iwlegacy: s/IL_RATE/RATE/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-rs.c b/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
index 5d88a45..e31ee20 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
@@ -46,23 +46,23 @@
#define IL_NUMBER_TRY 1
#define IL_HT_NUMBER_TRY 3
-#define IL_RATE_MAX_WINDOW 62 /* # tx in history win */
-#define IL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */
-#define IL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
+#define RATE_MAX_WINDOW 62 /* # tx in history win */
+#define RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */
+#define RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
/* max allowed rate miss before sync LQ cmd */
#define IL_MISSED_RATE_MAX 15
/* max time to accum history 2 seconds */
-#define IL_RATE_SCALE_FLUSH_INTVL (3*HZ)
+#define RATE_SCALE_FLUSH_INTVL (3*HZ)
static u8 rs_ht_to_legacy[] = {
- IL_RATE_6M_INDEX, IL_RATE_6M_INDEX,
- IL_RATE_6M_INDEX, IL_RATE_6M_INDEX,
- IL_RATE_6M_INDEX,
- IL_RATE_6M_INDEX, IL_RATE_9M_INDEX,
- IL_RATE_12M_INDEX, IL_RATE_18M_INDEX,
- IL_RATE_24M_INDEX, IL_RATE_36M_INDEX,
- IL_RATE_48M_INDEX, IL_RATE_54M_INDEX
+ RATE_6M_INDEX, RATE_6M_INDEX,
+ RATE_6M_INDEX, RATE_6M_INDEX,
+ RATE_6M_INDEX,
+ RATE_6M_INDEX, RATE_9M_INDEX,
+ RATE_12M_INDEX, RATE_18M_INDEX,
+ RATE_24M_INDEX, RATE_36M_INDEX,
+ RATE_48M_INDEX, RATE_54M_INDEX
};
static const u8 ant_toggle_lookup[] = {
@@ -77,26 +77,26 @@
};
#define IL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
- [IL_RATE_##r##M_INDEX] = { IL_RATE_##r##M_PLCP, \
- IL_RATE_SISO_##s##M_PLCP, \
- IL_RATE_MIMO2_##s##M_PLCP,\
- IL_RATE_##r##M_IEEE, \
- IL_RATE_##ip##M_INDEX, \
- IL_RATE_##in##M_INDEX, \
- IL_RATE_##rp##M_INDEX, \
- IL_RATE_##rn##M_INDEX, \
- IL_RATE_##pp##M_INDEX, \
- IL_RATE_##np##M_INDEX }
+ [RATE_##r##M_INDEX] = { RATE_##r##M_PLCP, \
+ RATE_SISO_##s##M_PLCP, \
+ RATE_MIMO2_##s##M_PLCP,\
+ RATE_##r##M_IEEE, \
+ RATE_##ip##M_INDEX, \
+ RATE_##in##M_INDEX, \
+ RATE_##rp##M_INDEX, \
+ RATE_##rn##M_INDEX, \
+ RATE_##pp##M_INDEX, \
+ RATE_##np##M_INDEX }
/*
* Parameter order:
* rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
*
* If there isn't a valid next or previous rate then INV is used which
- * maps to IL_RATE_INVALID
+ * maps to RATE_INVALID
*
*/
-const struct il_rate_info il_rates[IL_RATE_COUNT] = {
+const struct il_rate_info il_rates[RATE_COUNT] = {
IL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
IL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
IL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
@@ -120,12 +120,12 @@
if (rate_n_flags & RATE_MCS_HT_MSK) {
idx = (rate_n_flags & 0xff);
- if (idx >= IL_RATE_MIMO2_6M_PLCP)
- idx = idx - IL_RATE_MIMO2_6M_PLCP;
+ if (idx >= RATE_MIMO2_6M_PLCP)
+ idx = idx - RATE_MIMO2_6M_PLCP;
idx += IL_FIRST_OFDM_RATE;
/* skip 9M not supported in ht*/
- if (idx >= IL_RATE_9M_INDEX)
+ if (idx >= RATE_9M_INDEX)
idx += 1;
if (idx >= IL_FIRST_OFDM_RATE && idx <= IL_LAST_OFDM_RATE)
return idx;
@@ -169,32 +169,32 @@
* (2.4 GHz) band.
*/
-static s32 expected_tpt_legacy[IL_RATE_COUNT] = {
+static s32 expected_tpt_legacy[RATE_COUNT] = {
7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0
};
-static s32 expected_tpt_siso20MHz[4][IL_RATE_COUNT] = {
+static s32 expected_tpt_siso20MHz[4][RATE_COUNT] = {
{0, 0, 0, 0, 42, 0, 76, 102, 124, 158, 183, 193, 202}, /* Norm */
{0, 0, 0, 0, 46, 0, 82, 110, 132, 167, 192, 202, 210}, /* SGI */
{0, 0, 0, 0, 48, 0, 93, 135, 176, 251, 319, 351, 381}, /* AGG */
{0, 0, 0, 0, 53, 0, 102, 149, 193, 275, 348, 381, 413}, /* AGG+SGI */
};
-static s32 expected_tpt_siso40MHz[4][IL_RATE_COUNT] = {
+static s32 expected_tpt_siso40MHz[4][RATE_COUNT] = {
{0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
{0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
{0, 0, 0, 0, 96, 0, 182, 259, 328, 451, 553, 598, 640}, /* AGG */
{0, 0, 0, 0, 106, 0, 199, 282, 357, 487, 593, 640, 683}, /* AGG+SGI */
};
-static s32 expected_tpt_mimo2_20MHz[4][IL_RATE_COUNT] = {
+static s32 expected_tpt_mimo2_20MHz[4][RATE_COUNT] = {
{0, 0, 0, 0, 74, 0, 123, 155, 179, 213, 235, 243, 250}, /* Norm */
{0, 0, 0, 0, 81, 0, 131, 164, 187, 221, 242, 250, 256}, /* SGI */
{0, 0, 0, 0, 92, 0, 175, 250, 317, 436, 534, 578, 619}, /* AGG */
{0, 0, 0, 0, 102, 0, 192, 273, 344, 470, 573, 619, 660}, /* AGG+SGI*/
};
-static s32 expected_tpt_mimo2_40MHz[4][IL_RATE_COUNT] = {
+static s32 expected_tpt_mimo2_40MHz[4][RATE_COUNT] = {
{0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
{0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
{0, 0, 0, 0, 180, 0, 327, 446, 545, 708, 828, 878, 922}, /* AGG */
@@ -202,7 +202,7 @@
};
/* mbps, mcs */
-static const struct il_rate_mcs_info il_rate_mcs[IL_RATE_COUNT] = {
+static const struct il_rate_mcs_info il_rate_mcs[RATE_COUNT] = {
{ "1", "BPSK DSSS"},
{ "2", "QPSK DSSS"},
{"5.5", "BPSK CCK"},
@@ -418,10 +418,10 @@
int scale_index, int attempts, int successes)
{
struct il_rate_scale_data *win = NULL;
- static const u64 mask = (((u64)1) << (IL_RATE_MAX_WINDOW - 1));
+ static const u64 mask = (((u64)1) << (RATE_MAX_WINDOW - 1));
s32 fail_count, tpt;
- if (scale_index < 0 || scale_index >= IL_RATE_COUNT)
+ if (scale_index < 0 || scale_index >= RATE_COUNT)
return -EINVAL;
/* Select win for current tx bit rate */
@@ -439,10 +439,10 @@
* we keep these bitmaps!).
*/
while (attempts > 0) {
- if (win->counter >= IL_RATE_MAX_WINDOW) {
+ if (win->counter >= RATE_MAX_WINDOW) {
/* remove earliest */
- win->counter = IL_RATE_MAX_WINDOW - 1;
+ win->counter = RATE_MAX_WINDOW - 1;
if (win->data & mask) {
win->data &= ~mask;
@@ -476,8 +476,8 @@
fail_count = win->counter - win->success_counter;
/* Calculate average throughput, if we have enough history. */
- if (fail_count >= IL_RATE_MIN_FAILURE_TH ||
- win->success_counter >= IL_RATE_MIN_SUCCESS_TH)
+ if (fail_count >= RATE_MIN_FAILURE_TH ||
+ win->success_counter >= RATE_MIN_SUCCESS_TH)
win->average_tpt = (win->success_ratio * tpt + 64) / 128;
else
win->average_tpt = IL_INVALID_VALUE;
@@ -557,7 +557,7 @@
memset(tbl, 0, sizeof(struct il_scale_tbl_info));
*rate_idx = il4965_hwrate_to_plcp_idx(rate_n_flags);
- if (*rate_idx == IL_RATE_INVALID) {
+ if (*rate_idx == RATE_INVALID) {
*rate_idx = -1;
return -EINVAL;
}
@@ -591,7 +591,7 @@
mcs = il4965_rs_extract_rate(rate_n_flags);
/* SISO */
- if (mcs <= IL_RATE_SISO_60M_PLCP) {
+ if (mcs <= RATE_SISO_60M_PLCP) {
if (il4965_num_of_ant == 1)
tbl->lq_type = LQ_SISO; /*else NONE*/
/* MIMO2 */
@@ -669,8 +669,8 @@
il4965_rs_get_adjacent_rate(struct il_priv *il, u8 index, u16 rate_mask,
int rate_type)
{
- u8 high = IL_RATE_INVALID;
- u8 low = IL_RATE_INVALID;
+ u8 high = RATE_INVALID;
+ u8 low = RATE_INVALID;
/* 802.11A or ht walks to the next literal adjacent rate in
* the rate table */
@@ -689,7 +689,7 @@
/* Find the next rate that is in the rate mask */
i = index + 1;
- for (mask = (1 << i); i < IL_RATE_COUNT; i++, mask <<= 1) {
+ for (mask = (1 << i); i < RATE_COUNT; i++, mask <<= 1) {
if (rate_mask & mask) {
high = i;
break;
@@ -700,9 +700,9 @@
}
low = index;
- while (low != IL_RATE_INVALID) {
+ while (low != RATE_INVALID) {
low = il_rates[low].prev_rs;
- if (low == IL_RATE_INVALID)
+ if (low == RATE_INVALID)
break;
if (rate_mask & (1 << low))
break;
@@ -710,9 +710,9 @@
}
high = index;
- while (high != IL_RATE_INVALID) {
+ while (high != RATE_INVALID) {
high = il_rates[high].next_rs;
- if (high == IL_RATE_INVALID)
+ if (high == RATE_INVALID)
break;
if (rate_mask & (1 << high))
break;
@@ -776,7 +776,7 @@
tbl->lq_type);
low = high_low & 0xff;
- if (low == IL_RATE_INVALID)
+ if (low == RATE_INVALID)
low = scale_index;
out:
@@ -856,7 +856,7 @@
/* For HT packets, map MCS to PLCP */
if (mac_flags & IEEE80211_TX_RC_MCS) {
mac_index &= RATE_MCS_CODE_MSK; /* Remove # of streams */
- if (mac_index >= (IL_RATE_9M_INDEX - IL_FIRST_OFDM_RATE))
+ if (mac_index >= (RATE_9M_INDEX - IL_FIRST_OFDM_RATE))
mac_index++;
/*
* mac80211 HT index is always zero-indexed; we need to move
@@ -1023,7 +1023,7 @@
struct il_scale_tbl_info *tbl)
{
/* Used to choose among HT tables */
- s32 (*ht_tbl_pointer)[IL_RATE_COUNT];
+ s32 (*ht_tbl_pointer)[RATE_COUNT];
/* Check for invalid LQ type */
if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) {
@@ -1089,7 +1089,7 @@
u16 high_low;
s8 rate = index;
- new_rate = high = low = start_hi = IL_RATE_INVALID;
+ new_rate = high = low = start_hi = RATE_INVALID;
for (; ;) {
high_low = il4965_rs_get_adjacent_rate(il, rate, rate_mask,
@@ -1114,16 +1114,16 @@
* "active" throughput (under perfect conditions).
*/
if ((100 * tpt_tbl[rate] > lq_sta->last_tpt &&
- (active_sr > IL_RATE_DECREASE_TH &&
- active_sr <= IL_RATE_HIGH_TH &&
+ (active_sr > RATE_DECREASE_TH &&
+ active_sr <= RATE_HIGH_TH &&
tpt_tbl[rate] <= active_tpt)) ||
- (active_sr >= IL_RATE_SCALE_SWITCH &&
+ (active_sr >= RATE_SCALE_SWITCH &&
tpt_tbl[rate] > active_tpt)) {
/* (2nd or later pass)
* If we've already tried to raise the rate, and are
* now trying to lower it, use the higher rate. */
- if (start_hi != IL_RATE_INVALID) {
+ if (start_hi != RATE_INVALID) {
new_rate = start_hi;
break;
}
@@ -1131,7 +1131,7 @@
new_rate = rate;
/* Loop again with lower rate */
- if (low != IL_RATE_INVALID)
+ if (low != RATE_INVALID)
rate = low;
/* Lower rate not available, use the original */
@@ -1143,11 +1143,11 @@
/* (2nd or later pass)
* If we've already tried to lower the rate, and are
* now trying to raise it, use the lower rate. */
- if (new_rate != IL_RATE_INVALID)
+ if (new_rate != RATE_INVALID)
break;
/* Loop again with higher rate */
- else if (high != IL_RATE_INVALID) {
+ else if (high != RATE_INVALID) {
start_hi = high;
rate = high;
@@ -1207,7 +1207,7 @@
D_RATE("LQ: MIMO2 best rate %d mask %X\n",
rate, rate_mask);
- if (rate == IL_RATE_INVALID || !((1 << rate) & rate_mask)) {
+ if (rate == RATE_INVALID || !((1 << rate) & rate_mask)) {
D_RATE(
"Can't switch with index %d rate mask %x\n",
rate, rate_mask);
@@ -1259,7 +1259,7 @@
rate = il4965_rs_get_best_rate(il, lq_sta, tbl, rate_mask, index);
D_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask);
- if (rate == IL_RATE_INVALID || !((1 << rate) & rate_mask)) {
+ if (rate == RATE_INVALID || !((1 << rate) & rate_mask)) {
D_RATE(
"can not switch with index %d rate mask %x\n",
rate, rate_mask);
@@ -1286,7 +1286,7 @@
&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
struct il_rate_scale_data *win = &(tbl->win[index]);
u32 sz = (sizeof(struct il_scale_tbl_info) -
- (sizeof(struct il_rate_scale_data) * IL_RATE_COUNT));
+ (sizeof(struct il_rate_scale_data) * RATE_COUNT));
u8 start_action;
u8 valid_tx_ant = il->hw_params.valid_tx_ant;
u8 tx_chains_num = il->hw_params.tx_chains_num;
@@ -1404,7 +1404,7 @@
struct il_rate_scale_data *win = &(tbl->win[index]);
struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
u32 sz = (sizeof(struct il_scale_tbl_info) -
- (sizeof(struct il_rate_scale_data) * IL_RATE_COUNT));
+ (sizeof(struct il_rate_scale_data) * RATE_COUNT));
u8 start_action;
u8 valid_tx_ant = il->hw_params.valid_tx_ant;
u8 tx_chains_num = il->hw_params.tx_chains_num;
@@ -1526,7 +1526,7 @@
struct il_rate_scale_data *win = &(tbl->win[index]);
struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
u32 sz = (sizeof(struct il_scale_tbl_info) -
- (sizeof(struct il_rate_scale_data) * IL_RATE_COUNT));
+ (sizeof(struct il_rate_scale_data) * RATE_COUNT));
u8 start_action;
u8 valid_tx_ant = il->hw_params.valid_tx_ant;
u8 tx_chains_num = il->hw_params.tx_chains_num;
@@ -1663,7 +1663,7 @@
flush_interval_passed =
time_after(jiffies,
(unsigned long)(lq_sta->flush_timer +
- IL_RATE_SCALE_FLUSH_INTVL));
+ RATE_SCALE_FLUSH_INTVL));
/*
* Check if we should allow search for new modulation mode.
@@ -1703,7 +1703,7 @@
D_RATE(
"LQ: stay in table clear win\n");
- for (i = 0; i < IL_RATE_COUNT; i++)
+ for (i = 0; i < RATE_COUNT; i++)
il4965_rs_rate_scale_clear_win(
&(tbl->win[i]));
}
@@ -1713,7 +1713,7 @@
* bitmaps and stats in active table (this will become the new
* "search" table). */
if (!lq_sta->stay_in_tbl) {
- for (i = 0; i < IL_RATE_COUNT; i++)
+ for (i = 0; i < RATE_COUNT; i++)
il4965_rs_rate_scale_clear_win(
&(tbl->win[i]));
}
@@ -1752,8 +1752,8 @@
struct ieee80211_conf *conf = &hw->conf;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- int low = IL_RATE_INVALID;
- int high = IL_RATE_INVALID;
+ int low = RATE_INVALID;
+ int high = RATE_INVALID;
int index;
int i;
struct il_rate_scale_data *win = NULL;
@@ -1884,8 +1884,8 @@
* in current association (use new rate found above).
*/
fail_count = win->counter - win->success_counter;
- if (fail_count < IL_RATE_MIN_FAILURE_TH &&
- win->success_counter < IL_RATE_MIN_SUCCESS_TH) {
+ if (fail_count < RATE_MIN_FAILURE_TH &&
+ win->success_counter < RATE_MIN_SUCCESS_TH) {
D_RATE("LQ: still below TH. succ=%d total=%d "
"for index %d\n",
win->success_counter, win->counter, index);
@@ -1971,21 +1971,21 @@
/* If user set max rate, dont allow higher than user constrain */
if (lq_sta->max_rate_idx != -1 &&
lq_sta->max_rate_idx < high)
- high = IL_RATE_INVALID;
+ high = RATE_INVALID;
sr = win->success_ratio;
/* Collect measured throughputs for current and adjacent rates */
current_tpt = win->average_tpt;
- if (low != IL_RATE_INVALID)
+ if (low != RATE_INVALID)
low_tpt = tbl->win[low].average_tpt;
- if (high != IL_RATE_INVALID)
+ if (high != RATE_INVALID)
high_tpt = tbl->win[high].average_tpt;
scale_action = 0;
/* Too many failures, decrease rate */
- if (sr <= IL_RATE_DECREASE_TH || current_tpt == 0) {
+ if (sr <= RATE_DECREASE_TH || current_tpt == 0) {
D_RATE(
"decrease rate because of low success_ratio\n");
scale_action = -1;
@@ -1994,9 +1994,9 @@
} else if (low_tpt == IL_INVALID_VALUE &&
high_tpt == IL_INVALID_VALUE) {
- if (high != IL_RATE_INVALID && sr >= IL_RATE_INCREASE_TH)
+ if (high != RATE_INVALID && sr >= RATE_INCREASE_TH)
scale_action = 1;
- else if (low != IL_RATE_INVALID)
+ else if (low != RATE_INVALID)
scale_action = 0;
}
@@ -2013,7 +2013,7 @@
if (high_tpt != IL_INVALID_VALUE) {
/* Higher rate has better throughput */
if (high_tpt > current_tpt &&
- sr >= IL_RATE_INCREASE_TH) {
+ sr >= RATE_INCREASE_TH) {
scale_action = 1;
} else {
scale_action = 0;
@@ -2026,7 +2026,7 @@
D_RATE(
"decrease rate because of low tpt\n");
scale_action = -1;
- } else if (sr >= IL_RATE_INCREASE_TH) {
+ } else if (sr >= RATE_INCREASE_TH) {
scale_action = 1;
}
}
@@ -2034,14 +2034,14 @@
/* Sanity check; asked for decrease, but success rate or throughput
* has been good at old rate. Don't change it. */
- if (scale_action == -1 && low != IL_RATE_INVALID &&
- (sr > IL_RATE_HIGH_TH || current_tpt > 100 * tbl->expected_tpt[low]))
+ if (scale_action == -1 && low != RATE_INVALID &&
+ (sr > RATE_HIGH_TH || current_tpt > 100 * tbl->expected_tpt[low]))
scale_action = 0;
switch (scale_action) {
case -1:
/* Decrease starting rate, update uCode's rate table */
- if (low != IL_RATE_INVALID) {
+ if (low != RATE_INVALID) {
update_lq = 1;
index = low;
}
@@ -2049,7 +2049,7 @@
break;
case 1:
/* Increase starting rate, update uCode's rate table */
- if (high != IL_RATE_INVALID) {
+ if (high != RATE_INVALID) {
update_lq = 1;
index = high;
}
@@ -2102,7 +2102,7 @@
if (lq_sta->search_better_tbl) {
/* Access the "search" table, clear its history. */
tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
- for (i = 0; i < IL_RATE_COUNT; i++)
+ for (i = 0; i < RATE_COUNT; i++)
il4965_rs_rate_scale_clear_win(
&(tbl->win[i]));
@@ -2208,7 +2208,7 @@
tbl = &(lq_sta->lq_info[active_tbl]);
- if (i < 0 || i >= IL_RATE_COUNT)
+ if (i < 0 || i >= RATE_COUNT)
i = 0;
rate = il_rates[i].plcp;
@@ -2251,7 +2251,7 @@
lq_sta->max_rate_idx != -1)
lq_sta->max_rate_idx += IL_FIRST_OFDM_RATE;
if (lq_sta->max_rate_idx < 0 ||
- lq_sta->max_rate_idx >= IL_RATE_COUNT)
+ lq_sta->max_rate_idx >= RATE_COUNT)
lq_sta->max_rate_idx = -1;
}
@@ -2275,7 +2275,7 @@
/* 6M and 9M shared same MCS index */
rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0;
if (il4965_rs_extract_rate(lq_sta->last_rate_n_flags) >=
- IL_RATE_MIMO2_6M_PLCP)
+ RATE_MIMO2_6M_PLCP)
rate_idx = rate_idx + MCS_INDEX_PER_STREAM;
info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK)
@@ -2292,7 +2292,7 @@
IEEE80211_TX_RC_GREEN_FIELD;
} else {
/* Check for invalid rates */
- if (rate_idx < 0 || rate_idx >= IL_RATE_COUNT_LEGACY ||
+ if (rate_idx < 0 || rate_idx >= RATE_COUNT_LEGACY ||
(sband->band == IEEE80211_BAND_5GHZ &&
rate_idx < IL_FIRST_OFDM_RATE))
rate_idx = rate_lowest_index(sband, sta);
@@ -2345,14 +2345,14 @@
lq_sta->lq.sta_id = sta_id;
for (j = 0; j < LQ_SIZE; j++)
- for (i = 0; i < IL_RATE_COUNT; i++)
+ for (i = 0; i < RATE_COUNT; i++)
il4965_rs_rate_scale_clear_win(
&lq_sta->lq_info[j].win[i]);
lq_sta->flush_timer = 0;
lq_sta->supp_rates = sta->supp_rates[sband->band];
for (j = 0; j < LQ_SIZE; j++)
- for (i = 0; i < IL_RATE_COUNT; i++)
+ for (i = 0; i < RATE_COUNT; i++)
il4965_rs_rate_scale_clear_win(
&lq_sta->lq_info[j].win[i]);
@@ -2745,7 +2745,7 @@
lq_sta->lq_info[i].is_dup,
lq_sta->is_green,
lq_sta->lq_info[i].current_rate);
- for (j = 0; j < IL_RATE_COUNT; j++) {
+ for (j = 0; j < RATE_COUNT; j++) {
desc += sprintf(buff+desc,
"counter=%d success=%d %%=%d\n",
lq_sta->lq_info[i].win[j].counter,