drivers/ata/ahci_brcmstb.c - kernel/msm-4.9 - Gitiles

 /*
  * Broadcom SATA3 AHCI Controller Driver
  *
  * Copyright © 2009-2015 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2, or (at your option)
  * any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/ahci_platform.h>
 #include <linux/compiler.h>
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/libata.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/string.h>

 #include "ahci.h"

 #define DRV_NAME					"brcm-ahci"

 #define SATA_TOP_CTRL_VERSION				0x0
 #define SATA_TOP_CTRL_BUS_CTRL				0x4
  #define MMIO_ENDIAN_SHIFT				0 /* CPU->AHCI */
  #define DMADESC_ENDIAN_SHIFT				2 /* AHCI->DDR */
  #define DMADATA_ENDIAN_SHIFT				4 /* AHCI->DDR */
  #define PIODATA_ENDIAN_SHIFT				6
   #define ENDIAN_SWAP_NONE				0
   #define ENDIAN_SWAP_FULL				2
  #define OVERRIDE_HWINIT				BIT(16)
 #define SATA_TOP_CTRL_TP_CTRL				0x8
 #define SATA_TOP_CTRL_PHY_CTRL				0xc
  #define SATA_TOP_CTRL_PHY_CTRL_1			0x0
   #define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE	BIT(14)
  #define SATA_TOP_CTRL_PHY_CTRL_2			0x4
   #define SATA_TOP_CTRL_2_SW_RST_MDIOREG		BIT(0)
   #define SATA_TOP_CTRL_2_SW_RST_OOB			BIT(1)
   #define SATA_TOP_CTRL_2_SW_RST_RX			BIT(2)
   #define SATA_TOP_CTRL_2_SW_RST_TX			BIT(3)
   #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET		BIT(14)
  #define SATA_TOP_CTRL_PHY_OFFS				0x8
  #define SATA_TOP_MAX_PHYS				2
 #define SATA_TOP_CTRL_SATA_TP_OUT			0x1c
 #define SATA_TOP_CTRL_CLIENT_INIT_CTRL			0x20

 /* On big-endian MIPS, buses are reversed to big endian, so switch them back */
 #if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
 #define DATA_ENDIAN			 2 /* AHCI->DDR inbound accesses */
 #define MMIO_ENDIAN			 2 /* CPU->AHCI outbound accesses */
 #else
 #define DATA_ENDIAN			 0
 #define MMIO_ENDIAN			 0
 #endif

 #define BUS_CTRL_ENDIAN_CONF				\
 	((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) |	\
 	(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) |		\
 	(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))

 struct brcm_ahci_priv {
 	struct device *dev;
 	void __iomem *top_ctrl;
 	u32 port_mask;
 };

 static const struct ata_port_info ahci_brcm_port_info = {
 	.flags		= AHCI_FLAG_COMMON,
 	.pio_mask	= ATA_PIO4,
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &ahci_platform_ops,
 };

 static inline u32 brcm_sata_readreg(void __iomem *addr)
 {
 	/*
 	 * MIPS endianness is configured by boot strap, which also reverses all
 	 * bus endianness (i.e., big-endian CPU + big endian bus ==> native
 	 * endian I/O).
 	 *
 	 * Other architectures (e.g., ARM) either do not support big endian, or
 	 * else leave I/O in little endian mode.
 	 */
 	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
 		return __raw_readl(addr);
 	else
 		return readl_relaxed(addr);
 }

 static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
 {
 	/* See brcm_sata_readreg() comments */
 	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
 		__raw_writel(val, addr);
 	else
 		writel_relaxed(val, addr);
 }

 static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
 {
 	void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
 				(port * SATA_TOP_CTRL_PHY_OFFS);
 	void __iomem *p;
 	u32 reg;

 	/* clear PHY_DEFAULT_POWER_STATE */
 	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
 	reg = brcm_sata_readreg(p);
 	reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
 	brcm_sata_writereg(reg, p);

 	/* reset the PHY digital logic */
 	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
 	reg = brcm_sata_readreg(p);
 	reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
 		 SATA_TOP_CTRL_2_SW_RST_RX);
 	reg |= SATA_TOP_CTRL_2_SW_RST_TX;
 	brcm_sata_writereg(reg, p);
 	reg = brcm_sata_readreg(p);
 	reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
 	brcm_sata_writereg(reg, p);
 	reg = brcm_sata_readreg(p);
 	reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
 	brcm_sata_writereg(reg, p);
 	(void)brcm_sata_readreg(p);
 }

 static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
 {
 	void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
 				(port * SATA_TOP_CTRL_PHY_OFFS);
 	void __iomem *p;
 	u32 reg;

 	/* power-off the PHY digital logic */
 	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
 	reg = brcm_sata_readreg(p);
 	reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
 		SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX |
 		SATA_TOP_CTRL_2_PHY_GLOBAL_RESET);
 	brcm_sata_writereg(reg, p);

 	/* set PHY_DEFAULT_POWER_STATE */
 	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
 	reg = brcm_sata_readreg(p);
 	reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
 	brcm_sata_writereg(reg, p);
 }

 static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv)
 {
 	int i;

 	for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
 		if (priv->port_mask & BIT(i))
 			brcm_sata_phy_enable(priv, i);
 }

 static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
 {
 	int i;

 	for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
 		if (priv->port_mask & BIT(i))
 			brcm_sata_phy_disable(priv, i);
 }

 static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
 				  struct brcm_ahci_priv *priv)
 {
 	void __iomem *ahci;
 	struct resource *res;
 	u32 impl;

 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
 	ahci = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(ahci))
 		return 0;

 	impl = readl(ahci + HOST_PORTS_IMPL);

 	if (fls(impl) > SATA_TOP_MAX_PHYS)
 		dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
 			 impl);
 	else if (!impl)
 		dev_info(priv->dev, "no ports found\n");

 	devm_iounmap(&pdev->dev, ahci);
 	devm_release_mem_region(&pdev->dev, res->start, resource_size(res));

 	return impl;
 }

 static void brcm_sata_init(struct brcm_ahci_priv *priv)
 {
 	/* Configure endianness */
 	brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF,
 			   priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
 }

 static int brcm_ahci_suspend(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
 	int ret;

 	ret = ahci_platform_suspend(dev);
 	brcm_sata_phys_disable(priv);
 	return ret;
 }

 static int brcm_ahci_resume(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct brcm_ahci_priv *priv = hpriv->plat_data;

 	brcm_sata_init(priv);
 	brcm_sata_phys_enable(priv);
 	return ahci_platform_resume(dev);
 }

 static struct scsi_host_template ahci_platform_sht = {
 	AHCI_SHT(DRV_NAME),
 };

 static int brcm_ahci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct brcm_ahci_priv *priv;
 	struct ahci_host_priv *hpriv;
 	struct resource *res;
 	int ret;

 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 	priv->dev = dev;

 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
 	priv->top_ctrl = devm_ioremap_resource(dev, res);
 	if (IS_ERR(priv->top_ctrl))
 		return PTR_ERR(priv->top_ctrl);

 	brcm_sata_init(priv);

 	priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
 	if (!priv->port_mask)
 		return -ENODEV;

 	brcm_sata_phys_enable(priv);

 	hpriv = ahci_platform_get_resources(pdev);
 	if (IS_ERR(hpriv))
 		return PTR_ERR(hpriv);
 	hpriv->plat_data = priv;

 	ret = ahci_platform_enable_resources(hpriv);
 	if (ret)
 		return ret;

 	ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
 				      &ahci_platform_sht);
 	if (ret)
 		return ret;

 	dev_info(dev, "Broadcom AHCI SATA3 registered\n");

 	return 0;
 }

 static int brcm_ahci_remove(struct platform_device *pdev)
 {
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
 	int ret;

 	ret = ata_platform_remove_one(pdev);
 	if (ret)
 		return ret;

 	brcm_sata_phys_disable(priv);

 	return 0;
 }

 static const struct of_device_id ahci_of_match[] = {
 	{.compatible = "brcm,bcm7445-ahci"},
 	{},
 };
 MODULE_DEVICE_TABLE(of, ahci_of_match);

 static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);

 static struct platform_driver brcm_ahci_driver = {
 	.probe = brcm_ahci_probe,
 	.remove = brcm_ahci_remove,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ahci_of_match,
 		.pm = &ahci_brcm_pm_ops,
 	},
 };
 module_platform_driver(brcm_ahci_driver);

 MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
 MODULE_AUTHOR("Brian Norris");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:sata-brcmstb");
	/*
	* Broadcom SATA3 AHCI Controller Driver
	*
	* Copyright © 2009-2015 Broadcom Corporation
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2, or (at your option)
	* any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/ahci_platform.h>
	#include <linux/compiler.h>
	#include <linux/device.h>
	#include <linux/init.h>
	#include <linux/interrupt.h>
	#include <linux/io.h>
	#include <linux/kernel.h>
	#include <linux/libata.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/platform_device.h>
	#include <linux/string.h>

	#include "ahci.h"

	#define DRV_NAME "brcm-ahci"

	#define SATA_TOP_CTRL_VERSION 0x0
	#define SATA_TOP_CTRL_BUS_CTRL 0x4
	#define MMIO_ENDIAN_SHIFT 0 /* CPU->AHCI */
	#define DMADESC_ENDIAN_SHIFT 2 /* AHCI->DDR */
	#define DMADATA_ENDIAN_SHIFT 4 /* AHCI->DDR */
	#define PIODATA_ENDIAN_SHIFT 6
	#define ENDIAN_SWAP_NONE 0
	#define ENDIAN_SWAP_FULL 2
	#define OVERRIDE_HWINIT BIT(16)
	#define SATA_TOP_CTRL_TP_CTRL 0x8
	#define SATA_TOP_CTRL_PHY_CTRL 0xc
	#define SATA_TOP_CTRL_PHY_CTRL_1 0x0
	#define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE BIT(14)
	#define SATA_TOP_CTRL_PHY_CTRL_2 0x4
	#define SATA_TOP_CTRL_2_SW_RST_MDIOREG BIT(0)
	#define SATA_TOP_CTRL_2_SW_RST_OOB BIT(1)
	#define SATA_TOP_CTRL_2_SW_RST_RX BIT(2)
	#define SATA_TOP_CTRL_2_SW_RST_TX BIT(3)
	#define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14)
	#define SATA_TOP_CTRL_PHY_OFFS 0x8
	#define SATA_TOP_MAX_PHYS 2
	#define SATA_TOP_CTRL_SATA_TP_OUT 0x1c
	#define SATA_TOP_CTRL_CLIENT_INIT_CTRL 0x20

	/* On big-endian MIPS, buses are reversed to big endian, so switch them back */
	#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
	#define DATA_ENDIAN 2 /* AHCI->DDR inbound accesses */
	#define MMIO_ENDIAN 2 /* CPU->AHCI outbound accesses */
	#else
	#define DATA_ENDIAN 0
	#define MMIO_ENDIAN 0
	#endif

	#define BUS_CTRL_ENDIAN_CONF \
	((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) \| \
	(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) \| \
	(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))

	struct brcm_ahci_priv {
	struct device *dev;
	void __iomem *top_ctrl;
	u32 port_mask;
	};

	static const struct ata_port_info ahci_brcm_port_info = {
	.flags = AHCI_FLAG_COMMON,
	.pio_mask = ATA_PIO4,
	.udma_mask = ATA_UDMA6,
	.port_ops = &ahci_platform_ops,
	};

	static inline u32 brcm_sata_readreg(void __iomem *addr)
	{
	/*
	* MIPS endianness is configured by boot strap, which also reverses all
	* bus endianness (i.e., big-endian CPU + big endian bus ==> native
	* endian I/O).
	*
	* Other architectures (e.g., ARM) either do not support big endian, or
	* else leave I/O in little endian mode.
	*/
	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
	return __raw_readl(addr);
	else
	return readl_relaxed(addr);
	}

	static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
	{
	/* See brcm_sata_readreg() comments */
	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
	__raw_writel(val, addr);
	else
	writel_relaxed(val, addr);
	}

	static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
	{
	void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
	(port * SATA_TOP_CTRL_PHY_OFFS);
	void __iomem *p;
	u32 reg;

	/* clear PHY_DEFAULT_POWER_STATE */
	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
	reg = brcm_sata_readreg(p);
	reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
	brcm_sata_writereg(reg, p);

	/* reset the PHY digital logic */
	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
	reg = brcm_sata_readreg(p);
	reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG \| SATA_TOP_CTRL_2_SW_RST_OOB \|
	SATA_TOP_CTRL_2_SW_RST_RX);
	reg \|= SATA_TOP_CTRL_2_SW_RST_TX;
	brcm_sata_writereg(reg, p);
	reg = brcm_sata_readreg(p);
	reg \|= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
	brcm_sata_writereg(reg, p);
	reg = brcm_sata_readreg(p);
	reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
	brcm_sata_writereg(reg, p);
	(void)brcm_sata_readreg(p);
	}

	static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
	{
	void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
	(port * SATA_TOP_CTRL_PHY_OFFS);
	void __iomem *p;
	u32 reg;

	/* power-off the PHY digital logic */
	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
	reg = brcm_sata_readreg(p);
	reg \|= (SATA_TOP_CTRL_2_SW_RST_MDIOREG \| SATA_TOP_CTRL_2_SW_RST_OOB \|
	SATA_TOP_CTRL_2_SW_RST_RX \| SATA_TOP_CTRL_2_SW_RST_TX \|
	SATA_TOP_CTRL_2_PHY_GLOBAL_RESET);
	brcm_sata_writereg(reg, p);

	/* set PHY_DEFAULT_POWER_STATE */
	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
	reg = brcm_sata_readreg(p);
	reg \|= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
	brcm_sata_writereg(reg, p);
	}

	static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv)
	{
	int i;

	for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
	if (priv->port_mask & BIT(i))
	brcm_sata_phy_enable(priv, i);
	}

	static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
	{
	int i;

	for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
	if (priv->port_mask & BIT(i))
	brcm_sata_phy_disable(priv, i);
	}

	static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
	struct brcm_ahci_priv *priv)
	{
	void __iomem *ahci;
	struct resource *res;
	u32 impl;

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
	ahci = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(ahci))
	return 0;

	impl = readl(ahci + HOST_PORTS_IMPL);

	if (fls(impl) > SATA_TOP_MAX_PHYS)
	dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
	impl);
	else if (!impl)
	dev_info(priv->dev, "no ports found\n");

	devm_iounmap(&pdev->dev, ahci);
	devm_release_mem_region(&pdev->dev, res->start, resource_size(res));

	return impl;
	}

	static void brcm_sata_init(struct brcm_ahci_priv *priv)
	{
	/* Configure endianness */
	brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF,
	priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
	}

	static int brcm_ahci_suspend(struct device *dev)
	{
	struct ata_host *host = dev_get_drvdata(dev);
	struct ahci_host_priv *hpriv = host->private_data;
	struct brcm_ahci_priv *priv = hpriv->plat_data;
	int ret;

	ret = ahci_platform_suspend(dev);
	brcm_sata_phys_disable(priv);
	return ret;
	}

	static int brcm_ahci_resume(struct device *dev)
	{
	struct ata_host *host = dev_get_drvdata(dev);
	struct ahci_host_priv *hpriv = host->private_data;
	struct brcm_ahci_priv *priv = hpriv->plat_data;

	brcm_sata_init(priv);
	brcm_sata_phys_enable(priv);
	return ahci_platform_resume(dev);
	}

	static struct scsi_host_template ahci_platform_sht = {
	AHCI_SHT(DRV_NAME),
	};

	static int brcm_ahci_probe(struct platform_device *pdev)
	{
	struct device *dev = &pdev->dev;
	struct brcm_ahci_priv *priv;
	struct ahci_host_priv *hpriv;
	struct resource *res;
	int ret;

	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
	return -ENOMEM;
	priv->dev = dev;

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
	priv->top_ctrl = devm_ioremap_resource(dev, res);
	if (IS_ERR(priv->top_ctrl))
	return PTR_ERR(priv->top_ctrl);

	brcm_sata_init(priv);

	priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
	if (!priv->port_mask)
	return -ENODEV;

	brcm_sata_phys_enable(priv);

	hpriv = ahci_platform_get_resources(pdev);
	if (IS_ERR(hpriv))
	return PTR_ERR(hpriv);
	hpriv->plat_data = priv;

	ret = ahci_platform_enable_resources(hpriv);
	if (ret)
	return ret;

	ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
	&ahci_platform_sht);
	if (ret)
	return ret;

	dev_info(dev, "Broadcom AHCI SATA3 registered\n");

	return 0;
	}

	static int brcm_ahci_remove(struct platform_device *pdev)
	{
	struct ata_host *host = dev_get_drvdata(&pdev->dev);
	struct ahci_host_priv *hpriv = host->private_data;
	struct brcm_ahci_priv *priv = hpriv->plat_data;
	int ret;

	ret = ata_platform_remove_one(pdev);
	if (ret)
	return ret;

	brcm_sata_phys_disable(priv);

	return 0;
	}

	static const struct of_device_id ahci_of_match[] = {
	{.compatible = "brcm,bcm7445-ahci"},
	{},
	};
	MODULE_DEVICE_TABLE(of, ahci_of_match);

	static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);

	static struct platform_driver brcm_ahci_driver = {
	.probe = brcm_ahci_probe,
	.remove = brcm_ahci_remove,
	.driver = {
	.name = DRV_NAME,
	.of_match_table = ahci_of_match,
	.pm = &ahci_brcm_pm_ops,
	},
	};
	module_platform_driver(brcm_ahci_driver);

	MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
	MODULE_AUTHOR("Brian Norris");
	MODULE_LICENSE("GPL");
	MODULE_ALIAS("platform:sata-brcmstb");