| /* |
| * Copyright (c) 2013-2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) "bw-hwmon: " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/sizes.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/ktime.h> |
| #include <linux/time.h> |
| #include <linux/err.h> |
| #include <linux/errno.h> |
| #include <linux/mutex.h> |
| #include <linux/interrupt.h> |
| #include <linux/spinlock.h> |
| #include <linux/platform_device.h> |
| #include <linux/of.h> |
| #include <linux/devfreq.h> |
| #include <trace/events/power.h> |
| #include "governor.h" |
| #include "governor_bw_hwmon.h" |
| |
| #define NUM_MBPS_ZONES 10 |
| struct hwmon_node { |
| unsigned int guard_band_mbps; |
| unsigned int decay_rate; |
| unsigned int io_percent; |
| unsigned int bw_step; |
| unsigned int sample_ms; |
| unsigned int up_scale; |
| unsigned int up_thres; |
| unsigned int down_thres; |
| unsigned int down_count; |
| unsigned int hist_memory; |
| unsigned int hyst_trigger_count; |
| unsigned int hyst_length; |
| unsigned int idle_mbps; |
| unsigned int low_power_ceil_mbps; |
| unsigned int low_power_io_percent; |
| unsigned int low_power_delay; |
| unsigned int mbps_zones[NUM_MBPS_ZONES]; |
| |
| unsigned long prev_ab; |
| unsigned long *dev_ab; |
| unsigned long resume_freq; |
| unsigned long resume_ab; |
| unsigned long bytes; |
| unsigned long max_mbps; |
| unsigned long hist_max_mbps; |
| unsigned long hist_mem; |
| unsigned long hyst_peak; |
| unsigned long hyst_mbps; |
| unsigned long hyst_trig_win; |
| unsigned long hyst_en; |
| unsigned long above_low_power; |
| unsigned long prev_req; |
| unsigned int wake; |
| unsigned int down_cnt; |
| ktime_t prev_ts; |
| ktime_t hist_max_ts; |
| bool sampled; |
| bool mon_started; |
| struct list_head list; |
| void *orig_data; |
| struct bw_hwmon *hw; |
| struct devfreq_governor *gov; |
| struct attribute_group *attr_grp; |
| }; |
| |
| #define UP_WAKE 1 |
| #define DOWN_WAKE 2 |
| static DEFINE_SPINLOCK(irq_lock); |
| |
| static LIST_HEAD(hwmon_list); |
| static DEFINE_MUTEX(list_lock); |
| |
| static int use_cnt; |
| static DEFINE_MUTEX(state_lock); |
| |
| #define show_attr(name) \ |
| static ssize_t show_##name(struct device *dev, \ |
| struct device_attribute *attr, char *buf) \ |
| { \ |
| struct devfreq *df = to_devfreq(dev); \ |
| struct hwmon_node *hw = df->data; \ |
| return snprintf(buf, PAGE_SIZE, "%u\n", hw->name); \ |
| } |
| |
| #define store_attr(name, _min, _max) \ |
| static ssize_t store_##name(struct device *dev, \ |
| struct device_attribute *attr, const char *buf, \ |
| size_t count) \ |
| { \ |
| struct devfreq *df = to_devfreq(dev); \ |
| struct hwmon_node *hw = df->data; \ |
| int ret; \ |
| unsigned int val; \ |
| ret = kstrtoint(buf, 10, &val); \ |
| if (ret) \ |
| return ret; \ |
| val = max(val, _min); \ |
| val = min(val, _max); \ |
| hw->name = val; \ |
| return count; \ |
| } |
| |
| #define gov_attr(__attr, min, max) \ |
| show_attr(__attr) \ |
| store_attr(__attr, (min), (max)) \ |
| static DEVICE_ATTR(__attr, 0644, show_##__attr, store_##__attr) |
| |
| #define show_list_attr(name, n) \ |
| static ssize_t show_list_##name(struct device *dev, \ |
| struct device_attribute *attr, char *buf) \ |
| { \ |
| struct devfreq *df = to_devfreq(dev); \ |
| struct hwmon_node *hw = df->data; \ |
| unsigned int i, cnt = 0; \ |
| \ |
| for (i = 0; i < n && hw->name[i]; i++) \ |
| cnt += snprintf(buf + cnt, PAGE_SIZE, "%u ", hw->name[i]);\ |
| cnt += snprintf(buf + cnt, PAGE_SIZE, "\n"); \ |
| return cnt; \ |
| } |
| |
| #define store_list_attr(name, n, _min, _max) \ |
| static ssize_t store_list_##name(struct device *dev, \ |
| struct device_attribute *attr, const char *buf, \ |
| size_t count) \ |
| { \ |
| struct devfreq *df = to_devfreq(dev); \ |
| struct hwmon_node *hw = df->data; \ |
| int ret, numvals; \ |
| unsigned int i = 0, val; \ |
| char **strlist; \ |
| \ |
| strlist = argv_split(GFP_KERNEL, buf, &numvals); \ |
| if (!strlist) \ |
| return -ENOMEM; \ |
| numvals = min(numvals, n - 1); \ |
| for (i = 0; i < numvals; i++) { \ |
| ret = kstrtouint(strlist[i], 10, &val); \ |
| if (ret) \ |
| goto out; \ |
| val = max(val, _min); \ |
| val = min(val, _max); \ |
| hw->name[i] = val; \ |
| } \ |
| ret = count; \ |
| out: \ |
| argv_free(strlist); \ |
| hw->name[i] = 0; \ |
| return ret; \ |
| } |
| |
| #define gov_list_attr(__attr, n, min, max) \ |
| show_list_attr(__attr, n) \ |
| store_list_attr(__attr, n, (min), (max)) \ |
| static DEVICE_ATTR(__attr, 0644, show_list_##__attr, store_list_##__attr) |
| |
| #define MIN_MS 10U |
| #define MAX_MS 500U |
| |
| /* Returns MBps of read/writes for the sampling window. */ |
| static unsigned int bytes_to_mbps(long long bytes, unsigned int us) |
| { |
| bytes *= USEC_PER_SEC; |
| do_div(bytes, us); |
| bytes = DIV_ROUND_UP_ULL(bytes, SZ_1M); |
| return bytes; |
| } |
| |
| static unsigned int mbps_to_bytes(unsigned long mbps, unsigned int ms) |
| { |
| mbps *= ms; |
| mbps = DIV_ROUND_UP(mbps, MSEC_PER_SEC); |
| mbps *= SZ_1M; |
| return mbps; |
| } |
| |
| static int __bw_hwmon_sw_sample_end(struct bw_hwmon *hwmon) |
| { |
| struct devfreq *df; |
| struct hwmon_node *node; |
| ktime_t ts; |
| unsigned long bytes, mbps; |
| unsigned int us; |
| int wake = 0; |
| |
| df = hwmon->df; |
| node = df->data; |
| |
| ts = ktime_get(); |
| us = ktime_to_us(ktime_sub(ts, node->prev_ts)); |
| |
| bytes = hwmon->get_bytes_and_clear(hwmon); |
| bytes += node->bytes; |
| node->bytes = 0; |
| |
| mbps = bytes_to_mbps(bytes, us); |
| node->max_mbps = max(node->max_mbps, mbps); |
| |
| /* |
| * If the measured bandwidth in a micro sample is greater than the |
| * wake up threshold, it indicates an increase in load that's non |
| * trivial. So, have the governor ignore historical idle time or low |
| * bandwidth usage and do the bandwidth calculation based on just |
| * this micro sample. |
| */ |
| if (mbps > node->hw->up_wake_mbps) { |
| wake = UP_WAKE; |
| } else if (mbps < node->hw->down_wake_mbps) { |
| if (node->down_cnt) |
| node->down_cnt--; |
| if (node->down_cnt <= 0) |
| wake = DOWN_WAKE; |
| } |
| |
| node->prev_ts = ts; |
| node->wake = wake; |
| node->sampled = true; |
| |
| trace_bw_hwmon_meas(dev_name(df->dev.parent), |
| mbps, |
| us, |
| wake); |
| |
| return wake; |
| } |
| |
| static int __bw_hwmon_hw_sample_end(struct bw_hwmon *hwmon) |
| { |
| struct devfreq *df; |
| struct hwmon_node *node; |
| unsigned long bytes, mbps; |
| int wake = 0; |
| |
| df = hwmon->df; |
| node = df->data; |
| |
| /* |
| * If this read is in response to an IRQ, the HW monitor should |
| * return the measurement in the micro sample that triggered the IRQ. |
| * Otherwise, it should return the maximum measured value in any |
| * micro sample since the last time we called get_bytes_and_clear() |
| */ |
| bytes = hwmon->get_bytes_and_clear(hwmon); |
| mbps = bytes_to_mbps(bytes, node->sample_ms * USEC_PER_MSEC); |
| node->max_mbps = mbps; |
| |
| if (mbps > node->hw->up_wake_mbps) |
| wake = UP_WAKE; |
| else if (mbps < node->hw->down_wake_mbps) |
| wake = DOWN_WAKE; |
| |
| node->wake = wake; |
| node->sampled = true; |
| |
| trace_bw_hwmon_meas(dev_name(df->dev.parent), |
| mbps, |
| node->sample_ms * USEC_PER_MSEC, |
| wake); |
| |
| return 1; |
| } |
| |
| static int __bw_hwmon_sample_end(struct bw_hwmon *hwmon) |
| { |
| if (hwmon->set_hw_events) |
| return __bw_hwmon_hw_sample_end(hwmon); |
| else |
| return __bw_hwmon_sw_sample_end(hwmon); |
| } |
| |
| int bw_hwmon_sample_end(struct bw_hwmon *hwmon) |
| { |
| unsigned long flags; |
| int wake; |
| |
| spin_lock_irqsave(&irq_lock, flags); |
| wake = __bw_hwmon_sample_end(hwmon); |
| spin_unlock_irqrestore(&irq_lock, flags); |
| |
| return wake; |
| } |
| |
| unsigned long to_mbps_zone(struct hwmon_node *node, unsigned long mbps) |
| { |
| int i; |
| |
| for (i = 0; i < NUM_MBPS_ZONES && node->mbps_zones[i]; i++) |
| if (node->mbps_zones[i] >= mbps) |
| return node->mbps_zones[i]; |
| |
| return node->hw->df->max_freq; |
| } |
| |
| #define MIN_MBPS 500UL |
| #define HIST_PEAK_TOL 60 |
| static unsigned long get_bw_and_set_irq(struct hwmon_node *node, |
| unsigned long *freq, unsigned long *ab) |
| { |
| unsigned long meas_mbps, thres, flags, req_mbps, adj_mbps; |
| unsigned long meas_mbps_zone; |
| unsigned long hist_lo_tol, hyst_lo_tol; |
| struct bw_hwmon *hw = node->hw; |
| unsigned int new_bw, io_percent; |
| ktime_t ts; |
| unsigned int ms = 0; |
| |
| spin_lock_irqsave(&irq_lock, flags); |
| |
| if (!hw->set_hw_events) { |
| ts = ktime_get(); |
| ms = ktime_to_ms(ktime_sub(ts, node->prev_ts)); |
| } |
| if (!node->sampled || ms >= node->sample_ms) |
| __bw_hwmon_sample_end(node->hw); |
| node->sampled = false; |
| |
| req_mbps = meas_mbps = node->max_mbps; |
| node->max_mbps = 0; |
| |
| hist_lo_tol = (node->hist_max_mbps * HIST_PEAK_TOL) / 100; |
| /* Remember historic peak in the past hist_mem decision windows. */ |
| if (meas_mbps > node->hist_max_mbps || !node->hist_mem) { |
| /* If new max or no history */ |
| node->hist_max_mbps = meas_mbps; |
| node->hist_mem = node->hist_memory; |
| } else if (meas_mbps >= hist_lo_tol) { |
| /* |
| * If subsequent peaks come close (within tolerance) to but |
| * less than the historic peak, then reset the history start, |
| * but not the peak value. |
| */ |
| node->hist_mem = node->hist_memory; |
| } else { |
| /* Count down history expiration. */ |
| if (node->hist_mem) |
| node->hist_mem--; |
| } |
| |
| /* Keep track of whether we are in low power mode consistently. */ |
| if (meas_mbps > node->low_power_ceil_mbps) |
| node->above_low_power = node->low_power_delay; |
| if (node->above_low_power) |
| node->above_low_power--; |
| |
| if (node->above_low_power) |
| io_percent = node->io_percent; |
| else |
| io_percent = node->low_power_io_percent; |
| |
| /* |
| * The AB value that corresponds to the lowest mbps zone greater than |
| * or equal to the "frequency" the current measurement will pick. |
| * This upper limit is useful for balancing out any prediction |
| * mechanisms to be power friendly. |
| */ |
| meas_mbps_zone = (meas_mbps * 100) / io_percent; |
| meas_mbps_zone = to_mbps_zone(node, meas_mbps_zone); |
| meas_mbps_zone = (meas_mbps_zone * io_percent) / 100; |
| meas_mbps_zone = max(meas_mbps, meas_mbps_zone); |
| |
| /* |
| * If this is a wake up due to BW increase, vote much higher BW than |
| * what we measure to stay ahead of increasing traffic and then set |
| * it up to vote for measured BW if we see down_count short sample |
| * windows of low traffic. |
| */ |
| if (node->wake == UP_WAKE) { |
| req_mbps += ((meas_mbps - node->prev_req) |
| * node->up_scale) / 100; |
| /* |
| * However if the measured load is less than the historic |
| * peak, but the over request is higher than the historic |
| * peak, then we could limit the over requesting to the |
| * historic peak. |
| */ |
| if (req_mbps > node->hist_max_mbps |
| && meas_mbps < node->hist_max_mbps) |
| req_mbps = node->hist_max_mbps; |
| |
| req_mbps = min(req_mbps, meas_mbps_zone); |
| } |
| |
| hyst_lo_tol = (node->hyst_mbps * HIST_PEAK_TOL) / 100; |
| if (meas_mbps > node->hyst_mbps && meas_mbps > MIN_MBPS) { |
| hyst_lo_tol = (meas_mbps * HIST_PEAK_TOL) / 100; |
| node->hyst_peak = 0; |
| node->hyst_trig_win = node->hyst_length; |
| node->hyst_mbps = meas_mbps; |
| } |
| |
| /* |
| * Check node->max_mbps to avoid double counting peaks that cause |
| * early termination of a window. |
| */ |
| if (meas_mbps >= hyst_lo_tol && meas_mbps > MIN_MBPS |
| && !node->max_mbps) { |
| node->hyst_peak++; |
| if (node->hyst_peak >= node->hyst_trigger_count |
| || node->hyst_en) |
| node->hyst_en = node->hyst_length; |
| } |
| |
| if (node->hyst_trig_win) |
| node->hyst_trig_win--; |
| if (node->hyst_en) |
| node->hyst_en--; |
| |
| if (!node->hyst_trig_win && !node->hyst_en) { |
| node->hyst_peak = 0; |
| node->hyst_mbps = 0; |
| } |
| |
| if (node->hyst_en) { |
| if (meas_mbps > node->idle_mbps) |
| req_mbps = max(req_mbps, node->hyst_mbps); |
| } |
| |
| /* Stretch the short sample window size, if the traffic is too low */ |
| if (meas_mbps < MIN_MBPS) { |
| hw->up_wake_mbps = (max(MIN_MBPS, req_mbps) |
| * (100 + node->up_thres)) / 100; |
| hw->down_wake_mbps = 0; |
| hw->undo_over_req_mbps = 0; |
| thres = mbps_to_bytes(max(MIN_MBPS, req_mbps / 2), |
| node->sample_ms); |
| } else { |
| /* |
| * Up wake vs down wake are intentionally a percentage of |
| * req_mbps vs meas_mbps to make sure the over requesting |
| * phase is handled properly. We only want to wake up and |
| * reduce the vote based on the measured mbps being less than |
| * the previous measurement that caused the "over request". |
| */ |
| hw->up_wake_mbps = (req_mbps * (100 + node->up_thres)) / 100; |
| hw->down_wake_mbps = (meas_mbps * node->down_thres) / 100; |
| if (node->wake == UP_WAKE) |
| hw->undo_over_req_mbps = min(req_mbps, meas_mbps_zone); |
| else |
| hw->undo_over_req_mbps = 0; |
| thres = mbps_to_bytes(meas_mbps, node->sample_ms); |
| } |
| |
| if (hw->set_hw_events) { |
| hw->down_cnt = node->down_count; |
| hw->set_hw_events(hw, node->sample_ms); |
| } else { |
| node->down_cnt = node->down_count; |
| node->bytes = hw->set_thres(hw, thres); |
| } |
| |
| node->wake = 0; |
| node->prev_req = req_mbps; |
| |
| spin_unlock_irqrestore(&irq_lock, flags); |
| |
| adj_mbps = req_mbps + node->guard_band_mbps; |
| |
| if (adj_mbps > node->prev_ab) { |
| new_bw = adj_mbps; |
| } else { |
| new_bw = adj_mbps * node->decay_rate |
| + node->prev_ab * (100 - node->decay_rate); |
| new_bw /= 100; |
| } |
| |
| node->prev_ab = new_bw; |
| if (ab) |
| *ab = roundup(new_bw, node->bw_step); |
| |
| *freq = (new_bw * 100) / io_percent; |
| trace_bw_hwmon_update(dev_name(node->hw->df->dev.parent), |
| new_bw, |
| *freq, |
| hw->up_wake_mbps, |
| hw->down_wake_mbps); |
| return req_mbps; |
| } |
| |
| static struct hwmon_node *find_hwmon_node(struct devfreq *df) |
| { |
| struct hwmon_node *node, *found = NULL; |
| |
| mutex_lock(&list_lock); |
| list_for_each_entry(node, &hwmon_list, list) |
| if (node->hw->dev == df->dev.parent || |
| node->hw->of_node == df->dev.parent->of_node || |
| (!node->hw->dev && !node->hw->of_node && |
| node->gov == df->governor)) { |
| found = node; |
| break; |
| } |
| mutex_unlock(&list_lock); |
| |
| return found; |
| } |
| |
| int update_bw_hwmon(struct bw_hwmon *hwmon) |
| { |
| struct devfreq *df; |
| struct hwmon_node *node; |
| int ret; |
| |
| if (!hwmon) |
| return -EINVAL; |
| df = hwmon->df; |
| if (!df) |
| return -ENODEV; |
| node = df->data; |
| if (!node) |
| return -ENODEV; |
| |
| if (!node->mon_started) |
| return -EBUSY; |
| |
| dev_dbg(df->dev.parent, "Got update request\n"); |
| devfreq_monitor_stop(df); |
| |
| mutex_lock(&df->lock); |
| ret = update_devfreq(df); |
| if (ret) |
| dev_err(df->dev.parent, |
| "Unable to update freq on request!\n"); |
| mutex_unlock(&df->lock); |
| |
| devfreq_monitor_start(df); |
| |
| return 0; |
| } |
| |
| static int start_monitor(struct devfreq *df, bool init) |
| { |
| struct hwmon_node *node = df->data; |
| struct bw_hwmon *hw = node->hw; |
| struct device *dev = df->dev.parent; |
| unsigned long mbps; |
| int ret; |
| |
| node->prev_ts = ktime_get(); |
| |
| if (init) { |
| node->prev_ab = 0; |
| node->resume_freq = 0; |
| node->resume_ab = 0; |
| mbps = (df->previous_freq * node->io_percent) / 100; |
| hw->up_wake_mbps = mbps; |
| hw->down_wake_mbps = MIN_MBPS; |
| hw->undo_over_req_mbps = 0; |
| ret = hw->start_hwmon(hw, mbps); |
| } else { |
| ret = hw->resume_hwmon(hw); |
| } |
| |
| if (ret) { |
| dev_err(dev, "Unable to start HW monitor! (%d)\n", ret); |
| return ret; |
| } |
| |
| if (init) |
| devfreq_monitor_start(df); |
| else |
| devfreq_monitor_resume(df); |
| |
| node->mon_started = true; |
| |
| return 0; |
| } |
| |
| static void stop_monitor(struct devfreq *df, bool init) |
| { |
| struct hwmon_node *node = df->data; |
| struct bw_hwmon *hw = node->hw; |
| |
| node->mon_started = false; |
| |
| if (init) { |
| devfreq_monitor_stop(df); |
| hw->stop_hwmon(hw); |
| } else { |
| devfreq_monitor_suspend(df); |
| hw->suspend_hwmon(hw); |
| } |
| |
| } |
| |
| static int gov_start(struct devfreq *df) |
| { |
| int ret = 0; |
| struct device *dev = df->dev.parent; |
| struct hwmon_node *node; |
| struct bw_hwmon *hw; |
| struct devfreq_dev_status stat; |
| |
| node = find_hwmon_node(df); |
| if (!node) { |
| dev_err(dev, "Unable to find HW monitor!\n"); |
| return -ENODEV; |
| } |
| hw = node->hw; |
| |
| stat.private_data = NULL; |
| if (df->profile->get_dev_status) |
| ret = df->profile->get_dev_status(df->dev.parent, &stat); |
| if (ret || !stat.private_data) |
| dev_warn(dev, "Device doesn't take AB votes!\n"); |
| else |
| node->dev_ab = stat.private_data; |
| |
| hw->df = df; |
| node->orig_data = df->data; |
| df->data = node; |
| |
| if (start_monitor(df, true)) |
| goto err_start; |
| |
| ret = sysfs_create_group(&df->dev.kobj, node->attr_grp); |
| if (ret) |
| goto err_sysfs; |
| |
| return 0; |
| |
| err_sysfs: |
| stop_monitor(df, true); |
| err_start: |
| df->data = node->orig_data; |
| node->orig_data = NULL; |
| hw->df = NULL; |
| node->dev_ab = NULL; |
| return ret; |
| } |
| |
| static void gov_stop(struct devfreq *df) |
| { |
| struct hwmon_node *node = df->data; |
| struct bw_hwmon *hw = node->hw; |
| |
| sysfs_remove_group(&df->dev.kobj, node->attr_grp); |
| stop_monitor(df, true); |
| df->data = node->orig_data; |
| node->orig_data = NULL; |
| hw->df = NULL; |
| /* |
| * Not all governors know about this additional extended device |
| * configuration. To avoid leaving the extended configuration at a |
| * stale state, set it to 0 and let the next governor take it from |
| * there. |
| */ |
| if (node->dev_ab) |
| *node->dev_ab = 0; |
| node->dev_ab = NULL; |
| } |
| |
| static int gov_suspend(struct devfreq *df) |
| { |
| struct hwmon_node *node = df->data; |
| unsigned long resume_freq = df->previous_freq; |
| unsigned long resume_ab = *node->dev_ab; |
| |
| if (!node->hw->suspend_hwmon) |
| return -ENOSYS; |
| |
| if (node->resume_freq) { |
| dev_warn(df->dev.parent, "Governor already suspended!\n"); |
| return -EBUSY; |
| } |
| |
| stop_monitor(df, false); |
| |
| mutex_lock(&df->lock); |
| update_devfreq(df); |
| mutex_unlock(&df->lock); |
| |
| node->resume_freq = resume_freq; |
| node->resume_ab = resume_ab; |
| |
| return 0; |
| } |
| |
| static int gov_resume(struct devfreq *df) |
| { |
| struct hwmon_node *node = df->data; |
| |
| if (!node->hw->resume_hwmon) |
| return -ENOSYS; |
| |
| if (!node->resume_freq) { |
| dev_warn(df->dev.parent, "Governor already resumed!\n"); |
| return -EBUSY; |
| } |
| |
| mutex_lock(&df->lock); |
| update_devfreq(df); |
| mutex_unlock(&df->lock); |
| |
| node->resume_freq = 0; |
| node->resume_ab = 0; |
| |
| return start_monitor(df, false); |
| } |
| |
| static int devfreq_bw_hwmon_get_freq(struct devfreq *df, |
| unsigned long *freq) |
| { |
| struct hwmon_node *node = df->data; |
| |
| /* Suspend/resume sequence */ |
| if (!node->mon_started) { |
| *freq = node->resume_freq; |
| *node->dev_ab = node->resume_ab; |
| return 0; |
| } |
| |
| get_bw_and_set_irq(node, freq, node->dev_ab); |
| |
| return 0; |
| } |
| |
| static ssize_t store_throttle_adj(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct devfreq *df = to_devfreq(dev); |
| struct hwmon_node *node = df->data; |
| int ret; |
| unsigned int val; |
| |
| if (!node->hw->set_throttle_adj) |
| return -ENOSYS; |
| |
| ret = kstrtouint(buf, 10, &val); |
| if (ret) |
| return ret; |
| |
| ret = node->hw->set_throttle_adj(node->hw, val); |
| |
| if (!ret) |
| return count; |
| else |
| return ret; |
| } |
| |
| static ssize_t show_throttle_adj(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct devfreq *df = to_devfreq(dev); |
| struct hwmon_node *node = df->data; |
| unsigned int val; |
| |
| if (!node->hw->get_throttle_adj) |
| val = 0; |
| else |
| val = node->hw->get_throttle_adj(node->hw); |
| |
| return snprintf(buf, PAGE_SIZE, "%u\n", val); |
| } |
| |
| static DEVICE_ATTR(throttle_adj, 0644, show_throttle_adj, |
| store_throttle_adj); |
| |
| gov_attr(guard_band_mbps, 0U, 2000U); |
| gov_attr(decay_rate, 0U, 100U); |
| gov_attr(io_percent, 1U, 100U); |
| gov_attr(bw_step, 50U, 1000U); |
| gov_attr(sample_ms, 1U, 50U); |
| gov_attr(up_scale, 0U, 500U); |
| gov_attr(up_thres, 1U, 100U); |
| gov_attr(down_thres, 0U, 90U); |
| gov_attr(down_count, 0U, 90U); |
| gov_attr(hist_memory, 0U, 90U); |
| gov_attr(hyst_trigger_count, 0U, 90U); |
| gov_attr(hyst_length, 0U, 90U); |
| gov_attr(idle_mbps, 0U, 2000U); |
| gov_attr(low_power_ceil_mbps, 0U, 2500U); |
| gov_attr(low_power_io_percent, 1U, 100U); |
| gov_attr(low_power_delay, 1U, 60U); |
| gov_list_attr(mbps_zones, NUM_MBPS_ZONES, 0U, UINT_MAX); |
| |
| static struct attribute *dev_attr[] = { |
| &dev_attr_guard_band_mbps.attr, |
| &dev_attr_decay_rate.attr, |
| &dev_attr_io_percent.attr, |
| &dev_attr_bw_step.attr, |
| &dev_attr_sample_ms.attr, |
| &dev_attr_up_scale.attr, |
| &dev_attr_up_thres.attr, |
| &dev_attr_down_thres.attr, |
| &dev_attr_down_count.attr, |
| &dev_attr_hist_memory.attr, |
| &dev_attr_hyst_trigger_count.attr, |
| &dev_attr_hyst_length.attr, |
| &dev_attr_idle_mbps.attr, |
| &dev_attr_low_power_ceil_mbps.attr, |
| &dev_attr_low_power_io_percent.attr, |
| &dev_attr_low_power_delay.attr, |
| &dev_attr_mbps_zones.attr, |
| &dev_attr_throttle_adj.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group dev_attr_group = { |
| .name = "bw_hwmon", |
| .attrs = dev_attr, |
| }; |
| |
| static int devfreq_bw_hwmon_ev_handler(struct devfreq *df, |
| unsigned int event, void *data) |
| { |
| int ret = 0; |
| unsigned int sample_ms; |
| struct hwmon_node *node; |
| struct bw_hwmon *hw; |
| |
| mutex_lock(&state_lock); |
| |
| switch (event) { |
| case DEVFREQ_GOV_START: |
| sample_ms = df->profile->polling_ms; |
| sample_ms = max(MIN_MS, sample_ms); |
| sample_ms = min(MAX_MS, sample_ms); |
| df->profile->polling_ms = sample_ms; |
| |
| ret = gov_start(df); |
| if (ret) |
| goto out; |
| |
| dev_dbg(df->dev.parent, |
| "Enabled dev BW HW monitor governor\n"); |
| break; |
| |
| case DEVFREQ_GOV_STOP: |
| gov_stop(df); |
| dev_dbg(df->dev.parent, |
| "Disabled dev BW HW monitor governor\n"); |
| break; |
| |
| case DEVFREQ_GOV_INTERVAL: |
| sample_ms = *(unsigned int *)data; |
| sample_ms = max(MIN_MS, sample_ms); |
| sample_ms = min(MAX_MS, sample_ms); |
| /* |
| * Suspend/resume the HW monitor around the interval update |
| * to prevent the HW monitor IRQ from trying to change |
| * stop/start the delayed workqueue while the interval update |
| * is happening. |
| */ |
| node = df->data; |
| hw = node->hw; |
| hw->suspend_hwmon(hw); |
| devfreq_interval_update(df, &sample_ms); |
| ret = hw->resume_hwmon(hw); |
| if (ret) { |
| dev_err(df->dev.parent, |
| "Unable to resume HW monitor (%d)\n", ret); |
| goto out; |
| } |
| break; |
| |
| case DEVFREQ_GOV_SUSPEND: |
| ret = gov_suspend(df); |
| if (ret) { |
| dev_err(df->dev.parent, |
| "Unable to suspend BW HW mon governor (%d)\n", |
| ret); |
| goto out; |
| } |
| |
| dev_dbg(df->dev.parent, "Suspended BW HW mon governor\n"); |
| break; |
| |
| case DEVFREQ_GOV_RESUME: |
| ret = gov_resume(df); |
| if (ret) { |
| dev_err(df->dev.parent, |
| "Unable to resume BW HW mon governor (%d)\n", |
| ret); |
| goto out; |
| } |
| |
| dev_dbg(df->dev.parent, "Resumed BW HW mon governor\n"); |
| break; |
| } |
| |
| out: |
| mutex_unlock(&state_lock); |
| |
| return ret; |
| } |
| |
| static struct devfreq_governor devfreq_gov_bw_hwmon = { |
| .name = "bw_hwmon", |
| .get_target_freq = devfreq_bw_hwmon_get_freq, |
| .event_handler = devfreq_bw_hwmon_ev_handler, |
| }; |
| |
| int register_bw_hwmon(struct device *dev, struct bw_hwmon *hwmon) |
| { |
| int ret = 0; |
| struct hwmon_node *node; |
| struct attribute_group *attr_grp; |
| |
| if (!hwmon->gov && !hwmon->dev && !hwmon->of_node) |
| return -EINVAL; |
| |
| node = devm_kzalloc(dev, sizeof(*node), GFP_KERNEL); |
| if (!node) |
| return -ENOMEM; |
| |
| if (hwmon->gov) { |
| attr_grp = devm_kzalloc(dev, sizeof(*attr_grp), GFP_KERNEL); |
| if (!attr_grp) |
| return -ENOMEM; |
| |
| hwmon->gov->get_target_freq = devfreq_bw_hwmon_get_freq; |
| hwmon->gov->event_handler = devfreq_bw_hwmon_ev_handler; |
| attr_grp->name = hwmon->gov->name; |
| attr_grp->attrs = dev_attr; |
| |
| node->gov = hwmon->gov; |
| node->attr_grp = attr_grp; |
| } else { |
| node->gov = &devfreq_gov_bw_hwmon; |
| node->attr_grp = &dev_attr_group; |
| } |
| |
| node->guard_band_mbps = 100; |
| node->decay_rate = 90; |
| node->io_percent = 16; |
| node->low_power_ceil_mbps = 0; |
| node->low_power_io_percent = 16; |
| node->low_power_delay = 60; |
| node->bw_step = 190; |
| node->sample_ms = 50; |
| node->up_scale = 0; |
| node->up_thres = 10; |
| node->down_thres = 0; |
| node->down_count = 3; |
| node->hist_memory = 0; |
| node->hyst_trigger_count = 3; |
| node->hyst_length = 0; |
| node->idle_mbps = 400; |
| node->mbps_zones[0] = 0; |
| node->hw = hwmon; |
| |
| mutex_lock(&list_lock); |
| list_add_tail(&node->list, &hwmon_list); |
| mutex_unlock(&list_lock); |
| |
| if (hwmon->gov) { |
| ret = devfreq_add_governor(hwmon->gov); |
| } else { |
| mutex_lock(&state_lock); |
| if (!use_cnt) |
| ret = devfreq_add_governor(&devfreq_gov_bw_hwmon); |
| if (!ret) |
| use_cnt++; |
| mutex_unlock(&state_lock); |
| } |
| |
| if (!ret) |
| dev_info(dev, "BW HWmon governor registered.\n"); |
| else |
| dev_err(dev, "BW HWmon governor registration failed!\n"); |
| |
| return ret; |
| } |
| |
| MODULE_DESCRIPTION("HW monitor based dev DDR bandwidth voting driver"); |
| MODULE_LICENSE("GPL v2"); |