| /* |
| drbd_worker.c |
| |
| This file is part of DRBD by Philipp Reisner and Lars Ellenberg. |
| |
| Copyright (C) 2001-2008, LINBIT Information Technologies GmbH. |
| Copyright (C) 1999-2008, Philipp Reisner <philipp.reisner@linbit.com>. |
| Copyright (C) 2002-2008, Lars Ellenberg <lars.ellenberg@linbit.com>. |
| |
| drbd is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2, or (at your option) |
| any later version. |
| |
| drbd is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with drbd; see the file COPYING. If not, write to |
| the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/version.h> |
| #include <linux/drbd.h> |
| #include <linux/sched.h> |
| #include <linux/smp_lock.h> |
| #include <linux/wait.h> |
| #include <linux/mm.h> |
| #include <linux/memcontrol.h> |
| #include <linux/mm_inline.h> |
| #include <linux/slab.h> |
| #include <linux/random.h> |
| #include <linux/mm.h> |
| #include <linux/string.h> |
| #include <linux/scatterlist.h> |
| |
| #include "drbd_int.h" |
| #include "drbd_req.h" |
| |
| #define SLEEP_TIME (HZ/10) |
| |
| static int w_make_ov_request(struct drbd_conf *mdev, struct drbd_work *w, int cancel); |
| |
| |
| |
| /* defined here: |
| drbd_md_io_complete |
| drbd_endio_write_sec |
| drbd_endio_read_sec |
| drbd_endio_pri |
| |
| * more endio handlers: |
| atodb_endio in drbd_actlog.c |
| drbd_bm_async_io_complete in drbd_bitmap.c |
| |
| * For all these callbacks, note the following: |
| * The callbacks will be called in irq context by the IDE drivers, |
| * and in Softirqs/Tasklets/BH context by the SCSI drivers. |
| * Try to get the locking right :) |
| * |
| */ |
| |
| |
| /* About the global_state_lock |
| Each state transition on an device holds a read lock. In case we have |
| to evaluate the sync after dependencies, we grab a write lock, because |
| we need stable states on all devices for that. */ |
| rwlock_t global_state_lock; |
| |
| /* used for synchronous meta data and bitmap IO |
| * submitted by drbd_md_sync_page_io() |
| */ |
| void drbd_md_io_complete(struct bio *bio, int error) |
| { |
| struct drbd_md_io *md_io; |
| |
| md_io = (struct drbd_md_io *)bio->bi_private; |
| md_io->error = error; |
| |
| complete(&md_io->event); |
| } |
| |
| /* reads on behalf of the partner, |
| * "submitted" by the receiver |
| */ |
| void drbd_endio_read_sec(struct bio *bio, int error) __releases(local) |
| { |
| unsigned long flags = 0; |
| struct drbd_epoch_entry *e = NULL; |
| struct drbd_conf *mdev; |
| int uptodate = bio_flagged(bio, BIO_UPTODATE); |
| |
| e = bio->bi_private; |
| mdev = e->mdev; |
| |
| if (error) |
| dev_warn(DEV, "read: error=%d s=%llus\n", error, |
| (unsigned long long)e->sector); |
| if (!error && !uptodate) { |
| dev_warn(DEV, "read: setting error to -EIO s=%llus\n", |
| (unsigned long long)e->sector); |
| /* strange behavior of some lower level drivers... |
| * fail the request by clearing the uptodate flag, |
| * but do not return any error?! */ |
| error = -EIO; |
| } |
| |
| D_ASSERT(e->block_id != ID_VACANT); |
| |
| spin_lock_irqsave(&mdev->req_lock, flags); |
| mdev->read_cnt += e->size >> 9; |
| list_del(&e->w.list); |
| if (list_empty(&mdev->read_ee)) |
| wake_up(&mdev->ee_wait); |
| spin_unlock_irqrestore(&mdev->req_lock, flags); |
| |
| drbd_chk_io_error(mdev, error, FALSE); |
| drbd_queue_work(&mdev->data.work, &e->w); |
| put_ldev(mdev); |
| } |
| |
| /* writes on behalf of the partner, or resync writes, |
| * "submitted" by the receiver. |
| */ |
| void drbd_endio_write_sec(struct bio *bio, int error) __releases(local) |
| { |
| unsigned long flags = 0; |
| struct drbd_epoch_entry *e = NULL; |
| struct drbd_conf *mdev; |
| sector_t e_sector; |
| int do_wake; |
| int is_syncer_req; |
| int do_al_complete_io; |
| int uptodate = bio_flagged(bio, BIO_UPTODATE); |
| int is_barrier = bio_rw_flagged(bio, BIO_RW_BARRIER); |
| |
| e = bio->bi_private; |
| mdev = e->mdev; |
| |
| if (error) |
| dev_warn(DEV, "write: error=%d s=%llus\n", error, |
| (unsigned long long)e->sector); |
| if (!error && !uptodate) { |
| dev_warn(DEV, "write: setting error to -EIO s=%llus\n", |
| (unsigned long long)e->sector); |
| /* strange behavior of some lower level drivers... |
| * fail the request by clearing the uptodate flag, |
| * but do not return any error?! */ |
| error = -EIO; |
| } |
| |
| /* error == -ENOTSUPP would be a better test, |
| * alas it is not reliable */ |
| if (error && is_barrier && e->flags & EE_IS_BARRIER) { |
| drbd_bump_write_ordering(mdev, WO_bdev_flush); |
| spin_lock_irqsave(&mdev->req_lock, flags); |
| list_del(&e->w.list); |
| e->w.cb = w_e_reissue; |
| /* put_ldev actually happens below, once we come here again. */ |
| __release(local); |
| spin_unlock_irqrestore(&mdev->req_lock, flags); |
| drbd_queue_work(&mdev->data.work, &e->w); |
| return; |
| } |
| |
| D_ASSERT(e->block_id != ID_VACANT); |
| |
| spin_lock_irqsave(&mdev->req_lock, flags); |
| mdev->writ_cnt += e->size >> 9; |
| is_syncer_req = is_syncer_block_id(e->block_id); |
| |
| /* after we moved e to done_ee, |
| * we may no longer access it, |
| * it may be freed/reused already! |
| * (as soon as we release the req_lock) */ |
| e_sector = e->sector; |
| do_al_complete_io = e->flags & EE_CALL_AL_COMPLETE_IO; |
| |
| list_del(&e->w.list); /* has been on active_ee or sync_ee */ |
| list_add_tail(&e->w.list, &mdev->done_ee); |
| |
| /* No hlist_del_init(&e->colision) here, we did not send the Ack yet, |
| * neither did we wake possibly waiting conflicting requests. |
| * done from "drbd_process_done_ee" within the appropriate w.cb |
| * (e_end_block/e_end_resync_block) or from _drbd_clear_done_ee */ |
| |
| do_wake = is_syncer_req |
| ? list_empty(&mdev->sync_ee) |
| : list_empty(&mdev->active_ee); |
| |
| if (error) |
| __drbd_chk_io_error(mdev, FALSE); |
| spin_unlock_irqrestore(&mdev->req_lock, flags); |
| |
| if (is_syncer_req) |
| drbd_rs_complete_io(mdev, e_sector); |
| |
| if (do_wake) |
| wake_up(&mdev->ee_wait); |
| |
| if (do_al_complete_io) |
| drbd_al_complete_io(mdev, e_sector); |
| |
| wake_asender(mdev); |
| put_ldev(mdev); |
| |
| } |
| |
| /* read, readA or write requests on R_PRIMARY coming from drbd_make_request |
| */ |
| void drbd_endio_pri(struct bio *bio, int error) |
| { |
| unsigned long flags; |
| struct drbd_request *req = bio->bi_private; |
| struct drbd_conf *mdev = req->mdev; |
| struct bio_and_error m; |
| enum drbd_req_event what; |
| int uptodate = bio_flagged(bio, BIO_UPTODATE); |
| |
| if (error) |
| dev_warn(DEV, "p %s: error=%d\n", |
| bio_data_dir(bio) == WRITE ? "write" : "read", error); |
| if (!error && !uptodate) { |
| dev_warn(DEV, "p %s: setting error to -EIO\n", |
| bio_data_dir(bio) == WRITE ? "write" : "read"); |
| /* strange behavior of some lower level drivers... |
| * fail the request by clearing the uptodate flag, |
| * but do not return any error?! */ |
| error = -EIO; |
| } |
| |
| /* to avoid recursion in __req_mod */ |
| if (unlikely(error)) { |
| what = (bio_data_dir(bio) == WRITE) |
| ? write_completed_with_error |
| : (bio_rw(bio) == READA) |
| ? read_completed_with_error |
| : read_ahead_completed_with_error; |
| } else |
| what = completed_ok; |
| |
| bio_put(req->private_bio); |
| req->private_bio = ERR_PTR(error); |
| |
| spin_lock_irqsave(&mdev->req_lock, flags); |
| __req_mod(req, what, &m); |
| spin_unlock_irqrestore(&mdev->req_lock, flags); |
| |
| if (m.bio) |
| complete_master_bio(mdev, &m); |
| } |
| |
| int w_io_error(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| struct drbd_request *req = container_of(w, struct drbd_request, w); |
| |
| /* NOTE: mdev->ldev can be NULL by the time we get here! */ |
| /* D_ASSERT(mdev->ldev->dc.on_io_error != EP_PASS_ON); */ |
| |
| /* the only way this callback is scheduled is from _req_may_be_done, |
| * when it is done and had a local write error, see comments there */ |
| drbd_req_free(req); |
| |
| return TRUE; |
| } |
| |
| int w_read_retry_remote(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| struct drbd_request *req = container_of(w, struct drbd_request, w); |
| |
| /* We should not detach for read io-error, |
| * but try to WRITE the P_DATA_REPLY to the failed location, |
| * to give the disk the chance to relocate that block */ |
| |
| spin_lock_irq(&mdev->req_lock); |
| if (cancel || |
| mdev->state.conn < C_CONNECTED || |
| mdev->state.pdsk <= D_INCONSISTENT) { |
| _req_mod(req, send_canceled); |
| spin_unlock_irq(&mdev->req_lock); |
| dev_alert(DEV, "WE ARE LOST. Local IO failure, no peer.\n"); |
| return 1; |
| } |
| spin_unlock_irq(&mdev->req_lock); |
| |
| return w_send_read_req(mdev, w, 0); |
| } |
| |
| int w_resync_inactive(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| ERR_IF(cancel) return 1; |
| dev_err(DEV, "resync inactive, but callback triggered??\n"); |
| return 1; /* Simply ignore this! */ |
| } |
| |
| void drbd_csum(struct drbd_conf *mdev, struct crypto_hash *tfm, struct bio *bio, void *digest) |
| { |
| struct hash_desc desc; |
| struct scatterlist sg; |
| struct bio_vec *bvec; |
| int i; |
| |
| desc.tfm = tfm; |
| desc.flags = 0; |
| |
| sg_init_table(&sg, 1); |
| crypto_hash_init(&desc); |
| |
| __bio_for_each_segment(bvec, bio, i, 0) { |
| sg_set_page(&sg, bvec->bv_page, bvec->bv_len, bvec->bv_offset); |
| crypto_hash_update(&desc, &sg, sg.length); |
| } |
| crypto_hash_final(&desc, digest); |
| } |
| |
| static int w_e_send_csum(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| struct drbd_epoch_entry *e = container_of(w, struct drbd_epoch_entry, w); |
| int digest_size; |
| void *digest; |
| int ok; |
| |
| D_ASSERT(e->block_id == DRBD_MAGIC + 0xbeef); |
| |
| if (unlikely(cancel)) { |
| drbd_free_ee(mdev, e); |
| return 1; |
| } |
| |
| if (likely(drbd_bio_uptodate(e->private_bio))) { |
| digest_size = crypto_hash_digestsize(mdev->csums_tfm); |
| digest = kmalloc(digest_size, GFP_NOIO); |
| if (digest) { |
| drbd_csum(mdev, mdev->csums_tfm, e->private_bio, digest); |
| |
| inc_rs_pending(mdev); |
| ok = drbd_send_drequest_csum(mdev, |
| e->sector, |
| e->size, |
| digest, |
| digest_size, |
| P_CSUM_RS_REQUEST); |
| kfree(digest); |
| } else { |
| dev_err(DEV, "kmalloc() of digest failed.\n"); |
| ok = 0; |
| } |
| } else |
| ok = 1; |
| |
| drbd_free_ee(mdev, e); |
| |
| if (unlikely(!ok)) |
| dev_err(DEV, "drbd_send_drequest(..., csum) failed\n"); |
| return ok; |
| } |
| |
| #define GFP_TRY (__GFP_HIGHMEM | __GFP_NOWARN) |
| |
| static int read_for_csum(struct drbd_conf *mdev, sector_t sector, int size) |
| { |
| struct drbd_epoch_entry *e; |
| |
| if (!get_ldev(mdev)) |
| return 0; |
| |
| /* GFP_TRY, because if there is no memory available right now, this may |
| * be rescheduled for later. It is "only" background resync, after all. */ |
| e = drbd_alloc_ee(mdev, DRBD_MAGIC+0xbeef, sector, size, GFP_TRY); |
| if (!e) { |
| put_ldev(mdev); |
| return 2; |
| } |
| |
| spin_lock_irq(&mdev->req_lock); |
| list_add(&e->w.list, &mdev->read_ee); |
| spin_unlock_irq(&mdev->req_lock); |
| |
| e->private_bio->bi_end_io = drbd_endio_read_sec; |
| e->private_bio->bi_rw = READ; |
| e->w.cb = w_e_send_csum; |
| |
| mdev->read_cnt += size >> 9; |
| drbd_generic_make_request(mdev, DRBD_FAULT_RS_RD, e->private_bio); |
| |
| return 1; |
| } |
| |
| void resync_timer_fn(unsigned long data) |
| { |
| unsigned long flags; |
| struct drbd_conf *mdev = (struct drbd_conf *) data; |
| int queue; |
| |
| spin_lock_irqsave(&mdev->req_lock, flags); |
| |
| if (likely(!test_and_clear_bit(STOP_SYNC_TIMER, &mdev->flags))) { |
| queue = 1; |
| if (mdev->state.conn == C_VERIFY_S) |
| mdev->resync_work.cb = w_make_ov_request; |
| else |
| mdev->resync_work.cb = w_make_resync_request; |
| } else { |
| queue = 0; |
| mdev->resync_work.cb = w_resync_inactive; |
| } |
| |
| spin_unlock_irqrestore(&mdev->req_lock, flags); |
| |
| /* harmless race: list_empty outside data.work.q_lock */ |
| if (list_empty(&mdev->resync_work.list) && queue) |
| drbd_queue_work(&mdev->data.work, &mdev->resync_work); |
| } |
| |
| int w_make_resync_request(struct drbd_conf *mdev, |
| struct drbd_work *w, int cancel) |
| { |
| unsigned long bit; |
| sector_t sector; |
| const sector_t capacity = drbd_get_capacity(mdev->this_bdev); |
| int max_segment_size = queue_max_segment_size(mdev->rq_queue); |
| int number, i, size, pe, mx; |
| int align, queued, sndbuf; |
| |
| if (unlikely(cancel)) |
| return 1; |
| |
| if (unlikely(mdev->state.conn < C_CONNECTED)) { |
| dev_err(DEV, "Confused in w_make_resync_request()! cstate < Connected"); |
| return 0; |
| } |
| |
| if (mdev->state.conn != C_SYNC_TARGET) |
| dev_err(DEV, "%s in w_make_resync_request\n", |
| drbd_conn_str(mdev->state.conn)); |
| |
| if (!get_ldev(mdev)) { |
| /* Since we only need to access mdev->rsync a |
| get_ldev_if_state(mdev,D_FAILED) would be sufficient, but |
| to continue resync with a broken disk makes no sense at |
| all */ |
| dev_err(DEV, "Disk broke down during resync!\n"); |
| mdev->resync_work.cb = w_resync_inactive; |
| return 1; |
| } |
| |
| number = SLEEP_TIME * mdev->sync_conf.rate / ((BM_BLOCK_SIZE/1024)*HZ); |
| pe = atomic_read(&mdev->rs_pending_cnt); |
| |
| mutex_lock(&mdev->data.mutex); |
| if (mdev->data.socket) |
| mx = mdev->data.socket->sk->sk_rcvbuf / sizeof(struct p_block_req); |
| else |
| mx = 1; |
| mutex_unlock(&mdev->data.mutex); |
| |
| /* For resync rates >160MB/sec, allow more pending RS requests */ |
| if (number > mx) |
| mx = number; |
| |
| /* Limit the number of pending RS requests to no more than the peer's receive buffer */ |
| if ((pe + number) > mx) { |
| number = mx - pe; |
| } |
| |
| for (i = 0; i < number; i++) { |
| /* Stop generating RS requests, when half of the send buffer is filled */ |
| mutex_lock(&mdev->data.mutex); |
| if (mdev->data.socket) { |
| queued = mdev->data.socket->sk->sk_wmem_queued; |
| sndbuf = mdev->data.socket->sk->sk_sndbuf; |
| } else { |
| queued = 1; |
| sndbuf = 0; |
| } |
| mutex_unlock(&mdev->data.mutex); |
| if (queued > sndbuf / 2) |
| goto requeue; |
| |
| next_sector: |
| size = BM_BLOCK_SIZE; |
| bit = drbd_bm_find_next(mdev, mdev->bm_resync_fo); |
| |
| if (bit == -1UL) { |
| mdev->bm_resync_fo = drbd_bm_bits(mdev); |
| mdev->resync_work.cb = w_resync_inactive; |
| put_ldev(mdev); |
| return 1; |
| } |
| |
| sector = BM_BIT_TO_SECT(bit); |
| |
| if (drbd_try_rs_begin_io(mdev, sector)) { |
| mdev->bm_resync_fo = bit; |
| goto requeue; |
| } |
| mdev->bm_resync_fo = bit + 1; |
| |
| if (unlikely(drbd_bm_test_bit(mdev, bit) == 0)) { |
| drbd_rs_complete_io(mdev, sector); |
| goto next_sector; |
| } |
| |
| #if DRBD_MAX_SEGMENT_SIZE > BM_BLOCK_SIZE |
| /* try to find some adjacent bits. |
| * we stop if we have already the maximum req size. |
| * |
| * Additionally always align bigger requests, in order to |
| * be prepared for all stripe sizes of software RAIDs. |
| * |
| * we _do_ care about the agreed-upon q->max_segment_size |
| * here, as splitting up the requests on the other side is more |
| * difficult. the consequence is, that on lvm and md and other |
| * "indirect" devices, this is dead code, since |
| * q->max_segment_size will be PAGE_SIZE. |
| */ |
| align = 1; |
| for (;;) { |
| if (size + BM_BLOCK_SIZE > max_segment_size) |
| break; |
| |
| /* Be always aligned */ |
| if (sector & ((1<<(align+3))-1)) |
| break; |
| |
| /* do not cross extent boundaries */ |
| if (((bit+1) & BM_BLOCKS_PER_BM_EXT_MASK) == 0) |
| break; |
| /* now, is it actually dirty, after all? |
| * caution, drbd_bm_test_bit is tri-state for some |
| * obscure reason; ( b == 0 ) would get the out-of-band |
| * only accidentally right because of the "oddly sized" |
| * adjustment below */ |
| if (drbd_bm_test_bit(mdev, bit+1) != 1) |
| break; |
| bit++; |
| size += BM_BLOCK_SIZE; |
| if ((BM_BLOCK_SIZE << align) <= size) |
| align++; |
| i++; |
| } |
| /* if we merged some, |
| * reset the offset to start the next drbd_bm_find_next from */ |
| if (size > BM_BLOCK_SIZE) |
| mdev->bm_resync_fo = bit + 1; |
| #endif |
| |
| /* adjust very last sectors, in case we are oddly sized */ |
| if (sector + (size>>9) > capacity) |
| size = (capacity-sector)<<9; |
| if (mdev->agreed_pro_version >= 89 && mdev->csums_tfm) { |
| switch (read_for_csum(mdev, sector, size)) { |
| case 0: /* Disk failure*/ |
| put_ldev(mdev); |
| return 0; |
| case 2: /* Allocation failed */ |
| drbd_rs_complete_io(mdev, sector); |
| mdev->bm_resync_fo = BM_SECT_TO_BIT(sector); |
| goto requeue; |
| /* case 1: everything ok */ |
| } |
| } else { |
| inc_rs_pending(mdev); |
| if (!drbd_send_drequest(mdev, P_RS_DATA_REQUEST, |
| sector, size, ID_SYNCER)) { |
| dev_err(DEV, "drbd_send_drequest() failed, aborting...\n"); |
| dec_rs_pending(mdev); |
| put_ldev(mdev); |
| return 0; |
| } |
| } |
| } |
| |
| if (mdev->bm_resync_fo >= drbd_bm_bits(mdev)) { |
| /* last syncer _request_ was sent, |
| * but the P_RS_DATA_REPLY not yet received. sync will end (and |
| * next sync group will resume), as soon as we receive the last |
| * resync data block, and the last bit is cleared. |
| * until then resync "work" is "inactive" ... |
| */ |
| mdev->resync_work.cb = w_resync_inactive; |
| put_ldev(mdev); |
| return 1; |
| } |
| |
| requeue: |
| mod_timer(&mdev->resync_timer, jiffies + SLEEP_TIME); |
| put_ldev(mdev); |
| return 1; |
| } |
| |
| static int w_make_ov_request(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| int number, i, size; |
| sector_t sector; |
| const sector_t capacity = drbd_get_capacity(mdev->this_bdev); |
| |
| if (unlikely(cancel)) |
| return 1; |
| |
| if (unlikely(mdev->state.conn < C_CONNECTED)) { |
| dev_err(DEV, "Confused in w_make_ov_request()! cstate < Connected"); |
| return 0; |
| } |
| |
| number = SLEEP_TIME*mdev->sync_conf.rate / ((BM_BLOCK_SIZE/1024)*HZ); |
| if (atomic_read(&mdev->rs_pending_cnt) > number) |
| goto requeue; |
| |
| number -= atomic_read(&mdev->rs_pending_cnt); |
| |
| sector = mdev->ov_position; |
| for (i = 0; i < number; i++) { |
| if (sector >= capacity) { |
| mdev->resync_work.cb = w_resync_inactive; |
| return 1; |
| } |
| |
| size = BM_BLOCK_SIZE; |
| |
| if (drbd_try_rs_begin_io(mdev, sector)) { |
| mdev->ov_position = sector; |
| goto requeue; |
| } |
| |
| if (sector + (size>>9) > capacity) |
| size = (capacity-sector)<<9; |
| |
| inc_rs_pending(mdev); |
| if (!drbd_send_ov_request(mdev, sector, size)) { |
| dec_rs_pending(mdev); |
| return 0; |
| } |
| sector += BM_SECT_PER_BIT; |
| } |
| mdev->ov_position = sector; |
| |
| requeue: |
| mod_timer(&mdev->resync_timer, jiffies + SLEEP_TIME); |
| return 1; |
| } |
| |
| |
| int w_ov_finished(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| kfree(w); |
| ov_oos_print(mdev); |
| drbd_resync_finished(mdev); |
| |
| return 1; |
| } |
| |
| static int w_resync_finished(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| kfree(w); |
| |
| drbd_resync_finished(mdev); |
| |
| return 1; |
| } |
| |
| int drbd_resync_finished(struct drbd_conf *mdev) |
| { |
| unsigned long db, dt, dbdt; |
| unsigned long n_oos; |
| union drbd_state os, ns; |
| struct drbd_work *w; |
| char *khelper_cmd = NULL; |
| |
| /* Remove all elements from the resync LRU. Since future actions |
| * might set bits in the (main) bitmap, then the entries in the |
| * resync LRU would be wrong. */ |
| if (drbd_rs_del_all(mdev)) { |
| /* In case this is not possible now, most probably because |
| * there are P_RS_DATA_REPLY Packets lingering on the worker's |
| * queue (or even the read operations for those packets |
| * is not finished by now). Retry in 100ms. */ |
| |
| drbd_kick_lo(mdev); |
| __set_current_state(TASK_INTERRUPTIBLE); |
| schedule_timeout(HZ / 10); |
| w = kmalloc(sizeof(struct drbd_work), GFP_ATOMIC); |
| if (w) { |
| w->cb = w_resync_finished; |
| drbd_queue_work(&mdev->data.work, w); |
| return 1; |
| } |
| dev_err(DEV, "Warn failed to drbd_rs_del_all() and to kmalloc(w).\n"); |
| } |
| |
| dt = (jiffies - mdev->rs_start - mdev->rs_paused) / HZ; |
| if (dt <= 0) |
| dt = 1; |
| db = mdev->rs_total; |
| dbdt = Bit2KB(db/dt); |
| mdev->rs_paused /= HZ; |
| |
| if (!get_ldev(mdev)) |
| goto out; |
| |
| spin_lock_irq(&mdev->req_lock); |
| os = mdev->state; |
| |
| /* This protects us against multiple calls (that can happen in the presence |
| of application IO), and against connectivity loss just before we arrive here. */ |
| if (os.conn <= C_CONNECTED) |
| goto out_unlock; |
| |
| ns = os; |
| ns.conn = C_CONNECTED; |
| |
| dev_info(DEV, "%s done (total %lu sec; paused %lu sec; %lu K/sec)\n", |
| (os.conn == C_VERIFY_S || os.conn == C_VERIFY_T) ? |
| "Online verify " : "Resync", |
| dt + mdev->rs_paused, mdev->rs_paused, dbdt); |
| |
| n_oos = drbd_bm_total_weight(mdev); |
| |
| if (os.conn == C_VERIFY_S || os.conn == C_VERIFY_T) { |
| if (n_oos) { |
| dev_alert(DEV, "Online verify found %lu %dk block out of sync!\n", |
| n_oos, Bit2KB(1)); |
| khelper_cmd = "out-of-sync"; |
| } |
| } else { |
| D_ASSERT((n_oos - mdev->rs_failed) == 0); |
| |
| if (os.conn == C_SYNC_TARGET || os.conn == C_PAUSED_SYNC_T) |
| khelper_cmd = "after-resync-target"; |
| |
| if (mdev->csums_tfm && mdev->rs_total) { |
| const unsigned long s = mdev->rs_same_csum; |
| const unsigned long t = mdev->rs_total; |
| const int ratio = |
| (t == 0) ? 0 : |
| (t < 100000) ? ((s*100)/t) : (s/(t/100)); |
| dev_info(DEV, "%u %% had equal check sums, eliminated: %luK; " |
| "transferred %luK total %luK\n", |
| ratio, |
| Bit2KB(mdev->rs_same_csum), |
| Bit2KB(mdev->rs_total - mdev->rs_same_csum), |
| Bit2KB(mdev->rs_total)); |
| } |
| } |
| |
| if (mdev->rs_failed) { |
| dev_info(DEV, " %lu failed blocks\n", mdev->rs_failed); |
| |
| if (os.conn == C_SYNC_TARGET || os.conn == C_PAUSED_SYNC_T) { |
| ns.disk = D_INCONSISTENT; |
| ns.pdsk = D_UP_TO_DATE; |
| } else { |
| ns.disk = D_UP_TO_DATE; |
| ns.pdsk = D_INCONSISTENT; |
| } |
| } else { |
| ns.disk = D_UP_TO_DATE; |
| ns.pdsk = D_UP_TO_DATE; |
| |
| if (os.conn == C_SYNC_TARGET || os.conn == C_PAUSED_SYNC_T) { |
| if (mdev->p_uuid) { |
| int i; |
| for (i = UI_BITMAP ; i <= UI_HISTORY_END ; i++) |
| _drbd_uuid_set(mdev, i, mdev->p_uuid[i]); |
| drbd_uuid_set(mdev, UI_BITMAP, mdev->ldev->md.uuid[UI_CURRENT]); |
| _drbd_uuid_set(mdev, UI_CURRENT, mdev->p_uuid[UI_CURRENT]); |
| } else { |
| dev_err(DEV, "mdev->p_uuid is NULL! BUG\n"); |
| } |
| } |
| |
| drbd_uuid_set_bm(mdev, 0UL); |
| |
| if (mdev->p_uuid) { |
| /* Now the two UUID sets are equal, update what we |
| * know of the peer. */ |
| int i; |
| for (i = UI_CURRENT ; i <= UI_HISTORY_END ; i++) |
| mdev->p_uuid[i] = mdev->ldev->md.uuid[i]; |
| } |
| } |
| |
| _drbd_set_state(mdev, ns, CS_VERBOSE, NULL); |
| out_unlock: |
| spin_unlock_irq(&mdev->req_lock); |
| put_ldev(mdev); |
| out: |
| mdev->rs_total = 0; |
| mdev->rs_failed = 0; |
| mdev->rs_paused = 0; |
| mdev->ov_start_sector = 0; |
| |
| if (test_and_clear_bit(WRITE_BM_AFTER_RESYNC, &mdev->flags)) { |
| dev_warn(DEV, "Writing the whole bitmap, due to failed kmalloc\n"); |
| drbd_queue_bitmap_io(mdev, &drbd_bm_write, NULL, "write from resync_finished"); |
| } |
| |
| if (khelper_cmd) |
| drbd_khelper(mdev, khelper_cmd); |
| |
| return 1; |
| } |
| |
| /* helper */ |
| static void move_to_net_ee_or_free(struct drbd_conf *mdev, struct drbd_epoch_entry *e) |
| { |
| if (drbd_bio_has_active_page(e->private_bio)) { |
| /* This might happen if sendpage() has not finished */ |
| spin_lock_irq(&mdev->req_lock); |
| list_add_tail(&e->w.list, &mdev->net_ee); |
| spin_unlock_irq(&mdev->req_lock); |
| } else |
| drbd_free_ee(mdev, e); |
| } |
| |
| /** |
| * w_e_end_data_req() - Worker callback, to send a P_DATA_REPLY packet in response to a P_DATA_REQUEST |
| * @mdev: DRBD device. |
| * @w: work object. |
| * @cancel: The connection will be closed anyways |
| */ |
| int w_e_end_data_req(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| struct drbd_epoch_entry *e = container_of(w, struct drbd_epoch_entry, w); |
| int ok; |
| |
| if (unlikely(cancel)) { |
| drbd_free_ee(mdev, e); |
| dec_unacked(mdev); |
| return 1; |
| } |
| |
| if (likely(drbd_bio_uptodate(e->private_bio))) { |
| ok = drbd_send_block(mdev, P_DATA_REPLY, e); |
| } else { |
| if (__ratelimit(&drbd_ratelimit_state)) |
| dev_err(DEV, "Sending NegDReply. sector=%llus.\n", |
| (unsigned long long)e->sector); |
| |
| ok = drbd_send_ack(mdev, P_NEG_DREPLY, e); |
| } |
| |
| dec_unacked(mdev); |
| |
| move_to_net_ee_or_free(mdev, e); |
| |
| if (unlikely(!ok)) |
| dev_err(DEV, "drbd_send_block() failed\n"); |
| return ok; |
| } |
| |
| /** |
| * w_e_end_rsdata_req() - Worker callback to send a P_RS_DATA_REPLY packet in response to a P_RS_DATA_REQUESTRS |
| * @mdev: DRBD device. |
| * @w: work object. |
| * @cancel: The connection will be closed anyways |
| */ |
| int w_e_end_rsdata_req(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| struct drbd_epoch_entry *e = container_of(w, struct drbd_epoch_entry, w); |
| int ok; |
| |
| if (unlikely(cancel)) { |
| drbd_free_ee(mdev, e); |
| dec_unacked(mdev); |
| return 1; |
| } |
| |
| if (get_ldev_if_state(mdev, D_FAILED)) { |
| drbd_rs_complete_io(mdev, e->sector); |
| put_ldev(mdev); |
| } |
| |
| if (likely(drbd_bio_uptodate(e->private_bio))) { |
| if (likely(mdev->state.pdsk >= D_INCONSISTENT)) { |
| inc_rs_pending(mdev); |
| ok = drbd_send_block(mdev, P_RS_DATA_REPLY, e); |
| } else { |
| if (__ratelimit(&drbd_ratelimit_state)) |
| dev_err(DEV, "Not sending RSDataReply, " |
| "partner DISKLESS!\n"); |
| ok = 1; |
| } |
| } else { |
| if (__ratelimit(&drbd_ratelimit_state)) |
| dev_err(DEV, "Sending NegRSDReply. sector %llus.\n", |
| (unsigned long long)e->sector); |
| |
| ok = drbd_send_ack(mdev, P_NEG_RS_DREPLY, e); |
| |
| /* update resync data with failure */ |
| drbd_rs_failed_io(mdev, e->sector, e->size); |
| } |
| |
| dec_unacked(mdev); |
| |
| move_to_net_ee_or_free(mdev, e); |
| |
| if (unlikely(!ok)) |
| dev_err(DEV, "drbd_send_block() failed\n"); |
| return ok; |
| } |
| |
| int w_e_end_csum_rs_req(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| struct drbd_epoch_entry *e = container_of(w, struct drbd_epoch_entry, w); |
| struct digest_info *di; |
| int digest_size; |
| void *digest = NULL; |
| int ok, eq = 0; |
| |
| if (unlikely(cancel)) { |
| drbd_free_ee(mdev, e); |
| dec_unacked(mdev); |
| return 1; |
| } |
| |
| drbd_rs_complete_io(mdev, e->sector); |
| |
| di = (struct digest_info *)(unsigned long)e->block_id; |
| |
| if (likely(drbd_bio_uptodate(e->private_bio))) { |
| /* quick hack to try to avoid a race against reconfiguration. |
| * a real fix would be much more involved, |
| * introducing more locking mechanisms */ |
| if (mdev->csums_tfm) { |
| digest_size = crypto_hash_digestsize(mdev->csums_tfm); |
| D_ASSERT(digest_size == di->digest_size); |
| digest = kmalloc(digest_size, GFP_NOIO); |
| } |
| if (digest) { |
| drbd_csum(mdev, mdev->csums_tfm, e->private_bio, digest); |
| eq = !memcmp(digest, di->digest, digest_size); |
| kfree(digest); |
| } |
| |
| if (eq) { |
| drbd_set_in_sync(mdev, e->sector, e->size); |
| mdev->rs_same_csum++; |
| ok = drbd_send_ack(mdev, P_RS_IS_IN_SYNC, e); |
| } else { |
| inc_rs_pending(mdev); |
| e->block_id = ID_SYNCER; |
| ok = drbd_send_block(mdev, P_RS_DATA_REPLY, e); |
| } |
| } else { |
| ok = drbd_send_ack(mdev, P_NEG_RS_DREPLY, e); |
| if (__ratelimit(&drbd_ratelimit_state)) |
| dev_err(DEV, "Sending NegDReply. I guess it gets messy.\n"); |
| } |
| |
| dec_unacked(mdev); |
| |
| kfree(di); |
| |
| move_to_net_ee_or_free(mdev, e); |
| |
| if (unlikely(!ok)) |
| dev_err(DEV, "drbd_send_block/ack() failed\n"); |
| return ok; |
| } |
| |
| int w_e_end_ov_req(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| struct drbd_epoch_entry *e = container_of(w, struct drbd_epoch_entry, w); |
| int digest_size; |
| void *digest; |
| int ok = 1; |
| |
| if (unlikely(cancel)) |
| goto out; |
| |
| if (unlikely(!drbd_bio_uptodate(e->private_bio))) |
| goto out; |
| |
| digest_size = crypto_hash_digestsize(mdev->verify_tfm); |
| /* FIXME if this allocation fails, online verify will not terminate! */ |
| digest = kmalloc(digest_size, GFP_NOIO); |
| if (digest) { |
| drbd_csum(mdev, mdev->verify_tfm, e->private_bio, digest); |
| inc_rs_pending(mdev); |
| ok = drbd_send_drequest_csum(mdev, e->sector, e->size, |
| digest, digest_size, P_OV_REPLY); |
| if (!ok) |
| dec_rs_pending(mdev); |
| kfree(digest); |
| } |
| |
| out: |
| drbd_free_ee(mdev, e); |
| |
| dec_unacked(mdev); |
| |
| return ok; |
| } |
| |
| void drbd_ov_oos_found(struct drbd_conf *mdev, sector_t sector, int size) |
| { |
| if (mdev->ov_last_oos_start + mdev->ov_last_oos_size == sector) { |
| mdev->ov_last_oos_size += size>>9; |
| } else { |
| mdev->ov_last_oos_start = sector; |
| mdev->ov_last_oos_size = size>>9; |
| } |
| drbd_set_out_of_sync(mdev, sector, size); |
| set_bit(WRITE_BM_AFTER_RESYNC, &mdev->flags); |
| } |
| |
| int w_e_end_ov_reply(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| struct drbd_epoch_entry *e = container_of(w, struct drbd_epoch_entry, w); |
| struct digest_info *di; |
| int digest_size; |
| void *digest; |
| int ok, eq = 0; |
| |
| if (unlikely(cancel)) { |
| drbd_free_ee(mdev, e); |
| dec_unacked(mdev); |
| return 1; |
| } |
| |
| /* after "cancel", because after drbd_disconnect/drbd_rs_cancel_all |
| * the resync lru has been cleaned up already */ |
| drbd_rs_complete_io(mdev, e->sector); |
| |
| di = (struct digest_info *)(unsigned long)e->block_id; |
| |
| if (likely(drbd_bio_uptodate(e->private_bio))) { |
| digest_size = crypto_hash_digestsize(mdev->verify_tfm); |
| digest = kmalloc(digest_size, GFP_NOIO); |
| if (digest) { |
| drbd_csum(mdev, mdev->verify_tfm, e->private_bio, digest); |
| |
| D_ASSERT(digest_size == di->digest_size); |
| eq = !memcmp(digest, di->digest, digest_size); |
| kfree(digest); |
| } |
| } else { |
| ok = drbd_send_ack(mdev, P_NEG_RS_DREPLY, e); |
| if (__ratelimit(&drbd_ratelimit_state)) |
| dev_err(DEV, "Sending NegDReply. I guess it gets messy.\n"); |
| } |
| |
| dec_unacked(mdev); |
| |
| kfree(di); |
| |
| if (!eq) |
| drbd_ov_oos_found(mdev, e->sector, e->size); |
| else |
| ov_oos_print(mdev); |
| |
| ok = drbd_send_ack_ex(mdev, P_OV_RESULT, e->sector, e->size, |
| eq ? ID_IN_SYNC : ID_OUT_OF_SYNC); |
| |
| drbd_free_ee(mdev, e); |
| |
| if (--mdev->ov_left == 0) { |
| ov_oos_print(mdev); |
| drbd_resync_finished(mdev); |
| } |
| |
| return ok; |
| } |
| |
| int w_prev_work_done(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| struct drbd_wq_barrier *b = container_of(w, struct drbd_wq_barrier, w); |
| complete(&b->done); |
| return 1; |
| } |
| |
| int w_send_barrier(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| struct drbd_tl_epoch *b = container_of(w, struct drbd_tl_epoch, w); |
| struct p_barrier *p = &mdev->data.sbuf.barrier; |
| int ok = 1; |
| |
| /* really avoid racing with tl_clear. w.cb may have been referenced |
| * just before it was reassigned and re-queued, so double check that. |
| * actually, this race was harmless, since we only try to send the |
| * barrier packet here, and otherwise do nothing with the object. |
| * but compare with the head of w_clear_epoch */ |
| spin_lock_irq(&mdev->req_lock); |
| if (w->cb != w_send_barrier || mdev->state.conn < C_CONNECTED) |
| cancel = 1; |
| spin_unlock_irq(&mdev->req_lock); |
| if (cancel) |
| return 1; |
| |
| if (!drbd_get_data_sock(mdev)) |
| return 0; |
| p->barrier = b->br_number; |
| /* inc_ap_pending was done where this was queued. |
| * dec_ap_pending will be done in got_BarrierAck |
| * or (on connection loss) in w_clear_epoch. */ |
| ok = _drbd_send_cmd(mdev, mdev->data.socket, P_BARRIER, |
| (struct p_header *)p, sizeof(*p), 0); |
| drbd_put_data_sock(mdev); |
| |
| return ok; |
| } |
| |
| int w_send_write_hint(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| if (cancel) |
| return 1; |
| return drbd_send_short_cmd(mdev, P_UNPLUG_REMOTE); |
| } |
| |
| /** |
| * w_send_dblock() - Worker callback to send a P_DATA packet in order to mirror a write request |
| * @mdev: DRBD device. |
| * @w: work object. |
| * @cancel: The connection will be closed anyways |
| */ |
| int w_send_dblock(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| struct drbd_request *req = container_of(w, struct drbd_request, w); |
| int ok; |
| |
| if (unlikely(cancel)) { |
| req_mod(req, send_canceled); |
| return 1; |
| } |
| |
| ok = drbd_send_dblock(mdev, req); |
| req_mod(req, ok ? handed_over_to_network : send_failed); |
| |
| return ok; |
| } |
| |
| /** |
| * w_send_read_req() - Worker callback to send a read request (P_DATA_REQUEST) packet |
| * @mdev: DRBD device. |
| * @w: work object. |
| * @cancel: The connection will be closed anyways |
| */ |
| int w_send_read_req(struct drbd_conf *mdev, struct drbd_work *w, int cancel) |
| { |
| struct drbd_request *req = container_of(w, struct drbd_request, w); |
| int ok; |
| |
| if (unlikely(cancel)) { |
| req_mod(req, send_canceled); |
| return 1; |
| } |
| |
| ok = drbd_send_drequest(mdev, P_DATA_REQUEST, req->sector, req->size, |
| (unsigned long)req); |
| |
| if (!ok) { |
| /* ?? we set C_TIMEOUT or C_BROKEN_PIPE in drbd_send(); |
| * so this is probably redundant */ |
| if (mdev->state.conn >= C_CONNECTED) |
| drbd_force_state(mdev, NS(conn, C_NETWORK_FAILURE)); |
| } |
| req_mod(req, ok ? handed_over_to_network : send_failed); |
| |
| return ok; |
| } |
| |
| static int _drbd_may_sync_now(struct drbd_conf *mdev) |
| { |
| struct drbd_conf *odev = mdev; |
| |
| while (1) { |
| if (odev->sync_conf.after == -1) |
| return 1; |
| odev = minor_to_mdev(odev->sync_conf.after); |
| ERR_IF(!odev) return 1; |
| if ((odev->state.conn >= C_SYNC_SOURCE && |
| odev->state.conn <= C_PAUSED_SYNC_T) || |
| odev->state.aftr_isp || odev->state.peer_isp || |
| odev->state.user_isp) |
| return 0; |
| } |
| } |
| |
| /** |
| * _drbd_pause_after() - Pause resync on all devices that may not resync now |
| * @mdev: DRBD device. |
| * |
| * Called from process context only (admin command and after_state_ch). |
| */ |
| static int _drbd_pause_after(struct drbd_conf *mdev) |
| { |
| struct drbd_conf *odev; |
| int i, rv = 0; |
| |
| for (i = 0; i < minor_count; i++) { |
| odev = minor_to_mdev(i); |
| if (!odev) |
| continue; |
| if (odev->state.conn == C_STANDALONE && odev->state.disk == D_DISKLESS) |
| continue; |
| if (!_drbd_may_sync_now(odev)) |
| rv |= (__drbd_set_state(_NS(odev, aftr_isp, 1), CS_HARD, NULL) |
| != SS_NOTHING_TO_DO); |
| } |
| |
| return rv; |
| } |
| |
| /** |
| * _drbd_resume_next() - Resume resync on all devices that may resync now |
| * @mdev: DRBD device. |
| * |
| * Called from process context only (admin command and worker). |
| */ |
| static int _drbd_resume_next(struct drbd_conf *mdev) |
| { |
| struct drbd_conf *odev; |
| int i, rv = 0; |
| |
| for (i = 0; i < minor_count; i++) { |
| odev = minor_to_mdev(i); |
| if (!odev) |
| continue; |
| if (odev->state.conn == C_STANDALONE && odev->state.disk == D_DISKLESS) |
| continue; |
| if (odev->state.aftr_isp) { |
| if (_drbd_may_sync_now(odev)) |
| rv |= (__drbd_set_state(_NS(odev, aftr_isp, 0), |
| CS_HARD, NULL) |
| != SS_NOTHING_TO_DO) ; |
| } |
| } |
| return rv; |
| } |
| |
| void resume_next_sg(struct drbd_conf *mdev) |
| { |
| write_lock_irq(&global_state_lock); |
| _drbd_resume_next(mdev); |
| write_unlock_irq(&global_state_lock); |
| } |
| |
| void suspend_other_sg(struct drbd_conf *mdev) |
| { |
| write_lock_irq(&global_state_lock); |
| _drbd_pause_after(mdev); |
| write_unlock_irq(&global_state_lock); |
| } |
| |
| static int sync_after_error(struct drbd_conf *mdev, int o_minor) |
| { |
| struct drbd_conf *odev; |
| |
| if (o_minor == -1) |
| return NO_ERROR; |
| if (o_minor < -1 || minor_to_mdev(o_minor) == NULL) |
| return ERR_SYNC_AFTER; |
| |
| /* check for loops */ |
| odev = minor_to_mdev(o_minor); |
| while (1) { |
| if (odev == mdev) |
| return ERR_SYNC_AFTER_CYCLE; |
| |
| /* dependency chain ends here, no cycles. */ |
| if (odev->sync_conf.after == -1) |
| return NO_ERROR; |
| |
| /* follow the dependency chain */ |
| odev = minor_to_mdev(odev->sync_conf.after); |
| } |
| } |
| |
| int drbd_alter_sa(struct drbd_conf *mdev, int na) |
| { |
| int changes; |
| int retcode; |
| |
| write_lock_irq(&global_state_lock); |
| retcode = sync_after_error(mdev, na); |
| if (retcode == NO_ERROR) { |
| mdev->sync_conf.after = na; |
| do { |
| changes = _drbd_pause_after(mdev); |
| changes |= _drbd_resume_next(mdev); |
| } while (changes); |
| } |
| write_unlock_irq(&global_state_lock); |
| return retcode; |
| } |
| |
| /** |
| * drbd_start_resync() - Start the resync process |
| * @mdev: DRBD device. |
| * @side: Either C_SYNC_SOURCE or C_SYNC_TARGET |
| * |
| * This function might bring you directly into one of the |
| * C_PAUSED_SYNC_* states. |
| */ |
| void drbd_start_resync(struct drbd_conf *mdev, enum drbd_conns side) |
| { |
| union drbd_state ns; |
| int r; |
| |
| if (mdev->state.conn >= C_SYNC_SOURCE) { |
| dev_err(DEV, "Resync already running!\n"); |
| return; |
| } |
| |
| /* In case a previous resync run was aborted by an IO error/detach on the peer. */ |
| drbd_rs_cancel_all(mdev); |
| |
| if (side == C_SYNC_TARGET) { |
| /* Since application IO was locked out during C_WF_BITMAP_T and |
| C_WF_SYNC_UUID we are still unmodified. Before going to C_SYNC_TARGET |
| we check that we might make the data inconsistent. */ |
| r = drbd_khelper(mdev, "before-resync-target"); |
| r = (r >> 8) & 0xff; |
| if (r > 0) { |
| dev_info(DEV, "before-resync-target handler returned %d, " |
| "dropping connection.\n", r); |
| drbd_force_state(mdev, NS(conn, C_DISCONNECTING)); |
| return; |
| } |
| } |
| |
| drbd_state_lock(mdev); |
| |
| if (!get_ldev_if_state(mdev, D_NEGOTIATING)) { |
| drbd_state_unlock(mdev); |
| return; |
| } |
| |
| if (side == C_SYNC_TARGET) { |
| mdev->bm_resync_fo = 0; |
| } else /* side == C_SYNC_SOURCE */ { |
| u64 uuid; |
| |
| get_random_bytes(&uuid, sizeof(u64)); |
| drbd_uuid_set(mdev, UI_BITMAP, uuid); |
| drbd_send_sync_uuid(mdev, uuid); |
| |
| D_ASSERT(mdev->state.disk == D_UP_TO_DATE); |
| } |
| |
| write_lock_irq(&global_state_lock); |
| ns = mdev->state; |
| |
| ns.aftr_isp = !_drbd_may_sync_now(mdev); |
| |
| ns.conn = side; |
| |
| if (side == C_SYNC_TARGET) |
| ns.disk = D_INCONSISTENT; |
| else /* side == C_SYNC_SOURCE */ |
| ns.pdsk = D_INCONSISTENT; |
| |
| r = __drbd_set_state(mdev, ns, CS_VERBOSE, NULL); |
| ns = mdev->state; |
| |
| if (ns.conn < C_CONNECTED) |
| r = SS_UNKNOWN_ERROR; |
| |
| if (r == SS_SUCCESS) { |
| mdev->rs_total = |
| mdev->rs_mark_left = drbd_bm_total_weight(mdev); |
| mdev->rs_failed = 0; |
| mdev->rs_paused = 0; |
| mdev->rs_start = |
| mdev->rs_mark_time = jiffies; |
| mdev->rs_same_csum = 0; |
| _drbd_pause_after(mdev); |
| } |
| write_unlock_irq(&global_state_lock); |
| drbd_state_unlock(mdev); |
| put_ldev(mdev); |
| |
| if (r == SS_SUCCESS) { |
| dev_info(DEV, "Began resync as %s (will sync %lu KB [%lu bits set]).\n", |
| drbd_conn_str(ns.conn), |
| (unsigned long) mdev->rs_total << (BM_BLOCK_SHIFT-10), |
| (unsigned long) mdev->rs_total); |
| |
| if (mdev->rs_total == 0) { |
| /* Peer still reachable? Beware of failing before-resync-target handlers! */ |
| request_ping(mdev); |
| __set_current_state(TASK_INTERRUPTIBLE); |
| schedule_timeout(mdev->net_conf->ping_timeo*HZ/9); /* 9 instead 10 */ |
| drbd_resync_finished(mdev); |
| return; |
| } |
| |
| /* ns.conn may already be != mdev->state.conn, |
| * we may have been paused in between, or become paused until |
| * the timer triggers. |
| * No matter, that is handled in resync_timer_fn() */ |
| if (ns.conn == C_SYNC_TARGET) |
| mod_timer(&mdev->resync_timer, jiffies); |
| |
| drbd_md_sync(mdev); |
| } |
| } |
| |
| int drbd_worker(struct drbd_thread *thi) |
| { |
| struct drbd_conf *mdev = thi->mdev; |
| struct drbd_work *w = NULL; |
| LIST_HEAD(work_list); |
| int intr = 0, i; |
| |
| sprintf(current->comm, "drbd%d_worker", mdev_to_minor(mdev)); |
| |
| while (get_t_state(thi) == Running) { |
| drbd_thread_current_set_cpu(mdev); |
| |
| if (down_trylock(&mdev->data.work.s)) { |
| mutex_lock(&mdev->data.mutex); |
| if (mdev->data.socket && !mdev->net_conf->no_cork) |
| drbd_tcp_uncork(mdev->data.socket); |
| mutex_unlock(&mdev->data.mutex); |
| |
| intr = down_interruptible(&mdev->data.work.s); |
| |
| mutex_lock(&mdev->data.mutex); |
| if (mdev->data.socket && !mdev->net_conf->no_cork) |
| drbd_tcp_cork(mdev->data.socket); |
| mutex_unlock(&mdev->data.mutex); |
| } |
| |
| if (intr) { |
| D_ASSERT(intr == -EINTR); |
| flush_signals(current); |
| ERR_IF (get_t_state(thi) == Running) |
| continue; |
| break; |
| } |
| |
| if (get_t_state(thi) != Running) |
| break; |
| /* With this break, we have done a down() but not consumed |
| the entry from the list. The cleanup code takes care of |
| this... */ |
| |
| w = NULL; |
| spin_lock_irq(&mdev->data.work.q_lock); |
| ERR_IF(list_empty(&mdev->data.work.q)) { |
| /* something terribly wrong in our logic. |
| * we were able to down() the semaphore, |
| * but the list is empty... doh. |
| * |
| * what is the best thing to do now? |
| * try again from scratch, restarting the receiver, |
| * asender, whatnot? could break even more ugly, |
| * e.g. when we are primary, but no good local data. |
| * |
| * I'll try to get away just starting over this loop. |
| */ |
| spin_unlock_irq(&mdev->data.work.q_lock); |
| continue; |
| } |
| w = list_entry(mdev->data.work.q.next, struct drbd_work, list); |
| list_del_init(&w->list); |
| spin_unlock_irq(&mdev->data.work.q_lock); |
| |
| if (!w->cb(mdev, w, mdev->state.conn < C_CONNECTED)) { |
| /* dev_warn(DEV, "worker: a callback failed! \n"); */ |
| if (mdev->state.conn >= C_CONNECTED) |
| drbd_force_state(mdev, |
| NS(conn, C_NETWORK_FAILURE)); |
| } |
| } |
| D_ASSERT(test_bit(DEVICE_DYING, &mdev->flags)); |
| D_ASSERT(test_bit(CONFIG_PENDING, &mdev->flags)); |
| |
| spin_lock_irq(&mdev->data.work.q_lock); |
| i = 0; |
| while (!list_empty(&mdev->data.work.q)) { |
| list_splice_init(&mdev->data.work.q, &work_list); |
| spin_unlock_irq(&mdev->data.work.q_lock); |
| |
| while (!list_empty(&work_list)) { |
| w = list_entry(work_list.next, struct drbd_work, list); |
| list_del_init(&w->list); |
| w->cb(mdev, w, 1); |
| i++; /* dead debugging code */ |
| } |
| |
| spin_lock_irq(&mdev->data.work.q_lock); |
| } |
| sema_init(&mdev->data.work.s, 0); |
| /* DANGEROUS race: if someone did queue his work within the spinlock, |
| * but up() ed outside the spinlock, we could get an up() on the |
| * semaphore without corresponding list entry. |
| * So don't do that. |
| */ |
| spin_unlock_irq(&mdev->data.work.q_lock); |
| |
| D_ASSERT(mdev->state.disk == D_DISKLESS && mdev->state.conn == C_STANDALONE); |
| /* _drbd_set_state only uses stop_nowait. |
| * wait here for the Exiting receiver. */ |
| drbd_thread_stop(&mdev->receiver); |
| drbd_mdev_cleanup(mdev); |
| |
| dev_info(DEV, "worker terminated\n"); |
| |
| clear_bit(DEVICE_DYING, &mdev->flags); |
| clear_bit(CONFIG_PENDING, &mdev->flags); |
| wake_up(&mdev->state_wait); |
| |
| return 0; |
| } |