| /* |
| * Synopsys DesignWare I2C adapter driver (master only). |
| * |
| * Based on the TI DAVINCI I2C adapter driver. |
| * |
| * Copyright (C) 2006 Texas Instruments. |
| * Copyright (C) 2007 MontaVista Software Inc. |
| * Copyright (C) 2009 Provigent Ltd. |
| * Copyright (C) 2011 Intel corporation. |
| * |
| * ---------------------------------------------------------------------------- |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * ---------------------------------------------------------------------------- |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/errno.h> |
| #include <linux/sched.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/pci.h> |
| #include <linux/pm_runtime.h> |
| #include "i2c-designware-core.h" |
| |
| #define DRIVER_NAME "i2c-designware-pci" |
| |
| enum dw_pci_ctl_id_t { |
| moorestown_0, |
| moorestown_1, |
| moorestown_2, |
| |
| medfield_0, |
| medfield_1, |
| medfield_2, |
| medfield_3, |
| medfield_4, |
| medfield_5, |
| }; |
| |
| struct dw_pci_controller { |
| u32 bus_num; |
| u32 bus_cfg; |
| u32 tx_fifo_depth; |
| u32 rx_fifo_depth; |
| u32 clk_khz; |
| }; |
| |
| #define INTEL_MID_STD_CFG (DW_IC_CON_MASTER | \ |
| DW_IC_CON_SLAVE_DISABLE | \ |
| DW_IC_CON_RESTART_EN) |
| |
| static struct dw_pci_controller dw_pci_controllers[] = { |
| [moorestown_0] = { |
| .bus_num = 0, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| [moorestown_1] = { |
| .bus_num = 1, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| [moorestown_2] = { |
| .bus_num = 2, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| [medfield_0] = { |
| .bus_num = 0, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| [medfield_1] = { |
| .bus_num = 1, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| [medfield_2] = { |
| .bus_num = 2, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| [medfield_3] = { |
| .bus_num = 3, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| [medfield_4] = { |
| .bus_num = 4, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| [medfield_5] = { |
| .bus_num = 5, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| }; |
| static struct i2c_algorithm i2c_dw_algo = { |
| .master_xfer = i2c_dw_xfer, |
| .functionality = i2c_dw_func, |
| }; |
| |
| static int i2c_dw_pci_suspend(struct device *dev) |
| { |
| struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); |
| struct dw_i2c_dev *i2c = pci_get_drvdata(pdev); |
| int err; |
| |
| |
| i2c_dw_disable(i2c); |
| |
| err = pci_save_state(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "pci_save_state failed\n"); |
| return err; |
| } |
| |
| err = pci_set_power_state(pdev, PCI_D3hot); |
| if (err) { |
| dev_err(&pdev->dev, "pci_set_power_state failed\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int i2c_dw_pci_resume(struct device *dev) |
| { |
| struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); |
| struct dw_i2c_dev *i2c = pci_get_drvdata(pdev); |
| int err; |
| u32 enabled; |
| |
| enabled = i2c_dw_is_enabled(i2c); |
| if (enabled) |
| return 0; |
| |
| err = pci_set_power_state(pdev, PCI_D0); |
| if (err) { |
| dev_err(&pdev->dev, "pci_set_power_state() failed\n"); |
| return err; |
| } |
| |
| pci_restore_state(pdev); |
| |
| i2c_dw_init(i2c); |
| return 0; |
| } |
| |
| static int i2c_dw_pci_runtime_idle(struct device *dev) |
| { |
| int err = pm_schedule_suspend(dev, 500); |
| dev_dbg(dev, "runtime_idle called\n"); |
| |
| if (err != 0) |
| return 0; |
| return -EBUSY; |
| } |
| |
| static const struct dev_pm_ops i2c_dw_pm_ops = { |
| .resume = i2c_dw_pci_resume, |
| .suspend = i2c_dw_pci_suspend, |
| SET_RUNTIME_PM_OPS(i2c_dw_pci_suspend, i2c_dw_pci_resume, |
| i2c_dw_pci_runtime_idle) |
| }; |
| |
| static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev) |
| { |
| return dev->controller->clk_khz; |
| } |
| |
| static int __devinit i2c_dw_pci_probe(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| struct dw_i2c_dev *dev; |
| struct i2c_adapter *adap; |
| unsigned long start, len; |
| void __iomem *base; |
| int r; |
| struct dw_pci_controller *controller; |
| |
| if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) { |
| printk(KERN_ERR "dw_i2c_pci_probe: invalid driver data %ld\n", |
| id->driver_data); |
| return -EINVAL; |
| } |
| |
| controller = &dw_pci_controllers[id->driver_data]; |
| |
| r = pci_enable_device(pdev); |
| if (r) { |
| dev_err(&pdev->dev, "Failed to enable I2C PCI device (%d)\n", |
| r); |
| goto exit; |
| } |
| |
| /* Determine the address of the I2C area */ |
| start = pci_resource_start(pdev, 0); |
| len = pci_resource_len(pdev, 0); |
| if (!start || len == 0) { |
| dev_err(&pdev->dev, "base address not set\n"); |
| r = -ENODEV; |
| goto exit; |
| } |
| |
| r = pci_request_region(pdev, 0, DRIVER_NAME); |
| if (r) { |
| dev_err(&pdev->dev, "failed to request I2C region " |
| "0x%lx-0x%lx\n", start, |
| (unsigned long)pci_resource_end(pdev, 0)); |
| goto exit; |
| } |
| |
| base = ioremap_nocache(start, len); |
| if (!base) { |
| dev_err(&pdev->dev, "I/O memory remapping failed\n"); |
| r = -ENOMEM; |
| goto err_release_region; |
| } |
| |
| |
| dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL); |
| if (!dev) { |
| r = -ENOMEM; |
| goto err_release_region; |
| } |
| |
| init_completion(&dev->cmd_complete); |
| mutex_init(&dev->lock); |
| dev->clk = NULL; |
| dev->controller = controller; |
| dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; |
| dev->base = base; |
| dev->dev = get_device(&pdev->dev); |
| dev->functionality = |
| I2C_FUNC_I2C | |
| I2C_FUNC_SMBUS_BYTE | |
| I2C_FUNC_SMBUS_BYTE_DATA | |
| I2C_FUNC_SMBUS_WORD_DATA | |
| I2C_FUNC_SMBUS_I2C_BLOCK; |
| dev->master_cfg = controller->bus_cfg; |
| |
| pci_set_drvdata(pdev, dev); |
| |
| dev->tx_fifo_depth = controller->tx_fifo_depth; |
| dev->rx_fifo_depth = controller->rx_fifo_depth; |
| r = i2c_dw_init(dev); |
| if (r) |
| goto err_iounmap; |
| |
| adap = &dev->adapter; |
| i2c_set_adapdata(adap, dev); |
| adap->owner = THIS_MODULE; |
| adap->class = 0; |
| adap->algo = &i2c_dw_algo; |
| adap->dev.parent = &pdev->dev; |
| adap->nr = controller->bus_num; |
| snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci-%d", |
| adap->nr); |
| |
| r = request_irq(pdev->irq, i2c_dw_isr, IRQF_SHARED, adap->name, dev); |
| if (r) { |
| dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq); |
| goto err_iounmap; |
| } |
| |
| i2c_dw_disable_int(dev); |
| i2c_dw_clear_int(dev); |
| r = i2c_add_numbered_adapter(adap); |
| if (r) { |
| dev_err(&pdev->dev, "failure adding adapter\n"); |
| goto err_free_irq; |
| } |
| |
| pm_runtime_put_noidle(&pdev->dev); |
| pm_runtime_allow(&pdev->dev); |
| |
| return 0; |
| |
| err_free_irq: |
| free_irq(pdev->irq, dev); |
| err_iounmap: |
| iounmap(dev->base); |
| pci_set_drvdata(pdev, NULL); |
| put_device(&pdev->dev); |
| kfree(dev); |
| err_release_region: |
| pci_release_region(pdev, 0); |
| exit: |
| return r; |
| } |
| |
| static void __devexit i2c_dw_pci_remove(struct pci_dev *pdev) |
| { |
| struct dw_i2c_dev *dev = pci_get_drvdata(pdev); |
| |
| i2c_dw_disable(dev); |
| pm_runtime_forbid(&pdev->dev); |
| pm_runtime_get_noresume(&pdev->dev); |
| |
| pci_set_drvdata(pdev, NULL); |
| i2c_del_adapter(&dev->adapter); |
| put_device(&pdev->dev); |
| |
| free_irq(dev->irq, dev); |
| kfree(dev); |
| pci_release_region(pdev, 0); |
| } |
| |
| /* work with hotplug and coldplug */ |
| MODULE_ALIAS("i2c_designware-pci"); |
| |
| static DEFINE_PCI_DEVICE_TABLE(i2_designware_pci_ids) = { |
| /* Moorestown */ |
| { PCI_VDEVICE(INTEL, 0x0802), moorestown_0 }, |
| { PCI_VDEVICE(INTEL, 0x0803), moorestown_1 }, |
| { PCI_VDEVICE(INTEL, 0x0804), moorestown_2 }, |
| /* Medfield */ |
| { PCI_VDEVICE(INTEL, 0x0817), medfield_3,}, |
| { PCI_VDEVICE(INTEL, 0x0818), medfield_4 }, |
| { PCI_VDEVICE(INTEL, 0x0819), medfield_5 }, |
| { PCI_VDEVICE(INTEL, 0x082C), medfield_0 }, |
| { PCI_VDEVICE(INTEL, 0x082D), medfield_1 }, |
| { PCI_VDEVICE(INTEL, 0x082E), medfield_2 }, |
| { 0,} |
| }; |
| MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids); |
| |
| static struct pci_driver dw_i2c_driver = { |
| .name = DRIVER_NAME, |
| .id_table = i2_designware_pci_ids, |
| .probe = i2c_dw_pci_probe, |
| .remove = __devexit_p(i2c_dw_pci_remove), |
| .driver = { |
| .pm = &i2c_dw_pm_ops, |
| }, |
| }; |
| |
| module_pci_driver(dw_i2c_driver); |
| |
| MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); |
| MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter"); |
| MODULE_LICENSE("GPL"); |