| /* Copyright (c) 2016-2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "dsi-panel-sim-video.dtsi" |
| #include "dsi-panel-sim-cmd.dtsi" |
| #include "dsi-panel-sim-dualmipi-video.dtsi" |
| #include "dsi-panel-sim-dualmipi-cmd.dtsi" |
| #include "dsi-panel-sharp-dsc-4k-video.dtsi" |
| #include "dsi-panel-sharp-dsc-4k-cmd.dtsi" |
| #include "dsi-panel-nt35597-truly-dualmipi-wqxga-video.dtsi" |
| #include "dsi-panel-nt35597-truly-dualmipi-wqxga-cmd.dtsi" |
| #include "dsi-panel-nt35597-truly-dsc-wqxga-cmd.dtsi" |
| #include "dsi-panel-nt35597-truly-dsc-wqxga-video.dtsi" |
| #include "dsi-panel-sharp-1080p-cmd.dtsi" |
| #include "dsi-panel-sharp-dualmipi-1080p-120hz.dtsi" |
| #include "dsi-panel-s6e3ha3-amoled-dualmipi-wqhd-cmd.dtsi" |
| #include "sdm845-pinctrl.dtsi" |
| |
| &soc { |
| dsi_panel_pwr_supply: dsi_panel_pwr_supply { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| qcom,panel-supply-entry@0 { |
| reg = <0>; |
| qcom,supply-name = "vddio"; |
| qcom,supply-min-voltage = <1800000>; |
| qcom,supply-max-voltage = <1800000>; |
| qcom,supply-enable-load = <62000>; |
| qcom,supply-disable-load = <80>; |
| qcom,supply-post-on-sleep = <20>; |
| }; |
| |
| qcom,panel-supply-entry@1 { |
| reg = <1>; |
| qcom,supply-name = "lab"; |
| qcom,supply-min-voltage = <4600000>; |
| qcom,supply-max-voltage = <6000000>; |
| qcom,supply-enable-load = <100000>; |
| qcom,supply-disable-load = <100>; |
| }; |
| |
| qcom,panel-supply-entry@2 { |
| reg = <2>; |
| qcom,supply-name = "ibb"; |
| qcom,supply-min-voltage = <4600000>; |
| qcom,supply-max-voltage = <6000000>; |
| qcom,supply-enable-load = <100000>; |
| qcom,supply-disable-load = <100>; |
| qcom,supply-post-on-sleep = <20>; |
| }; |
| }; |
| |
| dsi_panel_pwr_supply_no_labibb: dsi_panel_pwr_supply_no_labibb { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| qcom,panel-supply-entry@0 { |
| reg = <0>; |
| qcom,supply-name = "vddio"; |
| qcom,supply-min-voltage = <1800000>; |
| qcom,supply-max-voltage = <1800000>; |
| qcom,supply-enable-load = <62000>; |
| qcom,supply-disable-load = <80>; |
| qcom,supply-post-on-sleep = <20>; |
| }; |
| }; |
| |
| dsi_panel_pwr_supply_vdd_no_labibb: dsi_panel_pwr_supply_vdd_no_labibb { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| qcom,panel-supply-entry@0 { |
| reg = <0>; |
| qcom,supply-name = "vddio"; |
| qcom,supply-min-voltage = <1800000>; |
| qcom,supply-max-voltage = <1800000>; |
| qcom,supply-enable-load = <62000>; |
| qcom,supply-disable-load = <80>; |
| qcom,supply-post-on-sleep = <20>; |
| }; |
| |
| qcom,panel-supply-entry@1 { |
| reg = <1>; |
| qcom,supply-name = "vdd"; |
| qcom,supply-min-voltage = <3000000>; |
| qcom,supply-max-voltage = <3000000>; |
| qcom,supply-enable-load = <857000>; |
| qcom,supply-disable-load = <0>; |
| qcom,supply-post-on-sleep = <0>; |
| }; |
| }; |
| |
| dsi_sharp_4k_dsc_video_display: qcom,dsi-display@0 { |
| compatible = "qcom,dsi-display"; |
| label = "dsi_sharp_4k_dsc_video"; |
| qcom,display-type = "primary"; |
| |
| qcom,dsi-ctrl = <&mdss_dsi0 &mdss_dsi1>; |
| qcom,dsi-phy = <&mdss_dsi_phy0 &mdss_dsi_phy1>; |
| clocks = <&clock_dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| <&clock_dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| clock-names = "src_byte_clk", "src_pixel_clk"; |
| |
| pinctrl-names = "panel_active", "panel_suspend"; |
| pinctrl-0 = <&sde_dsi_active &sde_te_active>; |
| pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| |
| qcom,dsi-panel = <&dsi_sharp_4k_dsc_video>; |
| vddio-supply = <&pm8998_l14>; |
| lab-supply = <&lab_regulator>; |
| ibb-supply = <&ibb_regulator>; |
| }; |
| |
| dsi_sharp_4k_dsc_cmd_display: qcom,dsi-display@1 { |
| compatible = "qcom,dsi-display"; |
| label = "dsi_sharp_4k_dsc_cmd"; |
| qcom,display-type = "primary"; |
| |
| qcom,dsi-ctrl = <&mdss_dsi0 &mdss_dsi1>; |
| qcom,dsi-phy = <&mdss_dsi_phy0 &mdss_dsi_phy1>; |
| clocks = <&clock_dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| <&clock_dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| clock-names = "src_byte_clk", "src_pixel_clk"; |
| |
| pinctrl-names = "panel_active", "panel_suspend"; |
| pinctrl-0 = <&sde_dsi_active &sde_te_active>; |
| pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| |
| qcom,dsi-panel = <&dsi_sharp_4k_dsc_cmd>; |
| vddio-supply = <&pm8998_l14>; |
| lab-supply = <&lab_regulator>; |
| ibb-supply = <&ibb_regulator>; |
| }; |
| |
| dsi_sharp_1080_cmd_display: qcom,dsi-display@2 { |
| compatible = "qcom,dsi-display"; |
| label = "dsi_sharp_1080_cmd"; |
| qcom,display-type = "primary"; |
| |
| qcom,dsi-ctrl = <&mdss_dsi0 &mdss_dsi1>; |
| qcom,dsi-phy = <&mdss_dsi_phy0 &mdss_dsi_phy1>; |
| clocks = <&clock_dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| <&clock_dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| clock-names = "src_byte_clk", "src_pixel_clk"; |
| |
| pinctrl-names = "panel_active", "panel_suspend"; |
| pinctrl-0 = <&sde_dsi_active &sde_te_active>; |
| pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| |
| qcom,dsi-panel = <&dsi_sharp_1080_cmd>; |
| vddio-supply = <&pm8998_l14>; |
| lab-supply = <&lab_regulator>; |
| ibb-supply = <&ibb_regulator>; |
| }; |
| |
| dsi_dual_sharp_1080_120hz_cmd_display: qcom,dsi-display@3 { |
| compatible = "qcom,dsi-display"; |
| label = "dsi_dual_sharp_1080_120hz_cmd"; |
| qcom,display-type = "primary"; |
| |
| qcom,dsi-ctrl = <&mdss_dsi0 &mdss_dsi1>; |
| qcom,dsi-phy = <&mdss_dsi_phy0 &mdss_dsi_phy1>; |
| clocks = <&clock_dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| <&clock_dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| clock-names = "src_byte_clk", "src_pixel_clk"; |
| |
| pinctrl-names = "panel_active", "panel_suspend"; |
| pinctrl-0 = <&sde_dsi_active &sde_te_active>; |
| pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| |
| qcom,dsi-panel = <&dsi_dual_sharp_1080_120hz_cmd>; |
| vddio-supply = <&pm8998_l14>; |
| lab-supply = <&lab_regulator>; |
| ibb-supply = <&ibb_regulator>; |
| }; |
| |
| dsi_dual_nt35597_truly_video_display: qcom,dsi-display@4 { |
| compatible = "qcom,dsi-display"; |
| label = "dsi_dual_nt35597_truly_video"; |
| qcom,display-type = "primary"; |
| |
| qcom,dsi-ctrl = <&mdss_dsi0 &mdss_dsi1>; |
| qcom,dsi-phy = <&mdss_dsi_phy0 &mdss_dsi_phy1>; |
| clocks = <&clock_dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| <&clock_dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| clock-names = "src_byte_clk", "src_pixel_clk"; |
| |
| pinctrl-names = "panel_active", "panel_suspend"; |
| pinctrl-0 = <&sde_dsi_active &sde_te_active>; |
| pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| |
| qcom,dsi-panel = <&dsi_dual_nt35597_truly_video>; |
| vddio-supply = <&pm8998_l14>; |
| lab-supply = <&lab_regulator>; |
| ibb-supply = <&ibb_regulator>; |
| }; |
| |
| dsi_dual_nt35597_truly_cmd_display: qcom,dsi-display@5 { |
| compatible = "qcom,dsi-display"; |
| label = "dsi_dual_nt35597_truly_cmd"; |
| qcom,display-type = "primary"; |
| |
| qcom,dsi-ctrl = <&mdss_dsi0 &mdss_dsi1>; |
| qcom,dsi-phy = <&mdss_dsi_phy0 &mdss_dsi_phy1>; |
| clocks = <&clock_dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| <&clock_dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| clock-names = "src_byte_clk", "src_pixel_clk"; |
| |
| pinctrl-names = "panel_active", "panel_suspend"; |
| pinctrl-0 = <&sde_dsi_active &sde_te_active>; |
| pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| |
| qcom,dsi-panel = <&dsi_dual_nt35597_truly_cmd>; |
| vddio-supply = <&pm8998_l14>; |
| lab-supply = <&lab_regulator>; |
| ibb-supply = <&ibb_regulator>; |
| }; |
| |
| dsi_nt35597_truly_dsc_cmd_display: qcom,dsi-display@6 { |
| compatible = "qcom,dsi-display"; |
| label = "dsi_nt35597_truly_dsc_cmd"; |
| qcom,display-type = "primary"; |
| |
| qcom,dsi-ctrl = <&mdss_dsi0 &mdss_dsi1>; |
| qcom,dsi-phy = <&mdss_dsi_phy0 &mdss_dsi_phy1>; |
| clocks = <&clock_dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| <&clock_dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| clock-names = "src_byte_clk", "src_pixel_clk"; |
| |
| pinctrl-names = "panel_active", "panel_suspend"; |
| pinctrl-0 = <&sde_dsi_active &sde_te_active>; |
| pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| |
| qcom,dsi-panel = <&dsi_nt35597_truly_dsc_cmd>; |
| vddio-supply = <&pm8998_l14>; |
| lab-supply = <&lab_regulator>; |
| ibb-supply = <&ibb_regulator>; |
| }; |
| |
| dsi_nt35597_truly_dsc_video_display: qcom,dsi-display@7 { |
| compatible = "qcom,dsi-display"; |
| label = "dsi_nt35597_truly_dsc_video"; |
| qcom,display-type = "primary"; |
| |
| qcom,dsi-ctrl = <&mdss_dsi0 &mdss_dsi1>; |
| qcom,dsi-phy = <&mdss_dsi_phy0 &mdss_dsi_phy1>; |
| clocks = <&clock_dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| <&clock_dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| clock-names = "src_byte_clk", "src_pixel_clk"; |
| |
| pinctrl-names = "panel_active", "panel_suspend"; |
| pinctrl-0 = <&sde_dsi_active &sde_te_active>; |
| pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| |
| qcom,dsi-panel = <&dsi_nt35597_truly_dsc_video>; |
| vddio-supply = <&pm8998_l14>; |
| lab-supply = <&lab_regulator>; |
| ibb-supply = <&ibb_regulator>; |
| }; |
| |
| sde_wb: qcom,wb-display@0 { |
| compatible = "qcom,wb-display"; |
| cell-index = <0>; |
| label = "wb_display"; |
| }; |
| }; |
| |
| &mdss_mdp { |
| connectors = <&sde_wb>; |
| }; |