| /* Copyright (c) 2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/msm/msm-bus-ids.h> |
| |
| &soc { |
| /* QUPv3 South instances */ |
| |
| /* |
| * HS UART instances. HS UART usecases can be supported on these |
| * instances only. |
| */ |
| qupv3_se6_4uart: qcom,qup_uart@0x898000 { |
| compatible = "qcom,msm-geni-serial-hs", "qcom,msm-geni-uart"; |
| reg = <0x898000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S6_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se6_4uart_active>; |
| pinctrl-1 = <&qupv3_se6_4uart_sleep>; |
| interrupts = <GIC_SPI 607 0>; |
| status = "disabled"; |
| qcom,bus-mas = <MSM_BUS_MASTER_BLSP_1>; |
| }; |
| |
| qupv3_se7_4uart: qcom,qup_uart@0x89c000 { |
| compatible = "qcom,msm-geni-serial-hs", "qcom,msm-geni-uart"; |
| reg = <0x89c000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S7_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se7_4uart_active>; |
| pinctrl-1 = <&qupv3_se7_4uart_sleep>; |
| interrupts = <GIC_SPI 608 0>; |
| status = "disabled"; |
| qcom,bus-mas = <MSM_BUS_MASTER_BLSP_1>; |
| }; |
| |
| /* I2C */ |
| qupv3_se0_i2c: i2c@880000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0x880000 0x4000>; |
| interrupts = <GIC_SPI 601 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se0_i2c_active>; |
| pinctrl-1 = <&qupv3_se0_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se1_i2c: i2c@884000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0x884000 0x4000>; |
| interrupts = <GIC_SPI 602 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S1_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se1_i2c_active>; |
| pinctrl-1 = <&qupv3_se1_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se2_i2c: i2c@888000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0x888000 0x4000>; |
| interrupts = <GIC_SPI 603 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S2_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se2_i2c_active>; |
| pinctrl-1 = <&qupv3_se2_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se3_i2c: i2c@88c000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0x88c000 0x4000>; |
| interrupts = <GIC_SPI 604 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S3_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se3_i2c_active>; |
| pinctrl-1 = <&qupv3_se3_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se4_i2c: i2c@890000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0x890000 0x4000>; |
| interrupts = <GIC_SPI 605 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S4_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se4_i2c_active>; |
| pinctrl-1 = <&qupv3_se4_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se5_i2c: i2c@894000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0x894000 0x4000>; |
| interrupts = <GIC_SPI 606 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S5_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se5_i2c_active>; |
| pinctrl-1 = <&qupv3_se5_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se6_i2c: i2c@898000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0x898000 0x4000>; |
| interrupts = <GIC_SPI 607 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S6_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se6_i2c_active>; |
| pinctrl-1 = <&qupv3_se6_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se7_i2c: i2c@89c000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0x89c000 0x4000>; |
| interrupts = <GIC_SPI 608 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S7_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se7_i2c_active>; |
| pinctrl-1 = <&qupv3_se7_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| /* SPI */ |
| qupv3_se0_spi: spi@880000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x880000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se0_spi_active>; |
| pinctrl-1 = <&qupv3_se0_spi_sleep>; |
| interrupts = <GIC_SPI 601 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se1_spi: spi@884000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x884000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S1_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se1_spi_active>; |
| pinctrl-1 = <&qupv3_se1_spi_sleep>; |
| interrupts = <GIC_SPI 602 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se2_spi: spi@888000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x888000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S2_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se2_spi_active>; |
| pinctrl-1 = <&qupv3_se2_spi_sleep>; |
| interrupts = <GIC_SPI 603 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se3_spi: spi@88c000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x88c000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S3_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se3_spi_active>; |
| pinctrl-1 = <&qupv3_se3_spi_sleep>; |
| interrupts = <GIC_SPI 604 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se4_spi: spi@890000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x890000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S4_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se4_spi_active>; |
| pinctrl-1 = <&qupv3_se4_spi_sleep>; |
| interrupts = <GIC_SPI 605 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se5_spi: spi@894000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x894000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S5_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se5_spi_active>; |
| pinctrl-1 = <&qupv3_se5_spi_sleep>; |
| interrupts = <GIC_SPI 606 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se6_spi: spi@898000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x898000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S6_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se6_spi_active>; |
| pinctrl-1 = <&qupv3_se6_spi_sleep>; |
| interrupts = <GIC_SPI 607 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se7_spi: spi@89c000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x89c000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP0_S7_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se7_spi_active>; |
| pinctrl-1 = <&qupv3_se7_spi_sleep>; |
| interrupts = <GIC_SPI 608 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| /* QUPv3 North Instances */ |
| /* 2-wire UART */ |
| |
| /* Debug UART Instance for CDP/MTP platform */ |
| qupv3_se9_2uart: qcom,qup_uart@0xa84000 { |
| compatible = "qcom,msm-geni-console", "qcom,msm-geni-uart"; |
| reg = <0xa84000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S1_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se9_2uart_active>; |
| pinctrl-1 = <&qupv3_se9_2uart_sleep>; |
| qcom,bus-mas = <MSM_BUS_MASTER_BLSP_2>; |
| interrupts = <GIC_SPI 354 0>; |
| status = "disabled"; |
| }; |
| |
| /* Debug UART Instance for RUMI platform */ |
| qupv3_se10_2uart: qcom,qup_uart@0xa88000 { |
| compatible = "qcom,msm-geni-console", "qcom,msm-geni-uart"; |
| reg = <0xa88000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S2_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se10_2uart_active>; |
| pinctrl-1 = <&qupv3_se10_2uart_sleep>; |
| interrupts = <GIC_SPI 355 0>; |
| qcom,bus-mas = <MSM_BUS_MASTER_BLSP_2>; |
| status = "disabled"; |
| }; |
| |
| /* I2C */ |
| qupv3_se8_i2c: i2c@a80000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0xa80000 0x4000>; |
| interrupts = <GIC_SPI 353 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S0_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se8_i2c_active>; |
| pinctrl-1 = <&qupv3_se8_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se9_i2c: i2c@a84000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0xa84000 0x4000>; |
| interrupts = <GIC_SPI 354 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S1_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se9_i2c_active>; |
| pinctrl-1 = <&qupv3_se9_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se10_i2c: i2c@a88000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0xa88000 0x4000>; |
| interrupts = <GIC_SPI 355 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S2_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se10_i2c_active>; |
| pinctrl-1 = <&qupv3_se10_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se11_i2c: i2c@a8c000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0xa8c000 0x4000>; |
| interrupts = <GIC_SPI 356 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S3_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se11_i2c_active>; |
| pinctrl-1 = <&qupv3_se11_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se12_i2c: i2c@a90000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0xa90000 0x4000>; |
| interrupts = <GIC_SPI 357 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S4_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se12_i2c_active>; |
| pinctrl-1 = <&qupv3_se12_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se13_i2c: i2c@a94000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0xa94000 0x4000>; |
| interrupts = <GIC_SPI 358 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S5_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se13_i2c_active>; |
| pinctrl-1 = <&qupv3_se13_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se14_i2c: i2c@a98000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0xa98000 0x4000>; |
| interrupts = <GIC_SPI 359 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S6_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se14_i2c_active>; |
| pinctrl-1 = <&qupv3_se14_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se15_i2c: i2c@a9c000 { |
| compatible = "qcom,i2c-geni"; |
| reg = <0xa9c000 0x4000>; |
| interrupts = <GIC_SPI 360 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S7_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se15_i2c_active>; |
| pinctrl-1 = <&qupv3_se15_i2c_sleep>; |
| status = "disabled"; |
| }; |
| |
| /* SPI */ |
| qupv3_se8_spi: spi@a80000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xa80000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S0_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se8_spi_active>; |
| pinctrl-1 = <&qupv3_se8_spi_sleep>; |
| interrupts = <GIC_SPI 353 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se9_spi: spi@a84000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xa84000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S1_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se9_spi_active>; |
| pinctrl-1 = <&qupv3_se9_spi_sleep>; |
| interrupts = <GIC_SPI 354 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se10_spi: spi@a88000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xa88000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S2_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se10_spi_active>; |
| pinctrl-1 = <&qupv3_se10_spi_sleep>; |
| interrupts = <GIC_SPI 355 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se11_spi: spi@a8c000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xa8c000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S3_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se11_spi_active>; |
| pinctrl-1 = <&qupv3_se11_spi_sleep>; |
| interrupts = <GIC_SPI 356 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se12_spi: spi@a90000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xa90000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S4_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se12_spi_active>; |
| pinctrl-1 = <&qupv3_se12_spi_sleep>; |
| interrupts = <GIC_SPI 357 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se13_spi: spi@a94000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xa94000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S5_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se13_spi_active>; |
| pinctrl-1 = <&qupv3_se13_spi_sleep>; |
| interrupts = <GIC_SPI 358 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se14_spi: spi@a98000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xa98000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S6_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se14_spi_active>; |
| pinctrl-1 = <&qupv3_se14_spi_sleep>; |
| interrupts = <GIC_SPI 359 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| |
| qupv3_se15_spi: spi@a9c000 { |
| compatible = "qcom,spi-geni"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xa9c000 0x4000>; |
| reg-names = "se_phys"; |
| clock-names = "se-clk", "m-ahb", "s-ahb"; |
| clocks = <&clock_gcc GCC_QUPV3_WRAP1_S7_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&clock_gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&qupv3_se15_spi_active>; |
| pinctrl-1 = <&qupv3_se15_spi_sleep>; |
| interrupts = <GIC_SPI 360 0>; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| }; |