| /* |
| * TI Common Platform Interrupt Controller (cp_intc) driver |
| * |
| * Author: Steve Chen <schen@mvista.com> |
| * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com> |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| |
| #include <mach/common.h> |
| #include <mach/cp_intc.h> |
| |
| static inline unsigned int cp_intc_read(unsigned offset) |
| { |
| return __raw_readl(davinci_intc_base + offset); |
| } |
| |
| static inline void cp_intc_write(unsigned long value, unsigned offset) |
| { |
| __raw_writel(value, davinci_intc_base + offset); |
| } |
| |
| static void cp_intc_ack_irq(struct irq_data *d) |
| { |
| cp_intc_write(d->irq, CP_INTC_SYS_STAT_IDX_CLR); |
| } |
| |
| /* Disable interrupt */ |
| static void cp_intc_mask_irq(struct irq_data *d) |
| { |
| /* XXX don't know why we need to disable nIRQ here... */ |
| cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR); |
| cp_intc_write(d->irq, CP_INTC_SYS_ENABLE_IDX_CLR); |
| cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); |
| } |
| |
| /* Enable interrupt */ |
| static void cp_intc_unmask_irq(struct irq_data *d) |
| { |
| cp_intc_write(d->irq, CP_INTC_SYS_ENABLE_IDX_SET); |
| } |
| |
| static int cp_intc_set_irq_type(struct irq_data *d, unsigned int flow_type) |
| { |
| unsigned reg = BIT_WORD(d->irq); |
| unsigned mask = BIT_MASK(d->irq); |
| unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg)); |
| unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg)); |
| |
| switch (flow_type) { |
| case IRQ_TYPE_EDGE_RISING: |
| polarity |= mask; |
| type |= mask; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| polarity &= ~mask; |
| type |= mask; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| polarity |= mask; |
| type &= ~mask; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| polarity &= ~mask; |
| type &= ~mask; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg)); |
| cp_intc_write(type, CP_INTC_SYS_TYPE(reg)); |
| |
| return 0; |
| } |
| |
| /* |
| * Faking this allows us to to work with suspend functions of |
| * generic drivers which call {enable|disable}_irq_wake for |
| * wake up interrupt sources (eg RTC on DA850). |
| */ |
| static int cp_intc_set_wake(struct irq_data *d, unsigned int on) |
| { |
| return 0; |
| } |
| |
| static struct irq_chip cp_intc_irq_chip = { |
| .name = "cp_intc", |
| .irq_ack = cp_intc_ack_irq, |
| .irq_mask = cp_intc_mask_irq, |
| .irq_unmask = cp_intc_unmask_irq, |
| .irq_set_type = cp_intc_set_irq_type, |
| .irq_set_wake = cp_intc_set_wake, |
| }; |
| |
| void __init cp_intc_init(void) |
| { |
| unsigned long num_irq = davinci_soc_info.intc_irq_num; |
| u8 *irq_prio = davinci_soc_info.intc_irq_prios; |
| u32 *host_map = davinci_soc_info.intc_host_map; |
| unsigned num_reg = BITS_TO_LONGS(num_irq); |
| int i; |
| |
| davinci_intc_type = DAVINCI_INTC_TYPE_CP_INTC; |
| davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K); |
| if (WARN_ON(!davinci_intc_base)) |
| return; |
| |
| cp_intc_write(0, CP_INTC_GLOBAL_ENABLE); |
| |
| /* Disable all host interrupts */ |
| cp_intc_write(0, CP_INTC_HOST_ENABLE(0)); |
| |
| /* Disable system interrupts */ |
| for (i = 0; i < num_reg; i++) |
| cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i)); |
| |
| /* Set to normal mode, no nesting, no priority hold */ |
| cp_intc_write(0, CP_INTC_CTRL); |
| cp_intc_write(0, CP_INTC_HOST_CTRL); |
| |
| /* Clear system interrupt status */ |
| for (i = 0; i < num_reg; i++) |
| cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i)); |
| |
| /* Enable nIRQ (what about nFIQ?) */ |
| cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); |
| |
| /* |
| * Priority is determined by host channel: lower channel number has |
| * higher priority i.e. channel 0 has highest priority and channel 31 |
| * had the lowest priority. |
| */ |
| num_reg = (num_irq + 3) >> 2; /* 4 channels per register */ |
| if (irq_prio) { |
| unsigned j, k; |
| u32 val; |
| |
| for (k = i = 0; i < num_reg; i++) { |
| for (val = j = 0; j < 4; j++, k++) { |
| val >>= 8; |
| if (k < num_irq) |
| val |= irq_prio[k] << 24; |
| } |
| |
| cp_intc_write(val, CP_INTC_CHAN_MAP(i)); |
| } |
| } else { |
| /* |
| * Default everything to channel 15 if priority not specified. |
| * Note that channel 0-1 are mapped to nFIQ and channels 2-31 |
| * are mapped to nIRQ. |
| */ |
| for (i = 0; i < num_reg; i++) |
| cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i)); |
| } |
| |
| if (host_map) |
| for (i = 0; host_map[i] != -1; i++) |
| cp_intc_write(host_map[i], CP_INTC_HOST_MAP(i)); |
| |
| /* Set up genirq dispatching for cp_intc */ |
| for (i = 0; i < num_irq; i++) { |
| set_irq_chip(i, &cp_intc_irq_chip); |
| set_irq_flags(i, IRQF_VALID | IRQF_PROBE); |
| set_irq_handler(i, handle_edge_irq); |
| } |
| |
| /* Enable global interrupt */ |
| cp_intc_write(1, CP_INTC_GLOBAL_ENABLE); |
| } |