| /* |
| I2C functions |
| Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com> |
| Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| /* |
| This file includes an i2c implementation that was reverse engineered |
| from the Hauppauge windows driver. Older ivtv versions used i2c-algo-bit, |
| which whilst fine under most circumstances, had trouble with the Zilog |
| CPU on the PVR-150 which handles IR functions (occasional inability to |
| communicate with the chip until it was reset) and also with the i2c |
| bus being completely unreachable when multiple PVR cards were present. |
| |
| The implementation is very similar to i2c-algo-bit, but there are enough |
| subtle differences that the two are hard to merge. The general strategy |
| employed by i2c-algo-bit is to use udelay() to implement the timing |
| when putting out bits on the scl/sda lines. The general strategy taken |
| here is to poll the lines for state changes (see ivtv_waitscl and |
| ivtv_waitsda). In addition there are small delays at various locations |
| which poll the SCL line 5 times (ivtv_scldelay). I would guess that |
| since this is memory mapped I/O that the length of those delays is tied |
| to the PCI bus clock. There is some extra code to do with recovery |
| and retries. Since it is not known what causes the actual i2c problems |
| in the first place, the only goal if one was to attempt to use |
| i2c-algo-bit would be to try to make it follow the same code path. |
| This would be a lot of work, and I'm also not convinced that it would |
| provide a generic benefit to i2c-algo-bit. Therefore consider this |
| an engineering solution -- not pretty, but it works. |
| |
| Some more general comments about what we are doing: |
| |
| The i2c bus is a 2 wire serial bus, with clock (SCL) and data (SDA) |
| lines. To communicate on the bus (as a master, we don't act as a slave), |
| we first initiate a start condition (ivtv_start). We then write the |
| address of the device that we want to communicate with, along with a flag |
| that indicates whether this is a read or a write. The slave then issues |
| an ACK signal (ivtv_ack), which tells us that it is ready for reading / |
| writing. We then proceed with reading or writing (ivtv_read/ivtv_write), |
| and finally issue a stop condition (ivtv_stop) to make the bus available |
| to other masters. |
| |
| There is an additional form of transaction where a write may be |
| immediately followed by a read. In this case, there is no intervening |
| stop condition. (Only the msp3400 chip uses this method of data transfer). |
| */ |
| |
| #include "ivtv-driver.h" |
| #include "ivtv-cards.h" |
| #include "ivtv-gpio.h" |
| #include "ivtv-i2c.h" |
| |
| #include <media/ir-kbd-i2c.h> |
| |
| /* i2c implementation for cx23415/6 chip, ivtv project. |
| * Author: Kevin Thayer (nufan_wfk at yahoo.com) |
| */ |
| /* i2c stuff */ |
| #define IVTV_REG_I2C_SETSCL_OFFSET 0x7000 |
| #define IVTV_REG_I2C_SETSDA_OFFSET 0x7004 |
| #define IVTV_REG_I2C_GETSCL_OFFSET 0x7008 |
| #define IVTV_REG_I2C_GETSDA_OFFSET 0x700c |
| |
| #ifndef I2C_ADAP_CLASS_TV_ANALOG |
| #define I2C_ADAP_CLASS_TV_ANALOG I2C_CLASS_TV_ANALOG |
| #endif /* I2C_ADAP_CLASS_TV_ANALOG */ |
| |
| #define IVTV_CS53L32A_I2C_ADDR 0x11 |
| #define IVTV_CX25840_I2C_ADDR 0x44 |
| #define IVTV_SAA7115_I2C_ADDR 0x21 |
| #define IVTV_SAA7127_I2C_ADDR 0x44 |
| #define IVTV_SAA717x_I2C_ADDR 0x21 |
| #define IVTV_MSP3400_I2C_ADDR 0x40 |
| #define IVTV_HAUPPAUGE_I2C_ADDR 0x50 |
| #define IVTV_WM8739_I2C_ADDR 0x1a |
| #define IVTV_WM8775_I2C_ADDR 0x1b |
| #define IVTV_TEA5767_I2C_ADDR 0x60 |
| #define IVTV_UPD64031A_I2C_ADDR 0x12 |
| #define IVTV_UPD64083_I2C_ADDR 0x5c |
| #define IVTV_TDA985X_I2C_ADDR 0x5b |
| |
| /* This array should match the IVTV_HW_ defines */ |
| static const u8 hw_driverids[] = { |
| I2C_DRIVERID_CX25840, |
| I2C_DRIVERID_SAA711X, |
| I2C_DRIVERID_SAA7127, |
| I2C_DRIVERID_MSP3400, |
| I2C_DRIVERID_TUNER, |
| I2C_DRIVERID_WM8775, |
| I2C_DRIVERID_CS53L32A, |
| I2C_DRIVERID_TVEEPROM, |
| I2C_DRIVERID_SAA711X, |
| I2C_DRIVERID_TVAUDIO, |
| I2C_DRIVERID_UPD64031A, |
| I2C_DRIVERID_UPD64083, |
| I2C_DRIVERID_SAA717X, |
| I2C_DRIVERID_WM8739, |
| I2C_DRIVERID_VP27SMPX, |
| 0 /* IVTV_HW_GPIO dummy driver ID */ |
| }; |
| |
| /* This array should match the IVTV_HW_ defines */ |
| static const char * const hw_drivernames[] = { |
| "cx2584x", |
| "saa7115", |
| "saa7127", |
| "msp3400", |
| "tuner", |
| "wm8775", |
| "cs53l32a", |
| "tveeprom", |
| "saa7114", |
| "tvaudio", |
| "upd64031a", |
| "upd64083", |
| "saa717x", |
| "wm8739", |
| "vp27smpx", |
| "gpio", |
| }; |
| |
| static int attach_inform(struct i2c_client *client) |
| { |
| struct ivtv *itv = (struct ivtv *)i2c_get_adapdata(client->adapter); |
| int i; |
| |
| IVTV_DEBUG_I2C("i2c client attach\n"); |
| for (i = 0; i < I2C_CLIENTS_MAX; i++) { |
| if (itv->i2c_clients[i] == NULL) { |
| itv->i2c_clients[i] = client; |
| break; |
| } |
| } |
| if (i == I2C_CLIENTS_MAX) { |
| IVTV_ERR("Insufficient room for new I2C client\n"); |
| } |
| return 0; |
| } |
| |
| static int detach_inform(struct i2c_client *client) |
| { |
| int i; |
| struct ivtv *itv = (struct ivtv *)i2c_get_adapdata(client->adapter); |
| |
| IVTV_DEBUG_I2C("i2c client detach\n"); |
| for (i = 0; i < I2C_CLIENTS_MAX; i++) { |
| if (itv->i2c_clients[i] == client) { |
| itv->i2c_clients[i] = NULL; |
| break; |
| } |
| } |
| IVTV_DEBUG_I2C("i2c detach [client=%s,%s]\n", |
| client->name, (i < I2C_CLIENTS_MAX) ? "ok" : "failed"); |
| |
| return 0; |
| } |
| |
| /* Set the serial clock line to the desired state */ |
| static void ivtv_setscl(struct ivtv *itv, int state) |
| { |
| /* write them out */ |
| /* write bits are inverted */ |
| write_reg(~state, IVTV_REG_I2C_SETSCL_OFFSET); |
| } |
| |
| /* Set the serial data line to the desired state */ |
| static void ivtv_setsda(struct ivtv *itv, int state) |
| { |
| /* write them out */ |
| /* write bits are inverted */ |
| write_reg(~state & 1, IVTV_REG_I2C_SETSDA_OFFSET); |
| } |
| |
| /* Read the serial clock line */ |
| static int ivtv_getscl(struct ivtv *itv) |
| { |
| return read_reg(IVTV_REG_I2C_GETSCL_OFFSET) & 1; |
| } |
| |
| /* Read the serial data line */ |
| static int ivtv_getsda(struct ivtv *itv) |
| { |
| return read_reg(IVTV_REG_I2C_GETSDA_OFFSET) & 1; |
| } |
| |
| /* Implement a short delay by polling the serial clock line */ |
| static void ivtv_scldelay(struct ivtv *itv) |
| { |
| int i; |
| |
| for (i = 0; i < 5; ++i) |
| ivtv_getscl(itv); |
| } |
| |
| /* Wait for the serial clock line to become set to a specific value */ |
| static int ivtv_waitscl(struct ivtv *itv, int val) |
| { |
| int i; |
| |
| ivtv_scldelay(itv); |
| for (i = 0; i < 1000; ++i) { |
| if (ivtv_getscl(itv) == val) |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* Wait for the serial data line to become set to a specific value */ |
| static int ivtv_waitsda(struct ivtv *itv, int val) |
| { |
| int i; |
| |
| ivtv_scldelay(itv); |
| for (i = 0; i < 1000; ++i) { |
| if (ivtv_getsda(itv) == val) |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* Wait for the slave to issue an ACK */ |
| static int ivtv_ack(struct ivtv *itv) |
| { |
| int ret = 0; |
| |
| if (ivtv_getscl(itv) == 1) { |
| IVTV_DEBUG_HI_I2C("SCL was high starting an ack\n"); |
| ivtv_setscl(itv, 0); |
| if (!ivtv_waitscl(itv, 0)) { |
| IVTV_DEBUG_I2C("Could not set SCL low starting an ack\n"); |
| return -EREMOTEIO; |
| } |
| } |
| ivtv_setsda(itv, 1); |
| ivtv_scldelay(itv); |
| ivtv_setscl(itv, 1); |
| if (!ivtv_waitsda(itv, 0)) { |
| IVTV_DEBUG_I2C("Slave did not ack\n"); |
| ret = -EREMOTEIO; |
| } |
| ivtv_setscl(itv, 0); |
| if (!ivtv_waitscl(itv, 0)) { |
| IVTV_DEBUG_I2C("Failed to set SCL low after ACK\n"); |
| ret = -EREMOTEIO; |
| } |
| return ret; |
| } |
| |
| /* Write a single byte to the i2c bus and wait for the slave to ACK */ |
| static int ivtv_sendbyte(struct ivtv *itv, unsigned char byte) |
| { |
| int i, bit; |
| |
| IVTV_DEBUG_HI_I2C("write %x\n",byte); |
| for (i = 0; i < 8; ++i, byte<<=1) { |
| ivtv_setscl(itv, 0); |
| if (!ivtv_waitscl(itv, 0)) { |
| IVTV_DEBUG_I2C("Error setting SCL low\n"); |
| return -EREMOTEIO; |
| } |
| bit = (byte>>7)&1; |
| ivtv_setsda(itv, bit); |
| if (!ivtv_waitsda(itv, bit)) { |
| IVTV_DEBUG_I2C("Error setting SDA\n"); |
| return -EREMOTEIO; |
| } |
| ivtv_setscl(itv, 1); |
| if (!ivtv_waitscl(itv, 1)) { |
| IVTV_DEBUG_I2C("Slave not ready for bit\n"); |
| return -EREMOTEIO; |
| } |
| } |
| ivtv_setscl(itv, 0); |
| if (!ivtv_waitscl(itv, 0)) { |
| IVTV_DEBUG_I2C("Error setting SCL low\n"); |
| return -EREMOTEIO; |
| } |
| return ivtv_ack(itv); |
| } |
| |
| /* Read a byte from the i2c bus and send a NACK if applicable (i.e. for the |
| final byte) */ |
| static int ivtv_readbyte(struct ivtv *itv, unsigned char *byte, int nack) |
| { |
| int i; |
| |
| *byte = 0; |
| |
| ivtv_setsda(itv, 1); |
| ivtv_scldelay(itv); |
| for (i = 0; i < 8; ++i) { |
| ivtv_setscl(itv, 0); |
| ivtv_scldelay(itv); |
| ivtv_setscl(itv, 1); |
| if (!ivtv_waitscl(itv, 1)) { |
| IVTV_DEBUG_I2C("Error setting SCL high\n"); |
| return -EREMOTEIO; |
| } |
| *byte = ((*byte)<<1)|ivtv_getsda(itv); |
| } |
| ivtv_setscl(itv, 0); |
| ivtv_scldelay(itv); |
| ivtv_setsda(itv, nack); |
| ivtv_scldelay(itv); |
| ivtv_setscl(itv, 1); |
| ivtv_scldelay(itv); |
| ivtv_setscl(itv, 0); |
| ivtv_scldelay(itv); |
| IVTV_DEBUG_HI_I2C("read %x\n",*byte); |
| return 0; |
| } |
| |
| /* Issue a start condition on the i2c bus to alert slaves to prepare for |
| an address write */ |
| static int ivtv_start(struct ivtv *itv) |
| { |
| int sda; |
| |
| sda = ivtv_getsda(itv); |
| if (sda != 1) { |
| IVTV_DEBUG_HI_I2C("SDA was low at start\n"); |
| ivtv_setsda(itv, 1); |
| if (!ivtv_waitsda(itv, 1)) { |
| IVTV_DEBUG_I2C("SDA stuck low\n"); |
| return -EREMOTEIO; |
| } |
| } |
| if (ivtv_getscl(itv) != 1) { |
| ivtv_setscl(itv, 1); |
| if (!ivtv_waitscl(itv, 1)) { |
| IVTV_DEBUG_I2C("SCL stuck low at start\n"); |
| return -EREMOTEIO; |
| } |
| } |
| ivtv_setsda(itv, 0); |
| ivtv_scldelay(itv); |
| return 0; |
| } |
| |
| /* Issue a stop condition on the i2c bus to release it */ |
| static int ivtv_stop(struct ivtv *itv) |
| { |
| int i; |
| |
| if (ivtv_getscl(itv) != 0) { |
| IVTV_DEBUG_HI_I2C("SCL not low when stopping\n"); |
| ivtv_setscl(itv, 0); |
| if (!ivtv_waitscl(itv, 0)) { |
| IVTV_DEBUG_I2C("SCL could not be set low\n"); |
| } |
| } |
| ivtv_setsda(itv, 0); |
| ivtv_scldelay(itv); |
| ivtv_setscl(itv, 1); |
| if (!ivtv_waitscl(itv, 1)) { |
| IVTV_DEBUG_I2C("SCL could not be set high\n"); |
| return -EREMOTEIO; |
| } |
| ivtv_scldelay(itv); |
| ivtv_setsda(itv, 1); |
| if (!ivtv_waitsda(itv, 1)) { |
| IVTV_DEBUG_I2C("resetting I2C\n"); |
| for (i = 0; i < 16; ++i) { |
| ivtv_setscl(itv, 0); |
| ivtv_scldelay(itv); |
| ivtv_setscl(itv, 1); |
| ivtv_scldelay(itv); |
| ivtv_setsda(itv, 1); |
| } |
| ivtv_waitsda(itv, 1); |
| return -EREMOTEIO; |
| } |
| return 0; |
| } |
| |
| /* Write a message to the given i2c slave. do_stop may be 0 to prevent |
| issuing the i2c stop condition (when following with a read) */ |
| static int ivtv_write(struct ivtv *itv, unsigned char addr, unsigned char *data, u32 len, int do_stop) |
| { |
| int retry, ret = -EREMOTEIO; |
| u32 i; |
| |
| for (retry = 0; ret != 0 && retry < 8; ++retry) { |
| ret = ivtv_start(itv); |
| |
| if (ret == 0) { |
| ret = ivtv_sendbyte(itv, addr<<1); |
| for (i = 0; ret == 0 && i < len; ++i) |
| ret = ivtv_sendbyte(itv, data[i]); |
| } |
| if (ret != 0 || do_stop) { |
| ivtv_stop(itv); |
| } |
| } |
| if (ret) |
| IVTV_DEBUG_I2C("i2c write to %x failed\n", addr); |
| return ret; |
| } |
| |
| /* Read data from the given i2c slave. A stop condition is always issued. */ |
| static int ivtv_read(struct ivtv *itv, unsigned char addr, unsigned char *data, u32 len) |
| { |
| int retry, ret = -EREMOTEIO; |
| u32 i; |
| |
| for (retry = 0; ret != 0 && retry < 8; ++retry) { |
| ret = ivtv_start(itv); |
| if (ret == 0) |
| ret = ivtv_sendbyte(itv, (addr << 1) | 1); |
| for (i = 0; ret == 0 && i < len; ++i) { |
| ret = ivtv_readbyte(itv, &data[i], i == len - 1); |
| } |
| ivtv_stop(itv); |
| } |
| if (ret) |
| IVTV_DEBUG_I2C("i2c read from %x failed\n", addr); |
| return ret; |
| } |
| |
| /* Kernel i2c transfer implementation. Takes a number of messages to be read |
| or written. If a read follows a write, this will occur without an |
| intervening stop condition */ |
| static int ivtv_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) |
| { |
| struct ivtv *itv = i2c_get_adapdata(i2c_adap); |
| int retval; |
| int i; |
| |
| mutex_lock(&itv->i2c_bus_lock); |
| for (i = retval = 0; retval == 0 && i < num; i++) { |
| if (msgs[i].flags & I2C_M_RD) |
| retval = ivtv_read(itv, msgs[i].addr, msgs[i].buf, msgs[i].len); |
| else { |
| /* if followed by a read, don't stop */ |
| int stop = !(i + 1 < num && msgs[i + 1].flags == I2C_M_RD); |
| |
| retval = ivtv_write(itv, msgs[i].addr, msgs[i].buf, msgs[i].len, stop); |
| } |
| } |
| mutex_unlock(&itv->i2c_bus_lock); |
| return retval ? retval : num; |
| } |
| |
| /* Kernel i2c capabilities */ |
| static u32 ivtv_functionality(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static struct i2c_algorithm ivtv_algo = { |
| .master_xfer = ivtv_xfer, |
| .functionality = ivtv_functionality, |
| }; |
| |
| /* template for our-bit banger */ |
| static struct i2c_adapter ivtv_i2c_adap_hw_template = { |
| .name = "ivtv i2c driver", |
| .id = I2C_HW_B_CX2341X, |
| .algo = &ivtv_algo, |
| .algo_data = NULL, /* filled from template */ |
| .client_register = attach_inform, |
| .client_unregister = detach_inform, |
| .owner = THIS_MODULE, |
| #ifdef I2C_ADAP_CLASS_TV_ANALOG |
| .class = I2C_ADAP_CLASS_TV_ANALOG, |
| #endif |
| }; |
| |
| static void ivtv_setscl_old(void *data, int state) |
| { |
| struct ivtv *itv = (struct ivtv *)data; |
| |
| if (state) |
| itv->i2c_state |= 0x01; |
| else |
| itv->i2c_state &= ~0x01; |
| |
| /* write them out */ |
| /* write bits are inverted */ |
| write_reg(~itv->i2c_state, IVTV_REG_I2C_SETSCL_OFFSET); |
| } |
| |
| static void ivtv_setsda_old(void *data, int state) |
| { |
| struct ivtv *itv = (struct ivtv *)data; |
| |
| if (state) |
| itv->i2c_state |= 0x01; |
| else |
| itv->i2c_state &= ~0x01; |
| |
| /* write them out */ |
| /* write bits are inverted */ |
| write_reg(~itv->i2c_state, IVTV_REG_I2C_SETSDA_OFFSET); |
| } |
| |
| static int ivtv_getscl_old(void *data) |
| { |
| struct ivtv *itv = (struct ivtv *)data; |
| |
| return read_reg(IVTV_REG_I2C_GETSCL_OFFSET) & 1; |
| } |
| |
| static int ivtv_getsda_old(void *data) |
| { |
| struct ivtv *itv = (struct ivtv *)data; |
| |
| return read_reg(IVTV_REG_I2C_GETSDA_OFFSET) & 1; |
| } |
| |
| /* template for i2c-bit-algo */ |
| static struct i2c_adapter ivtv_i2c_adap_template = { |
| .name = "ivtv i2c driver", |
| .id = I2C_HW_B_CX2341X, /* algo-bit is OR'd with this */ |
| .algo = NULL, /* set by i2c-algo-bit */ |
| .algo_data = NULL, /* filled from template */ |
| .client_register = attach_inform, |
| .client_unregister = detach_inform, |
| .owner = THIS_MODULE, |
| #ifdef I2C_ADAP_CLASS_TV_ANALOG |
| .class = I2C_ADAP_CLASS_TV_ANALOG, |
| #endif |
| }; |
| |
| static const struct i2c_algo_bit_data ivtv_i2c_algo_template = { |
| .setsda = ivtv_setsda_old, |
| .setscl = ivtv_setscl_old, |
| .getsda = ivtv_getsda_old, |
| .getscl = ivtv_getscl_old, |
| .udelay = 10, |
| .timeout = 200, |
| }; |
| |
| static struct i2c_client ivtv_i2c_client_template = { |
| .name = "ivtv internal", |
| }; |
| |
| int ivtv_call_i2c_client(struct ivtv *itv, int addr, unsigned int cmd, void *arg) |
| { |
| struct i2c_client *client; |
| int retval; |
| int i; |
| |
| IVTV_DEBUG_I2C("call_i2c_client addr=%02x\n", addr); |
| for (i = 0; i < I2C_CLIENTS_MAX; i++) { |
| client = itv->i2c_clients[i]; |
| if (client == NULL) { |
| continue; |
| } |
| if (client->driver->command == NULL) { |
| continue; |
| } |
| if (addr == client->addr) { |
| retval = client->driver->command(client, cmd, arg); |
| return retval; |
| } |
| } |
| if (cmd != VIDIOC_G_CHIP_IDENT) |
| IVTV_ERR("i2c addr 0x%02x not found for command 0x%x\n", addr, cmd); |
| return -ENODEV; |
| } |
| |
| /* Find the i2c device based on the driver ID and return |
| its i2c address or -ENODEV if no matching device was found. */ |
| static int ivtv_i2c_id_addr(struct ivtv *itv, u32 id) |
| { |
| struct i2c_client *client; |
| int retval = -ENODEV; |
| int i; |
| |
| for (i = 0; i < I2C_CLIENTS_MAX; i++) { |
| client = itv->i2c_clients[i]; |
| if (client == NULL) |
| continue; |
| if (id == client->driver->id) { |
| retval = client->addr; |
| break; |
| } |
| } |
| return retval; |
| } |
| |
| /* Find the i2c device name matching the DRIVERID */ |
| static const char *ivtv_i2c_id_name(u32 id) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(hw_driverids); i++) |
| if (hw_driverids[i] == id) |
| return hw_drivernames[i]; |
| return "unknown device"; |
| } |
| |
| /* Find the i2c device name matching the IVTV_HW_ flag */ |
| static const char *ivtv_i2c_hw_name(u32 hw) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(hw_driverids); i++) |
| if (1 << i == hw) |
| return hw_drivernames[i]; |
| return "unknown device"; |
| } |
| |
| /* Find the i2c device matching the IVTV_HW_ flag and return |
| its i2c address or -ENODEV if no matching device was found. */ |
| int ivtv_i2c_hw_addr(struct ivtv *itv, u32 hw) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(hw_driverids); i++) |
| if (1 << i == hw) |
| return ivtv_i2c_id_addr(itv, hw_driverids[i]); |
| return -ENODEV; |
| } |
| |
| /* Calls i2c device based on IVTV_HW_ flag. If hw == 0, then do nothing. |
| If hw == IVTV_HW_GPIO then call the gpio handler. */ |
| int ivtv_i2c_hw(struct ivtv *itv, u32 hw, unsigned int cmd, void *arg) |
| { |
| int addr; |
| |
| if (hw == IVTV_HW_GPIO) |
| return ivtv_gpio(itv, cmd, arg); |
| if (hw == 0) |
| return 0; |
| |
| addr = ivtv_i2c_hw_addr(itv, hw); |
| if (addr < 0) { |
| IVTV_ERR("i2c hardware 0x%08x (%s) not found for command 0x%x\n", |
| hw, ivtv_i2c_hw_name(hw), cmd); |
| return addr; |
| } |
| return ivtv_call_i2c_client(itv, addr, cmd, arg); |
| } |
| |
| /* Calls i2c device based on I2C driver ID. */ |
| int ivtv_i2c_id(struct ivtv *itv, u32 id, unsigned int cmd, void *arg) |
| { |
| int addr; |
| |
| addr = ivtv_i2c_id_addr(itv, id); |
| if (addr < 0) { |
| if (cmd != VIDIOC_G_CHIP_IDENT) |
| IVTV_ERR("i2c ID 0x%08x (%s) not found for command 0x%x\n", |
| id, ivtv_i2c_id_name(id), cmd); |
| return addr; |
| } |
| return ivtv_call_i2c_client(itv, addr, cmd, arg); |
| } |
| |
| int ivtv_cx25840(struct ivtv *itv, unsigned int cmd, void *arg) |
| { |
| return ivtv_call_i2c_client(itv, IVTV_CX25840_I2C_ADDR, cmd, arg); |
| } |
| |
| int ivtv_saa7115(struct ivtv *itv, unsigned int cmd, void *arg) |
| { |
| return ivtv_call_i2c_client(itv, IVTV_SAA7115_I2C_ADDR, cmd, arg); |
| } |
| |
| int ivtv_saa7127(struct ivtv *itv, unsigned int cmd, void *arg) |
| { |
| return ivtv_call_i2c_client(itv, IVTV_SAA7127_I2C_ADDR, cmd, arg); |
| } |
| |
| int ivtv_saa717x(struct ivtv *itv, unsigned int cmd, void *arg) |
| { |
| return ivtv_call_i2c_client(itv, IVTV_SAA717x_I2C_ADDR, cmd, arg); |
| } |
| |
| int ivtv_upd64031a(struct ivtv *itv, unsigned int cmd, void *arg) |
| { |
| return ivtv_call_i2c_client(itv, IVTV_UPD64031A_I2C_ADDR, cmd, arg); |
| } |
| |
| int ivtv_upd64083(struct ivtv *itv, unsigned int cmd, void *arg) |
| { |
| return ivtv_call_i2c_client(itv, IVTV_UPD64083_I2C_ADDR, cmd, arg); |
| } |
| |
| /* broadcast cmd for all I2C clients and for the gpio subsystem */ |
| void ivtv_call_i2c_clients(struct ivtv *itv, unsigned int cmd, void *arg) |
| { |
| if (itv->i2c_adap.algo == NULL) { |
| IVTV_ERR("Adapter is not set"); |
| return; |
| } |
| i2c_clients_command(&itv->i2c_adap, cmd, arg); |
| if (itv->hw_flags & IVTV_HW_GPIO) |
| ivtv_gpio(itv, cmd, arg); |
| } |
| |
| /* init + register i2c algo-bit adapter */ |
| int __devinit init_ivtv_i2c(struct ivtv *itv) |
| { |
| IVTV_DEBUG_I2C("i2c init\n"); |
| |
| if (itv->options.newi2c > 0) { |
| memcpy(&itv->i2c_adap, &ivtv_i2c_adap_hw_template, |
| sizeof(struct i2c_adapter)); |
| } else { |
| memcpy(&itv->i2c_adap, &ivtv_i2c_adap_template, |
| sizeof(struct i2c_adapter)); |
| memcpy(&itv->i2c_algo, &ivtv_i2c_algo_template, |
| sizeof(struct i2c_algo_bit_data)); |
| itv->i2c_algo.data = itv; |
| itv->i2c_adap.algo_data = &itv->i2c_algo; |
| } |
| |
| sprintf(itv->i2c_adap.name + strlen(itv->i2c_adap.name), " #%d", |
| itv->num); |
| i2c_set_adapdata(&itv->i2c_adap, itv); |
| |
| memcpy(&itv->i2c_client, &ivtv_i2c_client_template, |
| sizeof(struct i2c_client)); |
| itv->i2c_client.adapter = &itv->i2c_adap; |
| itv->i2c_adap.dev.parent = &itv->dev->dev; |
| |
| IVTV_DEBUG_I2C("setting scl and sda to 1\n"); |
| ivtv_setscl(itv, 1); |
| ivtv_setsda(itv, 1); |
| |
| if (itv->options.newi2c > 0) |
| return i2c_add_adapter(&itv->i2c_adap); |
| else |
| return i2c_bit_add_bus(&itv->i2c_adap); |
| } |
| |
| void __devexit exit_ivtv_i2c(struct ivtv *itv) |
| { |
| IVTV_DEBUG_I2C("i2c exit\n"); |
| |
| i2c_del_adapter(&itv->i2c_adap); |
| } |