| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| #include "skeleton.dtsi" |
| |
| / { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| model = "Broadcom STB (bcm7445)"; |
| compatible = "brcm,bcm7445", "brcm,brcmstb"; |
| interrupt-parent = <&gic>; |
| |
| chosen { |
| bootargs = "console=ttyS0,115200 earlyprintk"; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "brcm,brahma-b15"; |
| device_type = "cpu"; |
| enable-method = "brcm,brahma-b15"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| compatible = "brcm,brahma-b15"; |
| device_type = "cpu"; |
| enable-method = "brcm,brahma-b15"; |
| reg = <1>; |
| }; |
| |
| cpu@2 { |
| compatible = "brcm,brahma-b15"; |
| device_type = "cpu"; |
| enable-method = "brcm,brahma-b15"; |
| reg = <2>; |
| }; |
| |
| cpu@3 { |
| compatible = "brcm,brahma-b15"; |
| device_type = "cpu"; |
| enable-method = "brcm,brahma-b15"; |
| reg = <3>; |
| }; |
| }; |
| |
| gic: interrupt-controller@ffd00000 { |
| compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic"; |
| reg = <0x00 0xffd01000 0x00 0x1000>, |
| <0x00 0xffd02000 0x00 0x2000>, |
| <0x00 0xffd04000 0x00 0x2000>, |
| <0x00 0xffd06000 0x00 0x2000>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| rdb { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0 0x00 0xf0000000 0x1000000>; |
| |
| serial@40ab00 { |
| compatible = "ns16550a"; |
| reg = <0x40ab00 0x20>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <81000000>; |
| }; |
| |
| sun_top_ctrl: syscon@404000 { |
| compatible = "brcm,bcm7445-sun-top-ctrl", |
| "syscon"; |
| reg = <0x404000 0x51c>; |
| }; |
| |
| hif_cpubiuctrl: syscon@3e2400 { |
| compatible = "brcm,bcm7445-hif-cpubiuctrl", |
| "syscon"; |
| reg = <0x3e2400 0x5b4>; |
| }; |
| |
| hif_continuation: syscon@452000 { |
| compatible = "brcm,bcm7445-hif-continuation", |
| "syscon"; |
| reg = <0x452000 0x100>; |
| }; |
| |
| irq0_intc: interrupt-controller@40a780 { |
| compatible = "brcm,bcm7120-l2-intc"; |
| interrupt-parent = <&gic>; |
| #interrupt-cells = <1>; |
| reg = <0x40a780 0x8>; |
| interrupt-controller; |
| interrupts = <GIC_SPI 0x45 0x0>, |
| <GIC_SPI 0x43 0x0>; |
| brcm,int-map-mask = <0x25c>, <0x7000000>; |
| brcm,int-fwd-mask = <0x70000>; |
| }; |
| }; |
| |
| smpboot { |
| compatible = "brcm,brcmstb-smpboot"; |
| syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; |
| syscon-cont = <&hif_continuation>; |
| }; |
| |
| reboot { |
| compatible = "brcm,brcmstb-reboot"; |
| syscon = <&sun_top_ctrl 0x304 0x308>; |
| }; |
| }; |