drivers/pwm/pwm-bcm-kona.c - kernel/msm-4.9 - Gitiles

 /*
  * Copyright (C) 2014 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation version 2.
  *
  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
  * kind, whether express or implied; without even the implied warranty
  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/math64.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/slab.h>
 #include <linux/types.h>

 /*
  * The Kona PWM has some unusual characteristics.  Here are the main points.
  *
  * 1) There is no disable bit and the hardware docs advise programming a zero
  *    duty to achieve output equivalent to that of a normal disable operation.
  *
  * 2) Changes to prescale, duty, period, and polarity do not take effect until
  *    a subsequent rising edge of the trigger bit.
  *
  * 3) If the smooth bit and trigger bit are both low, the output is a constant
  *    high signal.  Otherwise, the earlier waveform continues to be output.
  *
  * 4) If the smooth bit is set on the rising edge of the trigger bit, output
  *    will transition to the new settings on a period boundary (which could be
  *    seconds away).  If the smooth bit is clear, new settings will be applied
  *    as soon as possible (the hardware always has a 400ns delay).
  *
  * 5) When the external clock that feeds the PWM is disabled, output is pegged
  *    high or low depending on its state at that exact instant.
  */

 #define PWM_CONTROL_OFFSET			(0x00000000)
 #define PWM_CONTROL_SMOOTH_SHIFT(chan)		(24 + (chan))
 #define PWM_CONTROL_TYPE_SHIFT(chan)		(16 + (chan))
 #define PWM_CONTROL_POLARITY_SHIFT(chan)	(8 + (chan))
 #define PWM_CONTROL_TRIGGER_SHIFT(chan)		(chan)

 #define PRESCALE_OFFSET				(0x00000004)
 #define PRESCALE_SHIFT(chan)			((chan) << 2)
 #define PRESCALE_MASK(chan)			(0x7 << PRESCALE_SHIFT(chan))
 #define PRESCALE_MIN				(0x00000000)
 #define PRESCALE_MAX				(0x00000007)

 #define PERIOD_COUNT_OFFSET(chan)		(0x00000008 + ((chan) << 3))
 #define PERIOD_COUNT_MIN			(0x00000002)
 #define PERIOD_COUNT_MAX			(0x00ffffff)

 #define DUTY_CYCLE_HIGH_OFFSET(chan)		(0x0000000c + ((chan) << 3))
 #define DUTY_CYCLE_HIGH_MIN			(0x00000000)
 #define DUTY_CYCLE_HIGH_MAX			(0x00ffffff)

 struct kona_pwmc {
 	struct pwm_chip chip;
 	void __iomem *base;
 	struct clk *clk;
 };

 static inline struct kona_pwmc *to_kona_pwmc(struct pwm_chip *_chip)
 {
 	return container_of(_chip, struct kona_pwmc, chip);
 }

 static void kona_pwmc_apply_settings(struct kona_pwmc *kp, unsigned int chan)
 {
 	unsigned int value = readl(kp->base + PWM_CONTROL_OFFSET);

 	/* Clear trigger bit but set smooth bit to maintain old output */
 	value |= 1 << PWM_CONTROL_SMOOTH_SHIFT(chan);
 	value &= ~(1 << PWM_CONTROL_TRIGGER_SHIFT(chan));
 	writel(value, kp->base + PWM_CONTROL_OFFSET);

 	/* Set trigger bit and clear smooth bit to apply new settings */
 	value &= ~(1 << PWM_CONTROL_SMOOTH_SHIFT(chan));
 	value |= 1 << PWM_CONTROL_TRIGGER_SHIFT(chan);
 	writel(value, kp->base + PWM_CONTROL_OFFSET);
 }

 static int kona_pwmc_config(struct pwm_chip *chip, struct pwm_device *pwm,
 			    int duty_ns, int period_ns)
 {
 	struct kona_pwmc *kp = to_kona_pwmc(chip);
 	u64 val, div, rate;
 	unsigned long prescale = PRESCALE_MIN, pc, dc;
 	unsigned int value, chan = pwm->hwpwm;

 	/*
 	 * Find period count, duty count and prescale to suit duty_ns and
 	 * period_ns. This is done according to formulas described below:
 	 *
 	 * period_ns = 10^9 * (PRESCALE + 1) * PC / PWM_CLK_RATE
 	 * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
 	 *
 	 * PC = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
 	 * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
 	 */

 	rate = clk_get_rate(kp->clk);

 	while (1) {
 		div = 1000000000;
 		div *= 1 + prescale;
 		val = rate * period_ns;
 		pc = div64_u64(val, div);
 		val = rate * duty_ns;
 		dc = div64_u64(val, div);

 		/* If duty_ns or period_ns are not achievable then return */
 		if (pc < PERIOD_COUNT_MIN || dc < DUTY_CYCLE_HIGH_MIN)
 			return -EINVAL;

 		/* If pc and dc are in bounds, the calculation is done */
 		if (pc <= PERIOD_COUNT_MAX && dc <= DUTY_CYCLE_HIGH_MAX)
 			break;

 		/* Otherwise, increase prescale and recalculate pc and dc */
 		if (++prescale > PRESCALE_MAX)
 			return -EINVAL;
 	}

 	/* If the PWM channel is enabled, write the settings to the HW */
 	if (test_bit(PWMF_ENABLED, &pwm->flags)) {
 		value = readl(kp->base + PRESCALE_OFFSET);
 		value &= ~PRESCALE_MASK(chan);
 		value |= prescale << PRESCALE_SHIFT(chan);
 		writel(value, kp->base + PRESCALE_OFFSET);

 		writel(pc, kp->base + PERIOD_COUNT_OFFSET(chan));

 		writel(dc, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));

 		kona_pwmc_apply_settings(kp, chan);
 	}

 	return 0;
 }

 static int kona_pwmc_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
 				  enum pwm_polarity polarity)
 {
 	struct kona_pwmc *kp = to_kona_pwmc(chip);
 	unsigned int chan = pwm->hwpwm;
 	unsigned int value;
 	int ret;

 	ret = clk_prepare_enable(kp->clk);
 	if (ret < 0) {
 		dev_err(chip->dev, "failed to enable clock: %d\n", ret);
 		return ret;
 	}

 	value = readl(kp->base + PWM_CONTROL_OFFSET);

 	if (polarity == PWM_POLARITY_NORMAL)
 		value |= 1 << PWM_CONTROL_POLARITY_SHIFT(chan);
 	else
 		value &= ~(1 << PWM_CONTROL_POLARITY_SHIFT(chan));

 	writel(value, kp->base + PWM_CONTROL_OFFSET);

 	kona_pwmc_apply_settings(kp, chan);

 	/* Wait for waveform to settle before gating off the clock */
 	ndelay(400);

 	clk_disable_unprepare(kp->clk);

 	return 0;
 }

 static int kona_pwmc_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct kona_pwmc *kp = to_kona_pwmc(chip);
 	int ret;

 	ret = clk_prepare_enable(kp->clk);
 	if (ret < 0) {
 		dev_err(chip->dev, "failed to enable clock: %d\n", ret);
 		return ret;
 	}

 	ret = kona_pwmc_config(chip, pwm, pwm->duty_cycle, pwm->period);
 	if (ret < 0) {
 		clk_disable_unprepare(kp->clk);
 		return ret;
 	}

 	return 0;
 }

 static void kona_pwmc_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct kona_pwmc *kp = to_kona_pwmc(chip);
 	unsigned int chan = pwm->hwpwm;

 	/* Simulate a disable by configuring for zero duty */
 	writel(0, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));
 	kona_pwmc_apply_settings(kp, chan);

 	/* Wait for waveform to settle before gating off the clock */
 	ndelay(400);

 	clk_disable_unprepare(kp->clk);
 }

 static const struct pwm_ops kona_pwm_ops = {
 	.config = kona_pwmc_config,
 	.set_polarity = kona_pwmc_set_polarity,
 	.enable = kona_pwmc_enable,
 	.disable = kona_pwmc_disable,
 	.owner = THIS_MODULE,
 };

 static int kona_pwmc_probe(struct platform_device *pdev)
 {
 	struct kona_pwmc *kp;
 	struct resource *res;
 	unsigned int chan;
 	unsigned int value = 0;
 	int ret = 0;

 	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
 	if (kp == NULL)
 		return -ENOMEM;

 	platform_set_drvdata(pdev, kp);

 	kp->chip.dev = &pdev->dev;
 	kp->chip.ops = &kona_pwm_ops;
 	kp->chip.base = -1;
 	kp->chip.npwm = 6;
 	kp->chip.of_xlate = of_pwm_xlate_with_flags;
 	kp->chip.of_pwm_n_cells = 3;
 	kp->chip.can_sleep = true;

 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	kp->base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(kp->base))
 		return PTR_ERR(kp->base);

 	kp->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(kp->clk)) {
 		dev_err(&pdev->dev, "failed to get clock: %ld\n",
 			PTR_ERR(kp->clk));
 		return PTR_ERR(kp->clk);
 	}

 	ret = clk_prepare_enable(kp->clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to enable clock: %d\n", ret);
 		return ret;
 	}

 	/* Set smooth mode, push/pull, and normal polarity for all channels */
 	for (chan = 0; chan < kp->chip.npwm; chan++) {
 		value |= (1 << PWM_CONTROL_SMOOTH_SHIFT(chan));
 		value |= (1 << PWM_CONTROL_TYPE_SHIFT(chan));
 		value |= (1 << PWM_CONTROL_POLARITY_SHIFT(chan));
 	}

 	writel(value, kp->base + PWM_CONTROL_OFFSET);

 	clk_disable_unprepare(kp->clk);

 	ret = pwmchip_add(&kp->chip);
 	if (ret < 0)
 		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);

 	return ret;
 }

 static int kona_pwmc_remove(struct platform_device *pdev)
 {
 	struct kona_pwmc *kp = platform_get_drvdata(pdev);
 	unsigned int chan;

 	for (chan = 0; chan < kp->chip.npwm; chan++)
 		if (test_bit(PWMF_ENABLED, &kp->chip.pwms[chan].flags))
 			clk_disable_unprepare(kp->clk);

 	return pwmchip_remove(&kp->chip);
 }

 static const struct of_device_id bcm_kona_pwmc_dt[] = {
 	{ .compatible = "brcm,kona-pwm" },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, bcm_kona_pwmc_dt);

 static struct platform_driver kona_pwmc_driver = {
 	.driver = {
 		.name = "bcm-kona-pwm",
 		.of_match_table = bcm_kona_pwmc_dt,
 	},
 	.probe = kona_pwmc_probe,
 	.remove = kona_pwmc_remove,
 };
 module_platform_driver(kona_pwmc_driver);

 MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>");
 MODULE_AUTHOR("Tim Kryger <tkryger@broadcom.com>");
 MODULE_DESCRIPTION("Broadcom Kona PWM driver");
 MODULE_LICENSE("GPL v2");
	/*
	* Copyright (C) 2014 Broadcom Corporation
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation version 2.
	*
	* This program is distributed "as is" WITHOUT ANY WARRANTY of any
	* kind, whether express or implied; without even the implied warranty
	* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/clk.h>
	#include <linux/delay.h>
	#include <linux/err.h>
	#include <linux/io.h>
	#include <linux/ioport.h>
	#include <linux/math64.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/platform_device.h>
	#include <linux/pwm.h>
	#include <linux/slab.h>
	#include <linux/types.h>

	/*
	* The Kona PWM has some unusual characteristics. Here are the main points.
	*
	* 1) There is no disable bit and the hardware docs advise programming a zero
	* duty to achieve output equivalent to that of a normal disable operation.
	*
	* 2) Changes to prescale, duty, period, and polarity do not take effect until
	* a subsequent rising edge of the trigger bit.
	*
	* 3) If the smooth bit and trigger bit are both low, the output is a constant
	* high signal. Otherwise, the earlier waveform continues to be output.
	*
	* 4) If the smooth bit is set on the rising edge of the trigger bit, output
	* will transition to the new settings on a period boundary (which could be
	* seconds away). If the smooth bit is clear, new settings will be applied
	* as soon as possible (the hardware always has a 400ns delay).
	*
	* 5) When the external clock that feeds the PWM is disabled, output is pegged
	* high or low depending on its state at that exact instant.
	*/

	#define PWM_CONTROL_OFFSET (0x00000000)
	#define PWM_CONTROL_SMOOTH_SHIFT(chan) (24 + (chan))
	#define PWM_CONTROL_TYPE_SHIFT(chan) (16 + (chan))
	#define PWM_CONTROL_POLARITY_SHIFT(chan) (8 + (chan))
	#define PWM_CONTROL_TRIGGER_SHIFT(chan) (chan)

	#define PRESCALE_OFFSET (0x00000004)
	#define PRESCALE_SHIFT(chan) ((chan) << 2)
	#define PRESCALE_MASK(chan) (0x7 << PRESCALE_SHIFT(chan))
	#define PRESCALE_MIN (0x00000000)
	#define PRESCALE_MAX (0x00000007)

	#define PERIOD_COUNT_OFFSET(chan) (0x00000008 + ((chan) << 3))
	#define PERIOD_COUNT_MIN (0x00000002)
	#define PERIOD_COUNT_MAX (0x00ffffff)

	#define DUTY_CYCLE_HIGH_OFFSET(chan) (0x0000000c + ((chan) << 3))
	#define DUTY_CYCLE_HIGH_MIN (0x00000000)
	#define DUTY_CYCLE_HIGH_MAX (0x00ffffff)

	struct kona_pwmc {
	struct pwm_chip chip;
	void __iomem *base;
	struct clk *clk;
	};

	static inline struct kona_pwmc to_kona_pwmc(struct pwm_chip _chip)
	{
	return container_of(_chip, struct kona_pwmc, chip);
	}

	static void kona_pwmc_apply_settings(struct kona_pwmc *kp, unsigned int chan)
	{
	unsigned int value = readl(kp->base + PWM_CONTROL_OFFSET);

	/* Clear trigger bit but set smooth bit to maintain old output */
	value \|= 1 << PWM_CONTROL_SMOOTH_SHIFT(chan);
	value &= ~(1 << PWM_CONTROL_TRIGGER_SHIFT(chan));
	writel(value, kp->base + PWM_CONTROL_OFFSET);

	/* Set trigger bit and clear smooth bit to apply new settings */
	value &= ~(1 << PWM_CONTROL_SMOOTH_SHIFT(chan));
	value \|= 1 << PWM_CONTROL_TRIGGER_SHIFT(chan);
	writel(value, kp->base + PWM_CONTROL_OFFSET);
	}

	static int kona_pwmc_config(struct pwm_chip chip, struct pwm_device pwm,
	int duty_ns, int period_ns)
	{
	struct kona_pwmc *kp = to_kona_pwmc(chip);
	u64 val, div, rate;
	unsigned long prescale = PRESCALE_MIN, pc, dc;
	unsigned int value, chan = pwm->hwpwm;

	/*
	* Find period count, duty count and prescale to suit duty_ns and
	* period_ns. This is done according to formulas described below:
	*
	* period_ns = 10^9 * (PRESCALE + 1) * PC / PWM_CLK_RATE
	* duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
	*
	* PC = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
	* DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
	*/

	rate = clk_get_rate(kp->clk);

	while (1) {
	div = 1000000000;
	div *= 1 + prescale;
	val = rate * period_ns;
	pc = div64_u64(val, div);
	val = rate * duty_ns;
	dc = div64_u64(val, div);

	/* If duty_ns or period_ns are not achievable then return */
	if (pc < PERIOD_COUNT_MIN \|\| dc < DUTY_CYCLE_HIGH_MIN)
	return -EINVAL;

	/* If pc and dc are in bounds, the calculation is done */
	if (pc <= PERIOD_COUNT_MAX && dc <= DUTY_CYCLE_HIGH_MAX)
	break;

	/* Otherwise, increase prescale and recalculate pc and dc */
	if (++prescale > PRESCALE_MAX)
	return -EINVAL;
	}

	/* If the PWM channel is enabled, write the settings to the HW */
	if (test_bit(PWMF_ENABLED, &pwm->flags)) {
	value = readl(kp->base + PRESCALE_OFFSET);
	value &= ~PRESCALE_MASK(chan);
	value \|= prescale << PRESCALE_SHIFT(chan);
	writel(value, kp->base + PRESCALE_OFFSET);

	writel(pc, kp->base + PERIOD_COUNT_OFFSET(chan));

	writel(dc, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));

	kona_pwmc_apply_settings(kp, chan);
	}

	return 0;
	}

	static int kona_pwmc_set_polarity(struct pwm_chip chip, struct pwm_device pwm,
	enum pwm_polarity polarity)
	{
	struct kona_pwmc *kp = to_kona_pwmc(chip);
	unsigned int chan = pwm->hwpwm;
	unsigned int value;
	int ret;

	ret = clk_prepare_enable(kp->clk);
	if (ret < 0) {
	dev_err(chip->dev, "failed to enable clock: %d\n", ret);
	return ret;
	}

	value = readl(kp->base + PWM_CONTROL_OFFSET);

	if (polarity == PWM_POLARITY_NORMAL)
	value \|= 1 << PWM_CONTROL_POLARITY_SHIFT(chan);
	else
	value &= ~(1 << PWM_CONTROL_POLARITY_SHIFT(chan));

	writel(value, kp->base + PWM_CONTROL_OFFSET);

	kona_pwmc_apply_settings(kp, chan);

	/* Wait for waveform to settle before gating off the clock */
	ndelay(400);

	clk_disable_unprepare(kp->clk);

	return 0;
	}

	static int kona_pwmc_enable(struct pwm_chip chip, struct pwm_device pwm)
	{
	struct kona_pwmc *kp = to_kona_pwmc(chip);
	int ret;

	ret = clk_prepare_enable(kp->clk);
	if (ret < 0) {
	dev_err(chip->dev, "failed to enable clock: %d\n", ret);
	return ret;
	}

	ret = kona_pwmc_config(chip, pwm, pwm->duty_cycle, pwm->period);
	if (ret < 0) {
	clk_disable_unprepare(kp->clk);
	return ret;
	}

	return 0;
	}

	static void kona_pwmc_disable(struct pwm_chip chip, struct pwm_device pwm)
	{
	struct kona_pwmc *kp = to_kona_pwmc(chip);
	unsigned int chan = pwm->hwpwm;

	/* Simulate a disable by configuring for zero duty */
	writel(0, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));
	kona_pwmc_apply_settings(kp, chan);

	/* Wait for waveform to settle before gating off the clock */
	ndelay(400);

	clk_disable_unprepare(kp->clk);
	}

	static const struct pwm_ops kona_pwm_ops = {
	.config = kona_pwmc_config,
	.set_polarity = kona_pwmc_set_polarity,
	.enable = kona_pwmc_enable,
	.disable = kona_pwmc_disable,
	.owner = THIS_MODULE,
	};

	static int kona_pwmc_probe(struct platform_device *pdev)
	{
	struct kona_pwmc *kp;
	struct resource *res;
	unsigned int chan;
	unsigned int value = 0;
	int ret = 0;

	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
	if (kp == NULL)
	return -ENOMEM;

	platform_set_drvdata(pdev, kp);

	kp->chip.dev = &pdev->dev;
	kp->chip.ops = &kona_pwm_ops;
	kp->chip.base = -1;
	kp->chip.npwm = 6;
	kp->chip.of_xlate = of_pwm_xlate_with_flags;
	kp->chip.of_pwm_n_cells = 3;
	kp->chip.can_sleep = true;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	kp->base = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(kp->base))
	return PTR_ERR(kp->base);

	kp->clk = devm_clk_get(&pdev->dev, NULL);
	if (IS_ERR(kp->clk)) {
	dev_err(&pdev->dev, "failed to get clock: %ld\n",
	PTR_ERR(kp->clk));
	return PTR_ERR(kp->clk);
	}

	ret = clk_prepare_enable(kp->clk);
	if (ret < 0) {
	dev_err(&pdev->dev, "failed to enable clock: %d\n", ret);
	return ret;
	}

	/* Set smooth mode, push/pull, and normal polarity for all channels */
	for (chan = 0; chan < kp->chip.npwm; chan++) {
	value \|= (1 << PWM_CONTROL_SMOOTH_SHIFT(chan));
	value \|= (1 << PWM_CONTROL_TYPE_SHIFT(chan));
	value \|= (1 << PWM_CONTROL_POLARITY_SHIFT(chan));
	}

	writel(value, kp->base + PWM_CONTROL_OFFSET);

	clk_disable_unprepare(kp->clk);

	ret = pwmchip_add(&kp->chip);
	if (ret < 0)
	dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);

	return ret;
	}

	static int kona_pwmc_remove(struct platform_device *pdev)
	{
	struct kona_pwmc *kp = platform_get_drvdata(pdev);
	unsigned int chan;

	for (chan = 0; chan < kp->chip.npwm; chan++)
	if (test_bit(PWMF_ENABLED, &kp->chip.pwms[chan].flags))
	clk_disable_unprepare(kp->clk);

	return pwmchip_remove(&kp->chip);
	}

	static const struct of_device_id bcm_kona_pwmc_dt[] = {
	{ .compatible = "brcm,kona-pwm" },
	{ },
	};
	MODULE_DEVICE_TABLE(of, bcm_kona_pwmc_dt);

	static struct platform_driver kona_pwmc_driver = {
	.driver = {
	.name = "bcm-kona-pwm",
	.of_match_table = bcm_kona_pwmc_dt,
	},
	.probe = kona_pwmc_probe,
	.remove = kona_pwmc_remove,
	};
	module_platform_driver(kona_pwmc_driver);

	MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>");
	MODULE_AUTHOR("Tim Kryger <tkryger@broadcom.com>");
	MODULE_DESCRIPTION("Broadcom Kona PWM driver");
	MODULE_LICENSE("GPL v2");