ARM: OMAP5 / DRA7: PM: Avoid all SAR saves
Get rid of all assumptions about always having a sar base on *all*
OMAP4+ platforms. We dont need one on DRA7 and it is not necessary at
this point for OMAP5 either.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
[nm@ti.com: Split and optimize]
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index fad6e8c..53d8de5 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -118,7 +118,8 @@
{
struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
- writel_relaxed(addr, pm_info->wkup_sar_addr);
+ if (pm_info->wkup_sar_addr)
+ writel_relaxed(addr, pm_info->wkup_sar_addr);
}
/*
@@ -143,7 +144,8 @@
break;
}
- writel_relaxed(scu_pwr_st, pm_info->scu_sar_addr);
+ if (pm_info->scu_sar_addr)
+ writel_relaxed(scu_pwr_st, pm_info->scu_sar_addr);
}
/* Helper functions for MPUSS OSWR */
@@ -181,7 +183,8 @@
{
struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
- writel_relaxed(save_state, pm_info->l2x0_sar_addr);
+ if (pm_info->l2x0_sar_addr)
+ writel_relaxed(save_state, pm_info->l2x0_sar_addr);
}
/*
@@ -191,10 +194,14 @@
#ifdef CONFIG_CACHE_L2X0
static void __init save_l2x0_context(void)
{
- writel_relaxed(l2x0_saved_regs.aux_ctrl,
- sar_base + L2X0_AUXCTRL_OFFSET);
- writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
- sar_base + L2X0_PREFETCH_CTRL_OFFSET);
+ void __iomem *l2x0_base = omap4_get_l2cache_base();
+
+ if (l2x0_base && sar_base) {
+ writel_relaxed(l2x0_saved_regs.aux_ctrl,
+ sar_base + L2X0_AUXCTRL_OFFSET);
+ writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
+ sar_base + L2X0_PREFETCH_CTRL_OFFSET);
+ }
}
#else
static void __init save_l2x0_context(void)
@@ -347,13 +354,17 @@
return -ENODEV;
}
- sar_base = omap4_get_sar_ram_base();
+ if (cpu_is_omap44xx())
+ sar_base = omap4_get_sar_ram_base();
/* Initilaise per CPU PM information */
pm_info = &per_cpu(omap4_pm_info, 0x0);
- pm_info->scu_sar_addr = sar_base + SCU_OFFSET0;
- pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
- pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0;
+ if (sar_base) {
+ pm_info->scu_sar_addr = sar_base + SCU_OFFSET0;
+ pm_info->wkup_sar_addr = sar_base +
+ CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
+ pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0;
+ }
pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm");
if (!pm_info->pwrdm) {
pr_err("Lookup failed for CPU0 pwrdm\n");
@@ -368,9 +379,12 @@
pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
pm_info = &per_cpu(omap4_pm_info, 0x1);
- pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
- pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
- pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
+ if (sar_base) {
+ pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
+ pm_info->wkup_sar_addr = sar_base +
+ CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+ pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
+ }
if (cpu_is_omap446x())
pm_info->secondary_startup = omap4460_secondary_startup;
else
@@ -397,13 +411,12 @@
pwrdm_clear_all_prev_pwrst(mpuss_pd);
mpuss_clear_prev_logic_pwrst();
- /* Save device type on scratchpad for low level code to use */
- if (omap_type() != OMAP2_DEVICE_TYPE_GP)
- writel_relaxed(1, sar_base + OMAP_TYPE_OFFSET);
- else
- writel_relaxed(0, sar_base + OMAP_TYPE_OFFSET);
-
- save_l2x0_context();
+ if (sar_base) {
+ /* Save device type on scratchpad for low level code to use */
+ writel_relaxed((omap_type() != OMAP2_DEVICE_TYPE_GP) ? 1 : 0,
+ sar_base + OMAP_TYPE_OFFSET);
+ save_l2x0_context();
+ }
if (cpu_is_omap44xx()) {
omap_pm_ops.finish_suspend = omap4_finish_suspend;