| /* |
| * GPIO Testing Device Driver |
| * |
| * Copyright (C) 2014 Kamlakant Patel <kamlakant.patel@broadcom.com> |
| * Copyright (C) 2015-2016 Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/platform_device.h> |
| |
| #define GPIO_NAME "gpio-mockup" |
| #define MAX_GC 10 |
| |
| enum direction { |
| OUT, |
| IN |
| }; |
| |
| /* |
| * struct gpio_pin_status - structure describing a GPIO status |
| * @dir: Configures direction of gpio as "in" or "out", 0=in, 1=out |
| * @value: Configures status of the gpio as 0(low) or 1(high) |
| */ |
| struct gpio_pin_status { |
| enum direction dir; |
| bool value; |
| }; |
| |
| struct mockup_gpio_controller { |
| struct gpio_chip gc; |
| struct gpio_pin_status *stats; |
| }; |
| |
| static int gpio_mockup_ranges[MAX_GC << 1]; |
| static int gpio_mockup_params_nr; |
| module_param_array(gpio_mockup_ranges, int, &gpio_mockup_params_nr, 0400); |
| |
| const char pins_name_start = 'A'; |
| |
| static int mockup_gpio_get(struct gpio_chip *gc, unsigned int offset) |
| { |
| struct mockup_gpio_controller *cntr = gpiochip_get_data(gc); |
| |
| return cntr->stats[offset].value; |
| } |
| |
| static void mockup_gpio_set(struct gpio_chip *gc, unsigned int offset, |
| int value) |
| { |
| struct mockup_gpio_controller *cntr = gpiochip_get_data(gc); |
| |
| cntr->stats[offset].value = !!value; |
| } |
| |
| static int mockup_gpio_dirout(struct gpio_chip *gc, unsigned int offset, |
| int value) |
| { |
| struct mockup_gpio_controller *cntr = gpiochip_get_data(gc); |
| |
| mockup_gpio_set(gc, offset, value); |
| cntr->stats[offset].dir = OUT; |
| return 0; |
| } |
| |
| static int mockup_gpio_dirin(struct gpio_chip *gc, unsigned int offset) |
| { |
| struct mockup_gpio_controller *cntr = gpiochip_get_data(gc); |
| |
| cntr->stats[offset].dir = IN; |
| return 0; |
| } |
| |
| static int mockup_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) |
| { |
| struct mockup_gpio_controller *cntr = gpiochip_get_data(gc); |
| |
| return cntr->stats[offset].dir; |
| } |
| |
| static int mockup_gpio_add(struct device *dev, |
| struct mockup_gpio_controller *cntr, |
| const char *name, int base, int ngpio) |
| { |
| int ret; |
| |
| cntr->gc.base = base; |
| cntr->gc.ngpio = ngpio; |
| cntr->gc.label = name; |
| cntr->gc.owner = THIS_MODULE; |
| cntr->gc.parent = dev; |
| cntr->gc.get = mockup_gpio_get; |
| cntr->gc.set = mockup_gpio_set; |
| cntr->gc.direction_output = mockup_gpio_dirout; |
| cntr->gc.direction_input = mockup_gpio_dirin; |
| cntr->gc.get_direction = mockup_gpio_get_direction; |
| cntr->stats = devm_kzalloc(dev, sizeof(*cntr->stats) * cntr->gc.ngpio, |
| GFP_KERNEL); |
| if (!cntr->stats) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| ret = devm_gpiochip_add_data(dev, &cntr->gc, cntr); |
| if (ret) |
| goto err; |
| |
| dev_info(dev, "gpio<%d..%d> add successful!", base, base + ngpio); |
| return 0; |
| err: |
| dev_err(dev, "gpio<%d..%d> add failed!", base, base + ngpio); |
| return ret; |
| } |
| |
| static int mockup_gpio_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct mockup_gpio_controller *cntr; |
| int ret; |
| int i; |
| int base; |
| int ngpio; |
| char *chip_name; |
| |
| if (gpio_mockup_params_nr < 2) |
| return -EINVAL; |
| |
| cntr = devm_kzalloc(dev, sizeof(*cntr) * (gpio_mockup_params_nr >> 1), |
| GFP_KERNEL); |
| if (!cntr) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, cntr); |
| |
| for (i = 0; i < gpio_mockup_params_nr >> 1; i++) { |
| base = gpio_mockup_ranges[i * 2]; |
| if (base == -1) |
| ngpio = gpio_mockup_ranges[i * 2 + 1]; |
| else |
| ngpio = gpio_mockup_ranges[i * 2 + 1] - base; |
| |
| if (ngpio >= 0) { |
| chip_name = devm_kasprintf(dev, GFP_KERNEL, |
| "%s-%c", GPIO_NAME, |
| pins_name_start + i); |
| if (!chip_name) |
| return -ENOMEM; |
| |
| ret = mockup_gpio_add(dev, &cntr[i], |
| chip_name, base, ngpio); |
| } else { |
| ret = -1; |
| } |
| if (ret) { |
| if (base < 0) |
| dev_err(dev, "gpio<%d..%d> add failed\n", |
| base, ngpio); |
| else |
| dev_err(dev, "gpio<%d..%d> add failed\n", |
| base, base + ngpio); |
| |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver mockup_gpio_driver = { |
| .driver = { |
| .name = GPIO_NAME, |
| }, |
| .probe = mockup_gpio_probe, |
| }; |
| |
| static struct platform_device *pdev; |
| static int __init mock_device_init(void) |
| { |
| int err; |
| |
| pdev = platform_device_alloc(GPIO_NAME, -1); |
| if (!pdev) |
| return -ENOMEM; |
| |
| err = platform_device_add(pdev); |
| if (err) { |
| platform_device_put(pdev); |
| return err; |
| } |
| |
| err = platform_driver_register(&mockup_gpio_driver); |
| if (err) { |
| platform_device_unregister(pdev); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit mock_device_exit(void) |
| { |
| platform_driver_unregister(&mockup_gpio_driver); |
| platform_device_unregister(pdev); |
| } |
| |
| module_init(mock_device_init); |
| module_exit(mock_device_exit); |
| |
| MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>"); |
| MODULE_AUTHOR("Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>"); |
| MODULE_DESCRIPTION("GPIO Testing driver"); |
| MODULE_LICENSE("GPL v2"); |