| /* |
| STB0899 Multistandard Frontend driver |
| Copyright (C) Manu Abraham (abraham.manu@gmail.com) |
| |
| Copyright (C) ST Microelectronics |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #ifndef __STB0899_DRV_H |
| #define __STB0899_DRV_H |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| |
| #include "dvb_frontend.h" |
| |
| #define STB0899_TSMODE_SERIAL 1 |
| #define STB0899_CLKPOL_FALLING 2 |
| #define STB0899_CLKNULL_PARITY 3 |
| #define STB0899_SYNC_FORCED 4 |
| #define STB0899_FECMODE_DSS 5 |
| |
| struct stb0899_s1_reg { |
| u16 address; |
| u8 data; |
| }; |
| |
| struct stb0899_s2_reg { |
| u16 offset; |
| u32 base_address; |
| u32 data; |
| }; |
| |
| enum stb0899_inversion { |
| IQ_SWAP_OFF = +1, /* inversion affects the sign of e. g. */ |
| IQ_SWAP_ON = -1, /* the derotator frequency register */ |
| }; |
| |
| #define STB0899_GPIO00 0xf140 |
| #define STB0899_GPIO01 0xf141 |
| #define STB0899_GPIO02 0xf142 |
| #define STB0899_GPIO03 0xf143 |
| #define STB0899_GPIO04 0xf144 |
| #define STB0899_GPIO05 0xf145 |
| #define STB0899_GPIO06 0xf146 |
| #define STB0899_GPIO07 0xf147 |
| #define STB0899_GPIO08 0xf148 |
| #define STB0899_GPIO09 0xf149 |
| #define STB0899_GPIO10 0xf14a |
| #define STB0899_GPIO11 0xf14b |
| #define STB0899_GPIO12 0xf14c |
| #define STB0899_GPIO13 0xf14d |
| #define STB0899_GPIO14 0xf14e |
| #define STB0899_GPIO15 0xf14f |
| #define STB0899_GPIO16 0xf150 |
| #define STB0899_GPIO17 0xf151 |
| #define STB0899_GPIO18 0xf152 |
| #define STB0899_GPIO19 0xf153 |
| #define STB0899_GPIO20 0xf154 |
| |
| #define STB0899_GPIOPULLUP 0x01 /* Output device is connected to Vdd */ |
| #define STB0899_GPIOPULLDN 0x00 /* Output device is connected to Vss */ |
| |
| #define STB0899_POSTPROC_GPIO_POWER 0x00 |
| #define STB0899_POSTPROC_GPIO_LOCK 0x01 |
| |
| /* |
| * Post process output configuration control |
| * 1. POWER ON/OFF (index 0) |
| * 2. FE_HAS_LOCK/LOCK_LOSS (index 1) |
| * |
| * @gpio = one of the above listed GPIO's |
| * @level = output state: pulled up or low |
| */ |
| struct stb0899_postproc { |
| u16 gpio; |
| u8 level; |
| }; |
| |
| struct stb0899_config { |
| const struct stb0899_s1_reg *init_dev; |
| const struct stb0899_s2_reg *init_s2_demod; |
| const struct stb0899_s1_reg *init_s1_demod; |
| const struct stb0899_s2_reg *init_s2_fec; |
| const struct stb0899_s1_reg *init_tst; |
| |
| const struct stb0899_postproc *postproc; |
| |
| enum stb0899_inversion inversion; |
| |
| u32 xtal_freq; |
| |
| u8 demod_address; |
| u8 ts_output_mode; |
| u8 block_sync_mode; |
| u8 ts_pfbit_toggle; |
| |
| u8 clock_polarity; |
| u8 data_clk_parity; |
| u8 fec_mode; |
| u8 data_output_ctl; |
| u8 data_fifo_mode; |
| u8 out_rate_comp; |
| u8 i2c_repeater; |
| // int inversion; |
| int lo_clk; |
| int hi_clk; |
| |
| u32 esno_ave; |
| u32 esno_quant; |
| u32 avframes_coarse; |
| u32 avframes_fine; |
| u32 miss_threshold; |
| u32 uwp_threshold_acq; |
| u32 uwp_threshold_track; |
| u32 uwp_threshold_sof; |
| u32 sof_search_timeout; |
| |
| u32 btr_nco_bits; |
| u32 btr_gain_shift_offset; |
| u32 crl_nco_bits; |
| u32 ldpc_max_iter; |
| |
| int (*tuner_set_frequency)(struct dvb_frontend *fe, u32 frequency); |
| int (*tuner_get_frequency)(struct dvb_frontend *fe, u32 *frequency); |
| int (*tuner_set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth); |
| int (*tuner_get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth); |
| int (*tuner_set_rfsiggain)(struct dvb_frontend *fe, u32 rf_gain); |
| }; |
| |
| #if IS_REACHABLE(CONFIG_DVB_STB0899) |
| |
| extern struct dvb_frontend *stb0899_attach(struct stb0899_config *config, |
| struct i2c_adapter *i2c); |
| |
| #else |
| |
| static inline struct dvb_frontend *stb0899_attach(struct stb0899_config *config, |
| struct i2c_adapter *i2c) |
| { |
| printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); |
| return NULL; |
| } |
| |
| #endif //CONFIG_DVB_STB0899 |
| |
| |
| #endif |