drm/i915: Unduplicate CHV phy-releated pre pll enabling code
The same logic is used for DP and HDMI so move it to intel_dpio_phy.c.
v2: Rebase
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461761065-21195-5-git-send-email-ander.conselvan.de.oliveira@intel.com
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 9d8b70f..e6d7c02 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -131,11 +131,6 @@
enum pipe pipe);
static void intel_dp_unset_edid(struct intel_dp *intel_dp);
-static unsigned int intel_dp_unused_lane_mask(int lane_count)
-{
- return ~((1 << lane_count) - 1) & 0xf;
-}
-
static int
intel_dp_max_link_bw(struct intel_dp *intel_dp)
{
@@ -2915,85 +2910,9 @@
static void chv_dp_pre_pll_enable(struct intel_encoder *encoder)
{
- struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
- struct drm_device *dev = encoder->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc =
- to_intel_crtc(encoder->base.crtc);
- enum dpio_channel ch = vlv_dport_to_channel(dport);
- enum pipe pipe = intel_crtc->pipe;
- unsigned int lane_mask =
- intel_dp_unused_lane_mask(intel_crtc->config->lane_count);
- u32 val;
-
intel_dp_prepare(encoder);
- /*
- * Must trick the second common lane into life.
- * Otherwise we can't even access the PLL.
- */
- if (ch == DPIO_CH0 && pipe == PIPE_B)
- dport->release_cl2_override =
- !chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, true);
-
- chv_phy_powergate_lanes(encoder, true, lane_mask);
-
- mutex_lock(&dev_priv->sb_lock);
-
- /* Assert data lane reset */
- chv_data_lane_soft_reset(encoder, true);
-
- /* program left/right clock distribution */
- if (pipe != PIPE_B) {
- val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
- val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
- if (ch == DPIO_CH0)
- val |= CHV_BUFLEFTENA1_FORCE;
- if (ch == DPIO_CH1)
- val |= CHV_BUFRIGHTENA1_FORCE;
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
- } else {
- val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
- val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
- if (ch == DPIO_CH0)
- val |= CHV_BUFLEFTENA2_FORCE;
- if (ch == DPIO_CH1)
- val |= CHV_BUFRIGHTENA2_FORCE;
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
- }
-
- /* program clock channel usage */
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch));
- val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
- if (pipe != PIPE_B)
- val &= ~CHV_PCS_USEDCLKCHANNEL;
- else
- val |= CHV_PCS_USEDCLKCHANNEL;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val);
-
- if (intel_crtc->config->lane_count > 2) {
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch));
- val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
- if (pipe != PIPE_B)
- val &= ~CHV_PCS_USEDCLKCHANNEL;
- else
- val |= CHV_PCS_USEDCLKCHANNEL;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val);
- }
-
- /*
- * This a a bit weird since generally CL
- * matches the pipe, but here we need to
- * pick the CL based on the port.
- */
- val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch));
- if (pipe != PIPE_B)
- val &= ~CHV_CMN_USEDCLKCHANNEL;
- else
- val |= CHV_CMN_USEDCLKCHANNEL;
- vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val);
-
- mutex_unlock(&dev_priv->sb_lock);
+ chv_phy_pre_pll_enable(encoder);
}
static void chv_dp_post_pll_disable(struct intel_encoder *encoder)