drivers/usb/host/ehci-pmcmsp.c - kernel/msm-4.9 - Gitiles

 /*
  * PMC MSP EHCI (Host Controller Driver) for USB.
  *
  * (C) Copyright 2006-2010 PMC-Sierra Inc
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
  */

 /* includes */
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/usb.h>
 #include <msp_usb.h>

 /* stream disable*/
 #define USB_CTRL_MODE_STREAM_DISABLE	0x10

 /* threshold */
 #define USB_CTRL_FIFO_THRESH		0x00300000

 /* register offset for usb_mode */
 #define USB_EHCI_REG_USB_MODE		0x68

 /* register offset for usb fifo */
 #define USB_EHCI_REG_USB_FIFO		0x24

 /* register offset for usb status */
 #define USB_EHCI_REG_USB_STATUS		0x44

 /* serial/parallel transceiver */
 #define USB_EHCI_REG_BIT_STAT_STS	(1<<29)

 /* TWI USB0 host device pin */
 #define MSP_PIN_USB0_HOST_DEV		49

 /* TWI USB1 host device pin */
 #define MSP_PIN_USB1_HOST_DEV		50


 static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci)
 {
 	u8 *base;
 	u8 *statreg;
 	u8 *fiforeg;
 	u32 val;
 	struct ehci_regs *reg_base = ehci->regs;

 	/* get register base */
 	base = (u8 *)reg_base + USB_EHCI_REG_USB_MODE;
 	statreg = (u8 *)reg_base + USB_EHCI_REG_USB_STATUS;
 	fiforeg = (u8 *)reg_base + USB_EHCI_REG_USB_FIFO;

 	/* Disable controller mode stream */
 	val = ehci_readl(ehci, (u32 *)base);
 	ehci_writel(ehci, (val | USB_CTRL_MODE_STREAM_DISABLE),
 			(u32 *)base);

 	/* clear STS to select parallel transceiver interface */
 	val = ehci_readl(ehci, (u32 *)statreg);
 	val = val & ~USB_EHCI_REG_BIT_STAT_STS;
 	ehci_writel(ehci, val, (u32 *)statreg);

 	/* write to set the proper fifo threshold */
 	ehci_writel(ehci, USB_CTRL_FIFO_THRESH, (u32 *)fiforeg);

 	/* set TWI GPIO USB_HOST_DEV pin high */
 	gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1);
 }

 /* called during probe() after chip reset completes */
 static int ehci_msp_setup(struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	int			retval;

 	ehci->big_endian_mmio = 1;
 	ehci->big_endian_desc = 1;

 	ehci->caps = hcd->regs;
 	hcd->has_tt = 1;

 	retval = ehci_setup(hcd);
 	if (retval)
 		return retval;

 	usb_hcd_tdi_set_mode(ehci);

 	return retval;
 }


 /* configure so an HC device and id are always provided
  * always called with process context; sleeping is OK
  */

 static int usb_hcd_msp_map_regs(struct mspusb_device *dev)
 {
 	struct resource *res;
 	struct platform_device *pdev = &dev->dev;
 	u32 res_len;
 	int retval;

 	/* MAB register space */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (res == NULL)
 		return -ENOMEM;
 	res_len = resource_size(res);
 	if (!request_mem_region(res->start, res_len, "mab regs"))
 		return -EBUSY;

 	dev->mab_regs = ioremap_nocache(res->start, res_len);
 	if (dev->mab_regs == NULL) {
 		retval = -ENOMEM;
 		goto err1;
 	}

 	/* MSP USB register space */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
 	if (res == NULL) {
 		retval = -ENOMEM;
 		goto err2;
 	}
 	res_len = resource_size(res);
 	if (!request_mem_region(res->start, res_len, "usbid regs")) {
 		retval = -EBUSY;
 		goto err2;
 	}
 	dev->usbid_regs = ioremap_nocache(res->start, res_len);
 	if (dev->usbid_regs == NULL) {
 		retval = -ENOMEM;
 		goto err3;
 	}

 	return 0;
 err3:
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
 	res_len = resource_size(res);
 	release_mem_region(res->start, res_len);
 err2:
 	iounmap(dev->mab_regs);
 err1:
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	res_len = resource_size(res);
 	release_mem_region(res->start, res_len);
 	dev_err(&pdev->dev, "Failed to map non-EHCI regs.\n");
 	return retval;
 }

 /**
  * usb_hcd_msp_probe - initialize PMC MSP-based HCDs
  * Context: !in_interrupt()
  *
  * Allocates basic resources for this USB host controller, and
  * then invokes the start() method for the HCD associated with it
  * through the hotplug entry's driver_data.
  *
  */
 int usb_hcd_msp_probe(const struct hc_driver *driver,
 			  struct platform_device *dev)
 {
 	int retval;
 	struct usb_hcd *hcd;
 	struct resource *res;
 	struct ehci_hcd		*ehci ;

 	hcd = usb_create_hcd(driver, &dev->dev, "pmcmsp");
 	if (!hcd)
 		return -ENOMEM;

 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
 		pr_debug("No IOMEM resource info for %s.\n", dev->name);
 		retval = -ENOMEM;
 		goto err1;
 	}
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, dev->name)) {
 		retval = -EBUSY;
 		goto err1;
 	}
 	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
 	if (!hcd->regs) {
 		pr_debug("ioremap failed");
 		retval = -ENOMEM;
 		goto err2;
 	}

 	res = platform_get_resource(dev, IORESOURCE_IRQ, 0);
 	if (res == NULL) {
 		dev_err(&dev->dev, "No IRQ resource info for %s.\n", dev->name);
 		retval = -ENOMEM;
 		goto err3;
 	}

 	/* Map non-EHCI register spaces */
 	retval = usb_hcd_msp_map_regs(to_mspusb_device(dev));
 	if (retval != 0)
 		goto err3;

 	ehci = hcd_to_ehci(hcd);
 	ehci->big_endian_mmio = 1;
 	ehci->big_endian_desc = 1;


 	retval = usb_add_hcd(hcd, res->start, IRQF_SHARED);
 	if (retval == 0) {
 		device_wakeup_enable(hcd->self.controller);
 		return 0;
 	}

 	usb_remove_hcd(hcd);
 err3:
 	iounmap(hcd->regs);
 err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 err1:
 	usb_put_hcd(hcd);

 	return retval;
 }


 /**
  * usb_hcd_msp_remove - shutdown processing for PMC MSP-based HCDs
  * @dev: USB Host Controller being removed
  * Context: !in_interrupt()
  *
  * Reverses the effect of usb_hcd_msp_probe(), first invoking
  * the HCD's stop() method.  It is always called from a thread
  * context, normally "rmmod", "apmd", or something similar.
  *
  * may be called without controller electrically present
  * may be called with controller, bus, and devices active
  */
 void usb_hcd_msp_remove(struct usb_hcd *hcd, struct platform_device *dev)
 {
 	usb_remove_hcd(hcd);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
 }

 static const struct hc_driver ehci_msp_hc_driver = {
 	.description =		hcd_name,
 	.product_desc =		"PMC MSP EHCI",
 	.hcd_priv_size =	sizeof(struct ehci_hcd),

 	/*
 	 * generic hardware linkage
 	 */
 	.irq =			ehci_irq,
 	.flags =		HCD_MEMORY | HCD_USB2 | HCD_BH,

 	/*
 	 * basic lifecycle operations
 	 */
 	.reset			= ehci_msp_setup,
 	.shutdown		= ehci_shutdown,
 	.start			= ehci_run,
 	.stop			= ehci_stop,

 	/*
 	 * managing i/o requests and associated device resources
 	 */
 	.urb_enqueue		= ehci_urb_enqueue,
 	.urb_dequeue		= ehci_urb_dequeue,
 	.endpoint_disable	= ehci_endpoint_disable,
 	.endpoint_reset		= ehci_endpoint_reset,

 	/*
 	 * scheduling support
 	 */
 	.get_frame_number	= ehci_get_frame,

 	/*
 	 * root hub support
 	 */
 	.hub_status_data	= ehci_hub_status_data,
 	.hub_control		= ehci_hub_control,
 	.bus_suspend		= ehci_bus_suspend,
 	.bus_resume		= ehci_bus_resume,
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,

 	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };

 static int ehci_hcd_msp_drv_probe(struct platform_device *pdev)
 {
 	int ret;

 	pr_debug("In ehci_hcd_msp_drv_probe");

 	if (usb_disabled())
 		return -ENODEV;

 	gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO");

 	ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev);

 	return ret;
 }

 static int ehci_hcd_msp_drv_remove(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);

 	usb_hcd_msp_remove(hcd, pdev);

 	/* free TWI GPIO USB_HOST_DEV pin */
 	gpio_free(MSP_PIN_USB0_HOST_DEV);

 	return 0;
 }

 MODULE_ALIAS("pmcmsp-ehci");

 static struct platform_driver ehci_hcd_msp_driver = {
 	.probe		= ehci_hcd_msp_drv_probe,
 	.remove		= ehci_hcd_msp_drv_remove,
 	.driver		= {
 		.name	= "pmcmsp-ehci",
 	},
 };
	/*
	* PMC MSP EHCI (Host Controller Driver) for USB.
	*
	* (C) Copyright 2006-2010 PMC-Sierra Inc
	*
	* This file is subject to the terms and conditions of the GNU General Public
	* License. See the file "COPYING" in the main directory of this archive
	* for more details.
	*
	*/

	/* includes */
	#include <linux/platform_device.h>
	#include <linux/gpio.h>
	#include <linux/usb.h>
	#include <msp_usb.h>

	/* stream disable*/
	#define USB_CTRL_MODE_STREAM_DISABLE 0x10

	/* threshold */
	#define USB_CTRL_FIFO_THRESH 0x00300000

	/* register offset for usb_mode */
	#define USB_EHCI_REG_USB_MODE 0x68

	/* register offset for usb fifo */
	#define USB_EHCI_REG_USB_FIFO 0x24

	/* register offset for usb status */
	#define USB_EHCI_REG_USB_STATUS 0x44

	/* serial/parallel transceiver */
	#define USB_EHCI_REG_BIT_STAT_STS (1<<29)

	/* TWI USB0 host device pin */
	#define MSP_PIN_USB0_HOST_DEV 49

	/* TWI USB1 host device pin */
	#define MSP_PIN_USB1_HOST_DEV 50


	static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci)
	{
	u8 *base;
	u8 *statreg;
	u8 *fiforeg;
	u32 val;
	struct ehci_regs *reg_base = ehci->regs;

	/* get register base */
	base = (u8 *)reg_base + USB_EHCI_REG_USB_MODE;
	statreg = (u8 *)reg_base + USB_EHCI_REG_USB_STATUS;
	fiforeg = (u8 *)reg_base + USB_EHCI_REG_USB_FIFO;

	/* Disable controller mode stream */
	val = ehci_readl(ehci, (u32 *)base);
	ehci_writel(ehci, (val \| USB_CTRL_MODE_STREAM_DISABLE),
	(u32 *)base);

	/* clear STS to select parallel transceiver interface */
	val = ehci_readl(ehci, (u32 *)statreg);
	val = val & ~USB_EHCI_REG_BIT_STAT_STS;
	ehci_writel(ehci, val, (u32 *)statreg);

	/* write to set the proper fifo threshold */
	ehci_writel(ehci, USB_CTRL_FIFO_THRESH, (u32 *)fiforeg);

	/* set TWI GPIO USB_HOST_DEV pin high */
	gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1);
	}

	/* called during probe() after chip reset completes */
	static int ehci_msp_setup(struct usb_hcd *hcd)
	{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	int retval;

	ehci->big_endian_mmio = 1;
	ehci->big_endian_desc = 1;

	ehci->caps = hcd->regs;
	hcd->has_tt = 1;

	retval = ehci_setup(hcd);
	if (retval)
	return retval;

	usb_hcd_tdi_set_mode(ehci);

	return retval;
	}


	/* configure so an HC device and id are always provided
	* always called with process context; sleeping is OK
	*/

	static int usb_hcd_msp_map_regs(struct mspusb_device *dev)
	{
	struct resource *res;
	struct platform_device *pdev = &dev->dev;
	u32 res_len;
	int retval;

	/* MAB register space */
	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	if (res == NULL)
	return -ENOMEM;
	res_len = resource_size(res);
	if (!request_mem_region(res->start, res_len, "mab regs"))
	return -EBUSY;

	dev->mab_regs = ioremap_nocache(res->start, res_len);
	if (dev->mab_regs == NULL) {
	retval = -ENOMEM;
	goto err1;
	}

	/* MSP USB register space */
	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
	if (res == NULL) {
	retval = -ENOMEM;
	goto err2;
	}
	res_len = resource_size(res);
	if (!request_mem_region(res->start, res_len, "usbid regs")) {
	retval = -EBUSY;
	goto err2;
	}
	dev->usbid_regs = ioremap_nocache(res->start, res_len);
	if (dev->usbid_regs == NULL) {
	retval = -ENOMEM;
	goto err3;
	}

	return 0;
	err3:
	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
	res_len = resource_size(res);
	release_mem_region(res->start, res_len);
	err2:
	iounmap(dev->mab_regs);
	err1:
	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	res_len = resource_size(res);
	release_mem_region(res->start, res_len);
	dev_err(&pdev->dev, "Failed to map non-EHCI regs.\n");
	return retval;
	}

	/**
	* usb_hcd_msp_probe - initialize PMC MSP-based HCDs
	* Context: !in_interrupt()
	*
	* Allocates basic resources for this USB host controller, and
	* then invokes the start() method for the HCD associated with it
	* through the hotplug entry's driver_data.
	*
	*/
	int usb_hcd_msp_probe(const struct hc_driver *driver,
	struct platform_device *dev)
	{
	int retval;
	struct usb_hcd *hcd;
	struct resource *res;
	struct ehci_hcd *ehci ;

	hcd = usb_create_hcd(driver, &dev->dev, "pmcmsp");
	if (!hcd)
	return -ENOMEM;

	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
	if (res == NULL) {
	pr_debug("No IOMEM resource info for %s.\n", dev->name);
	retval = -ENOMEM;
	goto err1;
	}
	hcd->rsrc_start = res->start;
	hcd->rsrc_len = resource_size(res);
	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, dev->name)) {
	retval = -EBUSY;
	goto err1;
	}
	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
	if (!hcd->regs) {
	pr_debug("ioremap failed");
	retval = -ENOMEM;
	goto err2;
	}

	res = platform_get_resource(dev, IORESOURCE_IRQ, 0);
	if (res == NULL) {
	dev_err(&dev->dev, "No IRQ resource info for %s.\n", dev->name);
	retval = -ENOMEM;
	goto err3;
	}

	/* Map non-EHCI register spaces */
	retval = usb_hcd_msp_map_regs(to_mspusb_device(dev));
	if (retval != 0)
	goto err3;

	ehci = hcd_to_ehci(hcd);
	ehci->big_endian_mmio = 1;
	ehci->big_endian_desc = 1;


	retval = usb_add_hcd(hcd, res->start, IRQF_SHARED);
	if (retval == 0) {
	device_wakeup_enable(hcd->self.controller);
	return 0;
	}

	usb_remove_hcd(hcd);
	err3:
	iounmap(hcd->regs);
	err2:
	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
	err1:
	usb_put_hcd(hcd);

	return retval;
	}



	/**
	* usb_hcd_msp_remove - shutdown processing for PMC MSP-based HCDs
	* @dev: USB Host Controller being removed
	* Context: !in_interrupt()
	*
	* Reverses the effect of usb_hcd_msp_probe(), first invoking
	* the HCD's stop() method. It is always called from a thread
	* context, normally "rmmod", "apmd", or something similar.
	*
	* may be called without controller electrically present
	* may be called with controller, bus, and devices active
	*/
	void usb_hcd_msp_remove(struct usb_hcd hcd, struct platform_device dev)
	{
	usb_remove_hcd(hcd);
	iounmap(hcd->regs);
	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
	usb_put_hcd(hcd);
	}

	static const struct hc_driver ehci_msp_hc_driver = {
	.description = hcd_name,
	.product_desc = "PMC MSP EHCI",
	.hcd_priv_size = sizeof(struct ehci_hcd),

	/*
	* generic hardware linkage
	*/
	.irq = ehci_irq,
	.flags = HCD_MEMORY \| HCD_USB2 \| HCD_BH,

	/*
	* basic lifecycle operations
	*/
	.reset = ehci_msp_setup,
	.shutdown = ehci_shutdown,
	.start = ehci_run,
	.stop = ehci_stop,

	/*
	* managing i/o requests and associated device resources
	*/
	.urb_enqueue = ehci_urb_enqueue,
	.urb_dequeue = ehci_urb_dequeue,
	.endpoint_disable = ehci_endpoint_disable,
	.endpoint_reset = ehci_endpoint_reset,

	/*
	* scheduling support
	*/
	.get_frame_number = ehci_get_frame,

	/*
	* root hub support
	*/
	.hub_status_data = ehci_hub_status_data,
	.hub_control = ehci_hub_control,
	.bus_suspend = ehci_bus_suspend,
	.bus_resume = ehci_bus_resume,
	.relinquish_port = ehci_relinquish_port,
	.port_handed_over = ehci_port_handed_over,

	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
	};

	static int ehci_hcd_msp_drv_probe(struct platform_device *pdev)
	{
	int ret;

	pr_debug("In ehci_hcd_msp_drv_probe");

	if (usb_disabled())
	return -ENODEV;

	gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO");

	ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev);

	return ret;
	}

	static int ehci_hcd_msp_drv_remove(struct platform_device *pdev)
	{
	struct usb_hcd *hcd = platform_get_drvdata(pdev);

	usb_hcd_msp_remove(hcd, pdev);

	/* free TWI GPIO USB_HOST_DEV pin */
	gpio_free(MSP_PIN_USB0_HOST_DEV);

	return 0;
	}

	MODULE_ALIAS("pmcmsp-ehci");

	static struct platform_driver ehci_hcd_msp_driver = {
	.probe = ehci_hcd_msp_drv_probe,
	.remove = ehci_hcd_msp_drv_remove,
	.driver = {
	.name = "pmcmsp-ehci",
	},
	};