| struct dcc_config_entry *entry; |
| |
| mutex_lock(&drvdata->mutex); |
| |
| if (kstrtoul(buf, 16, &loop_cnt)) |
| ret = -EINVAL; |
| |
| entry = devm_kzalloc(drvdata->dev, sizeof(*entry), GFP_KERNEL); |
| if (!entry) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| entry->loop_cnt = min_t(uint32_t, loop_cnt, MAX_LOOP_CNT); |
| entry->index = drvdata->nr_config[drvdata->curr_list]++; |
| INIT_LIST_HEAD(&entry->list); |
| list_add_tail(&entry->list, &drvdata->cfg_head[drvdata->curr_list]); |
| |
| err: |
| mutex_unlock(&drvdata->mutex); |
| return ret; |
| } |
| static DEVICE_ATTR(loop, 0200, NULL, dcc_store_loop); |
| |
| static ssize_t dcc_rd_mod_wr(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| int ret = size; |
| int nval; |
| unsigned int mask, val; |
| struct dcc_drvdata *drvdata = dev_get_drvdata(dev); |
| struct dcc_config_entry *entry; |
| |
| mutex_lock(&drvdata->mutex); |
| |
| nval = sscanf(buf, "%x %x", &mask, &val); |
| |
| if (nval <= 1 || nval > 2) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| if (list_empty(&drvdata->cfg_head[drvdata->curr_list])) { |
| dev_err(drvdata->dev, "DCC: No read address programmed!\n"); |
| ret = -EPERM; |
| goto err; |
| } |
| |
| entry = devm_kzalloc(drvdata->dev, sizeof(*entry), GFP_KERNEL); |
| if (!entry) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| entry->rd_wr_entry = true; |
| entry->mask = mask; |
| entry->rd_mod_wr = val; |
| entry->index = drvdata->nr_config[drvdata->curr_list]++; |
| INIT_LIST_HEAD(&entry->list); |
| list_add_tail(&entry->list, &drvdata->cfg_head[drvdata->curr_list]); |
| err: |
| mutex_unlock(&drvdata->mutex); |
| return ret; |
| } |
| static DEVICE_ATTR(rd_mod_wr, 0200, NULL, dcc_rd_mod_wr); |
| |
| static const struct device_attribute *dcc_attrs[] = { |
| &dev_attr_func_type, |
| &dev_attr_data_sink, |
| &dev_attr_trigger, |
| &dev_attr_enable, |
| &dev_attr_config, |
| &dev_attr_config_reset, |
| &dev_attr_ready, |
| &dev_attr_crc_error, |
| &dev_attr_interrupt_disable, |
| &dev_attr_loop, |
| &dev_attr_rd_mod_wr, |
| &dev_attr_curr_list, |
| NULL, |
| }; |
| |
| static int dcc_create_files(struct device *dev, |
| const struct device_attribute **attrs) |
| { |
| int ret = 0, i; |
| |
| for (i = 0; attrs[i] != NULL; i++) { |
| ret = device_create_file(dev, attrs[i]); |
| if (ret) { |
| dev_err(dev, "DCC: Couldn't create sysfs attribute: %s!\n", |
| attrs[i]->attr.name); |
| break; |
| } |
| } |
| return ret; |
| } |
| |
| static int dcc_sram_open(struct inode *inode, struct file *file) |
| { |
| struct dcc_drvdata *drvdata = container_of(inode->i_cdev, |
| struct dcc_drvdata, |
| sram_dev); |
| file->private_data = drvdata; |
| |
| return 0; |
| } |
| |
| static ssize_t dcc_sram_read(struct file *file, char __user *data, |
| size_t len, loff_t *ppos) |
| { |
| unsigned char *buf; |
| struct dcc_drvdata *drvdata = file->private_data; |
| |
| /* EOF check */ |
| if (drvdata->ram_size <= *ppos) |
| return 0; |
| |
| if ((*ppos + len) > drvdata->ram_size) |
| len = (drvdata->ram_size - *ppos); |
| |
| buf = kzalloc(len, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| memcpy_fromio(buf, (drvdata->ram_base + *ppos), len); |
| |
| if (copy_to_user(data, buf, len)) { |
| dev_err(drvdata->dev, |
| "DCC: Couldn't copy all data to user!\n"); |
| kfree(buf); |
| return -EFAULT; |
| } |
| |
| *ppos += len; |
| |
| kfree(buf); |
| |
| return len; |
| } |
| |
| static const struct file_operations dcc_sram_fops = { |
| .owner = THIS_MODULE, |
| .open = dcc_sram_open, |
| .read = dcc_sram_read, |
| .llseek = no_llseek, |
| }; |
| |
| static int dcc_sram_dev_register(struct dcc_drvdata *drvdata) |
| { |
| int ret; |
| struct device *device; |
| dev_t dev; |
| |
| ret = alloc_chrdev_region(&dev, 0, 1, drvdata->sram_node); |
| if (ret) |
| goto err_alloc; |
| |
| cdev_init(&drvdata->sram_dev, &dcc_sram_fops); |
| |
| drvdata->sram_dev.owner = THIS_MODULE; |
| ret = cdev_add(&drvdata->sram_dev, dev, 1); |
| if (ret) |
| goto err_cdev_add; |
| |
| drvdata->sram_class = class_create(THIS_MODULE, |
| drvdata->sram_node); |
| if (IS_ERR(drvdata->sram_class)) { |
| ret = PTR_ERR(drvdata->sram_class); |
| goto err_class_create; |
| } |
| |
| device = device_create(drvdata->sram_class, NULL, |
| drvdata->sram_dev.dev, drvdata, |
| drvdata->sram_node); |
| if (IS_ERR(device)) { |
| ret = PTR_ERR(device); |
| goto err_dev_create; |
| } |
| |
| return 0; |
| err_dev_create: |
| class_destroy(drvdata->sram_class); |
| err_class_create: |
| cdev_del(&drvdata->sram_dev); |
| err_cdev_add: |
| unregister_chrdev_region(drvdata->sram_dev.dev, 1); |
| err_alloc: |
| return ret; |
| } |
| |
| static void dcc_sram_dev_deregister(struct dcc_drvdata *drvdata) |
| { |
| device_destroy(drvdata->sram_class, drvdata->sram_dev.dev); |
| class_destroy(drvdata->sram_class); |
| cdev_del(&drvdata->sram_dev); |
| unregister_chrdev_region(drvdata->sram_dev.dev, 1); |
| } |
| |
| static int dcc_sram_dev_init(struct dcc_drvdata *drvdata) |
| { |
| int ret = 0; |
| size_t node_size; |
| char *node_name = "dcc_sram"; |
| struct device *dev = drvdata->dev; |
| |
| node_size = strlen(node_name) + 1; |
| |
| drvdata->sram_node = devm_kzalloc(dev, node_size, GFP_KERNEL); |
| if (!drvdata->sram_node) |
| return -ENOMEM; |
| |
| strlcpy(drvdata->sram_node, node_name, node_size); |
| ret = dcc_sram_dev_register(drvdata); |
| if (ret) |
| dev_err(drvdata->dev, "DCC: sram node not registered.\n"); |
| |
| return ret; |
| } |
| |
| static void dcc_sram_dev_exit(struct dcc_drvdata *drvdata) |
| { |
| dcc_sram_dev_deregister(drvdata); |
| } |
| |
| static void dcc_allocate_dump_mem(struct dcc_drvdata *drvdata) |
| { |
| int ret; |
| struct device *dev = drvdata->dev; |
| struct msm_dump_entry reg_dump_entry, sram_dump_entry; |
| |
| /* Allocate memory for dcc reg dump */ |
| drvdata->reg_buf = devm_kzalloc(dev, drvdata->reg_size, GFP_KERNEL); |
| if (drvdata->reg_buf) { |
| drvdata->reg_data.addr = virt_to_phys(drvdata->reg_buf); |
| drvdata->reg_data.len = drvdata->reg_size; |
| reg_dump_entry.id = MSM_DUMP_DATA_DCC_REG; |
| reg_dump_entry.addr = virt_to_phys(&drvdata->reg_data); |
| ret = msm_dump_data_register(MSM_DUMP_TABLE_APPS, |
| ®_dump_entry); |
| if (ret) { |
| dev_err(dev, "DCC REG dump setup failed\n"); |
| devm_kfree(dev, drvdata->reg_buf); |
| } |
| } else { |
| dev_err(dev, "DCC REG dump allocation failed\n"); |
| } |
| |
| /* Allocate memory for dcc sram dump */ |
| drvdata->sram_buf = devm_kzalloc(dev, drvdata->ram_size, GFP_KERNEL); |
| if (drvdata->sram_buf) { |
| drvdata->sram_data.addr = virt_to_phys(drvdata->sram_buf); |
| drvdata->sram_data.len = drvdata->ram_size; |
| sram_dump_entry.id = MSM_DUMP_DATA_DCC_SRAM; |
| sram_dump_entry.addr = virt_to_phys(&drvdata->sram_data); |
| ret = msm_dump_data_register(MSM_DUMP_TABLE_APPS, |
| &sram_dump_entry); |
| if (ret) { |
| dev_err(dev, "DCC SRAM dump setup failed\n"); |
| devm_kfree(dev, drvdata->sram_buf); |
| } |
| } else { |
| dev_err(dev, "DCC SRAM dump allocation failed\n"); |
| } |
| } |
| |
| static int dcc_probe(struct platform_device *pdev) |
| { |
| int ret, i; |
| struct device *dev = &pdev->dev; |
| struct dcc_drvdata *drvdata; |
| struct resource *res; |
| const char *data_sink; |
| |
| drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); |
| if (!drvdata) |
| return -ENOMEM; |
| |
| drvdata->dev = &pdev->dev; |
| platform_set_drvdata(pdev, drvdata); |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dcc-base"); |
| if (!res) |
| return -EINVAL; |
| |
| drvdata->reg_size = resource_size(res); |
| drvdata->base = devm_ioremap(dev, res->start, resource_size(res)); |
| if (!drvdata->base) |
| return -ENOMEM; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "dcc-ram-base"); |
| if (!res) |
| return -EINVAL; |
| |
| drvdata->ram_size = resource_size(res); |
| drvdata->ram_base = devm_ioremap(dev, res->start, resource_size(res)); |
| if (!drvdata->ram_base) |
| return -ENOMEM; |
| |
| ret = of_property_read_u32(pdev->dev.of_node, "dcc-ram-offset", |
| &drvdata->ram_offset); |
| if (ret) |
| return -EINVAL; |
| |
| drvdata->save_reg = of_property_read_bool(pdev->dev.of_node, |
| "qcom,save-reg"); |
| |
| mutex_init(&drvdata->mutex); |
| |
| for (i = 0; i < DCC_MAX_LINK_LIST; i++) { |
| INIT_LIST_HEAD(&drvdata->cfg_head[i]); |
| drvdata->nr_config[i] = 0; |
| } |
| |
| memset_io(drvdata->ram_base, 0, drvdata->ram_size); |
| |
| drvdata->data_sink = DCC_DATA_SINK_SRAM; |
| ret = of_property_read_string(pdev->dev.of_node, "qcom,data-sink", |
| &data_sink); |
| if (!ret) { |
| for (i = 0; i < ARRAY_SIZE(str_dcc_data_sink); i++) |
| if (!strcmp(data_sink, str_dcc_data_sink[i])) { |
| drvdata->data_sink = i; |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(str_dcc_data_sink)) { |
| dev_err(dev, "Unknown sink type for DCC! Using '%s' as data sink\n", |
| str_dcc_data_sink[drvdata->data_sink]); |
| } |
| } |
| |
| drvdata->curr_list = DCC_INVALID_LINK_LIST; |
| |
| ret = dcc_sram_dev_init(drvdata); |
| if (ret) |
| goto err; |
| |
| ret = dcc_create_files(dev, dcc_attrs); |
| if (ret) |
| goto err; |
| |
| dcc_allocate_dump_mem(drvdata); |
| return 0; |
| err: |
| return ret; |
| } |
| |
| static int dcc_remove(struct platform_device *pdev) |
| { |
| struct dcc_drvdata *drvdata = platform_get_drvdata(pdev); |
| |
| dcc_sram_dev_exit(drvdata); |
| |
| dcc_config_reset(drvdata); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id msm_dcc_match[] = { |
| { .compatible = "qcom,dcc_v2"}, |
| {} |
| }; |
| |
| static struct platform_driver dcc_driver = { |
| .probe = dcc_probe, |
| .remove = dcc_remove, |
| .driver = { |
| .name = "msm-dcc", |
| .owner = THIS_MODULE, |
| .of_match_table = msm_dcc_match, |
| }, |
| }; |
| |
| static int __init dcc_init(void) |
| { |
| return platform_driver_register(&dcc_driver); |
| } |
| module_init(dcc_init); |
| |
| static void __exit dcc_exit(void) |
| { |
| platform_driver_unregister(&dcc_driver); |
| } |
| module_exit(dcc_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("MSM data capture and compare engine"); |