| /************************************************************************************************** |
| * Procedure: Init boot code/firmware code/data session |
| * |
| * Description: This routine will initialize firmware. If any error occurs during the initialization |
| * process, the routine shall terminate immediately and return fail. |
| * NIC driver should call NdisOpenFile only from MiniportInitialize. |
| * |
| * Arguments: The pointer of the adapter |
| |
| * Returns: |
| * NDIS_STATUS_FAILURE - the following initialization process should be terminated |
| * NDIS_STATUS_SUCCESS - if firmware initialization process success |
| **************************************************************************************************/ |
| |
| #include "r8192U.h" |
| #include "r8192U_hw.h" |
| #include "r819xU_firmware_img.h" |
| #include "r819xU_firmware.h" |
| #include <linux/firmware.h> |
| |
| static void firmware_init_param(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| rt_firmware *pfirmware = priv->pFirmware; |
| |
| pfirmware->cmdpacket_frag_thresold = GET_COMMAND_PACKET_FRAG_THRESHOLD(MAX_TRANSMIT_BUFFER_SIZE); |
| } |
| |
| /* |
| * segment the img and use the ptr and length to remember info on each segment |
| * |
| */ |
| static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address, |
| u32 buffer_len) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| bool rt_status = true; |
| u16 frag_threshold; |
| u16 frag_length, frag_offset = 0; |
| //u16 total_size; |
| int i; |
| |
| rt_firmware *pfirmware = priv->pFirmware; |
| struct sk_buff *skb; |
| unsigned char *seg_ptr; |
| cb_desc *tcb_desc; |
| u8 bLastIniPkt; |
| |
| firmware_init_param(dev); |
| //Fragmentation might be required |
| frag_threshold = pfirmware->cmdpacket_frag_thresold; |
| do { |
| if ((buffer_len - frag_offset) > frag_threshold) { |
| frag_length = frag_threshold ; |
| bLastIniPkt = 0; |
| |
| } else { |
| frag_length = buffer_len - frag_offset; |
| bLastIniPkt = 1; |
| |
| } |
| |
| /* Allocate skb buffer to contain firmware info and tx descriptor info |
| * add 4 to avoid packet appending overflow. |
| * */ |
| skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4); |
| if (!skb) |
| return false; |
| memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev)); |
| tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE); |
| tcb_desc->queue_index = TXCMD_QUEUE; |
| tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT; |
| tcb_desc->bLastIniPkt = bLastIniPkt; |
| |
| skb_reserve(skb, USB_HWDESC_HEADER_LEN); |
| seg_ptr = skb->data; |
| /* |
| * Transform from little endian to big endian |
| * and pending zero |
| */ |
| for(i=0 ; i < frag_length; i+=4) { |
| *seg_ptr++ = ((i+0)<frag_length)?code_virtual_address[i+3]:0; |
| *seg_ptr++ = ((i+1)<frag_length)?code_virtual_address[i+2]:0; |
| *seg_ptr++ = ((i+2)<frag_length)?code_virtual_address[i+1]:0; |
| *seg_ptr++ = ((i+3)<frag_length)?code_virtual_address[i+0]:0; |
| } |
| tcb_desc->txbuf_size= (u16)i; |
| skb_put(skb, i); |
| |
| if (!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)|| |
| (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\ |
| (priv->ieee80211->queue_stop) ) { |
| RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n"); |
| skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb); |
| } else { |
| priv->ieee80211->softmac_hard_start_xmit(skb,dev); |
| } |
| |
| code_virtual_address += frag_length; |
| frag_offset += frag_length; |
| |
| }while(frag_offset < buffer_len); |
| |
| return rt_status; |
| |
| } |
| |
| bool |
| fwSendNullPacket( |
| struct net_device *dev, |
| u32 Length |
| ) |
| { |
| bool rtStatus = true; |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| struct sk_buff *skb; |
| cb_desc *tcb_desc; |
| unsigned char *ptr_buf; |
| bool bLastInitPacket = false; |
| |
| //PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK); |
| |
| //Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ) |
| skb = dev_alloc_skb(Length+ 4); |
| memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev)); |
| tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE); |
| tcb_desc->queue_index = TXCMD_QUEUE; |
| tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT; |
| tcb_desc->bLastIniPkt = bLastInitPacket; |
| ptr_buf = skb_put(skb, Length); |
| memset(ptr_buf,0,Length); |
| tcb_desc->txbuf_size= (u16)Length; |
| |
| if (!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)|| |
| (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\ |
| (priv->ieee80211->queue_stop) ) { |
| RT_TRACE(COMP_FIRMWARE,"===================NULL packet==================================> tx full!\n"); |
| skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb); |
| } else { |
| priv->ieee80211->softmac_hard_start_xmit(skb,dev); |
| } |
| |
| //PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK); |
| return rtStatus; |
| } |
| |
| |
| //----------------------------------------------------------------------------- |
| // Procedure: Check whether main code is download OK. If OK, turn on CPU |
| // |
| // Description: CPU register locates in different page against general register. |
| // Switch to CPU register in the begin and switch back before return |
| // |
| // |
| // Arguments: The pointer of the adapter |
| // |
| // Returns: |
| // NDIS_STATUS_FAILURE - the following initialization process should be terminated |
| // NDIS_STATUS_SUCCESS - if firmware initialization process success |
| //----------------------------------------------------------------------------- |
| static bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev) |
| { |
| bool rt_status = true; |
| int check_putcodeOK_time = 200000, check_bootOk_time = 200000; |
| u32 CPU_status = 0; |
| |
| /* Check whether put code OK */ |
| do { |
| read_nic_dword(dev, CPU_GEN, &CPU_status); |
| |
| if (CPU_status&CPU_GEN_PUT_CODE_OK) |
| break; |
| |
| }while(check_putcodeOK_time--); |
| |
| if (!(CPU_status&CPU_GEN_PUT_CODE_OK)) { |
| RT_TRACE(COMP_ERR, "Download Firmware: Put code fail!\n"); |
| goto CPUCheckMainCodeOKAndTurnOnCPU_Fail; |
| } else { |
| RT_TRACE(COMP_FIRMWARE, "Download Firmware: Put code ok!\n"); |
| } |
| |
| /* Turn On CPU */ |
| read_nic_dword(dev, CPU_GEN, &CPU_status); |
| write_nic_byte(dev, CPU_GEN, (u8)((CPU_status|CPU_GEN_PWR_STB_CPU)&0xff)); |
| mdelay(1000); |
| |
| /* Check whether CPU boot OK */ |
| do { |
| read_nic_dword(dev, CPU_GEN, &CPU_status); |
| |
| if (CPU_status&CPU_GEN_BOOT_RDY) |
| break; |
| }while(check_bootOk_time--); |
| |
| if (!(CPU_status&CPU_GEN_BOOT_RDY)) { |
| goto CPUCheckMainCodeOKAndTurnOnCPU_Fail; |
| } else { |
| RT_TRACE(COMP_FIRMWARE, "Download Firmware: Boot ready!\n"); |
| } |
| |
| return rt_status; |
| |
| CPUCheckMainCodeOKAndTurnOnCPU_Fail: |
| RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__); |
| rt_status = FALSE; |
| return rt_status; |
| } |
| |
| static bool CPUcheck_firmware_ready(struct net_device *dev) |
| { |
| |
| bool rt_status = true; |
| int check_time = 200000; |
| u32 CPU_status = 0; |
| |
| /* Check Firmware Ready */ |
| do { |
| read_nic_dword(dev, CPU_GEN, &CPU_status); |
| |
| if (CPU_status&CPU_GEN_FIRM_RDY) |
| break; |
| |
| }while(check_time--); |
| |
| if (!(CPU_status&CPU_GEN_FIRM_RDY)) |
| goto CPUCheckFirmwareReady_Fail; |
| else |
| RT_TRACE(COMP_FIRMWARE, "Download Firmware: Firmware ready!\n"); |
| |
| return rt_status; |
| |
| CPUCheckFirmwareReady_Fail: |
| RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__); |
| rt_status = false; |
| return rt_status; |
| |
| } |
| |
| bool init_firmware(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| bool rt_status = TRUE; |
| |
| u32 file_length = 0; |
| u8 *mapped_file = NULL; |
| u32 init_step = 0; |
| opt_rst_type_e rst_opt = OPT_SYSTEM_RESET; |
| firmware_init_step_e starting_state = FW_INIT_STEP0_BOOT; |
| |
| rt_firmware *pfirmware = priv->pFirmware; |
| const struct firmware *fw_entry; |
| const char *fw_name[3] = { "RTL8192U/boot.img", |
| "RTL8192U/main.img", |
| "RTL8192U/data.img"}; |
| int rc; |
| |
| RT_TRACE(COMP_FIRMWARE, " PlatformInitFirmware()==>\n"); |
| |
| if (pfirmware->firmware_status == FW_STATUS_0_INIT ) { |
| /* it is called by reset */ |
| rst_opt = OPT_SYSTEM_RESET; |
| starting_state = FW_INIT_STEP0_BOOT; |
| // TODO: system reset |
| |
| }else if (pfirmware->firmware_status == FW_STATUS_5_READY) { |
| /* it is called by Initialize */ |
| rst_opt = OPT_FIRMWARE_RESET; |
| starting_state = FW_INIT_STEP2_DATA; |
| }else { |
| RT_TRACE(COMP_FIRMWARE, "PlatformInitFirmware: undefined firmware state\n"); |
| } |
| |
| /* |
| * Download boot, main, and data image for System reset. |
| * Download data image for firmware reset |
| */ |
| for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) { |
| /* |
| * Open image file, and map file to continuous memory if open file success. |
| * or read image file from array. Default load from IMG file |
| */ |
| if (rst_opt == OPT_SYSTEM_RESET) { |
| rc = request_firmware(&fw_entry, fw_name[init_step],&priv->udev->dev); |
| if (rc < 0 ) { |
| RT_TRACE(COMP_ERR, "request firmware fail!\n"); |
| goto download_firmware_fail; |
| } |
| |
| if (fw_entry->size > sizeof(pfirmware->firmware_buf)) { |
| RT_TRACE(COMP_ERR, "img file size exceed the container buffer fail!\n"); |
| goto download_firmware_fail; |
| } |
| |
| if (init_step != FW_INIT_STEP1_MAIN) { |
| memcpy(pfirmware->firmware_buf,fw_entry->data,fw_entry->size); |
| mapped_file = pfirmware->firmware_buf; |
| file_length = fw_entry->size; |
| } else { |
| memset(pfirmware->firmware_buf,0,128); |
| memcpy(&pfirmware->firmware_buf[128],fw_entry->data,fw_entry->size); |
| mapped_file = pfirmware->firmware_buf; |
| file_length = fw_entry->size + 128; |
| } |
| pfirmware->firmware_buf_size = file_length; |
| }else if (rst_opt == OPT_FIRMWARE_RESET ) { |
| /* we only need to download data.img here */ |
| mapped_file = pfirmware->firmware_buf; |
| file_length = pfirmware->firmware_buf_size; |
| } |
| |
| /* Download image file */ |
| /* The firmware download process is just as following, |
| * 1. that is each packet will be segmented and inserted to the wait queue. |
| * 2. each packet segment will be put in the skb_buff packet. |
| * 3. each skb_buff packet data content will already include the firmware info |
| * and Tx descriptor info |
| * */ |
| rt_status = fw_download_code(dev,mapped_file,file_length); |
| if (rst_opt == OPT_SYSTEM_RESET) { |
| release_firmware(fw_entry); |
| } |
| |
| if (rt_status != TRUE) { |
| goto download_firmware_fail; |
| } |
| |
| switch (init_step) { |
| case FW_INIT_STEP0_BOOT: |
| /* Download boot |
| * initialize command descriptor. |
| * will set polling bit when firmware code is also configured |
| */ |
| pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE; |
| //mdelay(1000); |
| /* |
| * To initialize IMEM, CPU move code from 0x80000080, |
| * hence, we send 0x80 byte packet |
| */ |
| break; |
| |
| case FW_INIT_STEP1_MAIN: |
| /* Download firmware code. Wait until Boot Ready and Turn on CPU */ |
| pfirmware->firmware_status = FW_STATUS_2_MOVE_MAIN_CODE; |
| |
| /* Check Put Code OK and Turn On CPU */ |
| rt_status = CPUcheck_maincodeok_turnonCPU(dev); |
| if (rt_status != TRUE) { |
| RT_TRACE(COMP_ERR, "CPUcheck_maincodeok_turnonCPU fail!\n"); |
| goto download_firmware_fail; |
| } |
| |
| pfirmware->firmware_status = FW_STATUS_3_TURNON_CPU; |
| break; |
| |
| case FW_INIT_STEP2_DATA: |
| /* download initial data code */ |
| pfirmware->firmware_status = FW_STATUS_4_MOVE_DATA_CODE; |
| mdelay(1); |
| |
| rt_status = CPUcheck_firmware_ready(dev); |
| if (rt_status != TRUE) { |
| RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n",rt_status); |
| goto download_firmware_fail; |
| } |
| |
| /* wait until data code is initialized ready.*/ |
| pfirmware->firmware_status = FW_STATUS_5_READY; |
| break; |
| } |
| } |
| |
| RT_TRACE(COMP_FIRMWARE, "Firmware Download Success\n"); |
| //assert(pfirmware->firmware_status == FW_STATUS_5_READY, ("Firmware Download Fail\n")); |
| |
| return rt_status; |
| |
| download_firmware_fail: |
| RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__); |
| rt_status = FALSE; |
| return rt_status; |
| |
| } |
| |
| MODULE_FIRMWARE("RTL8192U/boot.img"); |
| MODULE_FIRMWARE("RTL8192U/main.img"); |
| MODULE_FIRMWARE("RTL8192U/data.img"); |