| /* |
| * include/asm-xtensa/elf.h |
| * |
| * ELF register definitions |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2001 - 2005 Tensilica Inc. |
| */ |
| |
| #ifndef _XTENSA_ELF_H |
| #define _XTENSA_ELF_H |
| |
| #include <asm/ptrace.h> |
| |
| /* Xtensa processor ELF architecture-magic number */ |
| |
| #define EM_XTENSA 94 |
| #define EM_XTENSA_OLD 0xABC7 |
| |
| /* Xtensa relocations defined by the ABIs */ |
| |
| #define R_XTENSA_NONE 0 |
| #define R_XTENSA_32 1 |
| #define R_XTENSA_RTLD 2 |
| #define R_XTENSA_GLOB_DAT 3 |
| #define R_XTENSA_JMP_SLOT 4 |
| #define R_XTENSA_RELATIVE 5 |
| #define R_XTENSA_PLT 6 |
| #define R_XTENSA_OP0 8 |
| #define R_XTENSA_OP1 9 |
| #define R_XTENSA_OP2 10 |
| #define R_XTENSA_ASM_EXPAND 11 |
| #define R_XTENSA_ASM_SIMPLIFY 12 |
| #define R_XTENSA_GNU_VTINHERIT 15 |
| #define R_XTENSA_GNU_VTENTRY 16 |
| #define R_XTENSA_DIFF8 17 |
| #define R_XTENSA_DIFF16 18 |
| #define R_XTENSA_DIFF32 19 |
| #define R_XTENSA_SLOT0_OP 20 |
| #define R_XTENSA_SLOT1_OP 21 |
| #define R_XTENSA_SLOT2_OP 22 |
| #define R_XTENSA_SLOT3_OP 23 |
| #define R_XTENSA_SLOT4_OP 24 |
| #define R_XTENSA_SLOT5_OP 25 |
| #define R_XTENSA_SLOT6_OP 26 |
| #define R_XTENSA_SLOT7_OP 27 |
| #define R_XTENSA_SLOT8_OP 28 |
| #define R_XTENSA_SLOT9_OP 29 |
| #define R_XTENSA_SLOT10_OP 30 |
| #define R_XTENSA_SLOT11_OP 31 |
| #define R_XTENSA_SLOT12_OP 32 |
| #define R_XTENSA_SLOT13_OP 33 |
| #define R_XTENSA_SLOT14_OP 34 |
| #define R_XTENSA_SLOT0_ALT 35 |
| #define R_XTENSA_SLOT1_ALT 36 |
| #define R_XTENSA_SLOT2_ALT 37 |
| #define R_XTENSA_SLOT3_ALT 38 |
| #define R_XTENSA_SLOT4_ALT 39 |
| #define R_XTENSA_SLOT5_ALT 40 |
| #define R_XTENSA_SLOT6_ALT 41 |
| #define R_XTENSA_SLOT7_ALT 42 |
| #define R_XTENSA_SLOT8_ALT 43 |
| #define R_XTENSA_SLOT9_ALT 44 |
| #define R_XTENSA_SLOT10_ALT 45 |
| #define R_XTENSA_SLOT11_ALT 46 |
| #define R_XTENSA_SLOT12_ALT 47 |
| #define R_XTENSA_SLOT13_ALT 48 |
| #define R_XTENSA_SLOT14_ALT 49 |
| |
| /* ELF register definitions. This is needed for core dump support. */ |
| |
| typedef unsigned long elf_greg_t; |
| |
| typedef struct { |
| elf_greg_t pc; |
| elf_greg_t ps; |
| elf_greg_t lbeg; |
| elf_greg_t lend; |
| elf_greg_t lcount; |
| elf_greg_t sar; |
| elf_greg_t windowstart; |
| elf_greg_t reserved[9+48]; |
| elf_greg_t a[64]; |
| } xtensa_gregset_t; |
| |
| #define ELF_NGREG (sizeof(xtensa_gregset_t) / sizeof(elf_greg_t)) |
| |
| typedef elf_greg_t elf_gregset_t[ELF_NGREG]; |
| |
| #define ELF_NFPREG 18 |
| |
| typedef unsigned int elf_fpreg_t; |
| typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; |
| |
| #define ELF_CORE_COPY_REGS(_eregs, _pregs) \ |
| xtensa_elf_core_copy_regs ((xtensa_gregset_t*)&(_eregs), _pregs); |
| |
| extern void xtensa_elf_core_copy_regs (xtensa_gregset_t *, struct pt_regs *); |
| |
| /* |
| * This is used to ensure we don't load something for the wrong architecture. |
| */ |
| |
| #define elf_check_arch(x) ( ( (x)->e_machine == EM_XTENSA ) || \ |
| ( (x)->e_machine == EM_XTENSA_OLD ) ) |
| |
| /* |
| * These are used to set parameters in the core dumps. |
| */ |
| |
| #ifdef __XTENSA_EL__ |
| # define ELF_DATA ELFDATA2LSB |
| #elif defined(__XTENSA_EB__) |
| # define ELF_DATA ELFDATA2MSB |
| #else |
| # error processor byte order undefined! |
| #endif |
| |
| #define ELF_CLASS ELFCLASS32 |
| #define ELF_ARCH EM_XTENSA |
| |
| #define USE_ELF_CORE_DUMP |
| #define ELF_EXEC_PAGESIZE PAGE_SIZE |
| |
| /* |
| * This is the location that an ET_DYN program is loaded if exec'ed. Typical |
| * use of this is to invoke "./ld.so someprog" to test out a new version of |
| * the loader. We need to make sure that it is out of the way of the program |
| * that it will "exec", and that there is sufficient room for the brk. |
| */ |
| |
| #define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) |
| |
| /* |
| * This yields a mask that user programs can use to figure out what |
| * instruction set this CPU supports. This could be done in user space, |
| * but it's not easy, and we've already done it here. |
| */ |
| |
| #define ELF_HWCAP (0) |
| |
| /* |
| * This yields a string that ld.so will use to load implementation |
| * specific libraries for optimization. This is more specific in |
| * intent than poking at uname or /proc/cpuinfo. |
| * For the moment, we have only optimizations for the Intel generations, |
| * but that could change... |
| */ |
| |
| #define ELF_PLATFORM (NULL) |
| |
| /* |
| * The Xtensa processor ABI says that when the program starts, a2 |
| * contains a pointer to a function which might be registered using |
| * `atexit'. This provides a mean for the dynamic linker to call |
| * DT_FINI functions for shared libraries that have been loaded before |
| * the code runs. |
| * |
| * A value of 0 tells we have no such handler. |
| * |
| * We might as well make sure everything else is cleared too (except |
| * for the stack pointer in a1), just to make things more |
| * deterministic. Also, clearing a0 terminates debugger backtraces. |
| */ |
| |
| #define ELF_PLAT_INIT(_r, load_addr) \ |
| do { _r->areg[0]=0; /*_r->areg[1]=0;*/ _r->areg[2]=0; _r->areg[3]=0; \ |
| _r->areg[4]=0; _r->areg[5]=0; _r->areg[6]=0; _r->areg[7]=0; \ |
| _r->areg[8]=0; _r->areg[9]=0; _r->areg[10]=0; _r->areg[11]=0; \ |
| _r->areg[12]=0; _r->areg[13]=0; _r->areg[14]=0; _r->areg[15]=0; \ |
| } while (0) |
| |
| #define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) |
| |
| struct task_struct; |
| |
| extern void do_copy_regs (xtensa_gregset_t*, struct pt_regs*, |
| struct task_struct*); |
| extern void do_restore_regs (xtensa_gregset_t*, struct pt_regs*, |
| struct task_struct*); |
| extern void do_save_fpregs (elf_fpregset_t*, struct pt_regs*, |
| struct task_struct*); |
| extern int do_restore_fpregs (elf_fpregset_t*, struct pt_regs*, |
| struct task_struct*); |
| |
| #endif /* _XTENSA_ELF_H */ |