drivers/video/auo_k1901fb.c - kernel/msm-4.9 - Gitiles

 /*
  * auok190xfb.c -- FB driver for AUO-K1901 controllers
  *
  * Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de>
  *
  * based on broadsheetfb.c
  *
  * Copyright (C) 2008, Jaya Kumar
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
  *
  * This driver is written to be used with the AUO-K1901 display controller.
  *
  * It is intended to be architecture independent. A board specific driver
  * must be used to perform all the physical IO interactions.
  *
  * The controller supports different update modes:
  * mode0+1 16 step gray (4bit)
  * mode2+3 4 step gray (2bit)
  * mode4+5 2 step gray (1bit)
  * - mode4 is described as "without LUT"
  * mode7 automatic selection of update mode
  *
  * The most interesting difference to the K1900 is the ability to do screen
  * updates in an asynchronous fashion. Where the K1900 needs to wait for the
  * current update to complete, the K1901 can process later updates already.
  */

 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/list.h>
 #include <linux/firmware.h>
 #include <linux/gpio.h>
 #include <linux/pm_runtime.h>

 #include <video/auo_k190xfb.h>

 #include "auo_k190x.h"

 /*
  * AUO-K1901 specific commands
  */

 #define AUOK1901_CMD_LUT_INTERFACE	0x0005
 #define AUOK1901_CMD_DMA_START		0x1001
 #define AUOK1901_CMD_CURSOR_START	0x1007
 #define AUOK1901_CMD_CURSOR_STOP	AUOK190X_CMD_DATA_STOP
 #define AUOK1901_CMD_DDMA_START		0x1009

 #define AUOK1901_INIT_GATE_PULSE_LOW	(0 << 14)
 #define AUOK1901_INIT_GATE_PULSE_HIGH	(1 << 14)
 #define AUOK1901_INIT_SINGLE_GATE	(0 << 13)
 #define AUOK1901_INIT_DOUBLE_GATE	(1 << 13)

 /* Bits to pixels
  *   Mode	15-12	11-8	7-4	3-0
  *   format2	2	T	1	T
  *   format3	1	T	2	T
  *   format4	T	2	T	1
  *   format5	T	1	T	2
  *
  *   halftone modes:
  *   format6	2	2	1	1
  *   format7	1	1	2	2
  */
 #define AUOK1901_INIT_FORMAT2		(1 << 7)
 #define AUOK1901_INIT_FORMAT3		((1 << 7) | (1 << 6))
 #define AUOK1901_INIT_FORMAT4		(1 << 8)
 #define AUOK1901_INIT_FORMAT5		((1 << 8) | (1 << 6))
 #define AUOK1901_INIT_FORMAT6		((1 << 8) | (1 << 7))
 #define AUOK1901_INIT_FORMAT7		((1 << 8) | (1 << 7) | (1 << 6))

 /* res[4] to bit 10
  * res[3-0] to bits 5-2
  */
 #define AUOK1901_INIT_RESOLUTION(_res)	(((_res & (1 << 4)) << 6) \
 					 | ((_res & 0xf) << 2))

 /*
  * portrait / landscape orientation in AUOK1901_CMD_DMA_START
  */
 #define AUOK1901_DMA_ROTATE90(_rot)		((_rot & 1) << 13)

 /*
  * equivalent to 1 << 11, needs the ~ to have same rotation like K1900
  */
 #define AUOK1901_DDMA_ROTATE180(_rot)		((~_rot & 2) << 10)

 static void auok1901_init(struct auok190xfb_par *par)
 {
 	struct auok190x_board *board = par->board;
 	u16 init_param = 0;

 	init_param |= AUOK190X_INIT_INVERSE_WHITE;
 	init_param |= AUOK190X_INIT_FORMAT0;
 	init_param |= AUOK1901_INIT_RESOLUTION(par->resolution);
 	init_param |= AUOK190X_INIT_SHIFT_LEFT;

 	auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param);

 	/* let the controller finish */
 	board->wait_for_rdy(par);
 }

 static void auok1901_update_region(struct auok190xfb_par *par, int mode,
 						u16 y1, u16 y2)
 {
 	struct device *dev = par->info->device;
 	unsigned char *buf = (unsigned char *)par->info->screen_base;
 	int xres = par->info->var.xres;
 	u16 args[5];

 	pm_runtime_get_sync(dev);

 	mutex_lock(&(par->io_lock));

 	/* y1 and y2 must be a multiple of 2 so drop the lowest bit */
 	y1 &= 0xfffe;
 	y2 &= 0xfffe;

 	dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n",
 		1, y1+1, xres, y2-y1, mode);

 	/* K1901: first transfer the region data */
 	args[0] = AUOK1901_DMA_ROTATE90(par->rotation) | 1;
 	args[1] = y1 + 1;
 	args[2] = xres;
 	args[3] = y2 - y1;
 	buf += y1 * xres;
 	auok190x_send_cmdargs_pixels_nowait(par, AUOK1901_CMD_DMA_START, 4,
 					    args, ((y2 - y1) * xres)/2,
 					    (u16 *) buf);
 	auok190x_send_command_nowait(par, AUOK190X_CMD_DATA_STOP);

 	/* K1901: second tell the controller to update the region with mode */
 	args[0] = mode | AUOK1901_DDMA_ROTATE180(par->rotation);
 	args[1] = 1;
 	args[2] = y1 + 1;
 	args[3] = xres;
 	args[4] = y2 - y1;
 	auok190x_send_cmdargs_nowait(par, AUOK1901_CMD_DDMA_START, 5, args);

 	par->update_cnt++;

 	mutex_unlock(&(par->io_lock));

 	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);
 }

 static void auok1901fb_dpy_update_pages(struct auok190xfb_par *par,
 						u16 y1, u16 y2)
 {
 	int mode;

 	if (par->update_mode < 0) {
 		mode = AUOK190X_UPDATE_MODE(1);
 		par->last_mode = -1;
 	} else {
 		mode = AUOK190X_UPDATE_MODE(par->update_mode);
 		par->last_mode = par->update_mode;
 	}

 	if (par->flash)
 		mode |= AUOK190X_UPDATE_NONFLASH;

 	auok1901_update_region(par, mode, y1, y2);
 }

 static void auok1901fb_dpy_update(struct auok190xfb_par *par)
 {
 	int mode;

 	/* When doing full updates, wait for the controller to be ready
 	 * This will hopefully catch some hangs of the K1901
 	 */
 	par->board->wait_for_rdy(par);

 	if (par->update_mode < 0) {
 		mode = AUOK190X_UPDATE_MODE(0);
 		par->last_mode = -1;
 	} else {
 		mode = AUOK190X_UPDATE_MODE(par->update_mode);
 		par->last_mode = par->update_mode;
 	}

 	if (par->flash)
 		mode |= AUOK190X_UPDATE_NONFLASH;

 	auok1901_update_region(par, mode, 0, par->info->var.yres);
 	par->update_cnt = 0;
 }

 static bool auok1901fb_need_refresh(struct auok190xfb_par *par)
 {
 	return (par->update_cnt > 10);
 }

 static int auok1901fb_probe(struct platform_device *pdev)
 {
 	struct auok190x_init_data init;
 	struct auok190x_board *board;

 	/* pick up board specific routines */
 	board = pdev->dev.platform_data;
 	if (!board)
 		return -EINVAL;

 	/* fill temporary init struct for common init */
 	init.id = "auo_k1901fb";
 	init.board = board;
 	init.update_partial = auok1901fb_dpy_update_pages;
 	init.update_all = auok1901fb_dpy_update;
 	init.need_refresh = auok1901fb_need_refresh;
 	init.init = auok1901_init;

 	return auok190x_common_probe(pdev, &init);
 }

 static int auok1901fb_remove(struct platform_device *pdev)
 {
 	return auok190x_common_remove(pdev);
 }

 static struct platform_driver auok1901fb_driver = {
 	.probe	= auok1901fb_probe,
 	.remove = auok1901fb_remove,
 	.driver	= {
 		.owner	= THIS_MODULE,
 		.name	= "auo_k1901fb",
 		.pm = &auok190x_pm,
 	},
 };
 module_platform_driver(auok1901fb_driver);

 MODULE_DESCRIPTION("framebuffer driver for the AUO-K1901 EPD controller");
 MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
 MODULE_LICENSE("GPL");
	/*
	* auok190xfb.c -- FB driver for AUO-K1901 controllers
	*
	* Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de>
	*
	* based on broadsheetfb.c
	*
	* Copyright (C) 2008, Jaya Kumar
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	* Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
	*
	* This driver is written to be used with the AUO-K1901 display controller.
	*
	* It is intended to be architecture independent. A board specific driver
	* must be used to perform all the physical IO interactions.
	*
	* The controller supports different update modes:
	* mode0+1 16 step gray (4bit)
	* mode2+3 4 step gray (2bit)
	* mode4+5 2 step gray (1bit)
	* - mode4 is described as "without LUT"
	* mode7 automatic selection of update mode
	*
	* The most interesting difference to the K1900 is the ability to do screen
	* updates in an asynchronous fashion. Where the K1900 needs to wait for the
	* current update to complete, the K1901 can process later updates already.
	*/

	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/errno.h>
	#include <linux/string.h>
	#include <linux/mm.h>
	#include <linux/slab.h>
	#include <linux/delay.h>
	#include <linux/interrupt.h>
	#include <linux/fb.h>
	#include <linux/init.h>
	#include <linux/platform_device.h>
	#include <linux/list.h>
	#include <linux/firmware.h>
	#include <linux/gpio.h>
	#include <linux/pm_runtime.h>

	#include <video/auo_k190xfb.h>

	#include "auo_k190x.h"

	/*
	* AUO-K1901 specific commands
	*/

	#define AUOK1901_CMD_LUT_INTERFACE 0x0005
	#define AUOK1901_CMD_DMA_START 0x1001
	#define AUOK1901_CMD_CURSOR_START 0x1007
	#define AUOK1901_CMD_CURSOR_STOP AUOK190X_CMD_DATA_STOP
	#define AUOK1901_CMD_DDMA_START 0x1009

	#define AUOK1901_INIT_GATE_PULSE_LOW (0 << 14)
	#define AUOK1901_INIT_GATE_PULSE_HIGH (1 << 14)
	#define AUOK1901_INIT_SINGLE_GATE (0 << 13)
	#define AUOK1901_INIT_DOUBLE_GATE (1 << 13)

	/* Bits to pixels
	* Mode 15-12 11-8 7-4 3-0
	* format2 2 T 1 T
	* format3 1 T 2 T
	* format4 T 2 T 1
	* format5 T 1 T 2
	*
	* halftone modes:
	* format6 2 2 1 1
	* format7 1 1 2 2
	*/
	#define AUOK1901_INIT_FORMAT2 (1 << 7)
	#define AUOK1901_INIT_FORMAT3 ((1 << 7) \| (1 << 6))
	#define AUOK1901_INIT_FORMAT4 (1 << 8)
	#define AUOK1901_INIT_FORMAT5 ((1 << 8) \| (1 << 6))
	#define AUOK1901_INIT_FORMAT6 ((1 << 8) \| (1 << 7))
	#define AUOK1901_INIT_FORMAT7 ((1 << 8) \| (1 << 7) \| (1 << 6))

	/* res[4] to bit 10
	* res[3-0] to bits 5-2
	*/
	#define AUOK1901_INIT_RESOLUTION(_res) (((_res & (1 << 4)) << 6) \
	\| ((_res & 0xf) << 2))

	/*
	* portrait / landscape orientation in AUOK1901_CMD_DMA_START
	*/
	#define AUOK1901_DMA_ROTATE90(_rot) ((_rot & 1) << 13)

	/*
	* equivalent to 1 << 11, needs the ~ to have same rotation like K1900
	*/
	#define AUOK1901_DDMA_ROTATE180(_rot) ((~_rot & 2) << 10)

	static void auok1901_init(struct auok190xfb_par *par)
	{
	struct auok190x_board *board = par->board;
	u16 init_param = 0;

	init_param \|= AUOK190X_INIT_INVERSE_WHITE;
	init_param \|= AUOK190X_INIT_FORMAT0;
	init_param \|= AUOK1901_INIT_RESOLUTION(par->resolution);
	init_param \|= AUOK190X_INIT_SHIFT_LEFT;

	auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param);

	/* let the controller finish */
	board->wait_for_rdy(par);
	}

	static void auok1901_update_region(struct auok190xfb_par *par, int mode,
	u16 y1, u16 y2)
	{
	struct device *dev = par->info->device;
	unsigned char buf = (unsigned char )par->info->screen_base;
	int xres = par->info->var.xres;
	u16 args[5];

	pm_runtime_get_sync(dev);

	mutex_lock(&(par->io_lock));

	/* y1 and y2 must be a multiple of 2 so drop the lowest bit */
	y1 &= 0xfffe;
	y2 &= 0xfffe;

	dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n",
	1, y1+1, xres, y2-y1, mode);

	/* K1901: first transfer the region data */
	args[0] = AUOK1901_DMA_ROTATE90(par->rotation) \| 1;
	args[1] = y1 + 1;
	args[2] = xres;
	args[3] = y2 - y1;
	buf += y1 * xres;
	auok190x_send_cmdargs_pixels_nowait(par, AUOK1901_CMD_DMA_START, 4,
	args, ((y2 - y1) * xres)/2,
	(u16 *) buf);
	auok190x_send_command_nowait(par, AUOK190X_CMD_DATA_STOP);

	/* K1901: second tell the controller to update the region with mode */
	args[0] = mode \| AUOK1901_DDMA_ROTATE180(par->rotation);
	args[1] = 1;
	args[2] = y1 + 1;
	args[3] = xres;
	args[4] = y2 - y1;
	auok190x_send_cmdargs_nowait(par, AUOK1901_CMD_DDMA_START, 5, args);

	par->update_cnt++;

	mutex_unlock(&(par->io_lock));

	pm_runtime_mark_last_busy(dev);
	pm_runtime_put_autosuspend(dev);
	}

	static void auok1901fb_dpy_update_pages(struct auok190xfb_par *par,
	u16 y1, u16 y2)
	{
	int mode;

	if (par->update_mode < 0) {
	mode = AUOK190X_UPDATE_MODE(1);
	par->last_mode = -1;
	} else {
	mode = AUOK190X_UPDATE_MODE(par->update_mode);
	par->last_mode = par->update_mode;
	}

	if (par->flash)
	mode \|= AUOK190X_UPDATE_NONFLASH;

	auok1901_update_region(par, mode, y1, y2);
	}

	static void auok1901fb_dpy_update(struct auok190xfb_par *par)
	{
	int mode;

	/* When doing full updates, wait for the controller to be ready
	* This will hopefully catch some hangs of the K1901
	*/
	par->board->wait_for_rdy(par);

	if (par->update_mode < 0) {
	mode = AUOK190X_UPDATE_MODE(0);
	par->last_mode = -1;
	} else {
	mode = AUOK190X_UPDATE_MODE(par->update_mode);
	par->last_mode = par->update_mode;
	}

	if (par->flash)
	mode \|= AUOK190X_UPDATE_NONFLASH;

	auok1901_update_region(par, mode, 0, par->info->var.yres);
	par->update_cnt = 0;
	}

	static bool auok1901fb_need_refresh(struct auok190xfb_par *par)
	{
	return (par->update_cnt > 10);
	}

	static int auok1901fb_probe(struct platform_device *pdev)
	{
	struct auok190x_init_data init;
	struct auok190x_board *board;

	/* pick up board specific routines */
	board = pdev->dev.platform_data;
	if (!board)
	return -EINVAL;

	/* fill temporary init struct for common init */
	init.id = "auo_k1901fb";
	init.board = board;
	init.update_partial = auok1901fb_dpy_update_pages;
	init.update_all = auok1901fb_dpy_update;
	init.need_refresh = auok1901fb_need_refresh;
	init.init = auok1901_init;

	return auok190x_common_probe(pdev, &init);
	}

	static int auok1901fb_remove(struct platform_device *pdev)
	{
	return auok190x_common_remove(pdev);
	}

	static struct platform_driver auok1901fb_driver = {
	.probe = auok1901fb_probe,
	.remove = auok1901fb_remove,
	.driver = {
	.owner = THIS_MODULE,
	.name = "auo_k1901fb",
	.pm = &auok190x_pm,
	},
	};
	module_platform_driver(auok1901fb_driver);

	MODULE_DESCRIPTION("framebuffer driver for the AUO-K1901 EPD controller");
	MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
	MODULE_LICENSE("GPL");