| /* |
| * Wireless utility functions |
| * |
| * Copyright 2007-2009 Johannes Berg <johannes@sipsolutions.net> |
| */ |
| #include <linux/bitops.h> |
| #include <linux/etherdevice.h> |
| #include <linux/slab.h> |
| #include <linux/crc32.h> |
| #include <net/cfg80211.h> |
| #include <net/ip.h> |
| #include "core.h" |
| |
| struct ieee80211_rate * |
| ieee80211_get_response_rate(struct ieee80211_supported_band *sband, |
| u32 basic_rates, int bitrate) |
| { |
| struct ieee80211_rate *result = &sband->bitrates[0]; |
| int i; |
| |
| for (i = 0; i < sband->n_bitrates; i++) { |
| if (!(basic_rates & BIT(i))) |
| continue; |
| if (sband->bitrates[i].bitrate > bitrate) |
| continue; |
| result = &sband->bitrates[i]; |
| } |
| |
| return result; |
| } |
| EXPORT_SYMBOL(ieee80211_get_response_rate); |
| |
| int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band) |
| { |
| /* see 802.11 17.3.8.3.2 and Annex J |
| * there are overlapping channel numbers in 5GHz and 2GHz bands */ |
| if (band == IEEE80211_BAND_5GHZ) { |
| if (chan >= 182 && chan <= 196) |
| return 4000 + chan * 5; |
| else |
| return 5000 + chan * 5; |
| } else { /* IEEE80211_BAND_2GHZ */ |
| if (chan == 14) |
| return 2484; |
| else if (chan < 14) |
| return 2407 + chan * 5; |
| else |
| return 0; /* not supported */ |
| } |
| } |
| EXPORT_SYMBOL(ieee80211_channel_to_frequency); |
| |
| int ieee80211_frequency_to_channel(int freq) |
| { |
| /* see 802.11 17.3.8.3.2 and Annex J */ |
| if (freq == 2484) |
| return 14; |
| else if (freq < 2484) |
| return (freq - 2407) / 5; |
| else if (freq >= 4910 && freq <= 4980) |
| return (freq - 4000) / 5; |
| else |
| return (freq - 5000) / 5; |
| } |
| EXPORT_SYMBOL(ieee80211_frequency_to_channel); |
| |
| struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, |
| int freq) |
| { |
| enum ieee80211_band band; |
| struct ieee80211_supported_band *sband; |
| int i; |
| |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) { |
| sband = wiphy->bands[band]; |
| |
| if (!sband) |
| continue; |
| |
| for (i = 0; i < sband->n_channels; i++) { |
| if (sband->channels[i].center_freq == freq) |
| return &sband->channels[i]; |
| } |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(__ieee80211_get_channel); |
| |
| static void set_mandatory_flags_band(struct ieee80211_supported_band *sband, |
| enum ieee80211_band band) |
| { |
| int i, want; |
| |
| switch (band) { |
| case IEEE80211_BAND_5GHZ: |
| want = 3; |
| for (i = 0; i < sband->n_bitrates; i++) { |
| if (sband->bitrates[i].bitrate == 60 || |
| sband->bitrates[i].bitrate == 120 || |
| sband->bitrates[i].bitrate == 240) { |
| sband->bitrates[i].flags |= |
| IEEE80211_RATE_MANDATORY_A; |
| want--; |
| } |
| } |
| WARN_ON(want); |
| break; |
| case IEEE80211_BAND_2GHZ: |
| want = 7; |
| for (i = 0; i < sband->n_bitrates; i++) { |
| if (sband->bitrates[i].bitrate == 10) { |
| sband->bitrates[i].flags |= |
| IEEE80211_RATE_MANDATORY_B | |
| IEEE80211_RATE_MANDATORY_G; |
| want--; |
| } |
| |
| if (sband->bitrates[i].bitrate == 20 || |
| sband->bitrates[i].bitrate == 55 || |
| sband->bitrates[i].bitrate == 110 || |
| sband->bitrates[i].bitrate == 60 || |
| sband->bitrates[i].bitrate == 120 || |
| sband->bitrates[i].bitrate == 240) { |
| sband->bitrates[i].flags |= |
| IEEE80211_RATE_MANDATORY_G; |
| want--; |
| } |
| |
| if (sband->bitrates[i].bitrate != 10 && |
| sband->bitrates[i].bitrate != 20 && |
| sband->bitrates[i].bitrate != 55 && |
| sband->bitrates[i].bitrate != 110) |
| sband->bitrates[i].flags |= |
| IEEE80211_RATE_ERP_G; |
| } |
| WARN_ON(want != 0 && want != 3 && want != 6); |
| break; |
| case IEEE80211_NUM_BANDS: |
| WARN_ON(1); |
| break; |
| } |
| } |
| |
| void ieee80211_set_bitrate_flags(struct wiphy *wiphy) |
| { |
| enum ieee80211_band band; |
| |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) |
| if (wiphy->bands[band]) |
| set_mandatory_flags_band(wiphy->bands[band], band); |
| } |
| |
| bool cfg80211_supported_cipher_suite(struct wiphy *wiphy, u32 cipher) |
| { |
| int i; |
| for (i = 0; i < wiphy->n_cipher_suites; i++) |
| if (cipher == wiphy->cipher_suites[i]) |
| return true; |
| return false; |
| } |
| |
| int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev, |
| struct key_params *params, int key_idx, |
| bool pairwise, const u8 *mac_addr) |
| { |
| if (key_idx > 5) |
| return -EINVAL; |
| |
| if (!pairwise && mac_addr && !(rdev->wiphy.flags & WIPHY_FLAG_IBSS_RSN)) |
| return -EINVAL; |
| |
| if (pairwise && !mac_addr) |
| return -EINVAL; |
| |
| /* |
| * Disallow pairwise keys with non-zero index unless it's WEP |
| * or a vendor specific cipher (because current deployments use |
| * pairwise WEP keys with non-zero indices and for vendor specific |
| * ciphers this should be validated in the driver or hardware level |
| * - but 802.11i clearly specifies to use zero) |
| */ |
| if (pairwise && key_idx && |
| ((params->cipher == WLAN_CIPHER_SUITE_TKIP) || |
| (params->cipher == WLAN_CIPHER_SUITE_CCMP) || |
| (params->cipher == WLAN_CIPHER_SUITE_AES_CMAC))) |
| return -EINVAL; |
| |
| switch (params->cipher) { |
| case WLAN_CIPHER_SUITE_WEP40: |
| if (params->key_len != WLAN_KEY_LEN_WEP40) |
| return -EINVAL; |
| break; |
| case WLAN_CIPHER_SUITE_TKIP: |
| if (params->key_len != WLAN_KEY_LEN_TKIP) |
| return -EINVAL; |
| break; |
| case WLAN_CIPHER_SUITE_CCMP: |
| if (params->key_len != WLAN_KEY_LEN_CCMP) |
| return -EINVAL; |
| break; |
| case WLAN_CIPHER_SUITE_WEP104: |
| if (params->key_len != WLAN_KEY_LEN_WEP104) |
| return -EINVAL; |
| break; |
| case WLAN_CIPHER_SUITE_AES_CMAC: |
| if (params->key_len != WLAN_KEY_LEN_AES_CMAC) |
| return -EINVAL; |
| break; |
| default: |
| /* |
| * We don't know anything about this algorithm, |
| * allow using it -- but the driver must check |
| * all parameters! We still check below whether |
| * or not the driver supports this algorithm, |
| * of course. |
| */ |
| break; |
| } |
| |
| if (params->seq) { |
| switch (params->cipher) { |
| case WLAN_CIPHER_SUITE_WEP40: |
| case WLAN_CIPHER_SUITE_WEP104: |
| /* These ciphers do not use key sequence */ |
| return -EINVAL; |
| case WLAN_CIPHER_SUITE_TKIP: |
| case WLAN_CIPHER_SUITE_CCMP: |
| case WLAN_CIPHER_SUITE_AES_CMAC: |
| if (params->seq_len != 6) |
| return -EINVAL; |
| break; |
| } |
| } |
| |
| if (!cfg80211_supported_cipher_suite(&rdev->wiphy, params->cipher)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ |
| /* Ethernet-II snap header (RFC1042 for most EtherTypes) */ |
| const unsigned char rfc1042_header[] __aligned(2) = |
| { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; |
| EXPORT_SYMBOL(rfc1042_header); |
| |
| /* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ |
| const unsigned char bridge_tunnel_header[] __aligned(2) = |
| { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; |
| EXPORT_SYMBOL(bridge_tunnel_header); |
| |
| unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc) |
| { |
| unsigned int hdrlen = 24; |
| |
| if (ieee80211_is_data(fc)) { |
| if (ieee80211_has_a4(fc)) |
| hdrlen = 30; |
| if (ieee80211_is_data_qos(fc)) { |
| hdrlen += IEEE80211_QOS_CTL_LEN; |
| if (ieee80211_has_order(fc)) |
| hdrlen += IEEE80211_HT_CTL_LEN; |
| } |
| goto out; |
| } |
| |
| if (ieee80211_is_ctl(fc)) { |
| /* |
| * ACK and CTS are 10 bytes, all others 16. To see how |
| * to get this condition consider |
| * subtype mask: 0b0000000011110000 (0x00F0) |
| * ACK subtype: 0b0000000011010000 (0x00D0) |
| * CTS subtype: 0b0000000011000000 (0x00C0) |
| * bits that matter: ^^^ (0x00E0) |
| * value of those: 0b0000000011000000 (0x00C0) |
| */ |
| if ((fc & cpu_to_le16(0x00E0)) == cpu_to_le16(0x00C0)) |
| hdrlen = 10; |
| else |
| hdrlen = 16; |
| } |
| out: |
| return hdrlen; |
| } |
| EXPORT_SYMBOL(ieee80211_hdrlen); |
| |
| unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb) |
| { |
| const struct ieee80211_hdr *hdr = |
| (const struct ieee80211_hdr *)skb->data; |
| unsigned int hdrlen; |
| |
| if (unlikely(skb->len < 10)) |
| return 0; |
| hdrlen = ieee80211_hdrlen(hdr->frame_control); |
| if (unlikely(hdrlen > skb->len)) |
| return 0; |
| return hdrlen; |
| } |
| EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb); |
| |
| static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) |
| { |
| int ae = meshhdr->flags & MESH_FLAGS_AE; |
| /* 7.1.3.5a.2 */ |
| switch (ae) { |
| case 0: |
| return 6; |
| case MESH_FLAGS_AE_A4: |
| return 12; |
| case MESH_FLAGS_AE_A5_A6: |
| return 18; |
| case (MESH_FLAGS_AE_A4 | MESH_FLAGS_AE_A5_A6): |
| return 24; |
| default: |
| return 6; |
| } |
| } |
| |
| int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, |
| enum nl80211_iftype iftype) |
| { |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u16 hdrlen, ethertype; |
| u8 *payload; |
| u8 dst[ETH_ALEN]; |
| u8 src[ETH_ALEN] __aligned(2); |
| |
| if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) |
| return -1; |
| |
| hdrlen = ieee80211_hdrlen(hdr->frame_control); |
| |
| /* convert IEEE 802.11 header + possible LLC headers into Ethernet |
| * header |
| * IEEE 802.11 address fields: |
| * ToDS FromDS Addr1 Addr2 Addr3 Addr4 |
| * 0 0 DA SA BSSID n/a |
| * 0 1 DA BSSID SA n/a |
| * 1 0 BSSID SA DA n/a |
| * 1 1 RA TA DA SA |
| */ |
| memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN); |
| memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN); |
| |
| switch (hdr->frame_control & |
| cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) { |
| case cpu_to_le16(IEEE80211_FCTL_TODS): |
| if (unlikely(iftype != NL80211_IFTYPE_AP && |
| iftype != NL80211_IFTYPE_AP_VLAN && |
| iftype != NL80211_IFTYPE_P2P_GO)) |
| return -1; |
| break; |
| case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS): |
| if (unlikely(iftype != NL80211_IFTYPE_WDS && |
| iftype != NL80211_IFTYPE_MESH_POINT && |
| iftype != NL80211_IFTYPE_AP_VLAN && |
| iftype != NL80211_IFTYPE_STATION)) |
| return -1; |
| if (iftype == NL80211_IFTYPE_MESH_POINT) { |
| struct ieee80211s_hdr *meshdr = |
| (struct ieee80211s_hdr *) (skb->data + hdrlen); |
| /* make sure meshdr->flags is on the linear part */ |
| if (!pskb_may_pull(skb, hdrlen + 1)) |
| return -1; |
| if (meshdr->flags & MESH_FLAGS_AE_A5_A6) { |
| skb_copy_bits(skb, hdrlen + |
| offsetof(struct ieee80211s_hdr, eaddr1), |
| dst, ETH_ALEN); |
| skb_copy_bits(skb, hdrlen + |
| offsetof(struct ieee80211s_hdr, eaddr2), |
| src, ETH_ALEN); |
| } |
| hdrlen += ieee80211_get_mesh_hdrlen(meshdr); |
| } |
| break; |
| case cpu_to_le16(IEEE80211_FCTL_FROMDS): |
| if ((iftype != NL80211_IFTYPE_STATION && |
| iftype != NL80211_IFTYPE_P2P_CLIENT && |
| iftype != NL80211_IFTYPE_MESH_POINT) || |
| (is_multicast_ether_addr(dst) && |
| !compare_ether_addr(src, addr))) |
| return -1; |
| if (iftype == NL80211_IFTYPE_MESH_POINT) { |
| struct ieee80211s_hdr *meshdr = |
| (struct ieee80211s_hdr *) (skb->data + hdrlen); |
| /* make sure meshdr->flags is on the linear part */ |
| if (!pskb_may_pull(skb, hdrlen + 1)) |
| return -1; |
| if (meshdr->flags & MESH_FLAGS_AE_A4) |
| skb_copy_bits(skb, hdrlen + |
| offsetof(struct ieee80211s_hdr, eaddr1), |
| src, ETH_ALEN); |
| hdrlen += ieee80211_get_mesh_hdrlen(meshdr); |
| } |
| break; |
| case cpu_to_le16(0): |
| if (iftype != NL80211_IFTYPE_ADHOC && |
| iftype != NL80211_IFTYPE_STATION) |
| return -1; |
| break; |
| } |
| |
| if (!pskb_may_pull(skb, hdrlen + 8)) |
| return -1; |
| |
| payload = skb->data + hdrlen; |
| ethertype = (payload[6] << 8) | payload[7]; |
| |
| if (likely((compare_ether_addr(payload, rfc1042_header) == 0 && |
| ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || |
| compare_ether_addr(payload, bridge_tunnel_header) == 0)) { |
| /* remove RFC1042 or Bridge-Tunnel encapsulation and |
| * replace EtherType */ |
| skb_pull(skb, hdrlen + 6); |
| memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN); |
| memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN); |
| } else { |
| struct ethhdr *ehdr; |
| __be16 len; |
| |
| skb_pull(skb, hdrlen); |
| len = htons(skb->len); |
| ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr)); |
| memcpy(ehdr->h_dest, dst, ETH_ALEN); |
| memcpy(ehdr->h_source, src, ETH_ALEN); |
| ehdr->h_proto = len; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(ieee80211_data_to_8023); |
| |
| int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr, |
| enum nl80211_iftype iftype, u8 *bssid, bool qos) |
| { |
| struct ieee80211_hdr hdr; |
| u16 hdrlen, ethertype; |
| __le16 fc; |
| const u8 *encaps_data; |
| int encaps_len, skip_header_bytes; |
| int nh_pos, h_pos; |
| int head_need; |
| |
| if (unlikely(skb->len < ETH_HLEN)) |
| return -EINVAL; |
| |
| nh_pos = skb_network_header(skb) - skb->data; |
| h_pos = skb_transport_header(skb) - skb->data; |
| |
| /* convert Ethernet header to proper 802.11 header (based on |
| * operation mode) */ |
| ethertype = (skb->data[12] << 8) | skb->data[13]; |
| fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA); |
| |
| switch (iftype) { |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_AP_VLAN: |
| case NL80211_IFTYPE_P2P_GO: |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); |
| /* DA BSSID SA */ |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); |
| memcpy(hdr.addr2, addr, ETH_ALEN); |
| memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN); |
| hdrlen = 24; |
| break; |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_P2P_CLIENT: |
| fc |= cpu_to_le16(IEEE80211_FCTL_TODS); |
| /* BSSID SA DA */ |
| memcpy(hdr.addr1, bssid, ETH_ALEN); |
| memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); |
| memcpy(hdr.addr3, skb->data, ETH_ALEN); |
| hdrlen = 24; |
| break; |
| case NL80211_IFTYPE_ADHOC: |
| /* DA SA BSSID */ |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); |
| memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); |
| memcpy(hdr.addr3, bssid, ETH_ALEN); |
| hdrlen = 24; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| if (qos) { |
| fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA); |
| hdrlen += 2; |
| } |
| |
| hdr.frame_control = fc; |
| hdr.duration_id = 0; |
| hdr.seq_ctrl = 0; |
| |
| skip_header_bytes = ETH_HLEN; |
| if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) { |
| encaps_data = bridge_tunnel_header; |
| encaps_len = sizeof(bridge_tunnel_header); |
| skip_header_bytes -= 2; |
| } else if (ethertype > 0x600) { |
| encaps_data = rfc1042_header; |
| encaps_len = sizeof(rfc1042_header); |
| skip_header_bytes -= 2; |
| } else { |
| encaps_data = NULL; |
| encaps_len = 0; |
| } |
| |
| skb_pull(skb, skip_header_bytes); |
| nh_pos -= skip_header_bytes; |
| h_pos -= skip_header_bytes; |
| |
| head_need = hdrlen + encaps_len - skb_headroom(skb); |
| |
| if (head_need > 0 || skb_cloned(skb)) { |
| head_need = max(head_need, 0); |
| if (head_need) |
| skb_orphan(skb); |
| |
| if (pskb_expand_head(skb, head_need, 0, GFP_ATOMIC)) |
| return -ENOMEM; |
| |
| skb->truesize += head_need; |
| } |
| |
| if (encaps_data) { |
| memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len); |
| nh_pos += encaps_len; |
| h_pos += encaps_len; |
| } |
| |
| memcpy(skb_push(skb, hdrlen), &hdr, hdrlen); |
| |
| nh_pos += hdrlen; |
| h_pos += hdrlen; |
| |
| /* Update skb pointers to various headers since this modified frame |
| * is going to go through Linux networking code that may potentially |
| * need things like pointer to IP header. */ |
| skb_set_mac_header(skb, 0); |
| skb_set_network_header(skb, nh_pos); |
| skb_set_transport_header(skb, h_pos); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(ieee80211_data_from_8023); |
| |
| |
| void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, |
| const u8 *addr, enum nl80211_iftype iftype, |
| const unsigned int extra_headroom, |
| bool has_80211_header) |
| { |
| struct sk_buff *frame = NULL; |
| u16 ethertype; |
| u8 *payload; |
| const struct ethhdr *eth; |
| int remaining, err; |
| u8 dst[ETH_ALEN], src[ETH_ALEN]; |
| |
| if (has_80211_header) { |
| err = ieee80211_data_to_8023(skb, addr, iftype); |
| if (err) |
| goto out; |
| |
| /* skip the wrapping header */ |
| eth = (struct ethhdr *) skb_pull(skb, sizeof(struct ethhdr)); |
| if (!eth) |
| goto out; |
| } else { |
| eth = (struct ethhdr *) skb->data; |
| } |
| |
| while (skb != frame) { |
| u8 padding; |
| __be16 len = eth->h_proto; |
| unsigned int subframe_len = sizeof(struct ethhdr) + ntohs(len); |
| |
| remaining = skb->len; |
| memcpy(dst, eth->h_dest, ETH_ALEN); |
| memcpy(src, eth->h_source, ETH_ALEN); |
| |
| padding = (4 - subframe_len) & 0x3; |
| /* the last MSDU has no padding */ |
| if (subframe_len > remaining) |
| goto purge; |
| |
| skb_pull(skb, sizeof(struct ethhdr)); |
| /* reuse skb for the last subframe */ |
| if (remaining <= subframe_len + padding) |
| frame = skb; |
| else { |
| unsigned int hlen = ALIGN(extra_headroom, 4); |
| /* |
| * Allocate and reserve two bytes more for payload |
| * alignment since sizeof(struct ethhdr) is 14. |
| */ |
| frame = dev_alloc_skb(hlen + subframe_len + 2); |
| if (!frame) |
| goto purge; |
| |
| skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2); |
| memcpy(skb_put(frame, ntohs(len)), skb->data, |
| ntohs(len)); |
| |
| eth = (struct ethhdr *)skb_pull(skb, ntohs(len) + |
| padding); |
| if (!eth) { |
| dev_kfree_skb(frame); |
| goto purge; |
| } |
| } |
| |
| skb_reset_network_header(frame); |
| frame->dev = skb->dev; |
| frame->priority = skb->priority; |
| |
| payload = frame->data; |
| ethertype = (payload[6] << 8) | payload[7]; |
| |
| if (likely((compare_ether_addr(payload, rfc1042_header) == 0 && |
| ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || |
| compare_ether_addr(payload, |
| bridge_tunnel_header) == 0)) { |
| /* remove RFC1042 or Bridge-Tunnel |
| * encapsulation and replace EtherType */ |
| skb_pull(frame, 6); |
| memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN); |
| memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN); |
| } else { |
| memcpy(skb_push(frame, sizeof(__be16)), &len, |
| sizeof(__be16)); |
| memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN); |
| memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN); |
| } |
| __skb_queue_tail(list, frame); |
| } |
| |
| return; |
| |
| purge: |
| __skb_queue_purge(list); |
| out: |
| dev_kfree_skb(skb); |
| } |
| EXPORT_SYMBOL(ieee80211_amsdu_to_8023s); |
| |
| /* Given a data frame determine the 802.1p/1d tag to use. */ |
| unsigned int cfg80211_classify8021d(struct sk_buff *skb) |
| { |
| unsigned int dscp; |
| |
| /* skb->priority values from 256->263 are magic values to |
| * directly indicate a specific 802.1d priority. This is used |
| * to allow 802.1d priority to be passed directly in from VLAN |
| * tags, etc. |
| */ |
| if (skb->priority >= 256 && skb->priority <= 263) |
| return skb->priority - 256; |
| |
| switch (skb->protocol) { |
| case htons(ETH_P_IP): |
| dscp = ip_hdr(skb)->tos & 0xfc; |
| break; |
| default: |
| return 0; |
| } |
| |
| return dscp >> 5; |
| } |
| EXPORT_SYMBOL(cfg80211_classify8021d); |
| |
| const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie) |
| { |
| u8 *end, *pos; |
| |
| pos = bss->information_elements; |
| if (pos == NULL) |
| return NULL; |
| end = pos + bss->len_information_elements; |
| |
| while (pos + 1 < end) { |
| if (pos + 2 + pos[1] > end) |
| break; |
| if (pos[0] == ie) |
| return pos; |
| pos += 2 + pos[1]; |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(ieee80211_bss_get_ie); |
| |
| void cfg80211_upload_connect_keys(struct wireless_dev *wdev) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); |
| struct net_device *dev = wdev->netdev; |
| int i; |
| |
| if (!wdev->connect_keys) |
| return; |
| |
| for (i = 0; i < 6; i++) { |
| if (!wdev->connect_keys->params[i].cipher) |
| continue; |
| if (rdev->ops->add_key(wdev->wiphy, dev, i, false, NULL, |
| &wdev->connect_keys->params[i])) { |
| netdev_err(dev, "failed to set key %d\n", i); |
| continue; |
| } |
| if (wdev->connect_keys->def == i) |
| if (rdev->ops->set_default_key(wdev->wiphy, dev, |
| i, true, true)) { |
| netdev_err(dev, "failed to set defkey %d\n", i); |
| continue; |
| } |
| if (wdev->connect_keys->defmgmt == i) |
| if (rdev->ops->set_default_mgmt_key(wdev->wiphy, dev, i)) |
| netdev_err(dev, "failed to set mgtdef %d\n", i); |
| } |
| |
| kfree(wdev->connect_keys); |
| wdev->connect_keys = NULL; |
| } |
| |
| static void cfg80211_process_wdev_events(struct wireless_dev *wdev) |
| { |
| struct cfg80211_event *ev; |
| unsigned long flags; |
| const u8 *bssid = NULL; |
| |
| spin_lock_irqsave(&wdev->event_lock, flags); |
| while (!list_empty(&wdev->event_list)) { |
| ev = list_first_entry(&wdev->event_list, |
| struct cfg80211_event, list); |
| list_del(&ev->list); |
| spin_unlock_irqrestore(&wdev->event_lock, flags); |
| |
| wdev_lock(wdev); |
| switch (ev->type) { |
| case EVENT_CONNECT_RESULT: |
| if (!is_zero_ether_addr(ev->cr.bssid)) |
| bssid = ev->cr.bssid; |
| __cfg80211_connect_result( |
| wdev->netdev, bssid, |
| ev->cr.req_ie, ev->cr.req_ie_len, |
| ev->cr.resp_ie, ev->cr.resp_ie_len, |
| ev->cr.status, |
| ev->cr.status == WLAN_STATUS_SUCCESS, |
| NULL); |
| break; |
| case EVENT_ROAMED: |
| __cfg80211_roamed(wdev, ev->rm.channel, ev->rm.bssid, |
| ev->rm.req_ie, ev->rm.req_ie_len, |
| ev->rm.resp_ie, ev->rm.resp_ie_len); |
| break; |
| case EVENT_DISCONNECTED: |
| __cfg80211_disconnected(wdev->netdev, |
| ev->dc.ie, ev->dc.ie_len, |
| ev->dc.reason, true); |
| break; |
| case EVENT_IBSS_JOINED: |
| __cfg80211_ibss_joined(wdev->netdev, ev->ij.bssid); |
| break; |
| } |
| wdev_unlock(wdev); |
| |
| kfree(ev); |
| |
| spin_lock_irqsave(&wdev->event_lock, flags); |
| } |
| spin_unlock_irqrestore(&wdev->event_lock, flags); |
| } |
| |
| void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev) |
| { |
| struct wireless_dev *wdev; |
| |
| ASSERT_RTNL(); |
| ASSERT_RDEV_LOCK(rdev); |
| |
| mutex_lock(&rdev->devlist_mtx); |
| |
| list_for_each_entry(wdev, &rdev->netdev_list, list) |
| cfg80211_process_wdev_events(wdev); |
| |
| mutex_unlock(&rdev->devlist_mtx); |
| } |
| |
| int cfg80211_change_iface(struct cfg80211_registered_device *rdev, |
| struct net_device *dev, enum nl80211_iftype ntype, |
| u32 *flags, struct vif_params *params) |
| { |
| int err; |
| enum nl80211_iftype otype = dev->ieee80211_ptr->iftype; |
| |
| ASSERT_RDEV_LOCK(rdev); |
| |
| /* don't support changing VLANs, you just re-create them */ |
| if (otype == NL80211_IFTYPE_AP_VLAN) |
| return -EOPNOTSUPP; |
| |
| if (!rdev->ops->change_virtual_intf || |
| !(rdev->wiphy.interface_modes & (1 << ntype))) |
| return -EOPNOTSUPP; |
| |
| /* if it's part of a bridge, reject changing type to station/ibss */ |
| if ((dev->priv_flags & IFF_BRIDGE_PORT) && |
| (ntype == NL80211_IFTYPE_ADHOC || |
| ntype == NL80211_IFTYPE_STATION || |
| ntype == NL80211_IFTYPE_P2P_CLIENT)) |
| return -EBUSY; |
| |
| if (ntype != otype) { |
| err = cfg80211_can_change_interface(rdev, dev->ieee80211_ptr, |
| ntype); |
| if (err) |
| return err; |
| |
| dev->ieee80211_ptr->use_4addr = false; |
| dev->ieee80211_ptr->mesh_id_up_len = 0; |
| |
| switch (otype) { |
| case NL80211_IFTYPE_ADHOC: |
| cfg80211_leave_ibss(rdev, dev, false); |
| break; |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_P2P_CLIENT: |
| cfg80211_disconnect(rdev, dev, |
| WLAN_REASON_DEAUTH_LEAVING, true); |
| break; |
| case NL80211_IFTYPE_MESH_POINT: |
| /* mesh should be handled? */ |
| break; |
| default: |
| break; |
| } |
| |
| cfg80211_process_rdev_events(rdev); |
| } |
| |
| err = rdev->ops->change_virtual_intf(&rdev->wiphy, dev, |
| ntype, flags, params); |
| |
| WARN_ON(!err && dev->ieee80211_ptr->iftype != ntype); |
| |
| if (!err && params && params->use_4addr != -1) |
| dev->ieee80211_ptr->use_4addr = params->use_4addr; |
| |
| if (!err) { |
| dev->priv_flags &= ~IFF_DONT_BRIDGE; |
| switch (ntype) { |
| case NL80211_IFTYPE_STATION: |
| if (dev->ieee80211_ptr->use_4addr) |
| break; |
| /* fall through */ |
| case NL80211_IFTYPE_P2P_CLIENT: |
| case NL80211_IFTYPE_ADHOC: |
| dev->priv_flags |= IFF_DONT_BRIDGE; |
| break; |
| case NL80211_IFTYPE_P2P_GO: |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_AP_VLAN: |
| case NL80211_IFTYPE_WDS: |
| case NL80211_IFTYPE_MESH_POINT: |
| /* bridging OK */ |
| break; |
| case NL80211_IFTYPE_MONITOR: |
| /* monitor can't bridge anyway */ |
| break; |
| case NL80211_IFTYPE_UNSPECIFIED: |
| case NUM_NL80211_IFTYPES: |
| /* not happening */ |
| break; |
| } |
| } |
| |
| return err; |
| } |
| |
| u16 cfg80211_calculate_bitrate(struct rate_info *rate) |
| { |
| int modulation, streams, bitrate; |
| |
| if (!(rate->flags & RATE_INFO_FLAGS_MCS)) |
| return rate->legacy; |
| |
| /* the formula below does only work for MCS values smaller than 32 */ |
| if (rate->mcs >= 32) |
| return 0; |
| |
| modulation = rate->mcs & 7; |
| streams = (rate->mcs >> 3) + 1; |
| |
| bitrate = (rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH) ? |
| 13500000 : 6500000; |
| |
| if (modulation < 4) |
| bitrate *= (modulation + 1); |
| else if (modulation == 4) |
| bitrate *= (modulation + 2); |
| else |
| bitrate *= (modulation + 3); |
| |
| bitrate *= streams; |
| |
| if (rate->flags & RATE_INFO_FLAGS_SHORT_GI) |
| bitrate = (bitrate / 9) * 10; |
| |
| /* do NOT round down here */ |
| return (bitrate + 50000) / 100000; |
| } |
| |
| int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev, |
| u32 beacon_int) |
| { |
| struct wireless_dev *wdev; |
| int res = 0; |
| |
| if (!beacon_int) |
| return -EINVAL; |
| |
| mutex_lock(&rdev->devlist_mtx); |
| |
| list_for_each_entry(wdev, &rdev->netdev_list, list) { |
| if (!wdev->beacon_interval) |
| continue; |
| if (wdev->beacon_interval != beacon_int) { |
| res = -EINVAL; |
| break; |
| } |
| } |
| |
| mutex_unlock(&rdev->devlist_mtx); |
| |
| return res; |
| } |
| |
| int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, |
| struct wireless_dev *wdev, |
| enum nl80211_iftype iftype) |
| { |
| struct wireless_dev *wdev_iter; |
| int num[NUM_NL80211_IFTYPES]; |
| int total = 1; |
| int i, j; |
| |
| ASSERT_RTNL(); |
| |
| /* Always allow software iftypes */ |
| if (rdev->wiphy.software_iftypes & BIT(iftype)) |
| return 0; |
| |
| /* |
| * Drivers will gradually all set this flag, until all |
| * have it we only enforce for those that set it. |
| */ |
| if (!(rdev->wiphy.flags & WIPHY_FLAG_ENFORCE_COMBINATIONS)) |
| return 0; |
| |
| memset(num, 0, sizeof(num)); |
| |
| num[iftype] = 1; |
| |
| mutex_lock(&rdev->devlist_mtx); |
| list_for_each_entry(wdev_iter, &rdev->netdev_list, list) { |
| if (wdev_iter == wdev) |
| continue; |
| if (!netif_running(wdev_iter->netdev)) |
| continue; |
| |
| if (rdev->wiphy.software_iftypes & BIT(wdev_iter->iftype)) |
| continue; |
| |
| num[wdev_iter->iftype]++; |
| total++; |
| } |
| mutex_unlock(&rdev->devlist_mtx); |
| |
| for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) { |
| const struct ieee80211_iface_combination *c; |
| struct ieee80211_iface_limit *limits; |
| |
| c = &rdev->wiphy.iface_combinations[i]; |
| |
| limits = kmemdup(c->limits, sizeof(limits[0]) * c->n_limits, |
| GFP_KERNEL); |
| if (!limits) |
| return -ENOMEM; |
| if (total > c->max_interfaces) |
| goto cont; |
| |
| for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) { |
| if (rdev->wiphy.software_iftypes & BIT(iftype)) |
| continue; |
| for (j = 0; j < c->n_limits; j++) { |
| if (!(limits[j].types & iftype)) |
| continue; |
| if (limits[j].max < num[iftype]) |
| goto cont; |
| limits[j].max -= num[iftype]; |
| } |
| } |
| /* yay, it fits */ |
| kfree(limits); |
| return 0; |
| cont: |
| kfree(limits); |
| } |
| |
| return -EBUSY; |
| } |
| |
| int ieee80211_get_ratemask(struct ieee80211_supported_band *sband, |
| const u8 *rates, unsigned int n_rates, |
| u32 *mask) |
| { |
| int i, j; |
| |
| if (!sband) |
| return -EINVAL; |
| |
| if (n_rates == 0 || n_rates > NL80211_MAX_SUPP_RATES) |
| return -EINVAL; |
| |
| *mask = 0; |
| |
| for (i = 0; i < n_rates; i++) { |
| int rate = (rates[i] & 0x7f) * 5; |
| bool found = false; |
| |
| for (j = 0; j < sband->n_bitrates; j++) { |
| if (sband->bitrates[j].bitrate == rate) { |
| found = true; |
| *mask |= BIT(j); |
| break; |
| } |
| } |
| if (!found) |
| return -EINVAL; |
| } |
| |
| /* |
| * mask must have at least one bit set here since we |
| * didn't accept a 0-length rates array nor allowed |
| * entries in the array that didn't exist |
| */ |
| |
| return 0; |
| } |
| |
| u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, |
| struct ieee802_11_elems *elems, |
| u64 filter, u32 crc) |
| { |
| size_t left = len; |
| u8 *pos = start; |
| bool calc_crc = filter != 0; |
| |
| memset(elems, 0, sizeof(*elems)); |
| elems->ie_start = start; |
| elems->total_len = len; |
| |
| while (left >= 2) { |
| u8 id, elen; |
| |
| id = *pos++; |
| elen = *pos++; |
| left -= 2; |
| |
| if (elen > left) |
| break; |
| |
| if (calc_crc && id < 64 && (filter & (1ULL << id))) |
| crc = crc32_be(crc, pos - 2, elen + 2); |
| |
| switch (id) { |
| case WLAN_EID_SSID: |
| elems->ssid = pos; |
| elems->ssid_len = elen; |
| break; |
| case WLAN_EID_SUPP_RATES: |
| elems->supp_rates = pos; |
| elems->supp_rates_len = elen; |
| break; |
| case WLAN_EID_FH_PARAMS: |
| elems->fh_params = pos; |
| elems->fh_params_len = elen; |
| break; |
| case WLAN_EID_DS_PARAMS: |
| elems->ds_params = pos; |
| elems->ds_params_len = elen; |
| break; |
| case WLAN_EID_CF_PARAMS: |
| elems->cf_params = pos; |
| elems->cf_params_len = elen; |
| break; |
| case WLAN_EID_TIM: |
| if (elen >= sizeof(struct ieee80211_tim_ie)) { |
| elems->tim = (void *)pos; |
| elems->tim_len = elen; |
| } |
| break; |
| case WLAN_EID_IBSS_PARAMS: |
| elems->ibss_params = pos; |
| elems->ibss_params_len = elen; |
| break; |
| case WLAN_EID_CHALLENGE: |
| elems->challenge = pos; |
| elems->challenge_len = elen; |
| break; |
| case WLAN_EID_VENDOR_SPECIFIC: |
| if (elen >= 4 && pos[0] == 0x00 && pos[1] == 0x50 && |
| pos[2] == 0xf2) { |
| /* Microsoft OUI (00:50:F2) */ |
| |
| if (calc_crc) |
| crc = crc32_be(crc, pos - 2, elen + 2); |
| |
| if (pos[3] == 1) { |
| /* OUI Type 1 - WPA IE */ |
| elems->wpa = pos; |
| elems->wpa_len = elen; |
| } else if (elen >= 5 && pos[3] == 2) { |
| /* OUI Type 2 - WMM IE */ |
| if (pos[4] == 0) { |
| elems->wmm_info = pos; |
| elems->wmm_info_len = elen; |
| } else if (pos[4] == 1) { |
| elems->wmm_param = pos; |
| elems->wmm_param_len = elen; |
| } |
| } |
| } |
| break; |
| case WLAN_EID_RSN: |
| elems->rsn = pos; |
| elems->rsn_len = elen; |
| break; |
| case WLAN_EID_ERP_INFO: |
| elems->erp_info = pos; |
| elems->erp_info_len = elen; |
| break; |
| case WLAN_EID_EXT_SUPP_RATES: |
| elems->ext_supp_rates = pos; |
| elems->ext_supp_rates_len = elen; |
| break; |
| case WLAN_EID_HT_CAPABILITY: |
| if (elen >= sizeof(struct ieee80211_ht_cap)) |
| elems->ht_cap_elem = (void *)pos; |
| break; |
| case WLAN_EID_HT_INFORMATION: |
| if (elen >= sizeof(struct ieee80211_ht_info)) |
| elems->ht_info_elem = (void *)pos; |
| break; |
| case WLAN_EID_MESH_ID: |
| elems->mesh_id = pos; |
| elems->mesh_id_len = elen; |
| break; |
| case WLAN_EID_MESH_CONFIG: |
| if (elen >= sizeof(struct ieee80211_meshconf_ie)) |
| elems->mesh_config = (void *)pos; |
| break; |
| case WLAN_EID_PEER_MGMT: |
| elems->peering = pos; |
| elems->peering_len = elen; |
| break; |
| case WLAN_EID_PREQ: |
| elems->preq = pos; |
| elems->preq_len = elen; |
| break; |
| case WLAN_EID_PREP: |
| elems->prep = pos; |
| elems->prep_len = elen; |
| break; |
| case WLAN_EID_PERR: |
| elems->perr = pos; |
| elems->perr_len = elen; |
| break; |
| case WLAN_EID_RANN: |
| if (elen >= sizeof(struct ieee80211_rann_ie)) |
| elems->rann = (void *)pos; |
| break; |
| case WLAN_EID_CHANNEL_SWITCH: |
| elems->ch_switch_elem = pos; |
| elems->ch_switch_elem_len = elen; |
| break; |
| case WLAN_EID_QUIET: |
| if (!elems->quiet_elem) { |
| elems->quiet_elem = pos; |
| elems->quiet_elem_len = elen; |
| } |
| elems->num_of_quiet_elem++; |
| break; |
| case WLAN_EID_COUNTRY: |
| elems->country_elem = pos; |
| elems->country_elem_len = elen; |
| break; |
| case WLAN_EID_PWR_CONSTRAINT: |
| elems->pwr_constr_elem = pos; |
| elems->pwr_constr_elem_len = elen; |
| break; |
| case WLAN_EID_TIMEOUT_INTERVAL: |
| elems->timeout_int = pos; |
| elems->timeout_int_len = elen; |
| break; |
| default: |
| break; |
| } |
| |
| left -= elen; |
| pos += elen; |
| } |
| |
| return crc; |
| } |
| EXPORT_SYMBOL(ieee802_11_parse_elems_crc); |