| #include <dt-bindings/gpio/tegra-gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| #include "skeleton.dtsi" |
| |
| / { |
| compatible = "nvidia,tegra124"; |
| interrupt-parent = <&gic>; |
| |
| gic: interrupt-controller@50041000 { |
| compatible = "arm,cortex-a15-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x50041000 0x1000>, |
| <0x50042000 0x1000>, |
| <0x50044000 0x2000>, |
| <0x50046000 0x2000>; |
| interrupts = <GIC_PPI 9 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| timer@60005000 { |
| compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer"; |
| reg = <0x60005000 0x400>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpio: gpio@6000d000 { |
| compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; |
| reg = <0x6000d000 0x1000>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| }; |
| |
| /* |
| * There are two serial driver i.e. 8250 based simple serial |
| * driver and APB DMA based serial driver for higher baudrate |
| * and performace. To enable the 8250 based driver, the compatible |
| * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable |
| * the APB DMA based serial driver, the comptible is |
| * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart". |
| */ |
| serial@70006000 { |
| compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; |
| reg = <0x70006000 0x40>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| serial@70006040 { |
| compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; |
| reg = <0x70006040 0x40>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| serial@70006200 { |
| compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; |
| reg = <0x70006200 0x40>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| serial@70006300 { |
| compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; |
| reg = <0x70006300 0x40>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| serial@70006400 { |
| compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; |
| reg = <0x70006400 0x40>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| rtc@7000e000 { |
| compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc"; |
| reg = <0x7000e000 0x100>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pmc@7000e400 { |
| compatible = "nvidia,tegra124-pmc"; |
| reg = <0x7000e400 0x400>; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <1>; |
| }; |
| |
| cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <2>; |
| }; |
| |
| cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <3>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| }; |