| /* |
| * linux/drivers/pcmcia/pxa2xx_stargate2.c |
| * |
| * Stargate 2 PCMCIA specific routines. |
| * |
| * Created: December 6, 2005 |
| * Author: Ed C. Epp |
| * Copyright: Intel Corp 2005 |
| * Jonathan Cameron <jic23@cam.ac.uk> 2009 |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| |
| #include <pcmcia/ss.h> |
| |
| #include <asm/irq.h> |
| #include <asm/mach-types.h> |
| |
| #include "soc_common.h" |
| |
| #define SG2_S0_BUFF_CTL 120 |
| #define SG2_S0_POWER_CTL 108 |
| #define SG2_S0_GPIO_RESET 82 |
| #define SG2_S0_GPIO_DETECT 53 |
| #define SG2_S0_GPIO_READY 81 |
| |
| static struct pcmcia_irqs irqs[] = { |
| { 0, IRQ_GPIO(SG2_S0_GPIO_DETECT), "PCMCIA0 CD" }, |
| }; |
| |
| static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt) |
| { |
| skt->socket.pci_irq = IRQ_GPIO(SG2_S0_GPIO_READY); |
| return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
| } |
| |
| static void sg2_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) |
| { |
| soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
| } |
| |
| static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt, |
| struct pcmcia_state *state) |
| { |
| state->detect = !gpio_get_value(SG2_S0_GPIO_DETECT); |
| state->ready = !!gpio_get_value(SG2_S0_GPIO_READY); |
| state->bvd1 = 0; /* not available - battery detect on card */ |
| state->bvd2 = 0; /* not available */ |
| state->vs_3v = 1; /* not available - voltage detect for card */ |
| state->vs_Xv = 0; /* not available */ |
| state->wrprot = 0; /* not available - write protect */ |
| } |
| |
| static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, |
| const socket_state_t *state) |
| { |
| /* Enable card power */ |
| switch (state->Vcc) { |
| case 0: |
| /* sets power ctl register high */ |
| gpio_set_value(SG2_S0_POWER_CTL, 1); |
| break; |
| case 33: |
| case 50: |
| /* sets power control register low (clear) */ |
| gpio_set_value(SG2_S0_POWER_CTL, 0); |
| msleep(100); |
| break; |
| default: |
| pr_err("%s(): bad Vcc %u\n", |
| __func__, state->Vcc); |
| return -1; |
| } |
| |
| /* reset */ |
| gpio_set_value(SG2_S0_GPIO_RESET, !!(state->flags & SS_RESET)); |
| |
| return 0; |
| } |
| |
| static void sg2_pcmcia_socket_init(struct soc_pcmcia_socket *skt) |
| { |
| soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
| } |
| |
| static void sg2_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) |
| { |
| soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
| } |
| |
| static struct pcmcia_low_level sg2_pcmcia_ops __initdata = { |
| .owner = THIS_MODULE, |
| .hw_init = sg2_pcmcia_hw_init, |
| .hw_shutdown = sg2_pcmcia_hw_shutdown, |
| .socket_state = sg2_pcmcia_socket_state, |
| .configure_socket = sg2_pcmcia_configure_socket, |
| .socket_init = sg2_pcmcia_socket_init, |
| .socket_suspend = sg2_pcmcia_socket_suspend, |
| .nr = 1, |
| }; |
| |
| static struct platform_device *sg2_pcmcia_device; |
| |
| static int __init sg2_pcmcia_init(void) |
| { |
| int ret; |
| |
| if (!machine_is_stargate2()) |
| return -ENODEV; |
| |
| sg2_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); |
| if (!sg2_pcmcia_device) |
| return -ENOMEM; |
| |
| ret = gpio_request(SG2_S0_BUFF_CTL, "SG2 CF buff ctl"); |
| if (ret) |
| goto error_put_platform_device; |
| ret = gpio_request(SG2_S0_POWER_CTL, "SG2 CF power ctl"); |
| if (ret) |
| goto error_free_gpio_buff_ctl; |
| ret = gpio_request(SG2_S0_GPIO_RESET, "SG2 CF reset"); |
| if (ret) |
| goto error_free_gpio_power_ctl; |
| /* Set gpio directions */ |
| gpio_direction_output(SG2_S0_BUFF_CTL, 0); |
| gpio_direction_output(SG2_S0_POWER_CTL, 1); |
| gpio_direction_output(SG2_S0_GPIO_RESET, 1); |
| |
| ret = platform_device_add_data(sg2_pcmcia_device, |
| &sg2_pcmcia_ops, |
| sizeof(sg2_pcmcia_ops)); |
| if (ret) |
| goto error_free_gpio_reset; |
| |
| ret = platform_device_add(sg2_pcmcia_device); |
| if (ret) |
| goto error_free_gpio_reset; |
| |
| return 0; |
| error_free_gpio_reset: |
| gpio_free(SG2_S0_GPIO_RESET); |
| error_free_gpio_power_ctl: |
| gpio_free(SG2_S0_POWER_CTL); |
| error_free_gpio_buff_ctl: |
| gpio_free(SG2_S0_BUFF_CTL); |
| error_put_platform_device: |
| platform_device_put(sg2_pcmcia_device); |
| |
| return ret; |
| } |
| |
| static void __exit sg2_pcmcia_exit(void) |
| { |
| platform_device_unregister(sg2_pcmcia_device); |
| gpio_free(SG2_S0_BUFF_CTL); |
| gpio_free(SG2_S0_POWER_CTL); |
| gpio_free(SG2_S0_GPIO_RESET); |
| } |
| |
| fs_initcall(sg2_pcmcia_init); |
| module_exit(sg2_pcmcia_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:pxa2xx-pcmcia"); |