| /* |
| * Copyright (C) 2013 STMicroelectronics (R&D) Limited. |
| * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * publishhed by the Free Software Foundation. |
| */ |
| #include "stih41x.dtsi" |
| #include "stih415-clock.dtsi" |
| #include "stih415-pinctrl.dtsi" |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/reset-controller/stih415-resets.h> |
| / { |
| |
| L2: cache-controller { |
| compatible = "arm,pl310-cache"; |
| reg = <0xfffe2000 0x1000>; |
| arm,data-latency = <3 2 2>; |
| arm,tag-latency = <1 1 1>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&intc>; |
| ranges; |
| compatible = "simple-bus"; |
| |
| powerdown: powerdown-controller { |
| #reset-cells = <1>; |
| compatible = "st,stih415-powerdown"; |
| }; |
| |
| softreset: softreset-controller { |
| #reset-cells = <1>; |
| compatible = "st,stih415-softreset"; |
| }; |
| |
| syscfg_sbc: sbc-syscfg@fe600000{ |
| compatible = "st,stih415-sbc-syscfg", "syscon"; |
| reg = <0xfe600000 0xb4>; |
| }; |
| |
| syscfg_front: front-syscfg@fee10000{ |
| compatible = "st,stih415-front-syscfg", "syscon"; |
| reg = <0xfee10000 0x194>; |
| }; |
| |
| syscfg_rear: rear-syscfg@fe830000{ |
| compatible = "st,stih415-rear-syscfg", "syscon"; |
| reg = <0xfe830000 0x190>; |
| }; |
| |
| /* MPE syscfgs */ |
| syscfg_left: left-syscfg@fd690000{ |
| compatible = "st,stih415-left-syscfg", "syscon"; |
| reg = <0xfd690000 0x78>; |
| }; |
| |
| syscfg_right: right-syscfg@fd320000{ |
| compatible = "st,stih415-right-syscfg", "syscon"; |
| reg = <0xfd320000 0x180>; |
| }; |
| |
| syscfg_system: system-syscfg@fdde0000 { |
| compatible = "st,stih415-system-syscfg", "syscon"; |
| reg = <0xfdde0000 0x15c>; |
| }; |
| |
| syscfg_lpm: lpm-syscfg@fe4b5100{ |
| compatible = "st,stih415-lpm-syscfg", "syscon"; |
| reg = <0xfe4b5100 0x08>; |
| }; |
| |
| serial2: serial@fed32000 { |
| compatible = "st,asc"; |
| status = "disabled"; |
| reg = <0xfed32000 0x2c>; |
| interrupts = <0 197 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_serial2>; |
| clocks = <&clk_s_a0_ls CLK_ICN_REG>; |
| }; |
| |
| /* SBC comms block ASCs in SASG1 */ |
| sbc_serial1: serial@fe531000 { |
| compatible = "st,asc"; |
| status = "disabled"; |
| reg = <0xfe531000 0x2c>; |
| interrupts = <0 210 0>; |
| clocks = <&clk_sysin>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sbc_serial1>; |
| }; |
| |
| i2c@fed40000 { |
| compatible = "st,comms-ssc4-i2c"; |
| reg = <0xfed40000 0x110>; |
| interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_s_a0_ls CLK_ICN_REG>; |
| clock-names = "ssc"; |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c0_default>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c@fed41000 { |
| compatible = "st,comms-ssc4-i2c"; |
| reg = <0xfed41000 0x110>; |
| interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_s_a0_ls CLK_ICN_REG>; |
| clock-names = "ssc"; |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1_default>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c@fe540000 { |
| compatible = "st,comms-ssc4-i2c"; |
| reg = <0xfe540000 0x110>; |
| interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_sysin>; |
| clock-names = "ssc"; |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sbc_i2c0_default>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c@fe541000 { |
| compatible = "st,comms-ssc4-i2c"; |
| reg = <0xfe541000 0x110>; |
| interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_sysin>; |
| clock-names = "ssc"; |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sbc_i2c1_default>; |
| |
| status = "disabled"; |
| }; |
| |
| ethernet0: dwmac@fe810000 { |
| device_type = "network"; |
| compatible = "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610"; |
| status = "disabled"; |
| |
| reg = <0xfe810000 0x8000>, <0x148 0x4>; |
| reg-names = "stmmaceth", "sti-ethconf"; |
| |
| interrupts = <0 147 0>, <0 148 0>, <0 149 0>; |
| interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; |
| resets = <&softreset STIH415_ETH0_SOFTRESET>; |
| reset-names = "stmmaceth"; |
| |
| snps,pbl = <32>; |
| snps,mixed-burst; |
| snps,force_sf_dma_mode; |
| |
| st,syscon = <&syscfg_rear>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mii0>; |
| clock-names = "stmmaceth", "sti-ethclk"; |
| clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>; |
| }; |
| |
| ethernet1: dwmac@fef08000 { |
| device_type = "network"; |
| compatible = "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610"; |
| status = "disabled"; |
| reg = <0xfef08000 0x8000>, <0x74 0x4>; |
| reg-names = "stmmaceth", "sti-ethconf"; |
| interrupts = <0 150 0>, <0 151 0>, <0 152 0>; |
| interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; |
| |
| snps,pbl = <32>; |
| snps,mixed-burst; |
| snps,force_sf_dma_mode; |
| |
| st,syscon = <&syscfg_sbc>; |
| |
| resets = <&softreset STIH415_ETH1_SOFTRESET>; |
| reset-names = "stmmaceth"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mii1>; |
| clock-names = "stmmaceth", "sti-ethclk"; |
| clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>; |
| }; |
| |
| rc: rc@fe518000 { |
| compatible = "st,comms-irb"; |
| reg = <0xfe518000 0x234>; |
| interrupts = <0 203 0>; |
| clocks = <&clk_sysin>; |
| rx-mode = "infrared"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ir>; |
| resets = <&softreset STIH415_IRB_SOFTRESET>; |
| }; |
| |
| keyscan: keyscan@fe4b0000 { |
| compatible = "st,sti-keyscan"; |
| status = "disabled"; |
| reg = <0xfe4b0000 0x2000>; |
| interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; |
| clocks = <&clk_sysin>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_keyscan>; |
| resets = <&powerdown STIH415_KEYSCAN_POWERDOWN>, |
| <&softreset STIH415_KEYSCAN_SOFTRESET>; |
| }; |
| }; |
| }; |