| /* |
| * Copyright 2010 Google Inc. All Rights Reserved. |
| * Author: dlaurie@google.com (Duncan Laurie) |
| * |
| * Re-worked to expose sysfs APIs by mikew@google.com (Mike Waychison) |
| * |
| * EFI SMI interface for Google platforms |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/spinlock.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmapool.h> |
| #include <linux/fs.h> |
| #include <linux/slab.h> |
| #include <linux/ioctl.h> |
| #include <linux/acpi.h> |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| #include <linux/dmi.h> |
| #include <linux/kdebug.h> |
| #include <linux/reboot.h> |
| #include <linux/efi.h> |
| #include <linux/module.h> |
| #include <linux/ucs2_string.h> |
| |
| #define GSMI_SHUTDOWN_CLEAN 0 /* Clean Shutdown */ |
| /* TODO(mikew@google.com): Tie in HARDLOCKUP_DETECTOR with NMIWDT */ |
| #define GSMI_SHUTDOWN_NMIWDT 1 /* NMI Watchdog */ |
| #define GSMI_SHUTDOWN_PANIC 2 /* Panic */ |
| #define GSMI_SHUTDOWN_OOPS 3 /* Oops */ |
| #define GSMI_SHUTDOWN_DIE 4 /* Die -- No longer meaningful */ |
| #define GSMI_SHUTDOWN_MCE 5 /* Machine Check */ |
| #define GSMI_SHUTDOWN_SOFTWDT 6 /* Software Watchdog */ |
| #define GSMI_SHUTDOWN_MBE 7 /* Uncorrected ECC */ |
| #define GSMI_SHUTDOWN_TRIPLE 8 /* Triple Fault */ |
| |
| #define DRIVER_VERSION "1.0" |
| #define GSMI_GUID_SIZE 16 |
| #define GSMI_BUF_SIZE 1024 |
| #define GSMI_BUF_ALIGN sizeof(u64) |
| #define GSMI_CALLBACK 0xef |
| |
| /* SMI return codes */ |
| #define GSMI_SUCCESS 0x00 |
| #define GSMI_UNSUPPORTED2 0x03 |
| #define GSMI_LOG_FULL 0x0b |
| #define GSMI_VAR_NOT_FOUND 0x0e |
| #define GSMI_HANDSHAKE_SPIN 0x7d |
| #define GSMI_HANDSHAKE_CF 0x7e |
| #define GSMI_HANDSHAKE_NONE 0x7f |
| #define GSMI_INVALID_PARAMETER 0x82 |
| #define GSMI_UNSUPPORTED 0x83 |
| #define GSMI_BUFFER_TOO_SMALL 0x85 |
| #define GSMI_NOT_READY 0x86 |
| #define GSMI_DEVICE_ERROR 0x87 |
| #define GSMI_NOT_FOUND 0x8e |
| |
| #define QUIRKY_BOARD_HASH 0x78a30a50 |
| |
| /* Internally used commands passed to the firmware */ |
| #define GSMI_CMD_GET_NVRAM_VAR 0x01 |
| #define GSMI_CMD_GET_NEXT_VAR 0x02 |
| #define GSMI_CMD_SET_NVRAM_VAR 0x03 |
| #define GSMI_CMD_SET_EVENT_LOG 0x08 |
| #define GSMI_CMD_CLEAR_EVENT_LOG 0x09 |
| #define GSMI_CMD_CLEAR_CONFIG 0x20 |
| #define GSMI_CMD_HANDSHAKE_TYPE 0xC1 |
| |
| /* Magic entry type for kernel events */ |
| #define GSMI_LOG_ENTRY_TYPE_KERNEL 0xDEAD |
| |
| /* SMI buffers must be in 32bit physical address space */ |
| struct gsmi_buf { |
| u8 *start; /* start of buffer */ |
| size_t length; /* length of buffer */ |
| dma_addr_t handle; /* dma allocation handle */ |
| u32 address; /* physical address of buffer */ |
| }; |
| |
| struct gsmi_device { |
| struct platform_device *pdev; /* platform device */ |
| struct gsmi_buf *name_buf; /* variable name buffer */ |
| struct gsmi_buf *data_buf; /* generic data buffer */ |
| struct gsmi_buf *param_buf; /* parameter buffer */ |
| spinlock_t lock; /* serialize access to SMIs */ |
| u16 smi_cmd; /* SMI command port */ |
| int handshake_type; /* firmware handler interlock type */ |
| struct dma_pool *dma_pool; /* DMA buffer pool */ |
| } gsmi_dev; |
| |
| /* Packed structures for communicating with the firmware */ |
| struct gsmi_nvram_var_param { |
| efi_guid_t guid; |
| u32 name_ptr; |
| u32 attributes; |
| u32 data_len; |
| u32 data_ptr; |
| } __packed; |
| |
| struct gsmi_get_next_var_param { |
| u8 guid[GSMI_GUID_SIZE]; |
| u32 name_ptr; |
| u32 name_len; |
| } __packed; |
| |
| struct gsmi_set_eventlog_param { |
| u32 data_ptr; |
| u32 data_len; |
| u32 type; |
| } __packed; |
| |
| /* Event log formats */ |
| struct gsmi_log_entry_type_1 { |
| u16 type; |
| u32 instance; |
| } __packed; |
| |
| |
| /* |
| * Some platforms don't have explicit SMI handshake |
| * and need to wait for SMI to complete. |
| */ |
| #define GSMI_DEFAULT_SPINCOUNT 0x10000 |
| static unsigned int spincount = GSMI_DEFAULT_SPINCOUNT; |
| module_param(spincount, uint, 0600); |
| MODULE_PARM_DESC(spincount, |
| "The number of loop iterations to use when using the spin handshake."); |
| |
| static struct gsmi_buf *gsmi_buf_alloc(void) |
| { |
| struct gsmi_buf *smibuf; |
| |
| smibuf = kzalloc(sizeof(*smibuf), GFP_KERNEL); |
| if (!smibuf) { |
| printk(KERN_ERR "gsmi: out of memory\n"); |
| return NULL; |
| } |
| |
| /* allocate buffer in 32bit address space */ |
| smibuf->start = dma_pool_alloc(gsmi_dev.dma_pool, GFP_KERNEL, |
| &smibuf->handle); |
| if (!smibuf->start) { |
| printk(KERN_ERR "gsmi: failed to allocate name buffer\n"); |
| kfree(smibuf); |
| return NULL; |
| } |
| |
| /* fill in the buffer handle */ |
| smibuf->length = GSMI_BUF_SIZE; |
| smibuf->address = (u32)virt_to_phys(smibuf->start); |
| |
| return smibuf; |
| } |
| |
| static void gsmi_buf_free(struct gsmi_buf *smibuf) |
| { |
| if (smibuf) { |
| if (smibuf->start) |
| dma_pool_free(gsmi_dev.dma_pool, smibuf->start, |
| smibuf->handle); |
| kfree(smibuf); |
| } |
| } |
| |
| /* |
| * Make a call to gsmi func(sub). GSMI error codes are translated to |
| * in-kernel errnos (0 on success, -ERRNO on error). |
| */ |
| static int gsmi_exec(u8 func, u8 sub) |
| { |
| u16 cmd = (sub << 8) | func; |
| u16 result = 0; |
| int rc = 0; |
| |
| /* |
| * AH : Subfunction number |
| * AL : Function number |
| * EBX : Parameter block address |
| * DX : SMI command port |
| * |
| * Three protocols here. See also the comment in gsmi_init(). |
| */ |
| if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_CF) { |
| /* |
| * If handshake_type == HANDSHAKE_CF then set CF on the |
| * way in and wait for the handler to clear it; this avoids |
| * corrupting register state on those chipsets which have |
| * a delay between writing the SMI trigger register and |
| * entering SMM. |
| */ |
| asm volatile ( |
| "stc\n" |
| "outb %%al, %%dx\n" |
| "1: jc 1b\n" |
| : "=a" (result) |
| : "0" (cmd), |
| "d" (gsmi_dev.smi_cmd), |
| "b" (gsmi_dev.param_buf->address) |
| : "memory", "cc" |
| ); |
| } else if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_SPIN) { |
| /* |
| * If handshake_type == HANDSHAKE_SPIN we spin a |
| * hundred-ish usecs to ensure the SMI has triggered. |
| */ |
| asm volatile ( |
| "outb %%al, %%dx\n" |
| "1: loop 1b\n" |
| : "=a" (result) |
| : "0" (cmd), |
| "d" (gsmi_dev.smi_cmd), |
| "b" (gsmi_dev.param_buf->address), |
| "c" (spincount) |
| : "memory", "cc" |
| ); |
| } else { |
| /* |
| * If handshake_type == HANDSHAKE_NONE we do nothing; |
| * either we don't need to or it's legacy firmware that |
| * doesn't understand the CF protocol. |
| */ |
| asm volatile ( |
| "outb %%al, %%dx\n\t" |
| : "=a" (result) |
| : "0" (cmd), |
| "d" (gsmi_dev.smi_cmd), |
| "b" (gsmi_dev.param_buf->address) |
| : "memory", "cc" |
| ); |
| } |
| |
| /* check return code from SMI handler */ |
| switch (result) { |
| case GSMI_SUCCESS: |
| break; |
| case GSMI_VAR_NOT_FOUND: |
| /* not really an error, but let the caller know */ |
| rc = 1; |
| break; |
| case GSMI_INVALID_PARAMETER: |
| printk(KERN_ERR "gsmi: exec 0x%04x: Invalid parameter\n", cmd); |
| rc = -EINVAL; |
| break; |
| case GSMI_BUFFER_TOO_SMALL: |
| printk(KERN_ERR "gsmi: exec 0x%04x: Buffer too small\n", cmd); |
| rc = -ENOMEM; |
| break; |
| case GSMI_UNSUPPORTED: |
| case GSMI_UNSUPPORTED2: |
| if (sub != GSMI_CMD_HANDSHAKE_TYPE) |
| printk(KERN_ERR "gsmi: exec 0x%04x: Not supported\n", |
| cmd); |
| rc = -ENOSYS; |
| break; |
| case GSMI_NOT_READY: |
| printk(KERN_ERR "gsmi: exec 0x%04x: Not ready\n", cmd); |
| rc = -EBUSY; |
| break; |
| case GSMI_DEVICE_ERROR: |
| printk(KERN_ERR "gsmi: exec 0x%04x: Device error\n", cmd); |
| rc = -EFAULT; |
| break; |
| case GSMI_NOT_FOUND: |
| printk(KERN_ERR "gsmi: exec 0x%04x: Data not found\n", cmd); |
| rc = -ENOENT; |
| break; |
| case GSMI_LOG_FULL: |
| printk(KERN_ERR "gsmi: exec 0x%04x: Log full\n", cmd); |
| rc = -ENOSPC; |
| break; |
| case GSMI_HANDSHAKE_CF: |
| case GSMI_HANDSHAKE_SPIN: |
| case GSMI_HANDSHAKE_NONE: |
| rc = result; |
| break; |
| default: |
| printk(KERN_ERR "gsmi: exec 0x%04x: Unknown error 0x%04x\n", |
| cmd, result); |
| rc = -ENXIO; |
| } |
| |
| return rc; |
| } |
| |
| static efi_status_t gsmi_get_variable(efi_char16_t *name, |
| efi_guid_t *vendor, u32 *attr, |
| unsigned long *data_size, |
| void *data) |
| { |
| struct gsmi_nvram_var_param param = { |
| .name_ptr = gsmi_dev.name_buf->address, |
| .data_ptr = gsmi_dev.data_buf->address, |
| .data_len = (u32)*data_size, |
| }; |
| efi_status_t ret = EFI_SUCCESS; |
| unsigned long flags; |
| size_t name_len = ucs2_strnlen(name, GSMI_BUF_SIZE / 2); |
| int rc; |
| |
| if (name_len >= GSMI_BUF_SIZE / 2) |
| return EFI_BAD_BUFFER_SIZE; |
| |
| spin_lock_irqsave(&gsmi_dev.lock, flags); |
| |
| /* Vendor guid */ |
| memcpy(¶m.guid, vendor, sizeof(param.guid)); |
| |
| /* variable name, already in UTF-16 */ |
| memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length); |
| memcpy(gsmi_dev.name_buf->start, name, name_len * 2); |
| |
| /* data pointer */ |
| memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length); |
| |
| /* parameter buffer */ |
| memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length); |
| memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param)); |
| |
| rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NVRAM_VAR); |
| if (rc < 0) { |
| printk(KERN_ERR "gsmi: Get Variable failed\n"); |
| ret = EFI_LOAD_ERROR; |
| } else if (rc == 1) { |
| /* variable was not found */ |
| ret = EFI_NOT_FOUND; |
| } else { |
| /* Get the arguments back */ |
| memcpy(¶m, gsmi_dev.param_buf->start, sizeof(param)); |
| |
| /* The size reported is the min of all of our buffers */ |
| *data_size = min_t(unsigned long, *data_size, |
| gsmi_dev.data_buf->length); |
| *data_size = min_t(unsigned long, *data_size, param.data_len); |
| |
| /* Copy data back to return buffer. */ |
| memcpy(data, gsmi_dev.data_buf->start, *data_size); |
| |
| /* All variables are have the following attributes */ |
| *attr = EFI_VARIABLE_NON_VOLATILE | |
| EFI_VARIABLE_BOOTSERVICE_ACCESS | |
| EFI_VARIABLE_RUNTIME_ACCESS; |
| } |
| |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); |
| |
| return ret; |
| } |
| |
| static efi_status_t gsmi_get_next_variable(unsigned long *name_size, |
| efi_char16_t *name, |
| efi_guid_t *vendor) |
| { |
| struct gsmi_get_next_var_param param = { |
| .name_ptr = gsmi_dev.name_buf->address, |
| .name_len = gsmi_dev.name_buf->length, |
| }; |
| efi_status_t ret = EFI_SUCCESS; |
| int rc; |
| unsigned long flags; |
| |
| /* For the moment, only support buffers that exactly match in size */ |
| if (*name_size != GSMI_BUF_SIZE) |
| return EFI_BAD_BUFFER_SIZE; |
| |
| /* Let's make sure the thing is at least null-terminated */ |
| if (ucs2_strnlen(name, GSMI_BUF_SIZE / 2) == GSMI_BUF_SIZE / 2) |
| return EFI_INVALID_PARAMETER; |
| |
| spin_lock_irqsave(&gsmi_dev.lock, flags); |
| |
| /* guid */ |
| memcpy(¶m.guid, vendor, sizeof(param.guid)); |
| |
| /* variable name, already in UTF-16 */ |
| memcpy(gsmi_dev.name_buf->start, name, *name_size); |
| |
| /* parameter buffer */ |
| memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length); |
| memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param)); |
| |
| rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NEXT_VAR); |
| if (rc < 0) { |
| printk(KERN_ERR "gsmi: Get Next Variable Name failed\n"); |
| ret = EFI_LOAD_ERROR; |
| } else if (rc == 1) { |
| /* variable not found -- end of list */ |
| ret = EFI_NOT_FOUND; |
| } else { |
| /* copy variable data back to return buffer */ |
| memcpy(¶m, gsmi_dev.param_buf->start, sizeof(param)); |
| |
| /* Copy the name back */ |
| memcpy(name, gsmi_dev.name_buf->start, GSMI_BUF_SIZE); |
| *name_size = ucs2_strnlen(name, GSMI_BUF_SIZE / 2) * 2; |
| |
| /* copy guid to return buffer */ |
| memcpy(vendor, ¶m.guid, sizeof(param.guid)); |
| ret = EFI_SUCCESS; |
| } |
| |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); |
| |
| return ret; |
| } |
| |
| static efi_status_t gsmi_set_variable(efi_char16_t *name, |
| efi_guid_t *vendor, |
| u32 attr, |
| unsigned long data_size, |
| void *data) |
| { |
| struct gsmi_nvram_var_param param = { |
| .name_ptr = gsmi_dev.name_buf->address, |
| .data_ptr = gsmi_dev.data_buf->address, |
| .data_len = (u32)data_size, |
| .attributes = EFI_VARIABLE_NON_VOLATILE | |
| EFI_VARIABLE_BOOTSERVICE_ACCESS | |
| EFI_VARIABLE_RUNTIME_ACCESS, |
| }; |
| size_t name_len = ucs2_strnlen(name, GSMI_BUF_SIZE / 2); |
| efi_status_t ret = EFI_SUCCESS; |
| int rc; |
| unsigned long flags; |
| |
| if (name_len >= GSMI_BUF_SIZE / 2) |
| return EFI_BAD_BUFFER_SIZE; |
| |
| spin_lock_irqsave(&gsmi_dev.lock, flags); |
| |
| /* guid */ |
| memcpy(¶m.guid, vendor, sizeof(param.guid)); |
| |
| /* variable name, already in UTF-16 */ |
| memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length); |
| memcpy(gsmi_dev.name_buf->start, name, name_len * 2); |
| |
| /* data pointer */ |
| memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length); |
| memcpy(gsmi_dev.data_buf->start, data, data_size); |
| |
| /* parameter buffer */ |
| memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length); |
| memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param)); |
| |
| rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_NVRAM_VAR); |
| if (rc < 0) { |
| printk(KERN_ERR "gsmi: Set Variable failed\n"); |
| ret = EFI_INVALID_PARAMETER; |
| } |
| |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); |
| |
| return ret; |
| } |
| |
| static const struct efivar_operations efivar_ops = { |
| .get_variable = gsmi_get_variable, |
| .set_variable = gsmi_set_variable, |
| .get_next_variable = gsmi_get_next_variable, |
| }; |
| |
| static ssize_t eventlog_write(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *buf, loff_t pos, size_t count) |
| { |
| struct gsmi_set_eventlog_param param = { |
| .data_ptr = gsmi_dev.data_buf->address, |
| }; |
| int rc = 0; |
| unsigned long flags; |
| |
| /* Pull the type out */ |
| if (count < sizeof(u32)) |
| return -EINVAL; |
| param.type = *(u32 *)buf; |
| count -= sizeof(u32); |
| buf += sizeof(u32); |
| |
| /* The remaining buffer is the data payload */ |
| if (count > gsmi_dev.data_buf->length) |
| return -EINVAL; |
| param.data_len = count - sizeof(u32); |
| |
| spin_lock_irqsave(&gsmi_dev.lock, flags); |
| |
| /* data pointer */ |
| memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length); |
| memcpy(gsmi_dev.data_buf->start, buf, param.data_len); |
| |
| /* parameter buffer */ |
| memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length); |
| memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param)); |
| |
| rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG); |
| if (rc < 0) |
| printk(KERN_ERR "gsmi: Set Event Log failed\n"); |
| |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); |
| |
| return rc; |
| |
| } |
| |
| static struct bin_attribute eventlog_bin_attr = { |
| .attr = {.name = "append_to_eventlog", .mode = 0200}, |
| .write = eventlog_write, |
| }; |
| |
| static ssize_t gsmi_clear_eventlog_store(struct kobject *kobj, |
| struct kobj_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int rc; |
| unsigned long flags; |
| unsigned long val; |
| struct { |
| u32 percentage; |
| u32 data_type; |
| } param; |
| |
| rc = kstrtoul(buf, 0, &val); |
| if (rc) |
| return rc; |
| |
| /* |
| * Value entered is a percentage, 0 through 100, anything else |
| * is invalid. |
| */ |
| if (val > 100) |
| return -EINVAL; |
| |
| /* data_type here selects the smbios event log. */ |
| param.percentage = val; |
| param.data_type = 0; |
| |
| spin_lock_irqsave(&gsmi_dev.lock, flags); |
| |
| /* parameter buffer */ |
| memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length); |
| memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param)); |
| |
| rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_EVENT_LOG); |
| |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); |
| |
| if (rc) |
| return rc; |
| return count; |
| } |
| |
| static struct kobj_attribute gsmi_clear_eventlog_attr = { |
| .attr = {.name = "clear_eventlog", .mode = 0200}, |
| .store = gsmi_clear_eventlog_store, |
| }; |
| |
| static ssize_t gsmi_clear_config_store(struct kobject *kobj, |
| struct kobj_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int rc; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&gsmi_dev.lock, flags); |
| |
| /* clear parameter buffer */ |
| memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length); |
| |
| rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_CONFIG); |
| |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); |
| |
| if (rc) |
| return rc; |
| return count; |
| } |
| |
| static struct kobj_attribute gsmi_clear_config_attr = { |
| .attr = {.name = "clear_config", .mode = 0200}, |
| .store = gsmi_clear_config_store, |
| }; |
| |
| static const struct attribute *gsmi_attrs[] = { |
| &gsmi_clear_config_attr.attr, |
| &gsmi_clear_eventlog_attr.attr, |
| NULL, |
| }; |
| |
| static int gsmi_shutdown_reason(int reason) |
| { |
| struct gsmi_log_entry_type_1 entry = { |
| .type = GSMI_LOG_ENTRY_TYPE_KERNEL, |
| .instance = reason, |
| }; |
| struct gsmi_set_eventlog_param param = { |
| .data_len = sizeof(entry), |
| .type = 1, |
| }; |
| static int saved_reason; |
| int rc = 0; |
| unsigned long flags; |
| |
| /* avoid duplicate entries in the log */ |
| if (saved_reason & (1 << reason)) |
| return 0; |
| |
| spin_lock_irqsave(&gsmi_dev.lock, flags); |
| |
| saved_reason |= (1 << reason); |
| |
| /* data pointer */ |
| memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length); |
| memcpy(gsmi_dev.data_buf->start, &entry, sizeof(entry)); |
| |
| /* parameter buffer */ |
| param.data_ptr = gsmi_dev.data_buf->address; |
| memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length); |
| memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param)); |
| |
| rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG); |
| |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); |
| |
| if (rc < 0) |
| printk(KERN_ERR "gsmi: Log Shutdown Reason failed\n"); |
| else |
| printk(KERN_EMERG "gsmi: Log Shutdown Reason 0x%02x\n", |
| reason); |
| |
| return rc; |
| } |
| |
| static int gsmi_reboot_callback(struct notifier_block *nb, |
| unsigned long reason, void *arg) |
| { |
| gsmi_shutdown_reason(GSMI_SHUTDOWN_CLEAN); |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block gsmi_reboot_notifier = { |
| .notifier_call = gsmi_reboot_callback |
| }; |
| |
| static int gsmi_die_callback(struct notifier_block *nb, |
| unsigned long reason, void *arg) |
| { |
| if (reason == DIE_OOPS) |
| gsmi_shutdown_reason(GSMI_SHUTDOWN_OOPS); |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block gsmi_die_notifier = { |
| .notifier_call = gsmi_die_callback |
| }; |
| |
| static int gsmi_panic_callback(struct notifier_block *nb, |
| unsigned long reason, void *arg) |
| { |
| gsmi_shutdown_reason(GSMI_SHUTDOWN_PANIC); |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block gsmi_panic_notifier = { |
| .notifier_call = gsmi_panic_callback, |
| }; |
| |
| /* |
| * This hash function was blatantly copied from include/linux/hash.h. |
| * It is used by this driver to obfuscate a board name that requires a |
| * quirk within this driver. |
| * |
| * Please do not remove this copy of the function as any changes to the |
| * global utility hash_64() function would break this driver's ability |
| * to identify a board and provide the appropriate quirk -- mikew@google.com |
| */ |
| static u64 __init local_hash_64(u64 val, unsigned bits) |
| { |
| u64 hash = val; |
| |
| /* Sigh, gcc can't optimise this alone like it does for 32 bits. */ |
| u64 n = hash; |
| n <<= 18; |
| hash -= n; |
| n <<= 33; |
| hash -= n; |
| n <<= 3; |
| hash += n; |
| n <<= 3; |
| hash -= n; |
| n <<= 4; |
| hash += n; |
| n <<= 2; |
| hash += n; |
| |
| /* High bits are more random, so use them. */ |
| return hash >> (64 - bits); |
| } |
| |
| static u32 __init hash_oem_table_id(char s[8]) |
| { |
| u64 input; |
| memcpy(&input, s, 8); |
| return local_hash_64(input, 32); |
| } |
| |
| static struct dmi_system_id gsmi_dmi_table[] __initdata = { |
| { |
| .ident = "Google Board", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."), |
| }, |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(dmi, gsmi_dmi_table); |
| |
| static __init int gsmi_system_valid(void) |
| { |
| u32 hash; |
| |
| if (!dmi_check_system(gsmi_dmi_table)) |
| return -ENODEV; |
| |
| /* |
| * Only newer firmware supports the gsmi interface. All older |
| * firmware that didn't support this interface used to plug the |
| * table name in the first four bytes of the oem_table_id field. |
| * Newer firmware doesn't do that though, so use that as the |
| * discriminant factor. We have to do this in order to |
| * whitewash our board names out of the public driver. |
| */ |
| if (!strncmp(acpi_gbl_FADT.header.oem_table_id, "FACP", 4)) { |
| printk(KERN_INFO "gsmi: Board is too old\n"); |
| return -ENODEV; |
| } |
| |
| /* Disable on board with 1.0 BIOS due to Google bug 2602657 */ |
| hash = hash_oem_table_id(acpi_gbl_FADT.header.oem_table_id); |
| if (hash == QUIRKY_BOARD_HASH) { |
| const char *bios_ver = dmi_get_system_info(DMI_BIOS_VERSION); |
| if (strncmp(bios_ver, "1.0", 3) == 0) { |
| pr_info("gsmi: disabled on this board's BIOS %s\n", |
| bios_ver); |
| return -ENODEV; |
| } |
| } |
| |
| /* check for valid SMI command port in ACPI FADT */ |
| if (acpi_gbl_FADT.smi_command == 0) { |
| pr_info("gsmi: missing smi_command\n"); |
| return -ENODEV; |
| } |
| |
| /* Found */ |
| return 0; |
| } |
| |
| static struct kobject *gsmi_kobj; |
| static struct efivars efivars; |
| |
| static const struct platform_device_info gsmi_dev_info = { |
| .name = "gsmi", |
| .id = -1, |
| /* SMI callbacks require 32bit addresses */ |
| .dma_mask = DMA_BIT_MASK(32), |
| }; |
| |
| static __init int gsmi_init(void) |
| { |
| unsigned long flags; |
| int ret; |
| |
| ret = gsmi_system_valid(); |
| if (ret) |
| return ret; |
| |
| gsmi_dev.smi_cmd = acpi_gbl_FADT.smi_command; |
| |
| /* register device */ |
| gsmi_dev.pdev = platform_device_register_full(&gsmi_dev_info); |
| if (IS_ERR(gsmi_dev.pdev)) { |
| printk(KERN_ERR "gsmi: unable to register platform device\n"); |
| return PTR_ERR(gsmi_dev.pdev); |
| } |
| |
| /* SMI access needs to be serialized */ |
| spin_lock_init(&gsmi_dev.lock); |
| |
| ret = -ENOMEM; |
| gsmi_dev.dma_pool = dma_pool_create("gsmi", &gsmi_dev.pdev->dev, |
| GSMI_BUF_SIZE, GSMI_BUF_ALIGN, 0); |
| if (!gsmi_dev.dma_pool) |
| goto out_err; |
| |
| /* |
| * pre-allocate buffers because sometimes we are called when |
| * this is not feasible: oops, panic, die, mce, etc |
| */ |
| gsmi_dev.name_buf = gsmi_buf_alloc(); |
| if (!gsmi_dev.name_buf) { |
| printk(KERN_ERR "gsmi: failed to allocate name buffer\n"); |
| goto out_err; |
| } |
| |
| gsmi_dev.data_buf = gsmi_buf_alloc(); |
| if (!gsmi_dev.data_buf) { |
| printk(KERN_ERR "gsmi: failed to allocate data buffer\n"); |
| goto out_err; |
| } |
| |
| gsmi_dev.param_buf = gsmi_buf_alloc(); |
| if (!gsmi_dev.param_buf) { |
| printk(KERN_ERR "gsmi: failed to allocate param buffer\n"); |
| goto out_err; |
| } |
| |
| /* |
| * Determine type of handshake used to serialize the SMI |
| * entry. See also gsmi_exec(). |
| * |
| * There's a "behavior" present on some chipsets where writing the |
| * SMI trigger register in the southbridge doesn't result in an |
| * immediate SMI. Rather, the processor can execute "a few" more |
| * instructions before the SMI takes effect. To ensure synchronous |
| * behavior, implement a handshake between the kernel driver and the |
| * firmware handler to spin until released. This ioctl determines |
| * the type of handshake. |
| * |
| * NONE: The firmware handler does not implement any |
| * handshake. Either it doesn't need to, or it's legacy firmware |
| * that doesn't know it needs to and never will. |
| * |
| * CF: The firmware handler will clear the CF in the saved |
| * state before returning. The driver may set the CF and test for |
| * it to clear before proceeding. |
| * |
| * SPIN: The firmware handler does not implement any handshake |
| * but the driver should spin for a hundred or so microseconds |
| * to ensure the SMI has triggered. |
| * |
| * Finally, the handler will return -ENOSYS if |
| * GSMI_CMD_HANDSHAKE_TYPE is unimplemented, which implies |
| * HANDSHAKE_NONE. |
| */ |
| spin_lock_irqsave(&gsmi_dev.lock, flags); |
| gsmi_dev.handshake_type = GSMI_HANDSHAKE_SPIN; |
| gsmi_dev.handshake_type = |
| gsmi_exec(GSMI_CALLBACK, GSMI_CMD_HANDSHAKE_TYPE); |
| if (gsmi_dev.handshake_type == -ENOSYS) |
| gsmi_dev.handshake_type = GSMI_HANDSHAKE_NONE; |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); |
| |
| /* Remove and clean up gsmi if the handshake could not complete. */ |
| if (gsmi_dev.handshake_type == -ENXIO) { |
| printk(KERN_INFO "gsmi version " DRIVER_VERSION |
| " failed to load\n"); |
| ret = -ENODEV; |
| goto out_err; |
| } |
| |
| /* Register in the firmware directory */ |
| ret = -ENOMEM; |
| gsmi_kobj = kobject_create_and_add("gsmi", firmware_kobj); |
| if (!gsmi_kobj) { |
| printk(KERN_INFO "gsmi: Failed to create firmware kobj\n"); |
| goto out_err; |
| } |
| |
| /* Setup eventlog access */ |
| ret = sysfs_create_bin_file(gsmi_kobj, &eventlog_bin_attr); |
| if (ret) { |
| printk(KERN_INFO "gsmi: Failed to setup eventlog"); |
| goto out_err; |
| } |
| |
| /* Other attributes */ |
| ret = sysfs_create_files(gsmi_kobj, gsmi_attrs); |
| if (ret) { |
| printk(KERN_INFO "gsmi: Failed to add attrs"); |
| goto out_remove_bin_file; |
| } |
| |
| ret = efivars_register(&efivars, &efivar_ops, gsmi_kobj); |
| if (ret) { |
| printk(KERN_INFO "gsmi: Failed to register efivars\n"); |
| goto out_remove_sysfs_files; |
| } |
| |
| register_reboot_notifier(&gsmi_reboot_notifier); |
| register_die_notifier(&gsmi_die_notifier); |
| atomic_notifier_chain_register(&panic_notifier_list, |
| &gsmi_panic_notifier); |
| |
| printk(KERN_INFO "gsmi version " DRIVER_VERSION " loaded\n"); |
| |
| return 0; |
| |
| out_remove_sysfs_files: |
| sysfs_remove_files(gsmi_kobj, gsmi_attrs); |
| out_remove_bin_file: |
| sysfs_remove_bin_file(gsmi_kobj, &eventlog_bin_attr); |
| out_err: |
| kobject_put(gsmi_kobj); |
| gsmi_buf_free(gsmi_dev.param_buf); |
| gsmi_buf_free(gsmi_dev.data_buf); |
| gsmi_buf_free(gsmi_dev.name_buf); |
| if (gsmi_dev.dma_pool) |
| dma_pool_destroy(gsmi_dev.dma_pool); |
| platform_device_unregister(gsmi_dev.pdev); |
| pr_info("gsmi: failed to load: %d\n", ret); |
| return ret; |
| } |
| |
| static void __exit gsmi_exit(void) |
| { |
| unregister_reboot_notifier(&gsmi_reboot_notifier); |
| unregister_die_notifier(&gsmi_die_notifier); |
| atomic_notifier_chain_unregister(&panic_notifier_list, |
| &gsmi_panic_notifier); |
| efivars_unregister(&efivars); |
| |
| sysfs_remove_files(gsmi_kobj, gsmi_attrs); |
| sysfs_remove_bin_file(gsmi_kobj, &eventlog_bin_attr); |
| kobject_put(gsmi_kobj); |
| gsmi_buf_free(gsmi_dev.param_buf); |
| gsmi_buf_free(gsmi_dev.data_buf); |
| gsmi_buf_free(gsmi_dev.name_buf); |
| dma_pool_destroy(gsmi_dev.dma_pool); |
| platform_device_unregister(gsmi_dev.pdev); |
| } |
| |
| module_init(gsmi_init); |
| module_exit(gsmi_exit); |
| |
| MODULE_AUTHOR("Google, Inc."); |
| MODULE_LICENSE("GPL"); |