| |
| menu "Macintosh device drivers" |
| depends on PPC || MAC |
| |
| config ADB |
| bool "Apple Desktop Bus (ADB) support" |
| depends on MAC || (PPC_PMAC && PPC32) |
| help |
| Apple Desktop Bus (ADB) support is for support of devices which |
| are connected to an ADB port. ADB devices tend to have 4 pins. |
| If you have an Apple Macintosh prior to the iMac, an iBook or |
| PowerBook, or a "Blue and White G3", you probably want to say Y |
| here. Otherwise say N. |
| |
| config ADB_MACII |
| bool "Include Mac II ADB driver" |
| depends on ADB && MAC |
| help |
| Say Y here if want your kernel to support Macintosh systems that use |
| the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, |
| Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and |
| Centris 650. |
| |
| config ADB_MACIISI |
| bool "Include Mac IIsi ADB driver" |
| depends on ADB && MAC |
| help |
| Say Y here if want your kernel to support Macintosh systems that use |
| the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic |
| II, LC, LC II, LC III, Performa 460, and the Performa 600. |
| |
| config ADB_IOP |
| bool "Include IOP (IIfx/Quadra 9x0) ADB driver" |
| depends on ADB && MAC |
| help |
| The I/O Processor (IOP) is an Apple custom IC designed to provide |
| intelligent support for I/O controllers. It is described at |
| <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct |
| support for it, say 'Y' here. |
| |
| config ADB_PMU68K |
| bool "Include PMU (Powerbook) ADB driver" |
| depends on ADB && MAC |
| help |
| Say Y here if want your kernel to support the m68k based Powerbooks. |
| This includes the PowerBook 140, PowerBook 145, PowerBook 150, |
| PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, |
| PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, |
| PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, |
| PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. |
| |
| # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU |
| config ADB_CUDA |
| bool "Support for CUDA based Macs and PowerMacs" |
| depends on (ADB || PPC_PMAC) && !PPC_PMAC64 |
| help |
| This provides support for CUDA based Macintosh and Power Macintosh |
| systems. This includes many m68k based Macs (Color Classic, Mac TV, |
| Performa 475, Performa 520, Performa 550, Performa 575, |
| Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and |
| Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, |
| the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later |
| models should use CONFIG_ADB_PMU instead. It is safe to say Y here |
| even if your machine doesn't have a CUDA. |
| |
| If unsure say Y. |
| |
| config ADB_PMU |
| bool "Support for PMU based PowerMacs" |
| depends on PPC_PMAC |
| help |
| On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the |
| PMU is an embedded microprocessor whose primary function is to |
| control system power, and battery charging on the portable models. |
| The PMU also controls the ADB (Apple Desktop Bus) which connects to |
| the keyboard and mouse on some machines, as well as the non-volatile |
| RAM and the RTC (real time clock) chip. Say Y to enable support for |
| this device; you should do so if your machine is one of those |
| mentioned above. |
| |
| config ADB_PMU_LED |
| bool "Support for the Power/iBook front LED" |
| depends on ADB_PMU |
| select NEW_LEDS |
| select LEDS_CLASS |
| help |
| Support the front LED on Power/iBooks as a generic LED that can |
| be triggered by any of the supported triggers. To get the |
| behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this |
| and the ide-disk LED trigger and configure appropriately through |
| sysfs. |
| |
| config ADB_PMU_LED_IDE |
| bool "Use front LED as IDE LED by default" |
| depends on ADB_PMU_LED |
| select LEDS_TRIGGERS |
| select LEDS_TRIGGER_IDE_DISK |
| help |
| This option makes the front LED default to the IDE trigger |
| so that it blinks on IDE activity. |
| |
| config PMAC_SMU |
| bool "Support for SMU based PowerMacs" |
| depends on PPC_PMAC64 |
| help |
| This option adds support for the newer G5 iMacs and PowerMacs based |
| on the "SMU" system control chip which replaces the old PMU. |
| If you don't know, say Y. |
| |
| config PMAC_APM_EMU |
| tristate "APM emulation" |
| depends on PPC_PMAC && PPC32 && PM |
| |
| config PMAC_MEDIABAY |
| bool "Support PowerBook hotswap media bay" |
| depends on PPC_PMAC && PPC32 |
| help |
| This option adds support for older PowerBook's hotswap media bay |
| that can contains batteries, floppy drives, or IDE devices. PCI |
| devices are not fully supported in the bay as I never had one to |
| try with |
| |
| config PMAC_BACKLIGHT |
| bool "Backlight control for LCD screens" |
| depends on ADB_PMU && (BROKEN || !PPC64) |
| help |
| Say Y here to enable Macintosh specific extensions of the generic |
| backlight code. With this enabled, the brightness keys on older |
| PowerBooks will be enabled so you can change the screen brightness. |
| Newer models should use an userspace daemon like pbbuttonsd. |
| |
| config PMAC_BACKLIGHT_LEGACY |
| bool "Provide legacy ioctl's on /dev/pmu for the backlight" |
| depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) |
| help |
| Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for |
| programs which use this old interface. New and updated programs |
| should use the backlight classes in sysfs. |
| |
| config ADB_MACIO |
| bool "Include MacIO (CHRP) ADB driver" |
| depends on ADB && PPC_CHRP && !PPC_PMAC64 |
| help |
| Say Y here to include direct support for the ADB controller in the |
| Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra |
| also includes a MESH II SCSI controller, DBDMA controller, VIA chip, |
| OpenPIC controller and two RS422/Geoports.) |
| |
| config INPUT_ADBHID |
| bool "Support for ADB input devices (keyboard, mice, ...)" |
| depends on ADB && INPUT=y |
| help |
| Say Y here if you want to have ADB (Apple Desktop Bus) HID devices |
| such as keyboards, mice, joysticks, trackpads or graphic tablets |
| handled by the input layer. If you say Y here, make sure to say Y to |
| the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV), |
| "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface |
| support" (CONFIG_INPUT_EVDEV) as well. |
| |
| If unsure, say Y. |
| |
| config MAC_EMUMOUSEBTN |
| bool "Support for mouse button 2+3 emulation" |
| depends on INPUT_ADBHID |
| help |
| This provides generic support for emulating the 2nd and 3rd mouse |
| button with keypresses. If you say Y here, the emulation is still |
| disabled by default. The emulation is controlled by these sysctl |
| entries: |
| /proc/sys/dev/mac_hid/mouse_button_emulation |
| /proc/sys/dev/mac_hid/mouse_button2_keycode |
| /proc/sys/dev/mac_hid/mouse_button3_keycode |
| |
| If you have an Apple machine with a 1-button mouse, say Y here. |
| |
| config THERM_WINDTUNNEL |
| tristate "Support for thermal management on Windtunnel G4s" |
| depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 |
| help |
| This driver provides some thermostat and fan control for the desktop |
| G4 "Windtunnel" |
| |
| config THERM_ADT746X |
| tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" |
| depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 |
| help |
| This driver provides some thermostat and fan control for the |
| iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty |
| better fan behaviour by default, and some manual control. |
| |
| config THERM_PM72 |
| tristate "Support for thermal management on PowerMac G5" |
| depends on I2C && I2C_POWERMAC && PPC_PMAC64 |
| help |
| This driver provides thermostat and fan control for the desktop |
| G5 machines. |
| |
| config WINDFARM |
| tristate "New PowerMac thermal control infrastructure" |
| depends on PPC |
| |
| config WINDFARM_PM81 |
| tristate "Support for thermal management on iMac G5" |
| depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU |
| select I2C_POWERMAC |
| help |
| This driver provides thermal control for the iMacG5 |
| |
| config WINDFARM_PM91 |
| tristate "Support for thermal management on PowerMac9,1" |
| depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU |
| select I2C_POWERMAC |
| help |
| This driver provides thermal control for the PowerMac9,1 |
| which is the recent (SMU based) single CPU desktop G5 |
| |
| config WINDFARM_PM112 |
| tristate "Support for thermal management on PowerMac11,2" |
| depends on WINDFARM && I2C && PMAC_SMU |
| select I2C_POWERMAC |
| help |
| This driver provides thermal control for the PowerMac11,2 |
| which are the recent dual and quad G5 machines using the |
| 970MP dual-core processor. |
| |
| config ANSLCD |
| tristate "Support for ANS LCD display" |
| depends on ADB_CUDA && PPC_PMAC |
| |
| endmenu |