| /* |
| * arch/ppc/syslib/mpc52xx_pci.c |
| * |
| * PCI code for the Freescale MPC52xx embedded CPU. |
| * |
| * |
| * Maintainer : Sylvain Munaut <tnt@246tNt.com> |
| * |
| * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com> |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include <linux/config.h> |
| |
| #include <asm/pci.h> |
| |
| #include <asm/mpc52xx.h> |
| #include "mpc52xx_pci.h" |
| |
| #include <asm/delay.h> |
| #include <asm/machdep.h> |
| |
| |
| static int |
| mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 *val) |
| { |
| struct pci_controller *hose = bus->sysdata; |
| u32 value; |
| |
| if (ppc_md.pci_exclude_device) |
| if (ppc_md.pci_exclude_device(bus->number, devfn)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| out_be32(hose->cfg_addr, |
| (1 << 31) | |
| ((bus->number - hose->bus_offset) << 16) | |
| (devfn << 8) | |
| (offset & 0xfc)); |
| |
| value = in_le32(hose->cfg_data); |
| |
| if (len != 4) { |
| value >>= ((offset & 0x3) << 3); |
| value &= 0xffffffff >> (32 - (len << 3)); |
| } |
| |
| *val = value; |
| |
| out_be32(hose->cfg_addr, 0); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int |
| mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 val) |
| { |
| struct pci_controller *hose = bus->sysdata; |
| u32 value, mask; |
| |
| if (ppc_md.pci_exclude_device) |
| if (ppc_md.pci_exclude_device(bus->number, devfn)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| out_be32(hose->cfg_addr, |
| (1 << 31) | |
| ((bus->number - hose->bus_offset) << 16) | |
| (devfn << 8) | |
| (offset & 0xfc)); |
| |
| if (len != 4) { |
| value = in_le32(hose->cfg_data); |
| |
| offset = (offset & 0x3) << 3; |
| mask = (0xffffffff >> (32 - (len << 3))); |
| mask <<= offset; |
| |
| value &= ~mask; |
| val = value | ((val << offset) & mask); |
| } |
| |
| out_le32(hose->cfg_data, val); |
| |
| out_be32(hose->cfg_addr, 0); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops mpc52xx_pci_ops = { |
| .read = mpc52xx_pci_read_config, |
| .write = mpc52xx_pci_write_config |
| }; |
| |
| |
| static void __init |
| mpc52xx_pci_setup(struct mpc52xx_pci __iomem *pci_regs) |
| { |
| |
| /* Setup control regs */ |
| /* Nothing to do afaik */ |
| |
| /* Setup windows */ |
| out_be32(&pci_regs->iw0btar, MPC52xx_PCI_IWBTAR_TRANSLATION( |
| MPC52xx_PCI_MEM_START + MPC52xx_PCI_MEM_OFFSET, |
| MPC52xx_PCI_MEM_START, |
| MPC52xx_PCI_MEM_SIZE )); |
| |
| out_be32(&pci_regs->iw1btar, MPC52xx_PCI_IWBTAR_TRANSLATION( |
| MPC52xx_PCI_MMIO_START + MPC52xx_PCI_MEM_OFFSET, |
| MPC52xx_PCI_MMIO_START, |
| MPC52xx_PCI_MMIO_SIZE )); |
| |
| out_be32(&pci_regs->iw2btar, MPC52xx_PCI_IWBTAR_TRANSLATION( |
| MPC52xx_PCI_IO_BASE, |
| MPC52xx_PCI_IO_START, |
| MPC52xx_PCI_IO_SIZE )); |
| |
| out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK( |
| ( MPC52xx_PCI_IWCR_ENABLE | /* iw0btar */ |
| MPC52xx_PCI_IWCR_READ_MULTI | |
| MPC52xx_PCI_IWCR_MEM ), |
| ( MPC52xx_PCI_IWCR_ENABLE | /* iw1btar */ |
| MPC52xx_PCI_IWCR_READ | |
| MPC52xx_PCI_IWCR_MEM ), |
| ( MPC52xx_PCI_IWCR_ENABLE | /* iw2btar */ |
| MPC52xx_PCI_IWCR_IO ) |
| )); |
| |
| |
| out_be32(&pci_regs->tbatr0, |
| MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO ); |
| out_be32(&pci_regs->tbatr1, |
| MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM ); |
| |
| out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD); |
| |
| /* Reset the exteral bus ( internal PCI controller is NOT resetted ) */ |
| /* Not necessary and can be a bad thing if for example the bootloader |
| is displaying a splash screen or ... Just left here for |
| documentation purpose if anyone need it */ |
| #if 0 |
| u32 tmp; |
| tmp = in_be32(&pci_regs->gscr); |
| out_be32(&pci_regs->gscr, tmp | MPC52xx_PCI_GSCR_PR); |
| udelay(50); |
| out_be32(&pci_regs->gscr, tmp); |
| #endif |
| } |
| |
| static void __init |
| mpc52xx_pci_fixup_resources(struct pci_dev *dev) |
| { |
| int i; |
| |
| /* We don't rely on boot loader for PCI and resets all |
| devices */ |
| for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { |
| struct resource *res = &dev->resource[i]; |
| if (res->end > res->start) { /* Only valid resources */ |
| res->end -= res->start; |
| res->start = 0; |
| res->flags |= IORESOURCE_UNSET; |
| } |
| } |
| |
| /* The PCI Host bridge of MPC52xx has a prefetch memory resource |
| fixed to 1Gb. Doesn't fit in the resource system so we remove it */ |
| if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) && |
| (dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200) ) { |
| struct resource *res = &dev->resource[1]; |
| res->start = res->end = res->flags = 0; |
| } |
| } |
| |
| void __init |
| mpc52xx_find_bridges(void) |
| { |
| struct mpc52xx_pci __iomem *pci_regs; |
| struct pci_controller *hose; |
| |
| pci_assign_all_buses = 1; |
| |
| pci_regs = ioremap(MPC52xx_PA(MPC52xx_PCI_OFFSET), MPC52xx_PCI_SIZE); |
| if (!pci_regs) |
| return; |
| |
| hose = pcibios_alloc_controller(); |
| if (!hose) { |
| iounmap(pci_regs); |
| return; |
| } |
| |
| ppc_md.pci_swizzle = common_swizzle; |
| ppc_md.pcibios_fixup_resources = mpc52xx_pci_fixup_resources; |
| |
| hose->first_busno = 0; |
| hose->last_busno = 0xff; |
| hose->bus_offset = 0; |
| hose->ops = &mpc52xx_pci_ops; |
| |
| mpc52xx_pci_setup(pci_regs); |
| |
| hose->pci_mem_offset = MPC52xx_PCI_MEM_OFFSET; |
| |
| hose->io_base_virt = ioremap(MPC52xx_PCI_IO_BASE, MPC52xx_PCI_IO_SIZE); |
| isa_io_base = (unsigned long) hose->io_base_virt; |
| |
| hose->cfg_addr = &pci_regs->car; |
| hose->cfg_data = hose->io_base_virt; |
| |
| /* Setup resources */ |
| pci_init_resource(&hose->mem_resources[0], |
| MPC52xx_PCI_MEM_START, |
| MPC52xx_PCI_MEM_STOP, |
| IORESOURCE_MEM|IORESOURCE_PREFETCH, |
| "PCI prefetchable memory"); |
| |
| pci_init_resource(&hose->mem_resources[1], |
| MPC52xx_PCI_MMIO_START, |
| MPC52xx_PCI_MMIO_STOP, |
| IORESOURCE_MEM, |
| "PCI memory"); |
| |
| pci_init_resource(&hose->io_resource, |
| MPC52xx_PCI_IO_START, |
| MPC52xx_PCI_IO_STOP, |
| IORESOURCE_IO, |
| "PCI I/O"); |
| |
| } |