| /* |
| * Regulator Driver for Freescale MC13892 PMIC |
| * |
| * Copyright 2010 Yong Shen <yong.shen@linaro.org> |
| * |
| * Based on draft driver from Arnaud Patard <arnaud.patard@rtp-net.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/mfd/mc13892.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/platform_device.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include "mc13xxx.h" |
| |
| #define MC13892_REVISION 7 |
| |
| #define MC13892_POWERCTL0 13 |
| #define MC13892_POWERCTL0_USEROFFSPI 3 |
| #define MC13892_POWERCTL0_VCOINCELLVSEL 20 |
| #define MC13892_POWERCTL0_VCOINCELLVSEL_M (7<<20) |
| #define MC13892_POWERCTL0_VCOINCELLEN (1<<23) |
| |
| #define MC13892_SWITCHERS0_SWxHI (1<<23) |
| |
| #define MC13892_SWITCHERS0 24 |
| #define MC13892_SWITCHERS0_SW1VSEL 0 |
| #define MC13892_SWITCHERS0_SW1VSEL_M (0x1f<<0) |
| #define MC13892_SWITCHERS0_SW1HI (1<<23) |
| #define MC13892_SWITCHERS0_SW1EN 0 |
| |
| #define MC13892_SWITCHERS1 25 |
| #define MC13892_SWITCHERS1_SW2VSEL 0 |
| #define MC13892_SWITCHERS1_SW2VSEL_M (0x1f<<0) |
| #define MC13892_SWITCHERS1_SW2HI (1<<23) |
| #define MC13892_SWITCHERS1_SW2EN 0 |
| |
| #define MC13892_SWITCHERS2 26 |
| #define MC13892_SWITCHERS2_SW3VSEL 0 |
| #define MC13892_SWITCHERS2_SW3VSEL_M (0x1f<<0) |
| #define MC13892_SWITCHERS2_SW3HI (1<<23) |
| #define MC13892_SWITCHERS2_SW3EN 0 |
| |
| #define MC13892_SWITCHERS3 27 |
| #define MC13892_SWITCHERS3_SW4VSEL 0 |
| #define MC13892_SWITCHERS3_SW4VSEL_M (0x1f<<0) |
| #define MC13892_SWITCHERS3_SW4HI (1<<23) |
| #define MC13892_SWITCHERS3_SW4EN 0 |
| |
| #define MC13892_SWITCHERS4 28 |
| #define MC13892_SWITCHERS4_SW1MODE 0 |
| #define MC13892_SWITCHERS4_SW1MODE_AUTO (8<<0) |
| #define MC13892_SWITCHERS4_SW1MODE_M (0xf<<0) |
| #define MC13892_SWITCHERS4_SW2MODE 10 |
| #define MC13892_SWITCHERS4_SW2MODE_AUTO (8<<10) |
| #define MC13892_SWITCHERS4_SW2MODE_M (0xf<<10) |
| |
| #define MC13892_SWITCHERS5 29 |
| #define MC13892_SWITCHERS5_SW3MODE 0 |
| #define MC13892_SWITCHERS5_SW3MODE_AUTO (8<<0) |
| #define MC13892_SWITCHERS5_SW3MODE_M (0xf<<0) |
| #define MC13892_SWITCHERS5_SW4MODE 8 |
| #define MC13892_SWITCHERS5_SW4MODE_AUTO (8<<8) |
| #define MC13892_SWITCHERS5_SW4MODE_M (0xf<<8) |
| #define MC13892_SWITCHERS5_SWBSTEN (1<<20) |
| |
| #define MC13892_REGULATORSETTING0 30 |
| #define MC13892_REGULATORSETTING0_VGEN1VSEL 0 |
| #define MC13892_REGULATORSETTING0_VDIGVSEL 4 |
| #define MC13892_REGULATORSETTING0_VGEN2VSEL 6 |
| #define MC13892_REGULATORSETTING0_VPLLVSEL 9 |
| #define MC13892_REGULATORSETTING0_VUSB2VSEL 11 |
| #define MC13892_REGULATORSETTING0_VGEN3VSEL 14 |
| #define MC13892_REGULATORSETTING0_VCAMVSEL 16 |
| |
| #define MC13892_REGULATORSETTING0_VGEN1VSEL_M (3<<0) |
| #define MC13892_REGULATORSETTING0_VDIGVSEL_M (3<<4) |
| #define MC13892_REGULATORSETTING0_VGEN2VSEL_M (7<<6) |
| #define MC13892_REGULATORSETTING0_VPLLVSEL_M (3<<9) |
| #define MC13892_REGULATORSETTING0_VUSB2VSEL_M (3<<11) |
| #define MC13892_REGULATORSETTING0_VGEN3VSEL_M (1<<14) |
| #define MC13892_REGULATORSETTING0_VCAMVSEL_M (3<<16) |
| |
| #define MC13892_REGULATORSETTING1 31 |
| #define MC13892_REGULATORSETTING1_VVIDEOVSEL 2 |
| #define MC13892_REGULATORSETTING1_VAUDIOVSEL 4 |
| #define MC13892_REGULATORSETTING1_VSDVSEL 6 |
| |
| #define MC13892_REGULATORSETTING1_VVIDEOVSEL_M (3<<2) |
| #define MC13892_REGULATORSETTING1_VAUDIOVSEL_M (3<<4) |
| #define MC13892_REGULATORSETTING1_VSDVSEL_M (7<<6) |
| |
| #define MC13892_REGULATORMODE0 32 |
| #define MC13892_REGULATORMODE0_VGEN1EN (1<<0) |
| #define MC13892_REGULATORMODE0_VGEN1STDBY (1<<1) |
| #define MC13892_REGULATORMODE0_VGEN1MODE (1<<2) |
| #define MC13892_REGULATORMODE0_VIOHIEN (1<<3) |
| #define MC13892_REGULATORMODE0_VIOHISTDBY (1<<4) |
| #define MC13892_REGULATORMODE0_VIOHIMODE (1<<5) |
| #define MC13892_REGULATORMODE0_VDIGEN (1<<9) |
| #define MC13892_REGULATORMODE0_VDIGSTDBY (1<<10) |
| #define MC13892_REGULATORMODE0_VDIGMODE (1<<11) |
| #define MC13892_REGULATORMODE0_VGEN2EN (1<<12) |
| #define MC13892_REGULATORMODE0_VGEN2STDBY (1<<13) |
| #define MC13892_REGULATORMODE0_VGEN2MODE (1<<14) |
| #define MC13892_REGULATORMODE0_VPLLEN (1<<15) |
| #define MC13892_REGULATORMODE0_VPLLSTDBY (1<<16) |
| #define MC13892_REGULATORMODE0_VPLLMODE (1<<17) |
| #define MC13892_REGULATORMODE0_VUSB2EN (1<<18) |
| #define MC13892_REGULATORMODE0_VUSB2STDBY (1<<19) |
| #define MC13892_REGULATORMODE0_VUSB2MODE (1<<20) |
| |
| #define MC13892_REGULATORMODE1 33 |
| #define MC13892_REGULATORMODE1_VGEN3EN (1<<0) |
| #define MC13892_REGULATORMODE1_VGEN3STDBY (1<<1) |
| #define MC13892_REGULATORMODE1_VGEN3MODE (1<<2) |
| #define MC13892_REGULATORMODE1_VCAMEN (1<<6) |
| #define MC13892_REGULATORMODE1_VCAMSTDBY (1<<7) |
| #define MC13892_REGULATORMODE1_VCAMMODE (1<<8) |
| #define MC13892_REGULATORMODE1_VCAMCONFIGEN (1<<9) |
| #define MC13892_REGULATORMODE1_VVIDEOEN (1<<12) |
| #define MC13892_REGULATORMODE1_VVIDEOSTDBY (1<<13) |
| #define MC13892_REGULATORMODE1_VVIDEOMODE (1<<14) |
| #define MC13892_REGULATORMODE1_VAUDIOEN (1<<15) |
| #define MC13892_REGULATORMODE1_VAUDIOSTDBY (1<<16) |
| #define MC13892_REGULATORMODE1_VAUDIOMODE (1<<17) |
| #define MC13892_REGULATORMODE1_VSDEN (1<<18) |
| #define MC13892_REGULATORMODE1_VSDSTDBY (1<<19) |
| #define MC13892_REGULATORMODE1_VSDMODE (1<<20) |
| |
| #define MC13892_POWERMISC 34 |
| #define MC13892_POWERMISC_GPO1EN (1<<6) |
| #define MC13892_POWERMISC_GPO2EN (1<<8) |
| #define MC13892_POWERMISC_GPO3EN (1<<10) |
| #define MC13892_POWERMISC_GPO4EN (1<<12) |
| #define MC13892_POWERMISC_PWGT1SPIEN (1<<15) |
| #define MC13892_POWERMISC_PWGT2SPIEN (1<<16) |
| #define MC13892_POWERMISC_GPO4ADINEN (1<<21) |
| |
| #define MC13892_POWERMISC_PWGTSPI_M (3 << 15) |
| |
| #define MC13892_USB1 50 |
| #define MC13892_USB1_VUSBEN (1<<3) |
| |
| static const unsigned int mc13892_vcoincell[] = { |
| 2500000, 2700000, 2800000, 2900000, 3000000, 3100000, |
| 3200000, 3300000, |
| }; |
| |
| static const unsigned int mc13892_sw1[] = { |
| 600000, 625000, 650000, 675000, 700000, 725000, |
| 750000, 775000, 800000, 825000, 850000, 875000, |
| 900000, 925000, 950000, 975000, 1000000, 1025000, |
| 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, |
| 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, |
| 1350000, 1375000 |
| }; |
| |
| /* |
| * Note: this table is used to derive SWxVSEL by index into |
| * the array. Offset the values by the index of 1100000uV |
| * to get the actual register value for that voltage selector |
| * if the HI bit is to be set as well. |
| */ |
| #define MC13892_SWxHI_SEL_OFFSET 20 |
| |
| static const unsigned int mc13892_sw[] = { |
| 600000, 625000, 650000, 675000, 700000, 725000, |
| 750000, 775000, 800000, 825000, 850000, 875000, |
| 900000, 925000, 950000, 975000, 1000000, 1025000, |
| 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, |
| 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, |
| 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, |
| 1500000, 1525000, 1550000, 1575000, 1600000, 1625000, |
| 1650000, 1675000, 1700000, 1725000, 1750000, 1775000, |
| 1800000, 1825000, 1850000, 1875000 |
| }; |
| |
| static const unsigned int mc13892_swbst[] = { |
| 5000000, |
| }; |
| |
| static const unsigned int mc13892_viohi[] = { |
| 2775000, |
| }; |
| |
| static const unsigned int mc13892_vpll[] = { |
| 1050000, 1250000, 1650000, 1800000, |
| }; |
| |
| static const unsigned int mc13892_vdig[] = { |
| 1050000, 1250000, 1650000, 1800000, |
| }; |
| |
| static const unsigned int mc13892_vsd[] = { |
| 1800000, 2000000, 2600000, 2700000, |
| 2800000, 2900000, 3000000, 3150000, |
| }; |
| |
| static const unsigned int mc13892_vusb2[] = { |
| 2400000, 2600000, 2700000, 2775000, |
| }; |
| |
| static const unsigned int mc13892_vvideo[] = { |
| 2700000, 2775000, 2500000, 2600000, |
| }; |
| |
| static const unsigned int mc13892_vaudio[] = { |
| 2300000, 2500000, 2775000, 3000000, |
| }; |
| |
| static const unsigned int mc13892_vcam[] = { |
| 2500000, 2600000, 2750000, 3000000, |
| }; |
| |
| static const unsigned int mc13892_vgen1[] = { |
| 1200000, 1500000, 2775000, 3150000, |
| }; |
| |
| static const unsigned int mc13892_vgen2[] = { |
| 1200000, 1500000, 1600000, 1800000, |
| 2700000, 2800000, 3000000, 3150000, |
| }; |
| |
| static const unsigned int mc13892_vgen3[] = { |
| 1800000, 2900000, |
| }; |
| |
| static const unsigned int mc13892_vusb[] = { |
| 3300000, |
| }; |
| |
| static const unsigned int mc13892_gpo[] = { |
| 2750000, |
| }; |
| |
| static const unsigned int mc13892_pwgtdrv[] = { |
| 5000000, |
| }; |
| |
| static struct regulator_ops mc13892_gpo_regulator_ops; |
| static struct regulator_ops mc13892_sw_regulator_ops; |
| |
| |
| #define MC13892_FIXED_DEFINE(name, reg, voltages) \ |
| MC13xxx_FIXED_DEFINE(MC13892_, name, reg, voltages, \ |
| mc13xxx_fixed_regulator_ops) |
| |
| #define MC13892_GPO_DEFINE(name, reg, voltages) \ |
| MC13xxx_GPO_DEFINE(MC13892_, name, reg, voltages, \ |
| mc13892_gpo_regulator_ops) |
| |
| #define MC13892_SW_DEFINE(name, reg, vsel_reg, voltages) \ |
| MC13xxx_DEFINE(MC13892_, name, reg, vsel_reg, voltages, \ |
| mc13892_sw_regulator_ops) |
| |
| #define MC13892_DEFINE_REGU(name, reg, vsel_reg, voltages) \ |
| MC13xxx_DEFINE(MC13892_, name, reg, vsel_reg, voltages, \ |
| mc13xxx_regulator_ops) |
| |
| static struct mc13xxx_regulator mc13892_regulators[] = { |
| MC13892_DEFINE_REGU(VCOINCELL, POWERCTL0, POWERCTL0, mc13892_vcoincell), |
| MC13892_SW_DEFINE(SW1, SWITCHERS0, SWITCHERS0, mc13892_sw1), |
| MC13892_SW_DEFINE(SW2, SWITCHERS1, SWITCHERS1, mc13892_sw), |
| MC13892_SW_DEFINE(SW3, SWITCHERS2, SWITCHERS2, mc13892_sw), |
| MC13892_SW_DEFINE(SW4, SWITCHERS3, SWITCHERS3, mc13892_sw), |
| MC13892_FIXED_DEFINE(SWBST, SWITCHERS5, mc13892_swbst), |
| MC13892_FIXED_DEFINE(VIOHI, REGULATORMODE0, mc13892_viohi), |
| MC13892_DEFINE_REGU(VPLL, REGULATORMODE0, REGULATORSETTING0, \ |
| mc13892_vpll), |
| MC13892_DEFINE_REGU(VDIG, REGULATORMODE0, REGULATORSETTING0, \ |
| mc13892_vdig), |
| MC13892_DEFINE_REGU(VSD, REGULATORMODE1, REGULATORSETTING1, \ |
| mc13892_vsd), |
| MC13892_DEFINE_REGU(VUSB2, REGULATORMODE0, REGULATORSETTING0, \ |
| mc13892_vusb2), |
| MC13892_DEFINE_REGU(VVIDEO, REGULATORMODE1, REGULATORSETTING1, \ |
| mc13892_vvideo), |
| MC13892_DEFINE_REGU(VAUDIO, REGULATORMODE1, REGULATORSETTING1, \ |
| mc13892_vaudio), |
| MC13892_DEFINE_REGU(VCAM, REGULATORMODE1, REGULATORSETTING0, \ |
| mc13892_vcam), |
| MC13892_DEFINE_REGU(VGEN1, REGULATORMODE0, REGULATORSETTING0, \ |
| mc13892_vgen1), |
| MC13892_DEFINE_REGU(VGEN2, REGULATORMODE0, REGULATORSETTING0, \ |
| mc13892_vgen2), |
| MC13892_DEFINE_REGU(VGEN3, REGULATORMODE1, REGULATORSETTING0, \ |
| mc13892_vgen3), |
| MC13892_FIXED_DEFINE(VUSB, USB1, mc13892_vusb), |
| MC13892_GPO_DEFINE(GPO1, POWERMISC, mc13892_gpo), |
| MC13892_GPO_DEFINE(GPO2, POWERMISC, mc13892_gpo), |
| MC13892_GPO_DEFINE(GPO3, POWERMISC, mc13892_gpo), |
| MC13892_GPO_DEFINE(GPO4, POWERMISC, mc13892_gpo), |
| MC13892_GPO_DEFINE(PWGT1SPI, POWERMISC, mc13892_pwgtdrv), |
| MC13892_GPO_DEFINE(PWGT2SPI, POWERMISC, mc13892_pwgtdrv), |
| }; |
| |
| static int mc13892_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask, |
| u32 val) |
| { |
| struct mc13xxx *mc13892 = priv->mc13xxx; |
| int ret; |
| u32 valread; |
| |
| BUG_ON(val & ~mask); |
| |
| mc13xxx_lock(priv->mc13xxx); |
| ret = mc13xxx_reg_read(mc13892, MC13892_POWERMISC, &valread); |
| if (ret) |
| goto out; |
| |
| /* Update the stored state for Power Gates. */ |
| priv->powermisc_pwgt_state = |
| (priv->powermisc_pwgt_state & ~mask) | val; |
| priv->powermisc_pwgt_state &= MC13892_POWERMISC_PWGTSPI_M; |
| |
| /* Construct the new register value */ |
| valread = (valread & ~mask) | val; |
| /* Overwrite the PWGTxEN with the stored version */ |
| valread = (valread & ~MC13892_POWERMISC_PWGTSPI_M) | |
| priv->powermisc_pwgt_state; |
| |
| ret = mc13xxx_reg_write(mc13892, MC13892_POWERMISC, valread); |
| out: |
| mc13xxx_unlock(priv->mc13xxx); |
| return ret; |
| } |
| |
| static int mc13892_gpo_regulator_enable(struct regulator_dev *rdev) |
| { |
| struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); |
| int id = rdev_get_id(rdev); |
| u32 en_val = mc13892_regulators[id].enable_bit; |
| u32 mask = mc13892_regulators[id].enable_bit; |
| |
| dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); |
| |
| /* Power Gate enable value is 0 */ |
| if (id == MC13892_PWGT1SPI || id == MC13892_PWGT2SPI) |
| en_val = 0; |
| |
| if (id == MC13892_GPO4) |
| mask |= MC13892_POWERMISC_GPO4ADINEN; |
| |
| return mc13892_powermisc_rmw(priv, mask, en_val); |
| } |
| |
| static int mc13892_gpo_regulator_disable(struct regulator_dev *rdev) |
| { |
| struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); |
| int id = rdev_get_id(rdev); |
| u32 dis_val = 0; |
| |
| dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); |
| |
| /* Power Gate disable value is 1 */ |
| if (id == MC13892_PWGT1SPI || id == MC13892_PWGT2SPI) |
| dis_val = mc13892_regulators[id].enable_bit; |
| |
| return mc13892_powermisc_rmw(priv, mc13892_regulators[id].enable_bit, |
| dis_val); |
| } |
| |
| static int mc13892_gpo_regulator_is_enabled(struct regulator_dev *rdev) |
| { |
| struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); |
| int ret, id = rdev_get_id(rdev); |
| unsigned int val; |
| |
| mc13xxx_lock(priv->mc13xxx); |
| ret = mc13xxx_reg_read(priv->mc13xxx, mc13892_regulators[id].reg, &val); |
| mc13xxx_unlock(priv->mc13xxx); |
| |
| if (ret) |
| return ret; |
| |
| /* Power Gates state is stored in powermisc_pwgt_state |
| * where the meaning of bits is negated */ |
| val = (val & ~MC13892_POWERMISC_PWGTSPI_M) | |
| (priv->powermisc_pwgt_state ^ MC13892_POWERMISC_PWGTSPI_M); |
| |
| return (val & mc13892_regulators[id].enable_bit) != 0; |
| } |
| |
| |
| static struct regulator_ops mc13892_gpo_regulator_ops = { |
| .enable = mc13892_gpo_regulator_enable, |
| .disable = mc13892_gpo_regulator_disable, |
| .is_enabled = mc13892_gpo_regulator_is_enabled, |
| .list_voltage = regulator_list_voltage_table, |
| .set_voltage = mc13xxx_fixed_regulator_set_voltage, |
| }; |
| |
| static int mc13892_sw_regulator_get_voltage_sel(struct regulator_dev *rdev) |
| { |
| struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); |
| int ret, id = rdev_get_id(rdev); |
| unsigned int val, selector; |
| |
| dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); |
| |
| mc13xxx_lock(priv->mc13xxx); |
| ret = mc13xxx_reg_read(priv->mc13xxx, |
| mc13892_regulators[id].vsel_reg, &val); |
| mc13xxx_unlock(priv->mc13xxx); |
| if (ret) |
| return ret; |
| |
| /* |
| * Figure out if the HI bit is set inside the switcher mode register |
| * since this means the selector value we return is at a different |
| * offset into the selector table. |
| * |
| * According to the MC13892 documentation note 59 (Table 47) the SW1 |
| * buck switcher does not support output range programming therefore |
| * the HI bit must always remain 0. So do not do anything strange if |
| * our register is MC13892_SWITCHERS0. |
| */ |
| |
| selector = val & mc13892_regulators[id].vsel_mask; |
| |
| if ((mc13892_regulators[id].vsel_reg != MC13892_SWITCHERS0) && |
| (val & MC13892_SWITCHERS0_SWxHI)) { |
| selector += MC13892_SWxHI_SEL_OFFSET; |
| } |
| |
| dev_dbg(rdev_get_dev(rdev), "%s id: %d val: 0x%08x selector: %d\n", |
| __func__, id, val, selector); |
| |
| return selector; |
| } |
| |
| static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev, |
| unsigned selector) |
| { |
| struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); |
| int volt, mask, id = rdev_get_id(rdev); |
| u32 reg_value; |
| int ret; |
| |
| volt = rdev->desc->volt_table[selector]; |
| mask = mc13892_regulators[id].vsel_mask; |
| reg_value = selector; |
| |
| /* |
| * Don't mess with the HI bit or support HI voltage offsets for SW1. |
| * |
| * Since the get_voltage_sel callback has given a fudged value for |
| * the selector offset, we need to back out that offset if HI is |
| * to be set so we write the correct value to the register. |
| * |
| * The HI bit addition and selector offset handling COULD be more |
| * complicated by shifting and masking off the voltage selector part |
| * of the register then logical OR it back in, but since the selector |
| * is at bits 4:0 there is very little point. This makes the whole |
| * thing more readable and we do far less work. |
| */ |
| |
| if (mc13892_regulators[id].vsel_reg != MC13892_SWITCHERS0) { |
| mask |= MC13892_SWITCHERS0_SWxHI; |
| |
| if (volt > 1375000) { |
| reg_value -= MC13892_SWxHI_SEL_OFFSET; |
| reg_value |= MC13892_SWITCHERS0_SWxHI; |
| } else { |
| reg_value &= ~MC13892_SWITCHERS0_SWxHI; |
| } |
| } |
| |
| mc13xxx_lock(priv->mc13xxx); |
| ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].vsel_reg, mask, |
| reg_value); |
| mc13xxx_unlock(priv->mc13xxx); |
| |
| return ret; |
| } |
| |
| static struct regulator_ops mc13892_sw_regulator_ops = { |
| .list_voltage = regulator_list_voltage_table, |
| .map_voltage = regulator_map_voltage_ascend, |
| .set_voltage_sel = mc13892_sw_regulator_set_voltage_sel, |
| .get_voltage_sel = mc13892_sw_regulator_get_voltage_sel, |
| }; |
| |
| static int mc13892_vcam_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| { |
| unsigned int en_val = 0; |
| struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); |
| int ret, id = rdev_get_id(rdev); |
| |
| if (mode == REGULATOR_MODE_FAST) |
| en_val = MC13892_REGULATORMODE1_VCAMCONFIGEN; |
| |
| mc13xxx_lock(priv->mc13xxx); |
| ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].reg, |
| MC13892_REGULATORMODE1_VCAMCONFIGEN, en_val); |
| mc13xxx_unlock(priv->mc13xxx); |
| |
| return ret; |
| } |
| |
| static unsigned int mc13892_vcam_get_mode(struct regulator_dev *rdev) |
| { |
| struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); |
| int ret, id = rdev_get_id(rdev); |
| unsigned int val; |
| |
| mc13xxx_lock(priv->mc13xxx); |
| ret = mc13xxx_reg_read(priv->mc13xxx, mc13892_regulators[id].reg, &val); |
| mc13xxx_unlock(priv->mc13xxx); |
| |
| if (ret) |
| return ret; |
| |
| if (val & MC13892_REGULATORMODE1_VCAMCONFIGEN) |
| return REGULATOR_MODE_FAST; |
| |
| return REGULATOR_MODE_NORMAL; |
| } |
| |
| |
| static int mc13892_regulator_probe(struct platform_device *pdev) |
| { |
| struct mc13xxx_regulator_priv *priv; |
| struct mc13xxx *mc13892 = dev_get_drvdata(pdev->dev.parent); |
| struct mc13xxx_regulator_platform_data *pdata = |
| dev_get_platdata(&pdev->dev); |
| struct mc13xxx_regulator_init_data *mc13xxx_data; |
| struct regulator_config config = { }; |
| int i, ret; |
| int num_regulators = 0; |
| u32 val; |
| |
| num_regulators = mc13xxx_get_num_regulators_dt(pdev); |
| |
| if (num_regulators <= 0 && pdata) |
| num_regulators = pdata->num_regulators; |
| if (num_regulators <= 0) |
| return -EINVAL; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv) + |
| num_regulators * sizeof(priv->regulators[0]), |
| GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->num_regulators = num_regulators; |
| priv->mc13xxx_regulators = mc13892_regulators; |
| priv->mc13xxx = mc13892; |
| platform_set_drvdata(pdev, priv); |
| |
| mc13xxx_lock(mc13892); |
| ret = mc13xxx_reg_read(mc13892, MC13892_REVISION, &val); |
| if (ret) |
| goto err_unlock; |
| |
| /* enable switch auto mode (on 2.0A silicon only) */ |
| if ((val & 0x0000FFFF) == 0x45d0) { |
| ret = mc13xxx_reg_rmw(mc13892, MC13892_SWITCHERS4, |
| MC13892_SWITCHERS4_SW1MODE_M | |
| MC13892_SWITCHERS4_SW2MODE_M, |
| MC13892_SWITCHERS4_SW1MODE_AUTO | |
| MC13892_SWITCHERS4_SW2MODE_AUTO); |
| if (ret) |
| goto err_unlock; |
| |
| ret = mc13xxx_reg_rmw(mc13892, MC13892_SWITCHERS5, |
| MC13892_SWITCHERS5_SW3MODE_M | |
| MC13892_SWITCHERS5_SW4MODE_M, |
| MC13892_SWITCHERS5_SW3MODE_AUTO | |
| MC13892_SWITCHERS5_SW4MODE_AUTO); |
| if (ret) |
| goto err_unlock; |
| } |
| mc13xxx_unlock(mc13892); |
| |
| mc13892_regulators[MC13892_VCAM].desc.ops->set_mode |
| = mc13892_vcam_set_mode; |
| mc13892_regulators[MC13892_VCAM].desc.ops->get_mode |
| = mc13892_vcam_get_mode; |
| |
| mc13xxx_data = mc13xxx_parse_regulators_dt(pdev, mc13892_regulators, |
| ARRAY_SIZE(mc13892_regulators)); |
| |
| for (i = 0; i < priv->num_regulators; i++) { |
| struct regulator_init_data *init_data; |
| struct regulator_desc *desc; |
| struct device_node *node = NULL; |
| int id; |
| |
| if (mc13xxx_data) { |
| id = mc13xxx_data[i].id; |
| init_data = mc13xxx_data[i].init_data; |
| node = mc13xxx_data[i].node; |
| } else { |
| id = pdata->regulators[i].id; |
| init_data = pdata->regulators[i].init_data; |
| } |
| desc = &mc13892_regulators[id].desc; |
| |
| config.dev = &pdev->dev; |
| config.init_data = init_data; |
| config.driver_data = priv; |
| config.of_node = node; |
| |
| priv->regulators[i] = regulator_register(desc, &config); |
| if (IS_ERR(priv->regulators[i])) { |
| dev_err(&pdev->dev, "failed to register regulator %s\n", |
| mc13892_regulators[i].desc.name); |
| ret = PTR_ERR(priv->regulators[i]); |
| goto err; |
| } |
| } |
| |
| return 0; |
| err: |
| while (--i >= 0) |
| regulator_unregister(priv->regulators[i]); |
| return ret; |
| |
| err_unlock: |
| mc13xxx_unlock(mc13892); |
| return ret; |
| } |
| |
| static int mc13892_regulator_remove(struct platform_device *pdev) |
| { |
| struct mc13xxx_regulator_priv *priv = platform_get_drvdata(pdev); |
| int i; |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| for (i = 0; i < priv->num_regulators; i++) |
| regulator_unregister(priv->regulators[i]); |
| |
| return 0; |
| } |
| |
| static struct platform_driver mc13892_regulator_driver = { |
| .driver = { |
| .name = "mc13892-regulator", |
| .owner = THIS_MODULE, |
| }, |
| .remove = mc13892_regulator_remove, |
| .probe = mc13892_regulator_probe, |
| }; |
| |
| static int __init mc13892_regulator_init(void) |
| { |
| return platform_driver_register(&mc13892_regulator_driver); |
| } |
| subsys_initcall(mc13892_regulator_init); |
| |
| static void __exit mc13892_regulator_exit(void) |
| { |
| platform_driver_unregister(&mc13892_regulator_driver); |
| } |
| module_exit(mc13892_regulator_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Yong Shen <yong.shen@linaro.org>"); |
| MODULE_DESCRIPTION("Regulator Driver for Freescale MC13892 PMIC"); |
| MODULE_ALIAS("platform:mc13892-regulator"); |