| /* |
| * Universal Flash Storage Host controller driver |
| * |
| * This code is based on drivers/scsi/ufs/ufs.h |
| * Copyright (C) 2011-2013 Samsung India Software Operations |
| * |
| * Authors: |
| * Santosh Yaraganavi <santosh.sy@samsung.com> |
| * Vinayak Holikatti <h.vinayak@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * See the COPYING file in the top-level directory or visit |
| * <http://www.gnu.org/licenses/gpl-2.0.html> |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * This program is provided "AS IS" and "WITH ALL FAULTS" and |
| * without warranty of any kind. You are solely responsible for |
| * determining the appropriateness of using and distributing |
| * the program and assume all risks associated with your exercise |
| * of rights with respect to the program, including but not limited |
| * to infringement of third party rights, the risks and costs of |
| * program errors, damage to or loss of data, programs or equipment, |
| * and unavailability or interruption of operations. Under no |
| * circumstances will the contributor of this Program be liable for |
| * any damages of any kind arising from your use or distribution of |
| * this program. |
| */ |
| |
| #ifndef _UFS_H |
| #define _UFS_H |
| |
| #include <linux/mutex.h> |
| #include <linux/types.h> |
| #include <scsi/ufs/ufs.h> |
| |
| #define MAX_CDB_SIZE 16 |
| #define GENERAL_UPIU_REQUEST_SIZE 32 |
| #define QUERY_DESC_MAX_SIZE 255 |
| #define QUERY_DESC_MIN_SIZE 2 |
| #define QUERY_DESC_HDR_SIZE 2 |
| #define QUERY_OSF_SIZE (GENERAL_UPIU_REQUEST_SIZE - \ |
| (sizeof(struct utp_upiu_header))) |
| #define RESPONSE_UPIU_SENSE_DATA_LENGTH 18 |
| |
| #define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\ |
| cpu_to_be32((byte3 << 24) | (byte2 << 16) |\ |
| (byte1 << 8) | (byte0)) |
| /* |
| * UFS device may have standard LUs and LUN id could be from 0x00 to |
| * 0x7F. Standard LUs use "Peripheral Device Addressing Format". |
| * UFS device may also have the Well Known LUs (also referred as W-LU) |
| * which again could be from 0x00 to 0x7F. For W-LUs, device only use |
| * the "Extended Addressing Format" which means the W-LUNs would be |
| * from 0xc100 (SCSI_W_LUN_BASE) onwards. |
| * This means max. LUN number reported from UFS device could be 0xC17F. |
| */ |
| #define UFS_UPIU_MAX_UNIT_NUM_ID 0x7F |
| #define UFS_MAX_LUNS (SCSI_W_LUN_BASE + UFS_UPIU_MAX_UNIT_NUM_ID) |
| #define UFS_UPIU_WLUN_ID (1 << 7) |
| #define UFS_UPIU_MAX_GENERAL_LUN 8 |
| #define UFS_MAX_WLUS 4 |
| #define UFS_MAX_LUS (UFS_UPIU_MAX_GENERAL_LUN + UFS_MAX_WLUS) |
| |
| #define QUERY_DESC_IDN_CONFIGURATION QUERY_DESC_IDN_CONFIGURAION |
| |
| /* Well known logical unit id in LUN field of UPIU */ |
| enum { |
| UFS_UPIU_REPORT_LUNS_WLUN = 0x81, |
| UFS_UPIU_UFS_DEVICE_WLUN = 0xD0, |
| UFS_UPIU_BOOT_WLUN = 0xB0, |
| UFS_UPIU_RPMB_WLUN = 0xC4, |
| }; |
| |
| /** |
| * ufs_is_valid_unit_desc_lun - checks if the given LUN has a unit descriptor |
| * @lun: LU number to check |
| * @return: true if the lun has a matching unit descriptor, false otherwise |
| */ |
| static inline bool ufs_is_valid_unit_desc_lun(u8 lun) |
| { |
| return lun == UFS_UPIU_RPMB_WLUN || (lun < UFS_UPIU_MAX_GENERAL_LUN); |
| } |
| |
| /* |
| * UFS Protocol Information Unit related definitions |
| */ |
| |
| /* Task management functions */ |
| enum { |
| UFS_ABORT_TASK = 0x01, |
| UFS_ABORT_TASK_SET = 0x02, |
| UFS_CLEAR_TASK_SET = 0x04, |
| UFS_LOGICAL_RESET = 0x08, |
| UFS_QUERY_TASK = 0x80, |
| UFS_QUERY_TASK_SET = 0x81, |
| }; |
| |
| /* UTP UPIU Transaction Codes Initiator to Target */ |
| enum { |
| UPIU_TRANSACTION_NOP_OUT = 0x00, |
| UPIU_TRANSACTION_COMMAND = 0x01, |
| UPIU_TRANSACTION_DATA_OUT = 0x02, |
| UPIU_TRANSACTION_TASK_REQ = 0x04, |
| UPIU_TRANSACTION_QUERY_REQ = 0x16, |
| }; |
| |
| /* UTP UPIU Transaction Codes Target to Initiator */ |
| enum { |
| UPIU_TRANSACTION_NOP_IN = 0x20, |
| UPIU_TRANSACTION_RESPONSE = 0x21, |
| UPIU_TRANSACTION_DATA_IN = 0x22, |
| UPIU_TRANSACTION_TASK_RSP = 0x24, |
| UPIU_TRANSACTION_READY_XFER = 0x31, |
| UPIU_TRANSACTION_QUERY_RSP = 0x36, |
| UPIU_TRANSACTION_REJECT_UPIU = 0x3F, |
| }; |
| |
| /* UPIU Read/Write flags */ |
| enum { |
| UPIU_CMD_FLAGS_NONE = 0x00, |
| UPIU_CMD_FLAGS_WRITE = 0x20, |
| UPIU_CMD_FLAGS_READ = 0x40, |
| }; |
| |
| /* UPIU Task Attributes */ |
| enum { |
| UPIU_TASK_ATTR_SIMPLE = 0x00, |
| UPIU_TASK_ATTR_ORDERED = 0x01, |
| UPIU_TASK_ATTR_HEADQ = 0x02, |
| UPIU_TASK_ATTR_ACA = 0x03, |
| }; |
| |
| /* UPIU Query request function */ |
| enum { |
| UPIU_QUERY_FUNC_STANDARD_READ_REQUEST = 0x01, |
| UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST = 0x81, |
| }; |
| |
| enum desc_header_offset { |
| QUERY_DESC_LENGTH_OFFSET = 0x00, |
| QUERY_DESC_DESC_TYPE_OFFSET = 0x01, |
| }; |
| |
| enum ufs_desc_def_size { |
| QUERY_DESC_DEVICE_DEF_SIZE = 0x40, |
| QUERY_DESC_CONFIGURATION_DEF_SIZE = 0x90, |
| QUERY_DESC_UNIT_DEF_SIZE = 0x23, |
| QUERY_DESC_INTERCONNECT_DEF_SIZE = 0x06, |
| QUERY_DESC_GEOMETRY_DEF_SIZE = 0x44, |
| QUERY_DESC_POWER_DEF_SIZE = 0x62, |
| }; |
| |
| /* Unit descriptor parameters offsets in bytes*/ |
| enum unit_desc_param { |
| UNIT_DESC_PARAM_LEN = 0x0, |
| UNIT_DESC_PARAM_TYPE = 0x1, |
| UNIT_DESC_PARAM_UNIT_INDEX = 0x2, |
| UNIT_DESC_PARAM_LU_ENABLE = 0x3, |
| UNIT_DESC_PARAM_BOOT_LUN_ID = 0x4, |
| UNIT_DESC_PARAM_LU_WR_PROTECT = 0x5, |
| UNIT_DESC_PARAM_LU_Q_DEPTH = 0x6, |
| UNIT_DESC_PARAM_MEM_TYPE = 0x8, |
| UNIT_DESC_PARAM_DATA_RELIABILITY = 0x9, |
| UNIT_DESC_PARAM_LOGICAL_BLK_SIZE = 0xA, |
| UNIT_DESC_PARAM_LOGICAL_BLK_COUNT = 0xB, |
| UNIT_DESC_PARAM_ERASE_BLK_SIZE = 0x13, |
| UNIT_DESC_PARAM_PROVISIONING_TYPE = 0x17, |
| UNIT_DESC_PARAM_PHY_MEM_RSRC_CNT = 0x18, |
| UNIT_DESC_PARAM_CTX_CAPABILITIES = 0x20, |
| UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1 = 0x22, |
| }; |
| |
| /* Device descriptor parameters offsets in bytes*/ |
| enum device_desc_param { |
| DEVICE_DESC_PARAM_LEN = 0x0, |
| DEVICE_DESC_PARAM_TYPE = 0x1, |
| DEVICE_DESC_PARAM_DEVICE_TYPE = 0x2, |
| DEVICE_DESC_PARAM_DEVICE_CLASS = 0x3, |
| DEVICE_DESC_PARAM_DEVICE_SUB_CLASS = 0x4, |
| DEVICE_DESC_PARAM_PRTCL = 0x5, |
| DEVICE_DESC_PARAM_NUM_LU = 0x6, |
| DEVICE_DESC_PARAM_NUM_WLU = 0x7, |
| DEVICE_DESC_PARAM_BOOT_ENBL = 0x8, |
| DEVICE_DESC_PARAM_DESC_ACCSS_ENBL = 0x9, |
| DEVICE_DESC_PARAM_INIT_PWR_MODE = 0xA, |
| DEVICE_DESC_PARAM_HIGH_PR_LUN = 0xB, |
| DEVICE_DESC_PARAM_SEC_RMV_TYPE = 0xC, |
| DEVICE_DESC_PARAM_SEC_LU = 0xD, |
| DEVICE_DESC_PARAM_BKOP_TERM_LT = 0xE, |
| DEVICE_DESC_PARAM_ACTVE_ICC_LVL = 0xF, |
| DEVICE_DESC_PARAM_SPEC_VER = 0x10, |
| DEVICE_DESC_PARAM_MANF_DATE = 0x12, |
| DEVICE_DESC_PARAM_MANF_NAME = 0x14, |
| DEVICE_DESC_PARAM_PRDCT_NAME = 0x15, |
| DEVICE_DESC_PARAM_SN = 0x16, |
| DEVICE_DESC_PARAM_OEM_ID = 0x17, |
| DEVICE_DESC_PARAM_MANF_ID = 0x18, |
| DEVICE_DESC_PARAM_UD_OFFSET = 0x1A, |
| DEVICE_DESC_PARAM_UD_LEN = 0x1B, |
| DEVICE_DESC_PARAM_RTT_CAP = 0x1C, |
| DEVICE_DESC_PARAM_FRQ_RTC = 0x1D, |
| }; |
| /* |
| * Logical Unit Write Protect |
| * 00h: LU not write protected |
| * 01h: LU write protected when fPowerOnWPEn =1 |
| * 02h: LU permanently write protected when fPermanentWPEn =1 |
| */ |
| enum ufs_lu_wp_type { |
| UFS_LU_NO_WP = 0x00, |
| UFS_LU_POWER_ON_WP = 0x01, |
| UFS_LU_PERM_WP = 0x02, |
| }; |
| |
| /* bActiveICCLevel parameter current units */ |
| enum { |
| UFSHCD_NANO_AMP = 0, |
| UFSHCD_MICRO_AMP = 1, |
| UFSHCD_MILI_AMP = 2, |
| UFSHCD_AMP = 3, |
| }; |
| |
| #define POWER_DESC_MAX_SIZE 0x62 |
| #define POWER_DESC_MAX_ACTV_ICC_LVLS 16 |
| |
| /* Attribute bActiveICCLevel parameter bit masks definitions */ |
| #define ATTR_ICC_LVL_UNIT_OFFSET 14 |
| #define ATTR_ICC_LVL_UNIT_MASK (0x3 << ATTR_ICC_LVL_UNIT_OFFSET) |
| #define ATTR_ICC_LVL_VALUE_MASK 0x3FF |
| |
| /* Power descriptor parameters offsets in bytes */ |
| enum power_desc_param_offset { |
| PWR_DESC_LEN = 0x0, |
| PWR_DESC_TYPE = 0x1, |
| PWR_DESC_ACTIVE_LVLS_VCC_0 = 0x2, |
| PWR_DESC_ACTIVE_LVLS_VCCQ_0 = 0x22, |
| PWR_DESC_ACTIVE_LVLS_VCCQ2_0 = 0x42, |
| }; |
| |
| /* Exception event mask values */ |
| enum { |
| MASK_EE_STATUS = 0xFFFF, |
| MASK_EE_URGENT_BKOPS = (1 << 2), |
| }; |
| |
| /* Background operation status */ |
| enum bkops_status { |
| BKOPS_STATUS_NO_OP = 0x0, |
| BKOPS_STATUS_NON_CRITICAL = 0x1, |
| BKOPS_STATUS_PERF_IMPACT = 0x2, |
| BKOPS_STATUS_CRITICAL = 0x3, |
| BKOPS_STATUS_MAX = BKOPS_STATUS_CRITICAL, |
| }; |
| |
| /* bRefClkFreq attribute values */ |
| enum ref_clk_freq { |
| REF_CLK_FREQ_19_2_MHZ = 0x0, |
| REF_CLK_FREQ_26_MHZ = 0x1, |
| REF_CLK_FREQ_38_4_MHZ = 0x2, |
| REF_CLK_FREQ_52_MHZ = 0x3, |
| REF_CLK_FREQ_MAX = REF_CLK_FREQ_52_MHZ, |
| }; |
| |
| /* Query response result code */ |
| enum { |
| QUERY_RESULT_SUCCESS = 0x00, |
| QUERY_RESULT_NOT_READABLE = 0xF6, |
| QUERY_RESULT_NOT_WRITEABLE = 0xF7, |
| QUERY_RESULT_ALREADY_WRITTEN = 0xF8, |
| QUERY_RESULT_INVALID_LENGTH = 0xF9, |
| QUERY_RESULT_INVALID_VALUE = 0xFA, |
| QUERY_RESULT_INVALID_SELECTOR = 0xFB, |
| QUERY_RESULT_INVALID_INDEX = 0xFC, |
| QUERY_RESULT_INVALID_IDN = 0xFD, |
| QUERY_RESULT_INVALID_OPCODE = 0xFE, |
| QUERY_RESULT_GENERAL_FAILURE = 0xFF, |
| }; |
| |
| /* UTP Transfer Request Command Type (CT) */ |
| enum { |
| UPIU_COMMAND_SET_TYPE_SCSI = 0x0, |
| UPIU_COMMAND_SET_TYPE_UFS = 0x1, |
| UPIU_COMMAND_SET_TYPE_QUERY = 0x2, |
| }; |
| |
| /* UTP Transfer Request Command Offset */ |
| #define UPIU_COMMAND_TYPE_OFFSET 28 |
| |
| /* Offset of the response code in the UPIU header */ |
| #define UPIU_RSP_CODE_OFFSET 8 |
| |
| enum { |
| MASK_SCSI_STATUS = 0xFF, |
| MASK_TASK_RESPONSE = 0xFF00, |
| MASK_RSP_UPIU_RESULT = 0xFFFF, |
| MASK_QUERY_DATA_SEG_LEN = 0xFFFF, |
| MASK_RSP_UPIU_DATA_SEG_LEN = 0xFFFF, |
| MASK_RSP_EXCEPTION_EVENT = 0x10000, |
| MASK_TM_SERVICE_RESP = 0xFF, |
| }; |
| |
| /* Task management service response */ |
| enum { |
| UPIU_TASK_MANAGEMENT_FUNC_COMPL = 0x00, |
| UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04, |
| UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED = 0x08, |
| UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05, |
| UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09, |
| }; |
| |
| /* UFS device power modes */ |
| enum ufs_dev_pwr_mode { |
| UFS_ACTIVE_PWR_MODE = 1, |
| UFS_SLEEP_PWR_MODE = 2, |
| UFS_POWERDOWN_PWR_MODE = 3, |
| }; |
| |
| /** |
| * struct utp_upiu_header - UPIU header structure |
| * @dword_0: UPIU header DW-0 |
| * @dword_1: UPIU header DW-1 |
| * @dword_2: UPIU header DW-2 |
| */ |
| struct utp_upiu_header { |
| __be32 dword_0; |
| __be32 dword_1; |
| __be32 dword_2; |
| }; |
| |
| /** |
| * struct utp_upiu_cmd - Command UPIU structure |
| * @data_transfer_len: Data Transfer Length DW-3 |
| * @cdb: Command Descriptor Block CDB DW-4 to DW-7 |
| */ |
| struct utp_upiu_cmd { |
| __be32 exp_data_transfer_len; |
| u8 cdb[MAX_CDB_SIZE]; |
| }; |
| |
| /** |
| * struct utp_upiu_query - upiu request buffer structure for |
| * query request. |
| * @opcode: command to perform B-0 |
| * @idn: a value that indicates the particular type of data B-1 |
| * @index: Index to further identify data B-2 |
| * @selector: Index to further identify data B-3 |
| * @reserved_osf: spec reserved field B-4,5 |
| * @length: number of descriptor bytes to read/write B-6,7 |
| * @value: Attribute value to be written DW-5 |
| * @reserved: spec reserved DW-6,7 |
| */ |
| struct utp_upiu_query { |
| u8 opcode; |
| u8 idn; |
| u8 index; |
| u8 selector; |
| __be16 reserved_osf; |
| __be16 length; |
| __be32 value; |
| __be32 reserved[2]; |
| }; |
| |
| /** |
| * struct utp_upiu_req - general upiu request structure |
| * @header:UPIU header structure DW-0 to DW-2 |
| * @sc: fields structure for scsi command DW-3 to DW-7 |
| * @qr: fields structure for query request DW-3 to DW-7 |
| */ |
| struct utp_upiu_req { |
| struct utp_upiu_header header; |
| union { |
| struct utp_upiu_cmd sc; |
| struct utp_upiu_query qr; |
| }; |
| }; |
| |
| /** |
| * struct utp_cmd_rsp - Response UPIU structure |
| * @residual_transfer_count: Residual transfer count DW-3 |
| * @reserved: Reserved double words DW-4 to DW-7 |
| * @sense_data_len: Sense data length DW-8 U16 |
| * @sense_data: Sense data field DW-8 to DW-12 |
| */ |
| struct utp_cmd_rsp { |
| __be32 residual_transfer_count; |
| __be32 reserved[4]; |
| __be16 sense_data_len; |
| u8 sense_data[RESPONSE_UPIU_SENSE_DATA_LENGTH]; |
| }; |
| |
| /** |
| * struct utp_upiu_rsp - general upiu response structure |
| * @header: UPIU header structure DW-0 to DW-2 |
| * @sr: fields structure for scsi command DW-3 to DW-12 |
| * @qr: fields structure for query request DW-3 to DW-7 |
| */ |
| struct utp_upiu_rsp { |
| struct utp_upiu_header header; |
| union { |
| struct utp_cmd_rsp sr; |
| struct utp_upiu_query qr; |
| }; |
| }; |
| |
| /** |
| * struct utp_upiu_task_req - Task request UPIU structure |
| * @header - UPIU header structure DW0 to DW-2 |
| * @input_param1: Input parameter 1 DW-3 |
| * @input_param2: Input parameter 2 DW-4 |
| * @input_param3: Input parameter 3 DW-5 |
| * @reserved: Reserved double words DW-6 to DW-7 |
| */ |
| struct utp_upiu_task_req { |
| struct utp_upiu_header header; |
| __be32 input_param1; |
| __be32 input_param2; |
| __be32 input_param3; |
| __be32 reserved[2]; |
| }; |
| |
| /** |
| * struct utp_upiu_task_rsp - Task Management Response UPIU structure |
| * @header: UPIU header structure DW0-DW-2 |
| * @output_param1: Ouput parameter 1 DW3 |
| * @output_param2: Output parameter 2 DW4 |
| * @reserved: Reserved double words DW-5 to DW-7 |
| */ |
| struct utp_upiu_task_rsp { |
| struct utp_upiu_header header; |
| __be32 output_param1; |
| __be32 output_param2; |
| __be32 reserved[3]; |
| }; |
| |
| /** |
| * struct ufs_query_req - parameters for building a query request |
| * @query_func: UPIU header query function |
| * @upiu_req: the query request data |
| */ |
| struct ufs_query_req { |
| u8 query_func; |
| struct utp_upiu_query upiu_req; |
| }; |
| |
| /** |
| * struct ufs_query_resp - UPIU QUERY |
| * @response: device response code |
| * @upiu_res: query response data |
| */ |
| struct ufs_query_res { |
| u8 response; |
| struct utp_upiu_query upiu_res; |
| }; |
| |
| #define UFS_VREG_VCC_MIN_UV 2700000 /* uV */ |
| #define UFS_VREG_VCC_MAX_UV 3600000 /* uV */ |
| #define UFS_VREG_VCC_1P8_MIN_UV 1700000 /* uV */ |
| #define UFS_VREG_VCC_1P8_MAX_UV 1950000 /* uV */ |
| #define UFS_VREG_VCCQ_MIN_UV 1100000 /* uV */ |
| #define UFS_VREG_VCCQ_MAX_UV 1300000 /* uV */ |
| #define UFS_VREG_VCCQ2_MIN_UV 1650000 /* uV */ |
| #define UFS_VREG_VCCQ2_MAX_UV 1950000 /* uV */ |
| |
| /* |
| * VCCQ & VCCQ2 current requirement when UFS device is in sleep state |
| * and link is in Hibern8 state. |
| */ |
| #define UFS_VREG_LPM_LOAD_UA 1000 /* uA */ |
| |
| struct ufs_vreg { |
| struct regulator *reg; |
| const char *name; |
| bool enabled; |
| bool unused; |
| int min_uV; |
| int max_uV; |
| int min_uA; |
| int max_uA; |
| }; |
| |
| struct ufs_vreg_info { |
| struct ufs_vreg *vcc; |
| struct ufs_vreg *vccq; |
| struct ufs_vreg *vccq2; |
| struct ufs_vreg *vdd_hba; |
| }; |
| |
| /* Possible values for bDeviceSubClass of device descriptor */ |
| enum { |
| UFS_DEV_EMBEDDED_BOOTABLE = 0x00, |
| UFS_DEV_EMBEDDED_NON_BOOTABLE = 0x01, |
| UFS_DEV_REMOVABLE_BOOTABLE = 0x02, |
| UFS_DEV_REMOVABLE_NON_BOOTABLE = 0x03, |
| }; |
| |
| struct ufs_dev_info { |
| /* device descriptor info */ |
| u8 b_device_sub_class; |
| u16 w_manufacturer_id; |
| u8 i_product_name; |
| |
| /* query flags */ |
| bool f_power_on_wp_en; |
| |
| /* Keeps information if any of the LU is power on write protected */ |
| bool is_lu_power_on_wp; |
| /* is Unit Attention Condition cleared on UFS Device LUN? */ |
| unsigned is_ufs_dev_wlun_ua_cleared:1; |
| |
| /* Device deviations from standard UFS device spec. */ |
| unsigned int quirks; |
| }; |
| |
| #endif /* End of Header */ |