| /* |
| * linux/drivers/net/ehea/ehea_ethtool.c |
| * |
| * eHEA ethernet device driver for IBM eServer System p |
| * |
| * (C) Copyright IBM Corp. 2006 |
| * |
| * Authors: |
| * Christoph Raisch <raisch@de.ibm.com> |
| * Jan-Bernd Themann <themann@de.ibm.com> |
| * Thomas Klein <tklein@de.ibm.com> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "ehea.h" |
| #include "ehea_phyp.h" |
| |
| static int ehea_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| int ret; |
| |
| ret = ehea_sense_port_attr(port); |
| |
| if (ret) |
| return ret; |
| |
| if (netif_carrier_ok(dev)) { |
| switch(port->port_speed) { |
| case EHEA_SPEED_10M: cmd->speed = SPEED_10; break; |
| case EHEA_SPEED_100M: cmd->speed = SPEED_100; break; |
| case EHEA_SPEED_1G: cmd->speed = SPEED_1000; break; |
| case EHEA_SPEED_10G: cmd->speed = SPEED_10000; break; |
| } |
| cmd->duplex = port->full_duplex == 1 ? |
| DUPLEX_FULL : DUPLEX_HALF; |
| } else { |
| cmd->speed = -1; |
| cmd->duplex = -1; |
| } |
| |
| cmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_1000baseT_Full |
| | SUPPORTED_100baseT_Full | SUPPORTED_100baseT_Half |
| | SUPPORTED_10baseT_Full | SUPPORTED_10baseT_Half |
| | SUPPORTED_Autoneg | SUPPORTED_FIBRE); |
| |
| cmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_Autoneg |
| | ADVERTISED_FIBRE); |
| |
| cmd->port = PORT_FIBRE; |
| cmd->autoneg = port->autoneg == 1 ? AUTONEG_ENABLE : AUTONEG_DISABLE; |
| |
| return 0; |
| } |
| |
| static int ehea_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| int ret = 0; |
| u32 sp; |
| |
| if (cmd->autoneg == AUTONEG_ENABLE) { |
| sp = EHEA_SPEED_AUTONEG; |
| goto doit; |
| } |
| |
| switch(cmd->speed) { |
| case SPEED_10: |
| if (cmd->duplex == DUPLEX_FULL) |
| sp = H_SPEED_10M_F; |
| else |
| sp = H_SPEED_10M_H; |
| break; |
| |
| case SPEED_100: |
| if (cmd->duplex == DUPLEX_FULL) |
| sp = H_SPEED_100M_F; |
| else |
| sp = H_SPEED_100M_H; |
| break; |
| |
| case SPEED_1000: |
| if (cmd->duplex == DUPLEX_FULL) |
| sp = H_SPEED_1G_F; |
| else |
| ret = -EINVAL; |
| break; |
| |
| case SPEED_10000: |
| if (cmd->duplex == DUPLEX_FULL) |
| sp = H_SPEED_10G_F; |
| else |
| ret = -EINVAL; |
| break; |
| |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| if (ret) |
| goto out; |
| doit: |
| ret = ehea_set_portspeed(port, sp); |
| |
| if (!ret) |
| ehea_info("%s: Port speed succesfully set: %dMbps " |
| "%s Duplex", |
| port->netdev->name, port->port_speed, |
| port->full_duplex == 1 ? "Full" : "Half"); |
| out: |
| return ret; |
| } |
| |
| static int ehea_nway_reset(struct net_device *dev) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| int ret; |
| |
| ret = ehea_set_portspeed(port, EHEA_SPEED_AUTONEG); |
| |
| if (!ret) |
| ehea_info("%s: Port speed succesfully set: %dMbps " |
| "%s Duplex", |
| port->netdev->name, port->port_speed, |
| port->full_duplex == 1 ? "Full" : "Half"); |
| return ret; |
| } |
| |
| static void ehea_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); |
| strlcpy(info->version, DRV_VERSION, sizeof(info->version)); |
| } |
| |
| static u32 ehea_get_msglevel(struct net_device *dev) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| return port->msg_enable; |
| } |
| |
| static void ehea_set_msglevel(struct net_device *dev, u32 value) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| port->msg_enable = value; |
| } |
| |
| static u32 ehea_get_rx_csum(struct net_device *dev) |
| { |
| return 1; |
| } |
| |
| static char ehea_ethtool_stats_keys[][ETH_GSTRING_LEN] = { |
| {"sig_comp_iv"}, |
| {"swqe_refill_th"}, |
| {"port resets"}, |
| {"Receive errors"}, |
| {"TCP cksum errors"}, |
| {"IP cksum errors"}, |
| {"Frame cksum errors"}, |
| {"num SQ stopped"}, |
| {"SQ stopped"}, |
| {"PR0 free_swqes"}, |
| {"PR1 free_swqes"}, |
| {"PR2 free_swqes"}, |
| {"PR3 free_swqes"}, |
| {"PR4 free_swqes"}, |
| {"PR5 free_swqes"}, |
| {"PR6 free_swqes"}, |
| {"PR7 free_swqes"}, |
| }; |
| |
| static void ehea_get_strings(struct net_device *dev, u32 stringset, u8 *data) |
| { |
| if (stringset == ETH_SS_STATS) { |
| memcpy(data, &ehea_ethtool_stats_keys, |
| sizeof(ehea_ethtool_stats_keys)); |
| } |
| } |
| |
| static int ehea_get_stats_count(struct net_device *dev) |
| { |
| return ARRAY_SIZE(ehea_ethtool_stats_keys); |
| } |
| |
| static void ehea_get_ethtool_stats(struct net_device *dev, |
| struct ethtool_stats *stats, u64 *data) |
| { |
| int i, k, tmp; |
| struct ehea_port *port = netdev_priv(dev); |
| |
| for (i = 0; i < ehea_get_stats_count(dev); i++) |
| data[i] = 0; |
| i = 0; |
| |
| data[i++] = port->sig_comp_iv; |
| data[i++] = port->port_res[0].swqe_refill_th; |
| data[i++] = port->resets; |
| |
| for (k = 0, tmp = 0; k < EHEA_MAX_PORT_RES; k++) |
| tmp += port->port_res[k].p_stats.poll_receive_errors; |
| data[i++] = tmp; |
| |
| for (k = 0, tmp = 0; k < EHEA_MAX_PORT_RES; k++) |
| tmp += port->port_res[k].p_stats.err_tcp_cksum; |
| data[i++] = tmp; |
| |
| for (k = 0, tmp = 0; k < EHEA_MAX_PORT_RES; k++) |
| tmp += port->port_res[k].p_stats.err_ip_cksum; |
| data[i++] = tmp; |
| |
| for (k = 0, tmp = 0; k < EHEA_MAX_PORT_RES; k++) |
| tmp += port->port_res[k].p_stats.err_frame_crc; |
| data[i++] = tmp; |
| |
| for (k = 0, tmp = 0; k < EHEA_MAX_PORT_RES; k++) |
| tmp += port->port_res[k].p_stats.queue_stopped; |
| data[i++] = tmp; |
| |
| for (k = 0, tmp = 0; k < EHEA_MAX_PORT_RES; k++) |
| tmp |= port->port_res[k].queue_stopped; |
| data[i++] = tmp; |
| |
| for (k = 0; k < 8; k++) |
| data[i++] = atomic_read(&port->port_res[k].swqe_avail); |
| |
| } |
| |
| const struct ethtool_ops ehea_ethtool_ops = { |
| .get_settings = ehea_get_settings, |
| .get_drvinfo = ehea_get_drvinfo, |
| .get_msglevel = ehea_get_msglevel, |
| .set_msglevel = ehea_set_msglevel, |
| .get_link = ethtool_op_get_link, |
| .get_tx_csum = ethtool_op_get_tx_csum, |
| .get_sg = ethtool_op_get_sg, |
| .get_tso = ethtool_op_get_tso, |
| .set_tso = ethtool_op_set_tso, |
| .get_strings = ehea_get_strings, |
| .get_stats_count = ehea_get_stats_count, |
| .get_ethtool_stats = ehea_get_ethtool_stats, |
| .get_rx_csum = ehea_get_rx_csum, |
| .set_settings = ehea_set_settings, |
| .nway_reset = ehea_nway_reset, /* Restart autonegotiation */ |
| }; |
| |
| void ehea_set_ethtool_ops(struct net_device *netdev) |
| { |
| SET_ETHTOOL_OPS(netdev, &ehea_ethtool_ops); |
| } |