| /* |
| * Blackfin Pulse Width Modulation (PWM) core |
| * |
| * Copyright (c) 2011 Analog Devices Inc. |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| #include <linux/slab.h> |
| |
| #include <asm/gptimers.h> |
| #include <asm/portmux.h> |
| |
| struct bfin_pwm_chip { |
| struct pwm_chip chip; |
| }; |
| |
| struct bfin_pwm { |
| unsigned short pin; |
| }; |
| |
| static const unsigned short pwm_to_gptimer_per[] = { |
| P_TMR0, P_TMR1, P_TMR2, P_TMR3, P_TMR4, P_TMR5, |
| P_TMR6, P_TMR7, P_TMR8, P_TMR9, P_TMR10, P_TMR11, |
| }; |
| |
| static int bfin_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct bfin_pwm *priv; |
| int ret; |
| |
| if (pwm->hwpwm >= ARRAY_SIZE(pwm_to_gptimer_per)) |
| return -EINVAL; |
| |
| priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->pin = pwm_to_gptimer_per[pwm->hwpwm]; |
| |
| ret = peripheral_request(priv->pin, NULL); |
| if (ret) { |
| kfree(priv); |
| return ret; |
| } |
| |
| pwm_set_chip_data(pwm, priv); |
| |
| return 0; |
| } |
| |
| static void bfin_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct bfin_pwm *priv = pwm_get_chip_data(pwm); |
| |
| if (priv) { |
| peripheral_free(priv->pin); |
| kfree(priv); |
| } |
| } |
| |
| static int bfin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| int duty_ns, int period_ns) |
| { |
| struct bfin_pwm *priv = pwm_get_chip_data(pwm); |
| unsigned long period, duty; |
| unsigned long long val; |
| |
| val = (unsigned long long)get_sclk() * period_ns; |
| do_div(val, NSEC_PER_SEC); |
| period = val; |
| |
| val = (unsigned long long)period * duty_ns; |
| do_div(val, period_ns); |
| duty = period - val; |
| |
| if (duty >= period) |
| duty = period - 1; |
| |
| set_gptimer_config(priv->pin, TIMER_MODE_PWM | TIMER_PERIOD_CNT); |
| set_gptimer_pwidth(priv->pin, duty); |
| set_gptimer_period(priv->pin, period); |
| |
| return 0; |
| } |
| |
| static int bfin_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct bfin_pwm *priv = pwm_get_chip_data(pwm); |
| |
| enable_gptimer(priv->pin); |
| |
| return 0; |
| } |
| |
| static void bfin_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct bfin_pwm *priv = pwm_get_chip_data(pwm); |
| |
| disable_gptimer(priv->pin); |
| } |
| |
| static struct pwm_ops bfin_pwm_ops = { |
| .request = bfin_pwm_request, |
| .free = bfin_pwm_free, |
| .config = bfin_pwm_config, |
| .enable = bfin_pwm_enable, |
| .disable = bfin_pwm_disable, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int bfin_pwm_probe(struct platform_device *pdev) |
| { |
| struct bfin_pwm_chip *pwm; |
| int ret; |
| |
| pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); |
| if (!pwm) { |
| dev_err(&pdev->dev, "failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| platform_set_drvdata(pdev, pwm); |
| |
| pwm->chip.dev = &pdev->dev; |
| pwm->chip.ops = &bfin_pwm_ops; |
| pwm->chip.base = -1; |
| pwm->chip.npwm = 12; |
| |
| ret = pwmchip_add(&pwm->chip); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int bfin_pwm_remove(struct platform_device *pdev) |
| { |
| struct bfin_pwm_chip *pwm = platform_get_drvdata(pdev); |
| |
| return pwmchip_remove(&pwm->chip); |
| } |
| |
| static struct platform_driver bfin_pwm_driver = { |
| .driver = { |
| .name = "bfin-pwm", |
| .owner = THIS_MODULE, |
| }, |
| .probe = bfin_pwm_probe, |
| .remove = bfin_pwm_remove, |
| }; |
| |
| module_platform_driver(bfin_pwm_driver); |
| |
| MODULE_LICENSE("GPL"); |