| /* |
| * drivers/media/video/tcm825x.c |
| * |
| * TCM825X camera sensor driver. |
| * |
| * Copyright (C) 2007 Nokia Corporation. |
| * |
| * Contact: Sakari Ailus <sakari.ailus@nokia.com> |
| * |
| * Based on code from David Cohen <david.cohen@indt.org.br> |
| * |
| * This driver was based on ov9640 sensor driver from MontaVista |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| */ |
| |
| #include <linux/i2c.h> |
| #include <media/v4l2-int-device.h> |
| |
| #include "tcm825x.h" |
| |
| /* |
| * The sensor has two fps modes: the lower one just gives half the fps |
| * at the same xclk than the high one. |
| */ |
| #define MAX_FPS 30 |
| #define MIN_FPS 8 |
| #define MAX_HALF_FPS (MAX_FPS / 2) |
| #define HIGH_FPS_MODE_LOWER_LIMIT 14 |
| #define DEFAULT_FPS MAX_HALF_FPS |
| |
| struct tcm825x_sensor { |
| const struct tcm825x_platform_data *platform_data; |
| struct v4l2_int_device *v4l2_int_device; |
| struct i2c_client *i2c_client; |
| struct v4l2_pix_format pix; |
| struct v4l2_fract timeperframe; |
| }; |
| |
| /* list of image formats supported by TCM825X sensor */ |
| static const struct v4l2_fmtdesc tcm825x_formats[] = { |
| { |
| .description = "YUYV (YUV 4:2:2), packed", |
| .pixelformat = V4L2_PIX_FMT_UYVY, |
| }, { |
| /* Note: V4L2 defines RGB565 as: |
| * |
| * Byte 0 Byte 1 |
| * g2 g1 g0 r4 r3 r2 r1 r0 b4 b3 b2 b1 b0 g5 g4 g3 |
| * |
| * We interpret RGB565 as: |
| * |
| * Byte 0 Byte 1 |
| * g2 g1 g0 b4 b3 b2 b1 b0 r4 r3 r2 r1 r0 g5 g4 g3 |
| */ |
| .description = "RGB565, le", |
| .pixelformat = V4L2_PIX_FMT_RGB565, |
| }, |
| }; |
| |
| #define TCM825X_NUM_CAPTURE_FORMATS ARRAY_SIZE(tcm825x_formats) |
| |
| /* |
| * TCM825X register configuration for all combinations of pixel format and |
| * image size |
| */ |
| static const struct tcm825x_reg subqcif = { 0x20, TCM825X_PICSIZ }; |
| static const struct tcm825x_reg qcif = { 0x18, TCM825X_PICSIZ }; |
| static const struct tcm825x_reg cif = { 0x14, TCM825X_PICSIZ }; |
| static const struct tcm825x_reg qqvga = { 0x0c, TCM825X_PICSIZ }; |
| static const struct tcm825x_reg qvga = { 0x04, TCM825X_PICSIZ }; |
| static const struct tcm825x_reg vga = { 0x00, TCM825X_PICSIZ }; |
| |
| static const struct tcm825x_reg yuv422 = { 0x00, TCM825X_PICFMT }; |
| static const struct tcm825x_reg rgb565 = { 0x02, TCM825X_PICFMT }; |
| |
| /* Our own specific controls */ |
| #define V4L2_CID_ALC V4L2_CID_PRIVATE_BASE |
| #define V4L2_CID_H_EDGE_EN V4L2_CID_PRIVATE_BASE + 1 |
| #define V4L2_CID_V_EDGE_EN V4L2_CID_PRIVATE_BASE + 2 |
| #define V4L2_CID_LENS V4L2_CID_PRIVATE_BASE + 3 |
| #define V4L2_CID_MAX_EXPOSURE_TIME V4L2_CID_PRIVATE_BASE + 4 |
| #define V4L2_CID_LAST_PRIV V4L2_CID_MAX_EXPOSURE_TIME |
| |
| /* Video controls */ |
| static struct vcontrol { |
| struct v4l2_queryctrl qc; |
| u16 reg; |
| u16 start_bit; |
| } video_control[] = { |
| { |
| { |
| .id = V4L2_CID_GAIN, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Gain", |
| .minimum = 0, |
| .maximum = 63, |
| .step = 1, |
| }, |
| .reg = TCM825X_AG, |
| .start_bit = 0, |
| }, |
| { |
| { |
| .id = V4L2_CID_RED_BALANCE, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Red Balance", |
| .minimum = 0, |
| .maximum = 255, |
| .step = 1, |
| }, |
| .reg = TCM825X_MRG, |
| .start_bit = 0, |
| }, |
| { |
| { |
| .id = V4L2_CID_BLUE_BALANCE, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Blue Balance", |
| .minimum = 0, |
| .maximum = 255, |
| .step = 1, |
| }, |
| .reg = TCM825X_MBG, |
| .start_bit = 0, |
| }, |
| { |
| { |
| .id = V4L2_CID_AUTO_WHITE_BALANCE, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Auto White Balance", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 0, |
| }, |
| .reg = TCM825X_AWBSW, |
| .start_bit = 7, |
| }, |
| { |
| { |
| .id = V4L2_CID_EXPOSURE, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Exposure Time", |
| .minimum = 0, |
| .maximum = 0x1fff, |
| .step = 1, |
| }, |
| .reg = TCM825X_ESRSPD_U, |
| .start_bit = 0, |
| }, |
| { |
| { |
| .id = V4L2_CID_HFLIP, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Mirror Image", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 0, |
| }, |
| .reg = TCM825X_H_INV, |
| .start_bit = 6, |
| }, |
| { |
| { |
| .id = V4L2_CID_VFLIP, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Vertical Flip", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 0, |
| }, |
| .reg = TCM825X_V_INV, |
| .start_bit = 7, |
| }, |
| /* Private controls */ |
| { |
| { |
| .id = V4L2_CID_ALC, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Auto Luminance Control", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 0, |
| }, |
| .reg = TCM825X_ALCSW, |
| .start_bit = 7, |
| }, |
| { |
| { |
| .id = V4L2_CID_H_EDGE_EN, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Horizontal Edge Enhancement", |
| .minimum = 0, |
| .maximum = 0xff, |
| .step = 1, |
| }, |
| .reg = TCM825X_HDTG, |
| .start_bit = 0, |
| }, |
| { |
| { |
| .id = V4L2_CID_V_EDGE_EN, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Vertical Edge Enhancement", |
| .minimum = 0, |
| .maximum = 0xff, |
| .step = 1, |
| }, |
| .reg = TCM825X_VDTG, |
| .start_bit = 0, |
| }, |
| { |
| { |
| .id = V4L2_CID_LENS, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Lens Shading Compensation", |
| .minimum = 0, |
| .maximum = 0x3f, |
| .step = 1, |
| }, |
| .reg = TCM825X_LENS, |
| .start_bit = 0, |
| }, |
| { |
| { |
| .id = V4L2_CID_MAX_EXPOSURE_TIME, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Maximum Exposure Time", |
| .minimum = 0, |
| .maximum = 0x3, |
| .step = 1, |
| }, |
| .reg = TCM825X_ESRLIM, |
| .start_bit = 5, |
| }, |
| }; |
| |
| |
| static const struct tcm825x_reg *tcm825x_siz_reg[NUM_IMAGE_SIZES] = |
| { &subqcif, &qqvga, &qcif, &qvga, &cif, &vga }; |
| |
| static const struct tcm825x_reg *tcm825x_fmt_reg[NUM_PIXEL_FORMATS] = |
| { &yuv422, &rgb565 }; |
| |
| /* |
| * Read a value from a register in an TCM825X sensor device. The value is |
| * returned in 'val'. |
| * Returns zero if successful, or non-zero otherwise. |
| */ |
| static int tcm825x_read_reg(struct i2c_client *client, int reg) |
| { |
| int err; |
| struct i2c_msg msg[2]; |
| u8 reg_buf, data_buf = 0; |
| |
| if (!client->adapter) |
| return -ENODEV; |
| |
| msg[0].addr = client->addr; |
| msg[0].flags = 0; |
| msg[0].len = 1; |
| msg[0].buf = ®_buf; |
| msg[1].addr = client->addr; |
| msg[1].flags = I2C_M_RD; |
| msg[1].len = 1; |
| msg[1].buf = &data_buf; |
| |
| reg_buf = reg; |
| |
| err = i2c_transfer(client->adapter, msg, 2); |
| if (err < 0) |
| return err; |
| return data_buf; |
| } |
| |
| /* |
| * Write a value to a register in an TCM825X sensor device. |
| * Returns zero if successful, or non-zero otherwise. |
| */ |
| static int tcm825x_write_reg(struct i2c_client *client, u8 reg, u8 val) |
| { |
| int err; |
| struct i2c_msg msg[1]; |
| unsigned char data[2]; |
| |
| if (!client->adapter) |
| return -ENODEV; |
| |
| msg->addr = client->addr; |
| msg->flags = 0; |
| msg->len = 2; |
| msg->buf = data; |
| data[0] = reg; |
| data[1] = val; |
| err = i2c_transfer(client->adapter, msg, 1); |
| if (err >= 0) |
| return 0; |
| return err; |
| } |
| |
| static int __tcm825x_write_reg_mask(struct i2c_client *client, |
| u8 reg, u8 val, u8 mask) |
| { |
| int rc; |
| |
| /* need to do read - modify - write */ |
| rc = tcm825x_read_reg(client, reg); |
| if (rc < 0) |
| return rc; |
| |
| rc &= (~mask); /* Clear the masked bits */ |
| val &= mask; /* Enforce mask on value */ |
| val |= rc; |
| |
| /* write the new value to the register */ |
| rc = tcm825x_write_reg(client, reg, val); |
| if (rc) |
| return rc; |
| |
| return 0; |
| } |
| |
| #define tcm825x_write_reg_mask(client, regmask, val) \ |
| __tcm825x_write_reg_mask(client, TCM825X_ADDR((regmask)), val, \ |
| TCM825X_MASK((regmask))) |
| |
| |
| /* |
| * Initialize a list of TCM825X registers. |
| * The list of registers is terminated by the pair of values |
| * { TCM825X_REG_TERM, TCM825X_VAL_TERM }. |
| * Returns zero if successful, or non-zero otherwise. |
| */ |
| static int tcm825x_write_default_regs(struct i2c_client *client, |
| const struct tcm825x_reg *reglist) |
| { |
| int err; |
| const struct tcm825x_reg *next = reglist; |
| |
| while (!((next->reg == TCM825X_REG_TERM) |
| && (next->val == TCM825X_VAL_TERM))) { |
| err = tcm825x_write_reg(client, next->reg, next->val); |
| if (err) { |
| dev_err(&client->dev, "register writing failed\n"); |
| return err; |
| } |
| next++; |
| } |
| |
| return 0; |
| } |
| |
| static struct vcontrol *find_vctrl(int id) |
| { |
| int i; |
| |
| if (id < V4L2_CID_BASE) |
| return NULL; |
| |
| for (i = 0; i < ARRAY_SIZE(video_control); i++) |
| if (video_control[i].qc.id == id) |
| return &video_control[i]; |
| |
| return NULL; |
| } |
| |
| /* |
| * Find the best match for a requested image capture size. The best match |
| * is chosen as the nearest match that has the same number or fewer pixels |
| * as the requested size, or the smallest image size if the requested size |
| * has fewer pixels than the smallest image. |
| */ |
| static enum image_size tcm825x_find_size(struct v4l2_int_device *s, |
| unsigned int width, |
| unsigned int height) |
| { |
| enum image_size isize; |
| unsigned long pixels = width * height; |
| struct tcm825x_sensor *sensor = s->priv; |
| |
| for (isize = subQCIF; isize < VGA; isize++) { |
| if (tcm825x_sizes[isize + 1].height |
| * tcm825x_sizes[isize + 1].width > pixels) { |
| dev_dbg(&sensor->i2c_client->dev, "size %d\n", isize); |
| |
| return isize; |
| } |
| } |
| |
| dev_dbg(&sensor->i2c_client->dev, "format default VGA\n"); |
| |
| return VGA; |
| } |
| |
| /* |
| * Configure the TCM825X for current image size, pixel format, and |
| * frame period. fper is the frame period (in seconds) expressed as a |
| * fraction. Returns zero if successful, or non-zero otherwise. The |
| * actual frame period is returned in fper. |
| */ |
| static int tcm825x_configure(struct v4l2_int_device *s) |
| { |
| struct tcm825x_sensor *sensor = s->priv; |
| struct v4l2_pix_format *pix = &sensor->pix; |
| enum image_size isize = tcm825x_find_size(s, pix->width, pix->height); |
| struct v4l2_fract *fper = &sensor->timeperframe; |
| enum pixel_format pfmt; |
| int err; |
| u32 tgt_fps; |
| u8 val; |
| |
| /* common register initialization */ |
| err = tcm825x_write_default_regs( |
| sensor->i2c_client, sensor->platform_data->default_regs()); |
| if (err) |
| return err; |
| |
| /* configure image size */ |
| val = tcm825x_siz_reg[isize]->val; |
| dev_dbg(&sensor->i2c_client->dev, |
| "configuring image size %d\n", isize); |
| err = tcm825x_write_reg_mask(sensor->i2c_client, |
| tcm825x_siz_reg[isize]->reg, val); |
| if (err) |
| return err; |
| |
| /* configure pixel format */ |
| switch (pix->pixelformat) { |
| default: |
| case V4L2_PIX_FMT_RGB565: |
| pfmt = RGB565; |
| break; |
| case V4L2_PIX_FMT_UYVY: |
| pfmt = YUV422; |
| break; |
| } |
| |
| dev_dbg(&sensor->i2c_client->dev, |
| "configuring pixel format %d\n", pfmt); |
| val = tcm825x_fmt_reg[pfmt]->val; |
| |
| err = tcm825x_write_reg_mask(sensor->i2c_client, |
| tcm825x_fmt_reg[pfmt]->reg, val); |
| if (err) |
| return err; |
| |
| /* |
| * For frame rate < 15, the FPS reg (addr 0x02, bit 7) must be |
| * set. Frame rate will be halved from the normal. |
| */ |
| tgt_fps = fper->denominator / fper->numerator; |
| if (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) { |
| val = tcm825x_read_reg(sensor->i2c_client, 0x02); |
| val |= 0x80; |
| tcm825x_write_reg(sensor->i2c_client, 0x02, val); |
| } |
| |
| return 0; |
| } |
| |
| static int ioctl_queryctrl(struct v4l2_int_device *s, |
| struct v4l2_queryctrl *qc) |
| { |
| struct vcontrol *control; |
| |
| control = find_vctrl(qc->id); |
| |
| if (control == NULL) |
| return -EINVAL; |
| |
| *qc = control->qc; |
| |
| return 0; |
| } |
| |
| static int ioctl_g_ctrl(struct v4l2_int_device *s, |
| struct v4l2_control *vc) |
| { |
| struct tcm825x_sensor *sensor = s->priv; |
| struct i2c_client *client = sensor->i2c_client; |
| int val, r; |
| struct vcontrol *lvc; |
| |
| /* exposure time is special, spread accross 2 registers */ |
| if (vc->id == V4L2_CID_EXPOSURE) { |
| int val_lower, val_upper; |
| |
| val_upper = tcm825x_read_reg(client, |
| TCM825X_ADDR(TCM825X_ESRSPD_U)); |
| if (val_upper < 0) |
| return val_upper; |
| val_lower = tcm825x_read_reg(client, |
| TCM825X_ADDR(TCM825X_ESRSPD_L)); |
| if (val_lower < 0) |
| return val_lower; |
| |
| vc->value = ((val_upper & 0x1f) << 8) | (val_lower); |
| return 0; |
| } |
| |
| lvc = find_vctrl(vc->id); |
| if (lvc == NULL) |
| return -EINVAL; |
| |
| r = tcm825x_read_reg(client, TCM825X_ADDR(lvc->reg)); |
| if (r < 0) |
| return r; |
| val = r & TCM825X_MASK(lvc->reg); |
| val >>= lvc->start_bit; |
| |
| if (val < 0) |
| return val; |
| |
| if (vc->id == V4L2_CID_HFLIP || vc->id == V4L2_CID_VFLIP) |
| val ^= sensor->platform_data->is_upside_down(); |
| |
| vc->value = val; |
| return 0; |
| } |
| |
| static int ioctl_s_ctrl(struct v4l2_int_device *s, |
| struct v4l2_control *vc) |
| { |
| struct tcm825x_sensor *sensor = s->priv; |
| struct i2c_client *client = sensor->i2c_client; |
| struct vcontrol *lvc; |
| int val = vc->value; |
| |
| /* exposure time is special, spread accross 2 registers */ |
| if (vc->id == V4L2_CID_EXPOSURE) { |
| int val_lower, val_upper; |
| val_lower = val & TCM825X_MASK(TCM825X_ESRSPD_L); |
| val_upper = (val >> 8) & TCM825X_MASK(TCM825X_ESRSPD_U); |
| |
| if (tcm825x_write_reg_mask(client, |
| TCM825X_ESRSPD_U, val_upper)) |
| return -EIO; |
| |
| if (tcm825x_write_reg_mask(client, |
| TCM825X_ESRSPD_L, val_lower)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| lvc = find_vctrl(vc->id); |
| if (lvc == NULL) |
| return -EINVAL; |
| |
| if (vc->id == V4L2_CID_HFLIP || vc->id == V4L2_CID_VFLIP) |
| val ^= sensor->platform_data->is_upside_down(); |
| |
| val = val << lvc->start_bit; |
| if (tcm825x_write_reg_mask(client, lvc->reg, val)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int ioctl_enum_fmt_cap(struct v4l2_int_device *s, |
| struct v4l2_fmtdesc *fmt) |
| { |
| int index = fmt->index; |
| |
| switch (fmt->type) { |
| case V4L2_BUF_TYPE_VIDEO_CAPTURE: |
| if (index >= TCM825X_NUM_CAPTURE_FORMATS) |
| return -EINVAL; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| fmt->flags = tcm825x_formats[index].flags; |
| strlcpy(fmt->description, tcm825x_formats[index].description, |
| sizeof(fmt->description)); |
| fmt->pixelformat = tcm825x_formats[index].pixelformat; |
| |
| return 0; |
| } |
| |
| static int ioctl_try_fmt_cap(struct v4l2_int_device *s, |
| struct v4l2_format *f) |
| { |
| struct tcm825x_sensor *sensor = s->priv; |
| enum image_size isize; |
| int ifmt; |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| |
| isize = tcm825x_find_size(s, pix->width, pix->height); |
| dev_dbg(&sensor->i2c_client->dev, "isize = %d num_capture = %lu\n", |
| isize, (unsigned long)TCM825X_NUM_CAPTURE_FORMATS); |
| |
| pix->width = tcm825x_sizes[isize].width; |
| pix->height = tcm825x_sizes[isize].height; |
| |
| for (ifmt = 0; ifmt < TCM825X_NUM_CAPTURE_FORMATS; ifmt++) |
| if (pix->pixelformat == tcm825x_formats[ifmt].pixelformat) |
| break; |
| |
| if (ifmt == TCM825X_NUM_CAPTURE_FORMATS) |
| ifmt = 0; /* Default = YUV 4:2:2 */ |
| |
| pix->pixelformat = tcm825x_formats[ifmt].pixelformat; |
| pix->field = V4L2_FIELD_NONE; |
| pix->bytesperline = pix->width * TCM825X_BYTES_PER_PIXEL; |
| pix->sizeimage = pix->bytesperline * pix->height; |
| pix->priv = 0; |
| dev_dbg(&sensor->i2c_client->dev, "format = 0x%08x\n", |
| pix->pixelformat); |
| |
| switch (pix->pixelformat) { |
| case V4L2_PIX_FMT_UYVY: |
| default: |
| pix->colorspace = V4L2_COLORSPACE_JPEG; |
| break; |
| case V4L2_PIX_FMT_RGB565: |
| pix->colorspace = V4L2_COLORSPACE_SRGB; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int ioctl_s_fmt_cap(struct v4l2_int_device *s, |
| struct v4l2_format *f) |
| { |
| struct tcm825x_sensor *sensor = s->priv; |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| int rval; |
| |
| rval = ioctl_try_fmt_cap(s, f); |
| if (rval) |
| return rval; |
| |
| rval = tcm825x_configure(s); |
| |
| sensor->pix = *pix; |
| |
| return rval; |
| } |
| |
| static int ioctl_g_fmt_cap(struct v4l2_int_device *s, |
| struct v4l2_format *f) |
| { |
| struct tcm825x_sensor *sensor = s->priv; |
| |
| f->fmt.pix = sensor->pix; |
| |
| return 0; |
| } |
| |
| static int ioctl_g_parm(struct v4l2_int_device *s, |
| struct v4l2_streamparm *a) |
| { |
| struct tcm825x_sensor *sensor = s->priv; |
| struct v4l2_captureparm *cparm = &a->parm.capture; |
| |
| if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| |
| memset(a, 0, sizeof(*a)); |
| a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| |
| cparm->capability = V4L2_CAP_TIMEPERFRAME; |
| cparm->timeperframe = sensor->timeperframe; |
| |
| return 0; |
| } |
| |
| static int ioctl_s_parm(struct v4l2_int_device *s, |
| struct v4l2_streamparm *a) |
| { |
| struct tcm825x_sensor *sensor = s->priv; |
| struct v4l2_fract *timeperframe = &a->parm.capture.timeperframe; |
| u32 tgt_fps; /* target frames per secound */ |
| int rval; |
| |
| if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| |
| if ((timeperframe->numerator == 0) |
| || (timeperframe->denominator == 0)) { |
| timeperframe->denominator = DEFAULT_FPS; |
| timeperframe->numerator = 1; |
| } |
| |
| tgt_fps = timeperframe->denominator / timeperframe->numerator; |
| |
| if (tgt_fps > MAX_FPS) { |
| timeperframe->denominator = MAX_FPS; |
| timeperframe->numerator = 1; |
| } else if (tgt_fps < MIN_FPS) { |
| timeperframe->denominator = MIN_FPS; |
| timeperframe->numerator = 1; |
| } |
| |
| sensor->timeperframe = *timeperframe; |
| |
| rval = tcm825x_configure(s); |
| |
| return rval; |
| } |
| |
| static int ioctl_s_power(struct v4l2_int_device *s, int on) |
| { |
| struct tcm825x_sensor *sensor = s->priv; |
| |
| return sensor->platform_data->power_set(on); |
| } |
| |
| /* |
| * Given the image capture format in pix, the nominal frame period in |
| * timeperframe, calculate the required xclk frequency. |
| * |
| * TCM825X input frequency characteristics are: |
| * Minimum 11.9 MHz, Typical 24.57 MHz and maximum 25/27 MHz |
| */ |
| |
| static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p) |
| { |
| struct tcm825x_sensor *sensor = s->priv; |
| struct v4l2_fract *timeperframe = &sensor->timeperframe; |
| u32 tgt_xclk; /* target xclk */ |
| u32 tgt_fps; /* target frames per secound */ |
| int rval; |
| |
| rval = sensor->platform_data->ifparm(p); |
| if (rval) |
| return rval; |
| |
| tgt_fps = timeperframe->denominator / timeperframe->numerator; |
| |
| tgt_xclk = (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) ? |
| (2457 * tgt_fps) / MAX_HALF_FPS : |
| (2457 * tgt_fps) / MAX_FPS; |
| tgt_xclk *= 10000; |
| |
| tgt_xclk = min(tgt_xclk, (u32)TCM825X_XCLK_MAX); |
| tgt_xclk = max(tgt_xclk, (u32)TCM825X_XCLK_MIN); |
| |
| p->u.bt656.clock_curr = tgt_xclk; |
| |
| return 0; |
| } |
| |
| static int ioctl_g_needs_reset(struct v4l2_int_device *s, void *buf) |
| { |
| struct tcm825x_sensor *sensor = s->priv; |
| |
| return sensor->platform_data->needs_reset(s, buf, &sensor->pix); |
| } |
| |
| static int ioctl_reset(struct v4l2_int_device *s) |
| { |
| return -EBUSY; |
| } |
| |
| static int ioctl_init(struct v4l2_int_device *s) |
| { |
| return tcm825x_configure(s); |
| } |
| |
| static int ioctl_dev_exit(struct v4l2_int_device *s) |
| { |
| return 0; |
| } |
| |
| static int ioctl_dev_init(struct v4l2_int_device *s) |
| { |
| struct tcm825x_sensor *sensor = s->priv; |
| int r; |
| |
| r = tcm825x_read_reg(sensor->i2c_client, 0x01); |
| if (r < 0) |
| return r; |
| if (r == 0) { |
| dev_err(&sensor->i2c_client->dev, "device not detected\n"); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static struct v4l2_int_ioctl_desc tcm825x_ioctl_desc[] = { |
| { vidioc_int_dev_init_num, |
| (v4l2_int_ioctl_func *)ioctl_dev_init }, |
| { vidioc_int_dev_exit_num, |
| (v4l2_int_ioctl_func *)ioctl_dev_exit }, |
| { vidioc_int_s_power_num, |
| (v4l2_int_ioctl_func *)ioctl_s_power }, |
| { vidioc_int_g_ifparm_num, |
| (v4l2_int_ioctl_func *)ioctl_g_ifparm }, |
| { vidioc_int_g_needs_reset_num, |
| (v4l2_int_ioctl_func *)ioctl_g_needs_reset }, |
| { vidioc_int_reset_num, |
| (v4l2_int_ioctl_func *)ioctl_reset }, |
| { vidioc_int_init_num, |
| (v4l2_int_ioctl_func *)ioctl_init }, |
| { vidioc_int_enum_fmt_cap_num, |
| (v4l2_int_ioctl_func *)ioctl_enum_fmt_cap }, |
| { vidioc_int_try_fmt_cap_num, |
| (v4l2_int_ioctl_func *)ioctl_try_fmt_cap }, |
| { vidioc_int_g_fmt_cap_num, |
| (v4l2_int_ioctl_func *)ioctl_g_fmt_cap }, |
| { vidioc_int_s_fmt_cap_num, |
| (v4l2_int_ioctl_func *)ioctl_s_fmt_cap }, |
| { vidioc_int_g_parm_num, |
| (v4l2_int_ioctl_func *)ioctl_g_parm }, |
| { vidioc_int_s_parm_num, |
| (v4l2_int_ioctl_func *)ioctl_s_parm }, |
| { vidioc_int_queryctrl_num, |
| (v4l2_int_ioctl_func *)ioctl_queryctrl }, |
| { vidioc_int_g_ctrl_num, |
| (v4l2_int_ioctl_func *)ioctl_g_ctrl }, |
| { vidioc_int_s_ctrl_num, |
| (v4l2_int_ioctl_func *)ioctl_s_ctrl }, |
| }; |
| |
| static struct v4l2_int_slave tcm825x_slave = { |
| .ioctls = tcm825x_ioctl_desc, |
| .num_ioctls = ARRAY_SIZE(tcm825x_ioctl_desc), |
| }; |
| |
| static struct tcm825x_sensor tcm825x; |
| |
| static struct v4l2_int_device tcm825x_int_device = { |
| .module = THIS_MODULE, |
| .name = TCM825X_NAME, |
| .priv = &tcm825x, |
| .type = v4l2_int_type_slave, |
| .u = { |
| .slave = &tcm825x_slave, |
| }, |
| }; |
| |
| static int tcm825x_probe(struct i2c_client *client, |
| const struct i2c_device_id *did) |
| { |
| struct tcm825x_sensor *sensor = &tcm825x; |
| int rval; |
| |
| if (i2c_get_clientdata(client)) |
| return -EBUSY; |
| |
| sensor->platform_data = client->dev.platform_data; |
| |
| if (sensor->platform_data == NULL |
| || !sensor->platform_data->is_okay()) |
| return -ENODEV; |
| |
| sensor->v4l2_int_device = &tcm825x_int_device; |
| |
| sensor->i2c_client = client; |
| i2c_set_clientdata(client, sensor); |
| |
| /* Make the default capture format QVGA RGB565 */ |
| sensor->pix.width = tcm825x_sizes[QVGA].width; |
| sensor->pix.height = tcm825x_sizes[QVGA].height; |
| sensor->pix.pixelformat = V4L2_PIX_FMT_RGB565; |
| |
| rval = v4l2_int_device_register(sensor->v4l2_int_device); |
| if (rval) |
| i2c_set_clientdata(client, NULL); |
| |
| return rval; |
| } |
| |
| static int __exit tcm825x_remove(struct i2c_client *client) |
| { |
| struct tcm825x_sensor *sensor = i2c_get_clientdata(client); |
| |
| if (!client->adapter) |
| return -ENODEV; /* our client isn't attached */ |
| |
| v4l2_int_device_unregister(sensor->v4l2_int_device); |
| i2c_set_clientdata(client, NULL); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id tcm825x_id[] = { |
| { "tcm825x", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, tcm825x_id); |
| |
| static struct i2c_driver tcm825x_i2c_driver = { |
| .driver = { |
| .name = TCM825X_NAME, |
| }, |
| .probe = tcm825x_probe, |
| .remove = __exit_p(tcm825x_remove), |
| .id_table = tcm825x_id, |
| }; |
| |
| static struct tcm825x_sensor tcm825x = { |
| .timeperframe = { |
| .numerator = 1, |
| .denominator = DEFAULT_FPS, |
| }, |
| }; |
| |
| static int __init tcm825x_init(void) |
| { |
| int rval; |
| |
| rval = i2c_add_driver(&tcm825x_i2c_driver); |
| if (rval) |
| printk(KERN_INFO "%s: failed registering " TCM825X_NAME "\n", |
| __func__); |
| |
| return rval; |
| } |
| |
| static void __exit tcm825x_exit(void) |
| { |
| i2c_del_driver(&tcm825x_i2c_driver); |
| } |
| |
| /* |
| * FIXME: Menelaus isn't ready (?) at module_init stage, so use |
| * late_initcall for now. |
| */ |
| late_initcall(tcm825x_init); |
| module_exit(tcm825x_exit); |
| |
| MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>"); |
| MODULE_DESCRIPTION("TCM825x camera sensor driver"); |
| MODULE_LICENSE("GPL"); |