| /****************************************************************************** |
| * |
| * Module Name: utids - support for device Ids - HID, UID, CID |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2013, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <acpi/acpi.h> |
| #include "accommon.h" |
| #include "acinterp.h" |
| |
| #define _COMPONENT ACPI_UTILITIES |
| ACPI_MODULE_NAME("utids") |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_execute_HID |
| * |
| * PARAMETERS: device_node - Node for the device |
| * return_id - Where the string HID is returned |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Executes the _HID control method that returns the hardware |
| * ID of the device. The HID is either an 32-bit encoded EISAID |
| * Integer or a String. A string is always returned. An EISAID |
| * is converted to a string. |
| * |
| * NOTE: Internal function, no parameter validation |
| * |
| ******************************************************************************/ |
| acpi_status |
| acpi_ut_execute_HID(struct acpi_namespace_node *device_node, |
| struct acpi_pnp_device_id **return_id) |
| { |
| union acpi_operand_object *obj_desc; |
| struct acpi_pnp_device_id *hid; |
| u32 length; |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(ut_execute_HID); |
| |
| status = acpi_ut_evaluate_object(device_node, METHOD_NAME__HID, |
| ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING, |
| &obj_desc); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Get the size of the String to be returned, includes null terminator */ |
| |
| if (obj_desc->common.type == ACPI_TYPE_INTEGER) { |
| length = ACPI_EISAID_STRING_SIZE; |
| } else { |
| length = obj_desc->string.length + 1; |
| } |
| |
| /* Allocate a buffer for the HID */ |
| |
| hid = |
| ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) + |
| (acpi_size) length); |
| if (!hid) { |
| status = AE_NO_MEMORY; |
| goto cleanup; |
| } |
| |
| /* Area for the string starts after PNP_DEVICE_ID struct */ |
| |
| hid->string = |
| ACPI_ADD_PTR(char, hid, sizeof(struct acpi_pnp_device_id)); |
| |
| /* Convert EISAID to a string or simply copy existing string */ |
| |
| if (obj_desc->common.type == ACPI_TYPE_INTEGER) { |
| acpi_ex_eisa_id_to_string(hid->string, obj_desc->integer.value); |
| } else { |
| ACPI_STRCPY(hid->string, obj_desc->string.pointer); |
| } |
| |
| hid->length = length; |
| *return_id = hid; |
| |
| cleanup: |
| |
| /* On exit, we must delete the return object */ |
| |
| acpi_ut_remove_reference(obj_desc); |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_execute_SUB |
| * |
| * PARAMETERS: device_node - Node for the device |
| * return_id - Where the _SUB is returned |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Executes the _SUB control method that returns the subsystem |
| * ID of the device. The _SUB value is always a string containing |
| * either a valid PNP or ACPI ID. |
| * |
| * NOTE: Internal function, no parameter validation |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_ut_execute_SUB(struct acpi_namespace_node *device_node, |
| struct acpi_pnp_device_id **return_id) |
| { |
| union acpi_operand_object *obj_desc; |
| struct acpi_pnp_device_id *sub; |
| u32 length; |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(ut_execute_SUB); |
| |
| status = acpi_ut_evaluate_object(device_node, METHOD_NAME__SUB, |
| ACPI_BTYPE_STRING, &obj_desc); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Get the size of the String to be returned, includes null terminator */ |
| |
| length = obj_desc->string.length + 1; |
| |
| /* Allocate a buffer for the SUB */ |
| |
| sub = |
| ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) + |
| (acpi_size) length); |
| if (!sub) { |
| status = AE_NO_MEMORY; |
| goto cleanup; |
| } |
| |
| /* Area for the string starts after PNP_DEVICE_ID struct */ |
| |
| sub->string = |
| ACPI_ADD_PTR(char, sub, sizeof(struct acpi_pnp_device_id)); |
| |
| /* Simply copy existing string */ |
| |
| ACPI_STRCPY(sub->string, obj_desc->string.pointer); |
| sub->length = length; |
| *return_id = sub; |
| |
| cleanup: |
| |
| /* On exit, we must delete the return object */ |
| |
| acpi_ut_remove_reference(obj_desc); |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_execute_UID |
| * |
| * PARAMETERS: device_node - Node for the device |
| * return_id - Where the string UID is returned |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Executes the _UID control method that returns the unique |
| * ID of the device. The UID is either a 64-bit Integer (NOT an |
| * EISAID) or a string. Always returns a string. A 64-bit integer |
| * is converted to a decimal string. |
| * |
| * NOTE: Internal function, no parameter validation |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_ut_execute_UID(struct acpi_namespace_node *device_node, |
| struct acpi_pnp_device_id **return_id) |
| { |
| union acpi_operand_object *obj_desc; |
| struct acpi_pnp_device_id *uid; |
| u32 length; |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(ut_execute_UID); |
| |
| status = acpi_ut_evaluate_object(device_node, METHOD_NAME__UID, |
| ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING, |
| &obj_desc); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Get the size of the String to be returned, includes null terminator */ |
| |
| if (obj_desc->common.type == ACPI_TYPE_INTEGER) { |
| length = ACPI_MAX64_DECIMAL_DIGITS + 1; |
| } else { |
| length = obj_desc->string.length + 1; |
| } |
| |
| /* Allocate a buffer for the UID */ |
| |
| uid = |
| ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) + |
| (acpi_size) length); |
| if (!uid) { |
| status = AE_NO_MEMORY; |
| goto cleanup; |
| } |
| |
| /* Area for the string starts after PNP_DEVICE_ID struct */ |
| |
| uid->string = |
| ACPI_ADD_PTR(char, uid, sizeof(struct acpi_pnp_device_id)); |
| |
| /* Convert an Integer to string, or just copy an existing string */ |
| |
| if (obj_desc->common.type == ACPI_TYPE_INTEGER) { |
| acpi_ex_integer_to_string(uid->string, obj_desc->integer.value); |
| } else { |
| ACPI_STRCPY(uid->string, obj_desc->string.pointer); |
| } |
| |
| uid->length = length; |
| *return_id = uid; |
| |
| cleanup: |
| |
| /* On exit, we must delete the return object */ |
| |
| acpi_ut_remove_reference(obj_desc); |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_execute_CID |
| * |
| * PARAMETERS: device_node - Node for the device |
| * return_cid_list - Where the CID list is returned |
| * |
| * RETURN: Status, list of CID strings |
| * |
| * DESCRIPTION: Executes the _CID control method that returns one or more |
| * compatible hardware IDs for the device. |
| * |
| * NOTE: Internal function, no parameter validation |
| * |
| * A _CID method can return either a single compatible ID or a package of |
| * compatible IDs. Each compatible ID can be one of the following: |
| * 1) Integer (32 bit compressed EISA ID) or |
| * 2) String (PCI ID format, e.g. "PCI\VEN_vvvv&DEV_dddd&SUBSYS_ssssssss") |
| * |
| * The Integer CIDs are converted to string format by this function. |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_ut_execute_CID(struct acpi_namespace_node *device_node, |
| struct acpi_pnp_device_id_list **return_cid_list) |
| { |
| union acpi_operand_object **cid_objects; |
| union acpi_operand_object *obj_desc; |
| struct acpi_pnp_device_id_list *cid_list; |
| char *next_id_string; |
| u32 string_area_size; |
| u32 length; |
| u32 cid_list_size; |
| acpi_status status; |
| u32 count; |
| u32 i; |
| |
| ACPI_FUNCTION_TRACE(ut_execute_CID); |
| |
| /* Evaluate the _CID method for this device */ |
| |
| status = acpi_ut_evaluate_object(device_node, METHOD_NAME__CID, |
| ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING |
| | ACPI_BTYPE_PACKAGE, &obj_desc); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* |
| * Get the count and size of the returned _CIDs. _CID can return either |
| * a Package of Integers/Strings or a single Integer or String. |
| * Note: This section also validates that all CID elements are of the |
| * correct type (Integer or String). |
| */ |
| if (obj_desc->common.type == ACPI_TYPE_PACKAGE) { |
| count = obj_desc->package.count; |
| cid_objects = obj_desc->package.elements; |
| } else { /* Single Integer or String CID */ |
| |
| count = 1; |
| cid_objects = &obj_desc; |
| } |
| |
| string_area_size = 0; |
| for (i = 0; i < count; i++) { |
| |
| /* String lengths include null terminator */ |
| |
| switch (cid_objects[i]->common.type) { |
| case ACPI_TYPE_INTEGER: |
| string_area_size += ACPI_EISAID_STRING_SIZE; |
| break; |
| |
| case ACPI_TYPE_STRING: |
| string_area_size += cid_objects[i]->string.length + 1; |
| break; |
| |
| default: |
| status = AE_TYPE; |
| goto cleanup; |
| } |
| } |
| |
| /* |
| * Now that we know the length of the CIDs, allocate return buffer: |
| * 1) Size of the base structure + |
| * 2) Size of the CID PNP_DEVICE_ID array + |
| * 3) Size of the actual CID strings |
| */ |
| cid_list_size = sizeof(struct acpi_pnp_device_id_list) + |
| ((count - 1) * sizeof(struct acpi_pnp_device_id)) + |
| string_area_size; |
| |
| cid_list = ACPI_ALLOCATE_ZEROED(cid_list_size); |
| if (!cid_list) { |
| status = AE_NO_MEMORY; |
| goto cleanup; |
| } |
| |
| /* Area for CID strings starts after the CID PNP_DEVICE_ID array */ |
| |
| next_id_string = ACPI_CAST_PTR(char, cid_list->ids) + |
| ((acpi_size) count * sizeof(struct acpi_pnp_device_id)); |
| |
| /* Copy/convert the CIDs to the return buffer */ |
| |
| for (i = 0; i < count; i++) { |
| if (cid_objects[i]->common.type == ACPI_TYPE_INTEGER) { |
| |
| /* Convert the Integer (EISAID) CID to a string */ |
| |
| acpi_ex_eisa_id_to_string(next_id_string, |
| cid_objects[i]->integer. |
| value); |
| length = ACPI_EISAID_STRING_SIZE; |
| } else { /* ACPI_TYPE_STRING */ |
| |
| /* Copy the String CID from the returned object */ |
| |
| ACPI_STRCPY(next_id_string, |
| cid_objects[i]->string.pointer); |
| length = cid_objects[i]->string.length + 1; |
| } |
| |
| cid_list->ids[i].string = next_id_string; |
| cid_list->ids[i].length = length; |
| next_id_string += length; |
| } |
| |
| /* Finish the CID list */ |
| |
| cid_list->count = count; |
| cid_list->list_size = cid_list_size; |
| *return_cid_list = cid_list; |
| |
| cleanup: |
| |
| /* On exit, we must delete the _CID return object */ |
| |
| acpi_ut_remove_reference(obj_desc); |
| return_ACPI_STATUS(status); |
| } |