drivers/usb/serial/ark3116.c - kernel/msm-4.9 - Gitiles

 /*
  * Copyright (C) 2006
  *   Simon Schulz (ark3116_driver <at> auctionant.de)
  *
  * ark3116
  * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
  *   productid=0x0232) (used in a datacable called KQ-U8A)
  *
  * - based on code by krisfx -> thanks !!
  *   (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457)
  *
  *  - based on logs created by usbsnoopy
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
  * option) any later version.
  */

 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/serial.h>
 #include <asm/uaccess.h>


 static int debug;

 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x6547, 0x0232) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);

 struct ark3116_private {
 	spinlock_t lock;
 	u8 termios_initialized;
 };

 static inline void ARK3116_SND(struct usb_serial *serial, int seq,
 			       __u8 request, __u8 requesttype,
 			       __u16 value, __u16 index)
 {
 	int result;
 	result = usb_control_msg(serial->dev,
 				 usb_sndctrlpipe(serial->dev,0),
 				 request, requesttype, value, index,
 				 NULL,0x00, 1000);
 	dbg("%03d > ok",seq);
 }

 static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
 			       __u8 request, __u8 requesttype,
 			       __u16 value, __u16 index, __u8 expected,
 			       char *buf)
 {
 	int result;
 	result = usb_control_msg(serial->dev,
 			      usb_rcvctrlpipe(serial->dev,0),
 			      request, requesttype, value, index,
 			      buf, 0x0000001, 1000);
 	if (result)
 		dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]);
 	else
 		dbg("%03d < 0 bytes", seq);
 }


 static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
 				     __u8 request, __u8 requesttype,
 				     __u16 value, __u16 index, char *buf)
 {
 	usb_control_msg(serial->dev,
 			usb_rcvctrlpipe(serial->dev,0),
 			request, requesttype, value, index,
 			buf, 0x0000001, 1000);
 }


 static int ark3116_attach(struct usb_serial *serial)
 {
 	char *buf;
 	struct ark3116_private *priv;
 	int i;

 	for (i = 0; i < serial->num_ports; ++i) {
 		priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL);
 		if (!priv)
 			goto cleanup;
 		memset (priv, 0x00, sizeof (struct ark3116_private));
 		spin_lock_init(&priv->lock);

 		usb_set_serial_port_data(serial->port[i], priv);
 	}

 	buf = kmalloc(1, GFP_KERNEL);
 	if (!buf) {
 		dbg("error kmalloc -> out of mem ?");
 		goto cleanup;
 	}

 	/* 3 */
 	ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002);
 	ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001);
 	ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008);
 	ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B);

 	/* <-- seq7 */
 	ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf);
 	ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003);
 	ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000);
 	ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001);
 	ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003);

 	/* <-- seq12 */
 	ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
 	ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004);

 	/* 14 */
 	ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
 	ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004);

 	/* 16 */
 	ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
 	/* --> seq17 */
 	ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004);

 	/* <-- seq18 */
 	ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf);

 	/* --> seq19 */
 	ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004);


 	/* <-- seq20 */
 	/* seems like serial port status info (RTS, CTS,...) */
 	/* returns modem control line status ?! */
 	ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);

 	/* set 9600 baud & do some init ?! */
 	ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
 	ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000);
 	ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001);
 	ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
 	ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
 	ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
 	ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
 	ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003);

 	kfree(buf);
 	return(0);

 cleanup:
 	for (--i; i>=0; --i)
 		usb_set_serial_port_data(serial->port[i], NULL);
 	return -ENOMEM;
 }

 static void ark3116_set_termios(struct usb_serial_port *port,
 				struct termios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct ark3116_private *priv = usb_get_serial_port_data(port);
 	unsigned int cflag = port->tty->termios->c_cflag;
 	unsigned long flags;
 	int baud;
 	int ark3116_baud;
 	char *buf;
 	char config;

 	config = 0;

 	dbg("%s - port %d", __FUNCTION__, port->number);

 	if ((!port->tty) || (!port->tty->termios)) {
 		dbg("%s - no tty structures", __FUNCTION__);
 		return;
 	}

 	spin_lock_irqsave(&priv->lock, flags);
 	if (!priv->termios_initialized) {
 		*(port->tty->termios) = tty_std_termios;
 		port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 		priv->termios_initialized = 1;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);

 	cflag = port->tty->termios->c_cflag;

 	/* check that they really want us to change something: */
 	if (old_termios) {
 		if ((cflag == old_termios->c_cflag) &&
 		    (RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
 		     RELEVANT_IFLAG(old_termios->c_iflag))) {
 			dbg("%s - nothing to change...", __FUNCTION__);
 			return;
 		}
 	}

 	buf = kmalloc(1, GFP_KERNEL);
 	if (!buf) {
 		dbg("error kmalloc");
 		return;
 	}

 	/* set data bit count (8/7/6/5) */
 	if (cflag & CSIZE){
 		switch (cflag & CSIZE){
 		case CS5:
 			config |= 0x00;
 			dbg("setting CS5");
 			break;
 		case CS6:
 			config |= 0x01;
 			dbg("setting CS6");
 			break;
 		case CS7:
 			config |= 0x02;
 			dbg("setting CS7");
 			break;
 		default:
 			err ("CSIZE was set but not CS5-CS8, using CS8!");
 		case CS8:
 			config |= 0x03;
 			dbg("setting CS8");
 			break;
 		}
 	}

 	/* set parity (NONE,EVEN,ODD) */
 	if (cflag & PARENB){
 		if (cflag & PARODD) {
 			config |= 0x08;
 			dbg("setting parity to ODD");
 		} else {
 			config |= 0x18;
 			dbg("setting parity to EVEN");
 		}
 	} else {
 		dbg("setting parity to NONE");
 	}

 	/* SET STOPBIT (1/2) */
 	if (cflag & CSTOPB) {
 		config |= 0x04;
 		dbg ("setting 2 stop bits");
 	} else {
 		dbg ("setting 1 stop bit");
 	}


 	/* set baudrate: */
 	baud = 0;
 	switch (cflag & CBAUD){
 		case B0:
 			err("can't set 0baud, using 9600 instead");
 			break;
 		case B75:	baud = 75;	break;
 		case B150:	baud = 150;	break;
 		case B300:	baud = 300;	break;
 		case B600:	baud = 600;	break;
 		case B1200:	baud = 1200;	break;
 		case B1800:	baud = 1800;	break;
 		case B2400:	baud = 2400;	break;
 		case B4800:	baud = 4800;	break;
 		case B9600:	baud = 9600;	break;
 		case B19200:	baud = 19200;	break;
 		case B38400:	baud = 38400;	break;
 		case B57600:	baud = 57600;	break;
 		case B115200:	baud = 115200;	break;
 		case B230400:	baud = 230400;	break;
 		case B460800:	baud = 460800;	break;
 		default:
 			dbg("does not support the baudrate requested (fix it)");
 			break;
 	}

 	/* set 9600 as default (if given baudrate is invalid for example) */
 	if (baud == 0)
 		baud = 9600;

 	/*
 	 * found by try'n'error, be careful, maybe there are other options
 	 * for multiplicator etc!
 	 */
 	if (baud == 460800)
 		/* strange, for 460800 the formula is wrong
 		 * (dont use round(), then 9600baud is wrong) */
 		ark3116_baud = 7;
 	else
 		ark3116_baud = 3000000 / baud;

 	/* ? */
 	ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf);
 	/* offset = buf[0]; */
 	/* offset = 0x03; */
 	/* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */


 	/* set baudrate */
 	dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud);
 	ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
 	ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF)   ,0x0000);
 	ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001);
 	ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);

 	/* ? */
 	ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
 	ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);

 	/* set data bit count, stop bit count & parity: */
 	dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
 	ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
 	ARK3116_SND(serial,154,0xFE,0x40,config,0x0003);

 	if (cflag & CRTSCTS)
 		dbg("CRTSCTS not supported by chipset ?!");

 	/* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */

 	kfree(buf);
 	return;
 }

 static int ark3116_open(struct usb_serial_port *port, struct file *filp)
 {
 	struct termios tmp_termios;
 	struct usb_serial *serial = port->serial;
 	char *buf;
 	int result = 0;

 	dbg("%s -  port %d", __FUNCTION__, port->number);

 	buf = kmalloc(1, GFP_KERNEL);
 	if (!buf) {
 		dbg("error kmalloc -> out of mem ?");
 		return -ENOMEM;
 	}

 	result = usb_serial_generic_open(port, filp);
 	if (result)
 		return result;

 	/* open */
 	ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf);

 	ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003);
 	ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000);
 	ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001);
 	ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003);

 	ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf);
 	ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004);

 	ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf);
 	ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004);

 	ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf);

 	ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004);

 	ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf);

 	ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004);

 	/* returns different values (control lines ?!) */
 	ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);

 	/* initialise termios: */
 	if (port->tty)
 		ark3116_set_termios(port, &tmp_termios);

 	kfree(buf);

 	return result;

 }

 static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
 			 unsigned int cmd, unsigned long arg)
 {
 	struct serial_struct serstruct;
 	void __user *user_arg = (void __user *)arg;

 	switch (cmd) {
 	case TIOCGSERIAL:
 		/* XXX: Some of these values are probably wrong. */
 		memset(&serstruct, 0, sizeof (serstruct));
 		serstruct.type = PORT_16654;
 		serstruct.line = port->serial->minor;
 		serstruct.port = port->number;
 		serstruct.custom_divisor = 0;
 		serstruct.baud_base = 460800;

 		if (copy_to_user(user_arg, &serstruct, sizeof (serstruct)))
 			return -EFAULT;

 		return 0;
 	case TIOCSSERIAL:
 		if (copy_from_user(&serstruct, user_arg, sizeof (serstruct)))
 			return -EFAULT;
 		return 0;
 	default:
 		dbg("%s cmd 0x%04x not supported", __FUNCTION__, cmd);
 		break;
 	}

 	return -ENOIOCTLCMD;
 }

 static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
 {
 	struct usb_serial *serial = port->serial;
 	char *buf;
 	char temp;

 	/* seems like serial port status info (RTS, CTS,...) is stored
 	 * in reg(?) 0x0006
 	 * pcb connection point 11 = GND -> sets bit4 of response
 	 * pcb connection point  7 = GND -> sets bit6 of response
 	 */

 	buf = kmalloc(1, GFP_KERNEL);
 	if (!buf) {
 		dbg("error kmalloc");
 		return -ENOMEM;
 	}

 	/* read register: */
 	ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf);
 	temp = buf[0];
 	kfree(buf);

 	/* i do not really know if bit4=CTS and bit6=DSR... was just a
 	 * quick guess !!
 	 */
 	return  (temp & (1<<4) ? TIOCM_CTS : 0) |
 	        (temp & (1<<6) ? TIOCM_DSR : 0);
 }

 static struct usb_driver ark3116_driver = {
 	.name =		"ark3116",
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
 };

 static struct usb_serial_driver ark3116_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
 		.name =		"ark3116",
 	},
 	.id_table =		id_table,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		1,
 	.num_bulk_out =		1,
 	.num_ports =		1,
 	.attach =		ark3116_attach,
 	.set_termios =		ark3116_set_termios,
 	.ioctl =		ark3116_ioctl,
 	.tiocmget =		ark3116_tiocmget,
 	.open =			ark3116_open,
 };

 static int __init ark3116_init(void)
 {
 	int retval;

 	retval = usb_serial_register(&ark3116_device);
 	if (retval)
 		return retval;
 	retval = usb_register(&ark3116_driver);
 	if (retval)
 		usb_serial_deregister(&ark3116_device);
 	return retval;
 }

 static void __exit ark3116_exit(void)
 {
 	usb_deregister(&ark3116_driver);
 	usb_serial_deregister(&ark3116_device);
 }

 module_init(ark3116_init);
 module_exit(ark3116_exit);
 MODULE_LICENSE("GPL");

 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
	/*
	* Copyright (C) 2006
	* Simon Schulz (ark3116_driver <at> auctionant.de)
	*
	* ark3116
	* - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
	* productid=0x0232) (used in a datacable called KQ-U8A)
	*
	* - based on code by krisfx -> thanks !!
	* (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457)
	*
	* - based on logs created by usbsnoopy
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*/

	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/tty.h>
	#include <linux/module.h>
	#include <linux/usb.h>
	#include <linux/usb/serial.h>
	#include <linux/serial.h>
	#include <asm/uaccess.h>


	static int debug;

	static struct usb_device_id id_table [] = {
	{ USB_DEVICE(0x6547, 0x0232) },
	{ },
	};
	MODULE_DEVICE_TABLE(usb, id_table);

	struct ark3116_private {
	spinlock_t lock;
	u8 termios_initialized;
	};

	static inline void ARK3116_SND(struct usb_serial *serial, int seq,
	__u8 request, __u8 requesttype,
	__u16 value, __u16 index)
	{
	int result;
	result = usb_control_msg(serial->dev,
	usb_sndctrlpipe(serial->dev,0),
	request, requesttype, value, index,
	NULL,0x00, 1000);
	dbg("%03d > ok",seq);
	}

	static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
	__u8 request, __u8 requesttype,
	__u16 value, __u16 index, __u8 expected,
	char *buf)
	{
	int result;
	result = usb_control_msg(serial->dev,
	usb_rcvctrlpipe(serial->dev,0),
	request, requesttype, value, index,
	buf, 0x0000001, 1000);
	if (result)
	dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]);
	else
	dbg("%03d < 0 bytes", seq);
	}


	static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
	__u8 request, __u8 requesttype,
	__u16 value, __u16 index, char *buf)
	{
	usb_control_msg(serial->dev,
	usb_rcvctrlpipe(serial->dev,0),
	request, requesttype, value, index,
	buf, 0x0000001, 1000);
	}


	static int ark3116_attach(struct usb_serial *serial)
	{
	char *buf;
	struct ark3116_private *priv;
	int i;

	for (i = 0; i < serial->num_ports; ++i) {
	priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL);
	if (!priv)
	goto cleanup;
	memset (priv, 0x00, sizeof (struct ark3116_private));
	spin_lock_init(&priv->lock);

	usb_set_serial_port_data(serial->port[i], priv);
	}

	buf = kmalloc(1, GFP_KERNEL);
	if (!buf) {
	dbg("error kmalloc -> out of mem ?");
	goto cleanup;
	}

	/* 3 */
	ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002);
	ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001);
	ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008);
	ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B);

	/* <-- seq7 */
	ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf);
	ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003);
	ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000);
	ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001);
	ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003);

	/* <-- seq12 */
	ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
	ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004);

	/* 14 */
	ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
	ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004);

	/* 16 */
	ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
	/* --> seq17 */
	ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004);

	/* <-- seq18 */
	ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf);

	/* --> seq19 */
	ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004);


	/* <-- seq20 */
	/* seems like serial port status info (RTS, CTS,...) */
	/* returns modem control line status ?! */
	ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);

	/* set 9600 baud & do some init ?! */
	ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
	ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000);
	ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001);
	ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
	ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
	ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
	ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
	ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003);

	kfree(buf);
	return(0);

	cleanup:
	for (--i; i>=0; --i)
	usb_set_serial_port_data(serial->port[i], NULL);
	return -ENOMEM;
	}

	static void ark3116_set_termios(struct usb_serial_port *port,
	struct termios *old_termios)
	{
	struct usb_serial *serial = port->serial;
	struct ark3116_private *priv = usb_get_serial_port_data(port);
	unsigned int cflag = port->tty->termios->c_cflag;
	unsigned long flags;
	int baud;
	int ark3116_baud;
	char *buf;
	char config;

	config = 0;

	dbg("%s - port %d", __FUNCTION__, port->number);

	if ((!port->tty) \|\| (!port->tty->termios)) {
	dbg("%s - no tty structures", __FUNCTION__);
	return;
	}

	spin_lock_irqsave(&priv->lock, flags);
	if (!priv->termios_initialized) {
	*(port->tty->termios) = tty_std_termios;
	port->tty->termios->c_cflag = B9600 \| CS8 \| CREAD \| HUPCL \| CLOCAL;
	priv->termios_initialized = 1;
	}
	spin_unlock_irqrestore(&priv->lock, flags);

	cflag = port->tty->termios->c_cflag;

	/* check that they really want us to change something: */
	if (old_termios) {
	if ((cflag == old_termios->c_cflag) &&
	(RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
	RELEVANT_IFLAG(old_termios->c_iflag))) {
	dbg("%s - nothing to change...", __FUNCTION__);
	return;
	}
	}

	buf = kmalloc(1, GFP_KERNEL);
	if (!buf) {
	dbg("error kmalloc");
	return;
	}

	/* set data bit count (8/7/6/5) */
	if (cflag & CSIZE){
	switch (cflag & CSIZE){
	case CS5:
	config \|= 0x00;
	dbg("setting CS5");
	break;
	case CS6:
	config \|= 0x01;
	dbg("setting CS6");
	break;
	case CS7:
	config \|= 0x02;
	dbg("setting CS7");
	break;
	default:
	err ("CSIZE was set but not CS5-CS8, using CS8!");
	case CS8:
	config \|= 0x03;
	dbg("setting CS8");
	break;
	}
	}

	/* set parity (NONE,EVEN,ODD) */
	if (cflag & PARENB){
	if (cflag & PARODD) {
	config \|= 0x08;
	dbg("setting parity to ODD");
	} else {
	config \|= 0x18;
	dbg("setting parity to EVEN");
	}
	} else {
	dbg("setting parity to NONE");
	}

	/* SET STOPBIT (1/2) */
	if (cflag & CSTOPB) {
	config \|= 0x04;
	dbg ("setting 2 stop bits");
	} else {
	dbg ("setting 1 stop bit");
	}


	/* set baudrate: */
	baud = 0;
	switch (cflag & CBAUD){
	case B0:
	err("can't set 0baud, using 9600 instead");
	break;
	case B75: baud = 75; break;
	case B150: baud = 150; break;
	case B300: baud = 300; break;
	case B600: baud = 600; break;
	case B1200: baud = 1200; break;
	case B1800: baud = 1800; break;
	case B2400: baud = 2400; break;
	case B4800: baud = 4800; break;
	case B9600: baud = 9600; break;
	case B19200: baud = 19200; break;
	case B38400: baud = 38400; break;
	case B57600: baud = 57600; break;
	case B115200: baud = 115200; break;
	case B230400: baud = 230400; break;
	case B460800: baud = 460800; break;
	default:
	dbg("does not support the baudrate requested (fix it)");
	break;
	}

	/* set 9600 as default (if given baudrate is invalid for example) */
	if (baud == 0)
	baud = 9600;

	/*
	* found by try'n'error, be careful, maybe there are other options
	* for multiplicator etc!
	*/
	if (baud == 460800)
	/* strange, for 460800 the formula is wrong
	* (dont use round(), then 9600baud is wrong) */
	ark3116_baud = 7;
	else
	ark3116_baud = 3000000 / baud;

	/* ? */
	ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf);
	/* offset = buf[0]; */
	/* offset = 0x03; */
	/* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */


	/* set baudrate */
	dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud);
	ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
	ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF) ,0x0000);
	ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001);
	ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);

	/* ? */
	ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
	ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);

	/* set data bit count, stop bit count & parity: */
	dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
	ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
	ARK3116_SND(serial,154,0xFE,0x40,config,0x0003);

	if (cflag & CRTSCTS)
	dbg("CRTSCTS not supported by chipset ?!");

	/* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */

	kfree(buf);
	return;
	}

	static int ark3116_open(struct usb_serial_port port, struct file filp)
	{
	struct termios tmp_termios;
	struct usb_serial *serial = port->serial;
	char *buf;
	int result = 0;

	dbg("%s - port %d", __FUNCTION__, port->number);

	buf = kmalloc(1, GFP_KERNEL);
	if (!buf) {
	dbg("error kmalloc -> out of mem ?");
	return -ENOMEM;
	}

	result = usb_serial_generic_open(port, filp);
	if (result)
	return result;

	/* open */
	ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf);

	ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003);
	ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000);
	ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001);
	ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003);

	ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf);
	ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004);

	ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf);
	ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004);

	ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf);

	ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004);

	ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf);

	ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004);

	/* returns different values (control lines ?!) */
	ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);

	/* initialise termios: */
	if (port->tty)
	ark3116_set_termios(port, &tmp_termios);

	kfree(buf);

	return result;

	}

	static int ark3116_ioctl(struct usb_serial_port port, struct file file,
	unsigned int cmd, unsigned long arg)
	{
	struct serial_struct serstruct;
	void __user user_arg = (void __user )arg;

	switch (cmd) {
	case TIOCGSERIAL:
	/* XXX: Some of these values are probably wrong. */
	memset(&serstruct, 0, sizeof (serstruct));
	serstruct.type = PORT_16654;
	serstruct.line = port->serial->minor;
	serstruct.port = port->number;
	serstruct.custom_divisor = 0;
	serstruct.baud_base = 460800;

	if (copy_to_user(user_arg, &serstruct, sizeof (serstruct)))
	return -EFAULT;

	return 0;
	case TIOCSSERIAL:
	if (copy_from_user(&serstruct, user_arg, sizeof (serstruct)))
	return -EFAULT;
	return 0;
	default:
	dbg("%s cmd 0x%04x not supported", __FUNCTION__, cmd);
	break;
	}

	return -ENOIOCTLCMD;
	}

	static int ark3116_tiocmget(struct usb_serial_port port, struct file file)
	{
	struct usb_serial *serial = port->serial;
	char *buf;
	char temp;

	/* seems like serial port status info (RTS, CTS,...) is stored
	* in reg(?) 0x0006
	* pcb connection point 11 = GND -> sets bit4 of response
	* pcb connection point 7 = GND -> sets bit6 of response
	*/

	buf = kmalloc(1, GFP_KERNEL);
	if (!buf) {
	dbg("error kmalloc");
	return -ENOMEM;
	}

	/* read register: */
	ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf);
	temp = buf[0];
	kfree(buf);

	/* i do not really know if bit4=CTS and bit6=DSR... was just a
	* quick guess !!
	*/
	return (temp & (1<<4) ? TIOCM_CTS : 0) \|
	(temp & (1<<6) ? TIOCM_DSR : 0);
	}

	static struct usb_driver ark3116_driver = {
	.name = "ark3116",
	.probe = usb_serial_probe,
	.disconnect = usb_serial_disconnect,
	.id_table = id_table,
	};

	static struct usb_serial_driver ark3116_device = {
	.driver = {
	.owner = THIS_MODULE,
	.name = "ark3116",
	},
	.id_table = id_table,
	.num_interrupt_in = 1,
	.num_bulk_in = 1,
	.num_bulk_out = 1,
	.num_ports = 1,
	.attach = ark3116_attach,
	.set_termios = ark3116_set_termios,
	.ioctl = ark3116_ioctl,
	.tiocmget = ark3116_tiocmget,
	.open = ark3116_open,
	};

	static int __init ark3116_init(void)
	{
	int retval;

	retval = usb_serial_register(&ark3116_device);
	if (retval)
	return retval;
	retval = usb_register(&ark3116_driver);
	if (retval)
	usb_serial_deregister(&ark3116_device);
	return retval;
	}

	static void __exit ark3116_exit(void)
	{
	usb_deregister(&ark3116_driver);
	usb_serial_deregister(&ark3116_device);
	}

	module_init(ark3116_init);
	module_exit(ark3116_exit);
	MODULE_LICENSE("GPL");

	module_param(debug, bool, S_IRUGO \| S_IWUSR);
	MODULE_PARM_DESC(debug, "Debug enabled or not");