| /* |
| * Freescale MPC85xx Memory Controller kenel module |
| * |
| * Parts Copyrighted (c) 2013 by Freescale Semiconductor, Inc. |
| * |
| * Author: Dave Jiang <djiang@mvista.com> |
| * |
| * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/ctype.h> |
| #include <linux/io.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/edac.h> |
| #include <linux/smp.h> |
| #include <linux/gfp.h> |
| |
| #include <linux/of_platform.h> |
| #include <linux/of_device.h> |
| #include "edac_module.h" |
| #include "edac_core.h" |
| #include "mpc85xx_edac.h" |
| |
| static int edac_dev_idx; |
| #ifdef CONFIG_PCI |
| static int edac_pci_idx; |
| #endif |
| static int edac_mc_idx; |
| |
| static u32 orig_ddr_err_disable; |
| static u32 orig_ddr_err_sbe; |
| |
| /* |
| * PCI Err defines |
| */ |
| #ifdef CONFIG_PCI |
| static u32 orig_pci_err_cap_dr; |
| static u32 orig_pci_err_en; |
| #endif |
| |
| static u32 orig_l2_err_disable; |
| #ifdef CONFIG_FSL_SOC_BOOKE |
| static u32 orig_hid1[2]; |
| #endif |
| |
| /************************ MC SYSFS parts ***********************************/ |
| |
| #define to_mci(k) container_of(k, struct mem_ctl_info, dev) |
| |
| static ssize_t mpc85xx_mc_inject_data_hi_show(struct device *dev, |
| struct device_attribute *mattr, |
| char *data) |
| { |
| struct mem_ctl_info *mci = to_mci(dev); |
| struct mpc85xx_mc_pdata *pdata = mci->pvt_info; |
| return sprintf(data, "0x%08x", |
| in_be32(pdata->mc_vbase + |
| MPC85XX_MC_DATA_ERR_INJECT_HI)); |
| } |
| |
| static ssize_t mpc85xx_mc_inject_data_lo_show(struct device *dev, |
| struct device_attribute *mattr, |
| char *data) |
| { |
| struct mem_ctl_info *mci = to_mci(dev); |
| struct mpc85xx_mc_pdata *pdata = mci->pvt_info; |
| return sprintf(data, "0x%08x", |
| in_be32(pdata->mc_vbase + |
| MPC85XX_MC_DATA_ERR_INJECT_LO)); |
| } |
| |
| static ssize_t mpc85xx_mc_inject_ctrl_show(struct device *dev, |
| struct device_attribute *mattr, |
| char *data) |
| { |
| struct mem_ctl_info *mci = to_mci(dev); |
| struct mpc85xx_mc_pdata *pdata = mci->pvt_info; |
| return sprintf(data, "0x%08x", |
| in_be32(pdata->mc_vbase + MPC85XX_MC_ECC_ERR_INJECT)); |
| } |
| |
| static ssize_t mpc85xx_mc_inject_data_hi_store(struct device *dev, |
| struct device_attribute *mattr, |
| const char *data, size_t count) |
| { |
| struct mem_ctl_info *mci = to_mci(dev); |
| struct mpc85xx_mc_pdata *pdata = mci->pvt_info; |
| if (isdigit(*data)) { |
| out_be32(pdata->mc_vbase + MPC85XX_MC_DATA_ERR_INJECT_HI, |
| simple_strtoul(data, NULL, 0)); |
| return count; |
| } |
| return 0; |
| } |
| |
| static ssize_t mpc85xx_mc_inject_data_lo_store(struct device *dev, |
| struct device_attribute *mattr, |
| const char *data, size_t count) |
| { |
| struct mem_ctl_info *mci = to_mci(dev); |
| struct mpc85xx_mc_pdata *pdata = mci->pvt_info; |
| if (isdigit(*data)) { |
| out_be32(pdata->mc_vbase + MPC85XX_MC_DATA_ERR_INJECT_LO, |
| simple_strtoul(data, NULL, 0)); |
| return count; |
| } |
| return 0; |
| } |
| |
| static ssize_t mpc85xx_mc_inject_ctrl_store(struct device *dev, |
| struct device_attribute *mattr, |
| const char *data, size_t count) |
| { |
| struct mem_ctl_info *mci = to_mci(dev); |
| struct mpc85xx_mc_pdata *pdata = mci->pvt_info; |
| if (isdigit(*data)) { |
| out_be32(pdata->mc_vbase + MPC85XX_MC_ECC_ERR_INJECT, |
| simple_strtoul(data, NULL, 0)); |
| return count; |
| } |
| return 0; |
| } |
| |
| DEVICE_ATTR(inject_data_hi, S_IRUGO | S_IWUSR, |
| mpc85xx_mc_inject_data_hi_show, mpc85xx_mc_inject_data_hi_store); |
| DEVICE_ATTR(inject_data_lo, S_IRUGO | S_IWUSR, |
| mpc85xx_mc_inject_data_lo_show, mpc85xx_mc_inject_data_lo_store); |
| DEVICE_ATTR(inject_ctrl, S_IRUGO | S_IWUSR, |
| mpc85xx_mc_inject_ctrl_show, mpc85xx_mc_inject_ctrl_store); |
| |
| static int mpc85xx_create_sysfs_attributes(struct mem_ctl_info *mci) |
| { |
| int rc; |
| |
| rc = device_create_file(&mci->dev, &dev_attr_inject_data_hi); |
| if (rc < 0) |
| return rc; |
| rc = device_create_file(&mci->dev, &dev_attr_inject_data_lo); |
| if (rc < 0) |
| return rc; |
| rc = device_create_file(&mci->dev, &dev_attr_inject_ctrl); |
| if (rc < 0) |
| return rc; |
| |
| return 0; |
| } |
| |
| static void mpc85xx_remove_sysfs_attributes(struct mem_ctl_info *mci) |
| { |
| device_remove_file(&mci->dev, &dev_attr_inject_data_hi); |
| device_remove_file(&mci->dev, &dev_attr_inject_data_lo); |
| device_remove_file(&mci->dev, &dev_attr_inject_ctrl); |
| } |
| |
| /**************************** PCI Err device ***************************/ |
| #ifdef CONFIG_PCI |
| |
| static void mpc85xx_pci_check(struct edac_pci_ctl_info *pci) |
| { |
| struct mpc85xx_pci_pdata *pdata = pci->pvt_info; |
| u32 err_detect; |
| |
| err_detect = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR); |
| |
| /* master aborts can happen during PCI config cycles */ |
| if (!(err_detect & ~(PCI_EDE_MULTI_ERR | PCI_EDE_MST_ABRT))) { |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, err_detect); |
| return; |
| } |
| |
| printk(KERN_ERR "PCI error(s) detected\n"); |
| printk(KERN_ERR "PCI/X ERR_DR register: %#08x\n", err_detect); |
| |
| printk(KERN_ERR "PCI/X ERR_ATTRIB register: %#08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ATTRIB)); |
| printk(KERN_ERR "PCI/X ERR_ADDR register: %#08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR)); |
| printk(KERN_ERR "PCI/X ERR_EXT_ADDR register: %#08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EXT_ADDR)); |
| printk(KERN_ERR "PCI/X ERR_DL register: %#08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DL)); |
| printk(KERN_ERR "PCI/X ERR_DH register: %#08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DH)); |
| |
| /* clear error bits */ |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, err_detect); |
| |
| if (err_detect & PCI_EDE_PERR_MASK) |
| edac_pci_handle_pe(pci, pci->ctl_name); |
| |
| if ((err_detect & ~PCI_EDE_MULTI_ERR) & ~PCI_EDE_PERR_MASK) |
| edac_pci_handle_npe(pci, pci->ctl_name); |
| } |
| |
| static void mpc85xx_pcie_check(struct edac_pci_ctl_info *pci) |
| { |
| struct mpc85xx_pci_pdata *pdata = pci->pvt_info; |
| u32 err_detect; |
| |
| err_detect = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR); |
| |
| pr_err("PCIe error(s) detected\n"); |
| pr_err("PCIe ERR_DR register: 0x%08x\n", err_detect); |
| pr_err("PCIe ERR_CAP_STAT register: 0x%08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_GAS_TIMR)); |
| pr_err("PCIe ERR_CAP_R0 register: 0x%08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R0)); |
| pr_err("PCIe ERR_CAP_R1 register: 0x%08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R1)); |
| pr_err("PCIe ERR_CAP_R2 register: 0x%08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R2)); |
| pr_err("PCIe ERR_CAP_R3 register: 0x%08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R3)); |
| |
| /* clear error bits */ |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, err_detect); |
| } |
| |
| static int mpc85xx_pcie_find_capability(struct device_node *np) |
| { |
| struct pci_controller *hose; |
| |
| if (!np) |
| return -EINVAL; |
| |
| hose = pci_find_hose_for_OF_device(np); |
| |
| return early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP); |
| } |
| |
| static irqreturn_t mpc85xx_pci_isr(int irq, void *dev_id) |
| { |
| struct edac_pci_ctl_info *pci = dev_id; |
| struct mpc85xx_pci_pdata *pdata = pci->pvt_info; |
| u32 err_detect; |
| |
| err_detect = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR); |
| |
| if (!err_detect) |
| return IRQ_NONE; |
| |
| if (pdata->is_pcie) |
| mpc85xx_pcie_check(pci); |
| else |
| mpc85xx_pci_check(pci); |
| |
| return IRQ_HANDLED; |
| } |
| |
| int mpc85xx_pci_err_probe(struct platform_device *op) |
| { |
| struct edac_pci_ctl_info *pci; |
| struct mpc85xx_pci_pdata *pdata; |
| struct resource r; |
| int res = 0; |
| |
| if (!devres_open_group(&op->dev, mpc85xx_pci_err_probe, GFP_KERNEL)) |
| return -ENOMEM; |
| |
| pci = edac_pci_alloc_ctl_info(sizeof(*pdata), "mpc85xx_pci_err"); |
| if (!pci) |
| return -ENOMEM; |
| |
| /* make sure error reporting method is sane */ |
| switch (edac_op_state) { |
| case EDAC_OPSTATE_POLL: |
| case EDAC_OPSTATE_INT: |
| break; |
| default: |
| edac_op_state = EDAC_OPSTATE_INT; |
| break; |
| } |
| |
| pdata = pci->pvt_info; |
| pdata->name = "mpc85xx_pci_err"; |
| pdata->irq = NO_IRQ; |
| |
| if (mpc85xx_pcie_find_capability(op->dev.of_node) > 0) |
| pdata->is_pcie = true; |
| |
| dev_set_drvdata(&op->dev, pci); |
| pci->dev = &op->dev; |
| pci->mod_name = EDAC_MOD_STR; |
| pci->ctl_name = pdata->name; |
| pci->dev_name = dev_name(&op->dev); |
| |
| if (edac_op_state == EDAC_OPSTATE_POLL) { |
| if (pdata->is_pcie) |
| pci->edac_check = mpc85xx_pcie_check; |
| else |
| pci->edac_check = mpc85xx_pci_check; |
| } |
| |
| pdata->edac_idx = edac_pci_idx++; |
| |
| res = of_address_to_resource(op->dev.of_node, 0, &r); |
| if (res) { |
| printk(KERN_ERR "%s: Unable to get resource for " |
| "PCI err regs\n", __func__); |
| goto err; |
| } |
| |
| /* we only need the error registers */ |
| r.start += 0xe00; |
| |
| if (!devm_request_mem_region(&op->dev, r.start, resource_size(&r), |
| pdata->name)) { |
| printk(KERN_ERR "%s: Error while requesting mem region\n", |
| __func__); |
| res = -EBUSY; |
| goto err; |
| } |
| |
| pdata->pci_vbase = devm_ioremap(&op->dev, r.start, resource_size(&r)); |
| if (!pdata->pci_vbase) { |
| printk(KERN_ERR "%s: Unable to setup PCI err regs\n", __func__); |
| res = -ENOMEM; |
| goto err; |
| } |
| |
| if (pdata->is_pcie) { |
| orig_pci_err_cap_dr = |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR); |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR, ~0); |
| orig_pci_err_en = |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN); |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, 0); |
| } else { |
| orig_pci_err_cap_dr = |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR); |
| |
| /* PCI master abort is expected during config cycles */ |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR, 0x40); |
| |
| orig_pci_err_en = |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN); |
| |
| /* disable master abort reporting */ |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, ~0x40); |
| } |
| |
| /* clear error bits */ |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, ~0); |
| |
| if (edac_pci_add_device(pci, pdata->edac_idx) > 0) { |
| edac_dbg(3, "failed edac_pci_add_device()\n"); |
| goto err; |
| } |
| |
| if (edac_op_state == EDAC_OPSTATE_INT) { |
| pdata->irq = irq_of_parse_and_map(op->dev.of_node, 0); |
| res = devm_request_irq(&op->dev, pdata->irq, |
| mpc85xx_pci_isr, |
| IRQF_SHARED, |
| "[EDAC] PCI err", pci); |
| if (res < 0) { |
| printk(KERN_ERR |
| "%s: Unable to request irq %d for " |
| "MPC85xx PCI err\n", __func__, pdata->irq); |
| irq_dispose_mapping(pdata->irq); |
| res = -ENODEV; |
| goto err2; |
| } |
| |
| printk(KERN_INFO EDAC_MOD_STR " acquired irq %d for PCI Err\n", |
| pdata->irq); |
| } |
| |
| if (pdata->is_pcie) { |
| /* |
| * Enable all PCIe error interrupt & error detect except invalid |
| * PEX_CONFIG_ADDR/PEX_CONFIG_DATA access interrupt generation |
| * enable bit and invalid PEX_CONFIG_ADDR/PEX_CONFIG_DATA access |
| * detection enable bit. Because PCIe bus code to initialize and |
| * configure these PCIe devices on booting will use some invalid |
| * PEX_CONFIG_ADDR/PEX_CONFIG_DATA, edac driver prints the much |
| * notice information. So disable this detect to fix ugly print. |
| */ |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, ~0 |
| & ~PEX_ERR_ICCAIE_EN_BIT); |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR, 0 |
| | PEX_ERR_ICCAD_DISR_BIT); |
| } |
| |
| devres_remove_group(&op->dev, mpc85xx_pci_err_probe); |
| edac_dbg(3, "success\n"); |
| printk(KERN_INFO EDAC_MOD_STR " PCI err registered\n"); |
| |
| return 0; |
| |
| err2: |
| edac_pci_del_device(&op->dev); |
| err: |
| edac_pci_free_ctl_info(pci); |
| devres_release_group(&op->dev, mpc85xx_pci_err_probe); |
| return res; |
| } |
| EXPORT_SYMBOL(mpc85xx_pci_err_probe); |
| |
| #endif /* CONFIG_PCI */ |
| |
| /**************************** L2 Err device ***************************/ |
| |
| /************************ L2 SYSFS parts ***********************************/ |
| |
| static ssize_t mpc85xx_l2_inject_data_hi_show(struct edac_device_ctl_info |
| *edac_dev, char *data) |
| { |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| return sprintf(data, "0x%08x", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJHI)); |
| } |
| |
| static ssize_t mpc85xx_l2_inject_data_lo_show(struct edac_device_ctl_info |
| *edac_dev, char *data) |
| { |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| return sprintf(data, "0x%08x", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJLO)); |
| } |
| |
| static ssize_t mpc85xx_l2_inject_ctrl_show(struct edac_device_ctl_info |
| *edac_dev, char *data) |
| { |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| return sprintf(data, "0x%08x", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJCTL)); |
| } |
| |
| static ssize_t mpc85xx_l2_inject_data_hi_store(struct edac_device_ctl_info |
| *edac_dev, const char *data, |
| size_t count) |
| { |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| if (isdigit(*data)) { |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJHI, |
| simple_strtoul(data, NULL, 0)); |
| return count; |
| } |
| return 0; |
| } |
| |
| static ssize_t mpc85xx_l2_inject_data_lo_store(struct edac_device_ctl_info |
| *edac_dev, const char *data, |
| size_t count) |
| { |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| if (isdigit(*data)) { |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJLO, |
| simple_strtoul(data, NULL, 0)); |
| return count; |
| } |
| return 0; |
| } |
| |
| static ssize_t mpc85xx_l2_inject_ctrl_store(struct edac_device_ctl_info |
| *edac_dev, const char *data, |
| size_t count) |
| { |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| if (isdigit(*data)) { |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJCTL, |
| simple_strtoul(data, NULL, 0)); |
| return count; |
| } |
| return 0; |
| } |
| |
| static struct edac_dev_sysfs_attribute mpc85xx_l2_sysfs_attributes[] = { |
| { |
| .attr = { |
| .name = "inject_data_hi", |
| .mode = (S_IRUGO | S_IWUSR) |
| }, |
| .show = mpc85xx_l2_inject_data_hi_show, |
| .store = mpc85xx_l2_inject_data_hi_store}, |
| { |
| .attr = { |
| .name = "inject_data_lo", |
| .mode = (S_IRUGO | S_IWUSR) |
| }, |
| .show = mpc85xx_l2_inject_data_lo_show, |
| .store = mpc85xx_l2_inject_data_lo_store}, |
| { |
| .attr = { |
| .name = "inject_ctrl", |
| .mode = (S_IRUGO | S_IWUSR) |
| }, |
| .show = mpc85xx_l2_inject_ctrl_show, |
| .store = mpc85xx_l2_inject_ctrl_store}, |
| |
| /* End of list */ |
| { |
| .attr = {.name = NULL} |
| } |
| }; |
| |
| static void mpc85xx_set_l2_sysfs_attributes(struct edac_device_ctl_info |
| *edac_dev) |
| { |
| edac_dev->sysfs_attributes = mpc85xx_l2_sysfs_attributes; |
| } |
| |
| /***************************** L2 ops ***********************************/ |
| |
| static void mpc85xx_l2_check(struct edac_device_ctl_info *edac_dev) |
| { |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| u32 err_detect; |
| |
| err_detect = in_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET); |
| |
| if (!(err_detect & L2_EDE_MASK)) |
| return; |
| |
| printk(KERN_ERR "ECC Error in CPU L2 cache\n"); |
| printk(KERN_ERR "L2 Error Detect Register: 0x%08x\n", err_detect); |
| printk(KERN_ERR "L2 Error Capture Data High Register: 0x%08x\n", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_CAPTDATAHI)); |
| printk(KERN_ERR "L2 Error Capture Data Lo Register: 0x%08x\n", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_CAPTDATALO)); |
| printk(KERN_ERR "L2 Error Syndrome Register: 0x%08x\n", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_CAPTECC)); |
| printk(KERN_ERR "L2 Error Attributes Capture Register: 0x%08x\n", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_ERRATTR)); |
| printk(KERN_ERR "L2 Error Address Capture Register: 0x%08x\n", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_ERRADDR)); |
| |
| /* clear error detect register */ |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET, err_detect); |
| |
| if (err_detect & L2_EDE_CE_MASK) |
| edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name); |
| |
| if (err_detect & L2_EDE_UE_MASK) |
| edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); |
| } |
| |
| static irqreturn_t mpc85xx_l2_isr(int irq, void *dev_id) |
| { |
| struct edac_device_ctl_info *edac_dev = dev_id; |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| u32 err_detect; |
| |
| err_detect = in_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET); |
| |
| if (!(err_detect & L2_EDE_MASK)) |
| return IRQ_NONE; |
| |
| mpc85xx_l2_check(edac_dev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int mpc85xx_l2_err_probe(struct platform_device *op) |
| { |
| struct edac_device_ctl_info *edac_dev; |
| struct mpc85xx_l2_pdata *pdata; |
| struct resource r; |
| int res; |
| |
| if (!devres_open_group(&op->dev, mpc85xx_l2_err_probe, GFP_KERNEL)) |
| return -ENOMEM; |
| |
| edac_dev = edac_device_alloc_ctl_info(sizeof(*pdata), |
| "cpu", 1, "L", 1, 2, NULL, 0, |
| edac_dev_idx); |
| if (!edac_dev) { |
| devres_release_group(&op->dev, mpc85xx_l2_err_probe); |
| return -ENOMEM; |
| } |
| |
| pdata = edac_dev->pvt_info; |
| pdata->name = "mpc85xx_l2_err"; |
| pdata->irq = NO_IRQ; |
| edac_dev->dev = &op->dev; |
| dev_set_drvdata(edac_dev->dev, edac_dev); |
| edac_dev->ctl_name = pdata->name; |
| edac_dev->dev_name = pdata->name; |
| |
| res = of_address_to_resource(op->dev.of_node, 0, &r); |
| if (res) { |
| printk(KERN_ERR "%s: Unable to get resource for " |
| "L2 err regs\n", __func__); |
| goto err; |
| } |
| |
| /* we only need the error registers */ |
| r.start += 0xe00; |
| |
| if (!devm_request_mem_region(&op->dev, r.start, resource_size(&r), |
| pdata->name)) { |
| printk(KERN_ERR "%s: Error while requesting mem region\n", |
| __func__); |
| res = -EBUSY; |
| goto err; |
| } |
| |
| pdata->l2_vbase = devm_ioremap(&op->dev, r.start, resource_size(&r)); |
| if (!pdata->l2_vbase) { |
| printk(KERN_ERR "%s: Unable to setup L2 err regs\n", __func__); |
| res = -ENOMEM; |
| goto err; |
| } |
| |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET, ~0); |
| |
| orig_l2_err_disable = in_be32(pdata->l2_vbase + MPC85XX_L2_ERRDIS); |
| |
| /* clear the err_dis */ |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDIS, 0); |
| |
| edac_dev->mod_name = EDAC_MOD_STR; |
| |
| if (edac_op_state == EDAC_OPSTATE_POLL) |
| edac_dev->edac_check = mpc85xx_l2_check; |
| |
| mpc85xx_set_l2_sysfs_attributes(edac_dev); |
| |
| pdata->edac_idx = edac_dev_idx++; |
| |
| if (edac_device_add_device(edac_dev) > 0) { |
| edac_dbg(3, "failed edac_device_add_device()\n"); |
| goto err; |
| } |
| |
| if (edac_op_state == EDAC_OPSTATE_INT) { |
| pdata->irq = irq_of_parse_and_map(op->dev.of_node, 0); |
| res = devm_request_irq(&op->dev, pdata->irq, |
| mpc85xx_l2_isr, IRQF_SHARED, |
| "[EDAC] L2 err", edac_dev); |
| if (res < 0) { |
| printk(KERN_ERR |
| "%s: Unable to request irq %d for " |
| "MPC85xx L2 err\n", __func__, pdata->irq); |
| irq_dispose_mapping(pdata->irq); |
| res = -ENODEV; |
| goto err2; |
| } |
| |
| printk(KERN_INFO EDAC_MOD_STR " acquired irq %d for L2 Err\n", |
| pdata->irq); |
| |
| edac_dev->op_state = OP_RUNNING_INTERRUPT; |
| |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINTEN, L2_EIE_MASK); |
| } |
| |
| devres_remove_group(&op->dev, mpc85xx_l2_err_probe); |
| |
| edac_dbg(3, "success\n"); |
| printk(KERN_INFO EDAC_MOD_STR " L2 err registered\n"); |
| |
| return 0; |
| |
| err2: |
| edac_device_del_device(&op->dev); |
| err: |
| devres_release_group(&op->dev, mpc85xx_l2_err_probe); |
| edac_device_free_ctl_info(edac_dev); |
| return res; |
| } |
| |
| static int mpc85xx_l2_err_remove(struct platform_device *op) |
| { |
| struct edac_device_ctl_info *edac_dev = dev_get_drvdata(&op->dev); |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| |
| edac_dbg(0, "\n"); |
| |
| if (edac_op_state == EDAC_OPSTATE_INT) { |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINTEN, 0); |
| irq_dispose_mapping(pdata->irq); |
| } |
| |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDIS, orig_l2_err_disable); |
| edac_device_del_device(&op->dev); |
| edac_device_free_ctl_info(edac_dev); |
| return 0; |
| } |
| |
| static struct of_device_id mpc85xx_l2_err_of_match[] = { |
| /* deprecate the fsl,85.. forms in the future, 2.6.30? */ |
| { .compatible = "fsl,8540-l2-cache-controller", }, |
| { .compatible = "fsl,8541-l2-cache-controller", }, |
| { .compatible = "fsl,8544-l2-cache-controller", }, |
| { .compatible = "fsl,8548-l2-cache-controller", }, |
| { .compatible = "fsl,8555-l2-cache-controller", }, |
| { .compatible = "fsl,8568-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8536-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8540-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8541-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8544-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8548-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8555-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8560-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8568-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8569-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8572-l2-cache-controller", }, |
| { .compatible = "fsl,p1020-l2-cache-controller", }, |
| { .compatible = "fsl,p1021-l2-cache-controller", }, |
| { .compatible = "fsl,p2020-l2-cache-controller", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, mpc85xx_l2_err_of_match); |
| |
| static struct platform_driver mpc85xx_l2_err_driver = { |
| .probe = mpc85xx_l2_err_probe, |
| .remove = mpc85xx_l2_err_remove, |
| .driver = { |
| .name = "mpc85xx_l2_err", |
| .of_match_table = mpc85xx_l2_err_of_match, |
| }, |
| }; |
| |
| /**************************** MC Err device ***************************/ |
| |
| /* |
| * Taken from table 8-55 in the MPC8641 User's Manual and/or 9-61 in the |
| * MPC8572 User's Manual. Each line represents a syndrome bit column as a |
| * 64-bit value, but split into an upper and lower 32-bit chunk. The labels |
| * below correspond to Freescale's manuals. |
| */ |
| static unsigned int ecc_table[16] = { |
| /* MSB LSB */ |
| /* [0:31] [32:63] */ |
| 0xf00fe11e, 0xc33c0ff7, /* Syndrome bit 7 */ |
| 0x00ff00ff, 0x00fff0ff, |
| 0x0f0f0f0f, 0x0f0fff00, |
| 0x11113333, 0x7777000f, |
| 0x22224444, 0x8888222f, |
| 0x44448888, 0xffff4441, |
| 0x8888ffff, 0x11118882, |
| 0xffff1111, 0x22221114, /* Syndrome bit 0 */ |
| }; |
| |
| /* |
| * Calculate the correct ECC value for a 64-bit value specified by high:low |
| */ |
| static u8 calculate_ecc(u32 high, u32 low) |
| { |
| u32 mask_low; |
| u32 mask_high; |
| int bit_cnt; |
| u8 ecc = 0; |
| int i; |
| int j; |
| |
| for (i = 0; i < 8; i++) { |
| mask_high = ecc_table[i * 2]; |
| mask_low = ecc_table[i * 2 + 1]; |
| bit_cnt = 0; |
| |
| for (j = 0; j < 32; j++) { |
| if ((mask_high >> j) & 1) |
| bit_cnt ^= (high >> j) & 1; |
| if ((mask_low >> j) & 1) |
| bit_cnt ^= (low >> j) & 1; |
| } |
| |
| ecc |= bit_cnt << i; |
| } |
| |
| return ecc; |
| } |
| |
| /* |
| * Create the syndrome code which is generated if the data line specified by |
| * 'bit' failed. Eg generate an 8-bit codes seen in Table 8-55 in the MPC8641 |
| * User's Manual and 9-61 in the MPC8572 User's Manual. |
| */ |
| static u8 syndrome_from_bit(unsigned int bit) { |
| int i; |
| u8 syndrome = 0; |
| |
| /* |
| * Cycle through the upper or lower 32-bit portion of each value in |
| * ecc_table depending on if 'bit' is in the upper or lower half of |
| * 64-bit data. |
| */ |
| for (i = bit < 32; i < 16; i += 2) |
| syndrome |= ((ecc_table[i] >> (bit % 32)) & 1) << (i / 2); |
| |
| return syndrome; |
| } |
| |
| /* |
| * Decode data and ecc syndrome to determine what went wrong |
| * Note: This can only decode single-bit errors |
| */ |
| static void sbe_ecc_decode(u32 cap_high, u32 cap_low, u32 cap_ecc, |
| int *bad_data_bit, int *bad_ecc_bit) |
| { |
| int i; |
| u8 syndrome; |
| |
| *bad_data_bit = -1; |
| *bad_ecc_bit = -1; |
| |
| /* |
| * Calculate the ECC of the captured data and XOR it with the captured |
| * ECC to find an ECC syndrome value we can search for |
| */ |
| syndrome = calculate_ecc(cap_high, cap_low) ^ cap_ecc; |
| |
| /* Check if a data line is stuck... */ |
| for (i = 0; i < 64; i++) { |
| if (syndrome == syndrome_from_bit(i)) { |
| *bad_data_bit = i; |
| return; |
| } |
| } |
| |
| /* If data is correct, check ECC bits for errors... */ |
| for (i = 0; i < 8; i++) { |
| if ((syndrome >> i) & 0x1) { |
| *bad_ecc_bit = i; |
| return; |
| } |
| } |
| } |
| |
| static void mpc85xx_mc_check(struct mem_ctl_info *mci) |
| { |
| struct mpc85xx_mc_pdata *pdata = mci->pvt_info; |
| struct csrow_info *csrow; |
| u32 bus_width; |
| u32 err_detect; |
| u32 syndrome; |
| u32 err_addr; |
| u32 pfn; |
| int row_index; |
| u32 cap_high; |
| u32 cap_low; |
| int bad_data_bit; |
| int bad_ecc_bit; |
| |
| err_detect = in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT); |
| if (!err_detect) |
| return; |
| |
| mpc85xx_mc_printk(mci, KERN_ERR, "Err Detect Register: %#8.8x\n", |
| err_detect); |
| |
| /* no more processing if not ECC bit errors */ |
| if (!(err_detect & (DDR_EDE_SBE | DDR_EDE_MBE))) { |
| out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT, err_detect); |
| return; |
| } |
| |
| syndrome = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_ECC); |
| |
| /* Mask off appropriate bits of syndrome based on bus width */ |
| bus_width = (in_be32(pdata->mc_vbase + MPC85XX_MC_DDR_SDRAM_CFG) & |
| DSC_DBW_MASK) ? 32 : 64; |
| if (bus_width == 64) |
| syndrome &= 0xff; |
| else |
| syndrome &= 0xffff; |
| |
| err_addr = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_ADDRESS); |
| pfn = err_addr >> PAGE_SHIFT; |
| |
| for (row_index = 0; row_index < mci->nr_csrows; row_index++) { |
| csrow = mci->csrows[row_index]; |
| if ((pfn >= csrow->first_page) && (pfn <= csrow->last_page)) |
| break; |
| } |
| |
| cap_high = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_DATA_HI); |
| cap_low = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_DATA_LO); |
| |
| /* |
| * Analyze single-bit errors on 64-bit wide buses |
| * TODO: Add support for 32-bit wide buses |
| */ |
| if ((err_detect & DDR_EDE_SBE) && (bus_width == 64)) { |
| sbe_ecc_decode(cap_high, cap_low, syndrome, |
| &bad_data_bit, &bad_ecc_bit); |
| |
| if (bad_data_bit != -1) |
| mpc85xx_mc_printk(mci, KERN_ERR, |
| "Faulty Data bit: %d\n", bad_data_bit); |
| if (bad_ecc_bit != -1) |
| mpc85xx_mc_printk(mci, KERN_ERR, |
| "Faulty ECC bit: %d\n", bad_ecc_bit); |
| |
| mpc85xx_mc_printk(mci, KERN_ERR, |
| "Expected Data / ECC:\t%#8.8x_%08x / %#2.2x\n", |
| cap_high ^ (1 << (bad_data_bit - 32)), |
| cap_low ^ (1 << bad_data_bit), |
| syndrome ^ (1 << bad_ecc_bit)); |
| } |
| |
| mpc85xx_mc_printk(mci, KERN_ERR, |
| "Captured Data / ECC:\t%#8.8x_%08x / %#2.2x\n", |
| cap_high, cap_low, syndrome); |
| mpc85xx_mc_printk(mci, KERN_ERR, "Err addr: %#8.8x\n", err_addr); |
| mpc85xx_mc_printk(mci, KERN_ERR, "PFN: %#8.8x\n", pfn); |
| |
| /* we are out of range */ |
| if (row_index == mci->nr_csrows) |
| mpc85xx_mc_printk(mci, KERN_ERR, "PFN out of range!\n"); |
| |
| if (err_detect & DDR_EDE_SBE) |
| edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, |
| pfn, err_addr & ~PAGE_MASK, syndrome, |
| row_index, 0, -1, |
| mci->ctl_name, ""); |
| |
| if (err_detect & DDR_EDE_MBE) |
| edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, |
| pfn, err_addr & ~PAGE_MASK, syndrome, |
| row_index, 0, -1, |
| mci->ctl_name, ""); |
| |
| out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT, err_detect); |
| } |
| |
| static irqreturn_t mpc85xx_mc_isr(int irq, void *dev_id) |
| { |
| struct mem_ctl_info *mci = dev_id; |
| struct mpc85xx_mc_pdata *pdata = mci->pvt_info; |
| u32 err_detect; |
| |
| err_detect = in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT); |
| if (!err_detect) |
| return IRQ_NONE; |
| |
| mpc85xx_mc_check(mci); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void mpc85xx_init_csrows(struct mem_ctl_info *mci) |
| { |
| struct mpc85xx_mc_pdata *pdata = mci->pvt_info; |
| struct csrow_info *csrow; |
| struct dimm_info *dimm; |
| u32 sdram_ctl; |
| u32 sdtype; |
| enum mem_type mtype; |
| u32 cs_bnds; |
| int index; |
| |
| sdram_ctl = in_be32(pdata->mc_vbase + MPC85XX_MC_DDR_SDRAM_CFG); |
| |
| sdtype = sdram_ctl & DSC_SDTYPE_MASK; |
| if (sdram_ctl & DSC_RD_EN) { |
| switch (sdtype) { |
| case DSC_SDTYPE_DDR: |
| mtype = MEM_RDDR; |
| break; |
| case DSC_SDTYPE_DDR2: |
| mtype = MEM_RDDR2; |
| break; |
| case DSC_SDTYPE_DDR3: |
| mtype = MEM_RDDR3; |
| break; |
| default: |
| mtype = MEM_UNKNOWN; |
| break; |
| } |
| } else { |
| switch (sdtype) { |
| case DSC_SDTYPE_DDR: |
| mtype = MEM_DDR; |
| break; |
| case DSC_SDTYPE_DDR2: |
| mtype = MEM_DDR2; |
| break; |
| case DSC_SDTYPE_DDR3: |
| mtype = MEM_DDR3; |
| break; |
| default: |
| mtype = MEM_UNKNOWN; |
| break; |
| } |
| } |
| |
| for (index = 0; index < mci->nr_csrows; index++) { |
| u32 start; |
| u32 end; |
| |
| csrow = mci->csrows[index]; |
| dimm = csrow->channels[0]->dimm; |
| |
| cs_bnds = in_be32(pdata->mc_vbase + MPC85XX_MC_CS_BNDS_0 + |
| (index * MPC85XX_MC_CS_BNDS_OFS)); |
| |
| start = (cs_bnds & 0xffff0000) >> 16; |
| end = (cs_bnds & 0x0000ffff); |
| |
| if (start == end) |
| continue; /* not populated */ |
| |
| start <<= (24 - PAGE_SHIFT); |
| end <<= (24 - PAGE_SHIFT); |
| end |= (1 << (24 - PAGE_SHIFT)) - 1; |
| |
| csrow->first_page = start; |
| csrow->last_page = end; |
| |
| dimm->nr_pages = end + 1 - start; |
| dimm->grain = 8; |
| dimm->mtype = mtype; |
| dimm->dtype = DEV_UNKNOWN; |
| if (sdram_ctl & DSC_X32_EN) |
| dimm->dtype = DEV_X32; |
| dimm->edac_mode = EDAC_SECDED; |
| } |
| } |
| |
| static int mpc85xx_mc_err_probe(struct platform_device *op) |
| { |
| struct mem_ctl_info *mci; |
| struct edac_mc_layer layers[2]; |
| struct mpc85xx_mc_pdata *pdata; |
| struct resource r; |
| u32 sdram_ctl; |
| int res; |
| |
| if (!devres_open_group(&op->dev, mpc85xx_mc_err_probe, GFP_KERNEL)) |
| return -ENOMEM; |
| |
| layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; |
| layers[0].size = 4; |
| layers[0].is_virt_csrow = true; |
| layers[1].type = EDAC_MC_LAYER_CHANNEL; |
| layers[1].size = 1; |
| layers[1].is_virt_csrow = false; |
| mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers, |
| sizeof(*pdata)); |
| if (!mci) { |
| devres_release_group(&op->dev, mpc85xx_mc_err_probe); |
| return -ENOMEM; |
| } |
| |
| pdata = mci->pvt_info; |
| pdata->name = "mpc85xx_mc_err"; |
| pdata->irq = NO_IRQ; |
| mci->pdev = &op->dev; |
| pdata->edac_idx = edac_mc_idx++; |
| dev_set_drvdata(mci->pdev, mci); |
| mci->ctl_name = pdata->name; |
| mci->dev_name = pdata->name; |
| |
| res = of_address_to_resource(op->dev.of_node, 0, &r); |
| if (res) { |
| printk(KERN_ERR "%s: Unable to get resource for MC err regs\n", |
| __func__); |
| goto err; |
| } |
| |
| if (!devm_request_mem_region(&op->dev, r.start, resource_size(&r), |
| pdata->name)) { |
| printk(KERN_ERR "%s: Error while requesting mem region\n", |
| __func__); |
| res = -EBUSY; |
| goto err; |
| } |
| |
| pdata->mc_vbase = devm_ioremap(&op->dev, r.start, resource_size(&r)); |
| if (!pdata->mc_vbase) { |
| printk(KERN_ERR "%s: Unable to setup MC err regs\n", __func__); |
| res = -ENOMEM; |
| goto err; |
| } |
| |
| sdram_ctl = in_be32(pdata->mc_vbase + MPC85XX_MC_DDR_SDRAM_CFG); |
| if (!(sdram_ctl & DSC_ECC_EN)) { |
| /* no ECC */ |
| printk(KERN_WARNING "%s: No ECC DIMMs discovered\n", __func__); |
| res = -ENODEV; |
| goto err; |
| } |
| |
| edac_dbg(3, "init mci\n"); |
| mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_RDDR2 | |
| MEM_FLAG_DDR | MEM_FLAG_DDR2; |
| mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; |
| mci->edac_cap = EDAC_FLAG_SECDED; |
| mci->mod_name = EDAC_MOD_STR; |
| mci->mod_ver = MPC85XX_REVISION; |
| |
| if (edac_op_state == EDAC_OPSTATE_POLL) |
| mci->edac_check = mpc85xx_mc_check; |
| |
| mci->ctl_page_to_phys = NULL; |
| |
| mci->scrub_mode = SCRUB_SW_SRC; |
| |
| mpc85xx_init_csrows(mci); |
| |
| /* store the original error disable bits */ |
| orig_ddr_err_disable = |
| in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DISABLE); |
| out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DISABLE, 0); |
| |
| /* clear all error bits */ |
| out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT, ~0); |
| |
| if (edac_mc_add_mc(mci)) { |
| edac_dbg(3, "failed edac_mc_add_mc()\n"); |
| goto err; |
| } |
| |
| if (mpc85xx_create_sysfs_attributes(mci)) { |
| edac_mc_del_mc(mci->pdev); |
| edac_dbg(3, "failed edac_mc_add_mc()\n"); |
| goto err; |
| } |
| |
| if (edac_op_state == EDAC_OPSTATE_INT) { |
| out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_INT_EN, |
| DDR_EIE_MBEE | DDR_EIE_SBEE); |
| |
| /* store the original error management threshold */ |
| orig_ddr_err_sbe = in_be32(pdata->mc_vbase + |
| MPC85XX_MC_ERR_SBE) & 0xff0000; |
| |
| /* set threshold to 1 error per interrupt */ |
| out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_SBE, 0x10000); |
| |
| /* register interrupts */ |
| pdata->irq = irq_of_parse_and_map(op->dev.of_node, 0); |
| res = devm_request_irq(&op->dev, pdata->irq, |
| mpc85xx_mc_isr, |
| IRQF_SHARED, |
| "[EDAC] MC err", mci); |
| if (res < 0) { |
| printk(KERN_ERR "%s: Unable to request irq %d for " |
| "MPC85xx DRAM ERR\n", __func__, pdata->irq); |
| irq_dispose_mapping(pdata->irq); |
| res = -ENODEV; |
| goto err2; |
| } |
| |
| printk(KERN_INFO EDAC_MOD_STR " acquired irq %d for MC\n", |
| pdata->irq); |
| } |
| |
| devres_remove_group(&op->dev, mpc85xx_mc_err_probe); |
| edac_dbg(3, "success\n"); |
| printk(KERN_INFO EDAC_MOD_STR " MC err registered\n"); |
| |
| return 0; |
| |
| err2: |
| edac_mc_del_mc(&op->dev); |
| err: |
| devres_release_group(&op->dev, mpc85xx_mc_err_probe); |
| edac_mc_free(mci); |
| return res; |
| } |
| |
| static int mpc85xx_mc_err_remove(struct platform_device *op) |
| { |
| struct mem_ctl_info *mci = dev_get_drvdata(&op->dev); |
| struct mpc85xx_mc_pdata *pdata = mci->pvt_info; |
| |
| edac_dbg(0, "\n"); |
| |
| if (edac_op_state == EDAC_OPSTATE_INT) { |
| out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_INT_EN, 0); |
| irq_dispose_mapping(pdata->irq); |
| } |
| |
| out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DISABLE, |
| orig_ddr_err_disable); |
| out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_SBE, orig_ddr_err_sbe); |
| |
| mpc85xx_remove_sysfs_attributes(mci); |
| edac_mc_del_mc(&op->dev); |
| edac_mc_free(mci); |
| return 0; |
| } |
| |
| static struct of_device_id mpc85xx_mc_err_of_match[] = { |
| /* deprecate the fsl,85.. forms in the future, 2.6.30? */ |
| { .compatible = "fsl,8540-memory-controller", }, |
| { .compatible = "fsl,8541-memory-controller", }, |
| { .compatible = "fsl,8544-memory-controller", }, |
| { .compatible = "fsl,8548-memory-controller", }, |
| { .compatible = "fsl,8555-memory-controller", }, |
| { .compatible = "fsl,8568-memory-controller", }, |
| { .compatible = "fsl,mpc8536-memory-controller", }, |
| { .compatible = "fsl,mpc8540-memory-controller", }, |
| { .compatible = "fsl,mpc8541-memory-controller", }, |
| { .compatible = "fsl,mpc8544-memory-controller", }, |
| { .compatible = "fsl,mpc8548-memory-controller", }, |
| { .compatible = "fsl,mpc8555-memory-controller", }, |
| { .compatible = "fsl,mpc8560-memory-controller", }, |
| { .compatible = "fsl,mpc8568-memory-controller", }, |
| { .compatible = "fsl,mpc8569-memory-controller", }, |
| { .compatible = "fsl,mpc8572-memory-controller", }, |
| { .compatible = "fsl,mpc8349-memory-controller", }, |
| { .compatible = "fsl,p1020-memory-controller", }, |
| { .compatible = "fsl,p1021-memory-controller", }, |
| { .compatible = "fsl,p2020-memory-controller", }, |
| { .compatible = "fsl,qoriq-memory-controller", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match); |
| |
| static struct platform_driver mpc85xx_mc_err_driver = { |
| .probe = mpc85xx_mc_err_probe, |
| .remove = mpc85xx_mc_err_remove, |
| .driver = { |
| .name = "mpc85xx_mc_err", |
| .of_match_table = mpc85xx_mc_err_of_match, |
| }, |
| }; |
| |
| #ifdef CONFIG_FSL_SOC_BOOKE |
| static void __init mpc85xx_mc_clear_rfxe(void *data) |
| { |
| orig_hid1[smp_processor_id()] = mfspr(SPRN_HID1); |
| mtspr(SPRN_HID1, (orig_hid1[smp_processor_id()] & ~HID1_RFXE)); |
| } |
| #endif |
| |
| static int __init mpc85xx_mc_init(void) |
| { |
| int res = 0; |
| u32 pvr = 0; |
| |
| printk(KERN_INFO "Freescale(R) MPC85xx EDAC driver, " |
| "(C) 2006 Montavista Software\n"); |
| |
| /* make sure error reporting method is sane */ |
| switch (edac_op_state) { |
| case EDAC_OPSTATE_POLL: |
| case EDAC_OPSTATE_INT: |
| break; |
| default: |
| edac_op_state = EDAC_OPSTATE_INT; |
| break; |
| } |
| |
| res = platform_driver_register(&mpc85xx_mc_err_driver); |
| if (res) |
| printk(KERN_WARNING EDAC_MOD_STR "MC fails to register\n"); |
| |
| res = platform_driver_register(&mpc85xx_l2_err_driver); |
| if (res) |
| printk(KERN_WARNING EDAC_MOD_STR "L2 fails to register\n"); |
| |
| #ifdef CONFIG_FSL_SOC_BOOKE |
| pvr = mfspr(SPRN_PVR); |
| |
| if ((PVR_VER(pvr) == PVR_VER_E500V1) || |
| (PVR_VER(pvr) == PVR_VER_E500V2)) { |
| /* |
| * need to clear HID1[RFXE] to disable machine check int |
| * so we can catch it |
| */ |
| if (edac_op_state == EDAC_OPSTATE_INT) |
| on_each_cpu(mpc85xx_mc_clear_rfxe, NULL, 0); |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| module_init(mpc85xx_mc_init); |
| |
| #ifdef CONFIG_FSL_SOC_BOOKE |
| static void __exit mpc85xx_mc_restore_hid1(void *data) |
| { |
| mtspr(SPRN_HID1, orig_hid1[smp_processor_id()]); |
| } |
| #endif |
| |
| static void __exit mpc85xx_mc_exit(void) |
| { |
| #ifdef CONFIG_FSL_SOC_BOOKE |
| u32 pvr = mfspr(SPRN_PVR); |
| |
| if ((PVR_VER(pvr) == PVR_VER_E500V1) || |
| (PVR_VER(pvr) == PVR_VER_E500V2)) { |
| on_each_cpu(mpc85xx_mc_restore_hid1, NULL, 0); |
| } |
| #endif |
| platform_driver_unregister(&mpc85xx_l2_err_driver); |
| platform_driver_unregister(&mpc85xx_mc_err_driver); |
| } |
| |
| module_exit(mpc85xx_mc_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Montavista Software, Inc."); |
| module_param(edac_op_state, int, 0444); |
| MODULE_PARM_DESC(edac_op_state, |
| "EDAC Error Reporting state: 0=Poll, 2=Interrupt"); |