arch/arm/boot/dts/vfxxx.dtsi - kernel/msm-4.9 - Gitiles

 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 #include "vf610-pinfunc.h"
 #include <dt-bindings/clock/vf610-clock.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>

 / {
 	aliases {
 		can0 = &can0;
 		can1 = &can1;
 		ethernet0 = &fec0;
 		ethernet1 = &fec1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
 		serial3 = &uart3;
 		serial4 = &uart4;
 		serial5 = &uart5;
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
 		gpio3 = &gpio3;
 		gpio4 = &gpio4;
 		usbphy0 = &usbphy0;
 		usbphy1 = &usbphy1;
 	};

 	fxosc: fxosc {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};

 	sxosc: sxosc {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 	};

 	reboot: syscon-reboot {
 		compatible = "syscon-reboot";
 		regmap = <&src>;
 		offset = <0x0>;
 		mask = <0x1000>;
 	};

 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&mscm_ir>;
 		ranges;

 		aips0: aips-bus@40000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;

 			mscm_cpucfg: cpucfg@40001000 {
 				compatible = "fsl,vf610-mscm-cpucfg", "syscon";
 				reg = <0x40001000 0x800>;
 			};

 			mscm_ir: interrupt-controller@40001800 {
 				compatible = "fsl,vf610-mscm-ir";
 				reg = <0x40001800 0x400>;
 				fsl,cpucfg = <&mscm_cpucfg>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 			};

 			edma0: dma-controller@40018000 {
 				#dma-cells = <2>;
 				compatible = "fsl,vf610-edma";
 				reg = <0x40018000 0x2000>,
 					<0x40024000 0x1000>,
 					<0x40025000 0x1000>;
 				dma-channels = <32>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
 						<9 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "edma-tx", "edma-err";
 				clock-names = "dmamux0", "dmamux1";
 				clocks = <&clks VF610_CLK_DMAMUX0>,
 					<&clks VF610_CLK_DMAMUX1>;
 				status = "disabled";
 			};

 			can0: flexcan@40020000 {
 				compatible = "fsl,vf610-flexcan";
 				reg = <0x40020000 0x4000>;
 				interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_FLEXCAN0>,
 					 <&clks VF610_CLK_FLEXCAN0>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

 			uart0: serial@40027000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x40027000 0x1000>;
 				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART0>;
 				clock-names = "ipg";
 				dmas = <&edma0 0 2>,
 					<&edma0 0 3>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};

 			uart1: serial@40028000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x40028000 0x1000>;
 				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART1>;
 				clock-names = "ipg";
 				dmas = <&edma0 0 4>,
 					<&edma0 0 5>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};

 			uart2: serial@40029000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x40029000 0x1000>;
 				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART2>;
 				clock-names = "ipg";
 				dmas = <&edma0 0 6>,
 					<&edma0 0 7>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};

 			uart3: serial@4002a000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x4002a000 0x1000>;
 				interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART3>;
 				clock-names = "ipg";
 				dmas = <&edma0 0 8>,
 					<&edma0 0 9>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};

 			dspi0: dspi0@4002c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
 				reg = <0x4002c000 0x1000>;
 				interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
 				spi-num-chipselects = <6>;
 				status = "disabled";
 			};

 			dspi1: dspi1@4002d000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
 				reg = <0x4002d000 0x1000>;
 				interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_DSPI1>;
 				clock-names = "dspi";
 				spi-num-chipselects = <4>;
 				status = "disabled";
 			};

 			sai0: sai@4002f000 {
 				compatible = "fsl,vf610-sai";
 				reg = <0x4002f000 0x1000>;
 				interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_SAI0>,
 					<&clks VF610_CLK_SAI0_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
 				dma-names = "tx", "rx";
 				dmas = <&edma0 0 17>,
 					<&edma0 0 16>;
 				status = "disabled";
 			};

 			sai1: sai@40030000 {
 				compatible = "fsl,vf610-sai";
 				reg = <0x40030000 0x1000>;
 				interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_SAI1>,
 					<&clks VF610_CLK_SAI1_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
 				dma-names = "tx", "rx";
 				dmas = <&edma0 0 19>,
 					<&edma0 0 18>;
 				status = "disabled";
 			};

 			sai2: sai@40031000 {
 				compatible = "fsl,vf610-sai";
 				reg = <0x40031000 0x1000>;
 				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_SAI2>,
 					<&clks VF610_CLK_SAI2_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
 				dma-names = "tx", "rx";
 				dmas = <&edma0 0 21>,
 					<&edma0 0 20>;
 				status = "disabled";
 			};

 			sai3: sai@40032000 {
 				compatible = "fsl,vf610-sai";
 				reg = <0x40032000 0x1000>;
 				interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_SAI3>,
 					<&clks VF610_CLK_SAI3_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
 				dma-names = "tx", "rx";
 				dmas = <&edma0 1 9>,
 					<&edma0 1 8>;
 				status = "disabled";
 			};

 			pit: pit@40037000 {
 				compatible = "fsl,vf610-pit";
 				reg = <0x40037000 0x1000>;
 				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_PIT>;
 				clock-names = "pit";
 			};

 			pwm0: pwm@40038000 {
 				compatible = "fsl,vf610-ftm-pwm";
 				#pwm-cells = <3>;
 				reg = <0x40038000 0x1000>;
 				clock-names = "ftm_sys", "ftm_ext",
 					      "ftm_fix", "ftm_cnt_clk_en";
 				clocks = <&clks VF610_CLK_FTM0>,
 					<&clks VF610_CLK_FTM0_EXT_SEL>,
 					<&clks VF610_CLK_FTM0_FIX_SEL>,
 					<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
 				status = "disabled";
 			};

 			pwm1: pwm@40039000 {
 				compatible = "fsl,vf610-ftm-pwm";
 				#pwm-cells = <3>;
 				reg = <0x40039000 0x1000>;
 				clock-names = "ftm_sys", "ftm_ext",
 					      "ftm_fix", "ftm_cnt_clk_en";
 				clocks = <&clks VF610_CLK_FTM1>,
 					<&clks VF610_CLK_FTM1_EXT_SEL>,
 					<&clks VF610_CLK_FTM1_FIX_SEL>,
 					<&clks VF610_CLK_FTM1_EXT_FIX_EN>;
 				status = "disabled";
 			};

 			adc0: adc@4003b000 {
 				compatible = "fsl,vf610-adc";
 				reg = <0x4003b000 0x1000>;
 				interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ADC0>;
 				clock-names = "adc";
 				#io-channel-cells = <1>;
 				status = "disabled";
 				fsl,adck-max-frequency = <30000000>, <40000000>,
 							<20000000>;
 			};

 			wdoga5: wdog@4003e000 {
 				compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
 				reg = <0x4003e000 0x1000>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_WDT>;
 				clock-names = "wdog";
 				status = "disabled";
 			};

 			qspi0: quadspi@40044000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-qspi";
 				reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
 				reg-names = "QuadSPI", "QuadSPI-memory";
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_QSPI0_EN>,
 					<&clks VF610_CLK_QSPI0>;
 				clock-names = "qspi_en", "qspi";
 				status = "disabled";
 			};

 			iomuxc: iomuxc@40048000 {
 				compatible = "fsl,vf610-iomuxc";
 				reg = <0x40048000 0x1000>;
 			};

 			gpio0: gpio@40049000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x40049000 0x1000 0x400ff000 0x40>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 0 32>;
 			};

 			gpio1: gpio@4004a000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x4004a000 0x1000 0x400ff040 0x40>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 32 32>;
 			};

 			gpio2: gpio@4004b000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x4004b000 0x1000 0x400ff080 0x40>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 64 32>;
 			};

 			gpio3: gpio@4004c000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 96 32>;
 			};

 			gpio4: gpio@4004d000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x4004d000 0x1000 0x400ff100 0x40>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 128 7>;
 			};

 			anatop: anatop@40050000 {
 				compatible = "fsl,vf610-anatop", "syscon";
 				reg = <0x40050000 0x400>;
 			};

 			usbphy0: usbphy@40050800 {
 				compatible = "fsl,vf610-usbphy";
 				reg = <0x40050800 0x400>;
 				interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_USBPHY0>;
 				fsl,anatop = <&anatop>;
 				status = "disabled";
 			};

 			usbphy1: usbphy@40050c00 {
 				compatible = "fsl,vf610-usbphy";
 				reg = <0x40050c00 0x400>;
 				interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_USBPHY1>;
 				fsl,anatop = <&anatop>;
 				status = "disabled";
 			};

 			i2c0: i2c@40066000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-i2c";
 				reg = <0x40066000 0x1000>;
 				interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_I2C0>;
 				clock-names = "ipg";
 				dmas = <&edma0 0 50>,
 					<&edma0 0 51>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};

 			i2c1: i2c@40067000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-i2c";
 				reg = <0x40067000 0x1000>;
 				interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_I2C1>;
 				clock-names = "ipg";
 				dmas = <&edma0 0 52>,
 					<&edma0 0 53>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};

 			clks: ccm@4006b000 {
 				compatible = "fsl,vf610-ccm";
 				reg = <0x4006b000 0x1000>;
 				clocks = <&sxosc>, <&fxosc>;
 				clock-names = "sxosc", "fxosc";
 				#clock-cells = <1>;
 			};

 			usbdev0: usb@40034000 {
 				compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 				reg = <0x40034000 0x800>;
 				interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_USBC0>;
 				fsl,usbphy = <&usbphy0>;
 				fsl,usbmisc = <&usbmisc0 0>;
 				dr_mode = "peripheral";
 				status = "disabled";
 			};

 			usbmisc0: usb@40034800 {
 				#index-cells = <1>;
 				compatible = "fsl,vf610-usbmisc";
 				reg = <0x40034800 0x200>;
 				clocks = <&clks VF610_CLK_USBC0>;
 				status = "disabled";
 			};

 			src: src@4006e000 {
 				compatible = "fsl,vf610-src", "syscon";
 				reg = <0x4006e000 0x1000>;
 				interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};

 		aips1: aips-bus@40080000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;

 			edma1: dma-controller@40098000 {
 				#dma-cells = <2>;
 				compatible = "fsl,vf610-edma";
 				reg = <0x40098000 0x2000>,
 					<0x400a1000 0x1000>,
 					<0x400a2000 0x1000>;
 				dma-channels = <32>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
 						<11 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "edma-tx", "edma-err";
 				clock-names = "dmamux0", "dmamux1";
 				clocks = <&clks VF610_CLK_DMAMUX2>,
 					<&clks VF610_CLK_DMAMUX3>;
 				status = "disabled";
 			};

 			snvs0: snvs@400a7000 {
 			    compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 				reg = <0x400a7000 0x2000>;

 				snvsrtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
 					regmap = <&snvs0>;
 					offset = <0x34>;
 					interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks VF610_CLK_SNVS>;
 					clock-names = "snvs-rtc";
 				};
 			};

 			uart4: serial@400a9000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x400a9000 0x1000>;
 				interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART4>;
 				clock-names = "ipg";
 				status = "disabled";
 			};

 			uart5: serial@400aa000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x400aa000 0x1000>;
 				interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART5>;
 				clock-names = "ipg";
 				status = "disabled";
 			};

 			dspi2: dspi2@400ac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
 				reg = <0x400ac000 0x1000>;
 				interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_DSPI2>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
 				status = "disabled";
 			};

 			dspi3: dspi3@400ad000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
 				reg = <0x400ad000 0x1000>;
 				interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_DSPI3>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
 				status = "disabled";
 			};

 			adc1: adc@400bb000 {
 				compatible = "fsl,vf610-adc";
 				reg = <0x400bb000 0x1000>;
 				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ADC1>;
 				clock-names = "adc";
 				#io-channel-cells = <1>;
 				status = "disabled";
 				fsl,adck-max-frequency = <30000000>, <40000000>,
 							<20000000>;
 			};

 			esdhc0: esdhc@400b1000 {
 				compatible = "fsl,imx53-esdhc";
 				reg = <0x400b1000 0x1000>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_IPG_BUS>,
 					<&clks VF610_CLK_PLATFORM_BUS>,
 					<&clks VF610_CLK_ESDHC0>;
 				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};

 			esdhc1: esdhc@400b2000 {
 				compatible = "fsl,imx53-esdhc";
 				reg = <0x400b2000 0x1000>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_IPG_BUS>,
 					<&clks VF610_CLK_PLATFORM_BUS>,
 					<&clks VF610_CLK_ESDHC1>;
 				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};

 			usbh1: usb@400b4000 {
 				compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 				reg = <0x400b4000 0x800>;
 				interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_USBC1>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc1 0>;
 				dr_mode = "host";
 				status = "disabled";
 			};

 			usbmisc1: usb@400b4800 {
 				#index-cells = <1>;
 				compatible = "fsl,vf610-usbmisc";
 				reg = <0x400b4800 0x200>;
 				clocks = <&clks VF610_CLK_USBC1>;
 				status = "disabled";
 			};

 			ftm: ftm@400b8000 {
 				compatible = "fsl,ftm-timer";
 				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
 				interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "ftm-evt", "ftm-src",
 					"ftm-evt-counter-en", "ftm-src-counter-en";
 				clocks = <&clks VF610_CLK_FTM2>,
 					<&clks VF610_CLK_FTM3>,
 					<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
 					<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
 				status = "disabled";
 			};

 			qspi1: quadspi@400c4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-qspi";
 				reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
 				reg-names = "QuadSPI", "QuadSPI-memory";
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_QSPI1_EN>,
 					<&clks VF610_CLK_QSPI1>;
 				clock-names = "qspi_en", "qspi";
 				status = "disabled";
 			};

 			dac0: dac@400cc000 {
 				compatible = "fsl,vf610-dac";
 				reg = <0x400cc000 1000>;
 				interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "dac";
 				clocks = <&clks VF610_CLK_DAC0>;
 				status = "disabled";
 			};

 			dac1: dac@400cd000 {
 				compatible = "fsl,vf610-dac";
 				reg = <0x400cd000 1000>;
 				interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "dac";
 				clocks = <&clks VF610_CLK_DAC1>;
 				status = "disabled";
 			};

 			fec0: ethernet@400d0000 {
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d0000 0x1000>;
 				interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ENET0>,
 					<&clks VF610_CLK_ENET0>,
 					<&clks VF610_CLK_ENET>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};

 			fec1: ethernet@400d1000 {
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d1000 0x1000>;
 				interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ENET1>,
 					<&clks VF610_CLK_ENET1>,
 					<&clks VF610_CLK_ENET>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};

 			can1: flexcan@400d4000 {
 				compatible = "fsl,vf610-flexcan";
 				reg = <0x400d4000 0x4000>;
 				interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_FLEXCAN1>,
 					 <&clks VF610_CLK_FLEXCAN1>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

 			nfc: nand@400e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-nfc";
 				reg = <0x400e0000 0x4000>;
 				interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_NFC>;
 				clock-names = "nfc";
 				status = "disabled";
 			};

 			i2c2: i2c@400e6000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-i2c";
 				reg = <0x400e6000 0x1000>;
 				interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_I2C2>;
 				clock-names = "ipg";
 				dmas = <&edma0 1 36>,
 					<&edma0 1 37>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};

 			i2c3: i2c@400e7000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-i2c";
 				reg = <0x400e7000 0x1000>;
 				interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_I2C3>;
 				clock-names = "ipg";
 				dmas = <&edma0 1 38>,
 					<&edma0 1 39>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
 		};

 		iio-hwmon {
 			compatible = "iio-hwmon";
 			io-channels = <&adc0 16>, <&adc1 16>;
 		};
 	};
 };
	/*
	* Copyright 2013 Freescale Semiconductor, Inc.
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* version 2 as published by the Free Software Foundation.
	*
	* This file is distributed in the hope that it will be useful
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	#include "vf610-pinfunc.h"
	#include <dt-bindings/clock/vf610-clock.h>
	#include <dt-bindings/interrupt-controller/irq.h>
	#include <dt-bindings/gpio/gpio.h>

	/ {
	aliases {
	can0 = &can0;
	can1 = &can1;
	ethernet0 = &fec0;
	ethernet1 = &fec1;
	serial0 = &uart0;
	serial1 = &uart1;
	serial2 = &uart2;
	serial3 = &uart3;
	serial4 = &uart4;
	serial5 = &uart5;
	gpio0 = &gpio0;
	gpio1 = &gpio1;
	gpio2 = &gpio2;
	gpio3 = &gpio3;
	gpio4 = &gpio4;
	usbphy0 = &usbphy0;
	usbphy1 = &usbphy1;
	};

	fxosc: fxosc {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <24000000>;
	};

	sxosc: sxosc {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <32768>;
	};

	reboot: syscon-reboot {
	compatible = "syscon-reboot";
	regmap = <&src>;
	offset = <0x0>;
	mask = <0x1000>;
	};

	soc {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "simple-bus";
	interrupt-parent = <&mscm_ir>;
	ranges;

	aips0: aips-bus@40000000 {
	compatible = "fsl,aips-bus", "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges;

	mscm_cpucfg: cpucfg@40001000 {
	compatible = "fsl,vf610-mscm-cpucfg", "syscon";
	reg = <0x40001000 0x800>;
	};

	mscm_ir: interrupt-controller@40001800 {
	compatible = "fsl,vf610-mscm-ir";
	reg = <0x40001800 0x400>;
	fsl,cpucfg = <&mscm_cpucfg>;
	interrupt-controller;
	#interrupt-cells = <2>;
	};

	edma0: dma-controller@40018000 {
	#dma-cells = <2>;
	compatible = "fsl,vf610-edma";
	reg = <0x40018000 0x2000>,
	<0x40024000 0x1000>,
	<0x40025000 0x1000>;
	dma-channels = <32>;
	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
	<9 IRQ_TYPE_LEVEL_HIGH>;
	interrupt-names = "edma-tx", "edma-err";
	clock-names = "dmamux0", "dmamux1";
	clocks = <&clks VF610_CLK_DMAMUX0>,
	<&clks VF610_CLK_DMAMUX1>;
	status = "disabled";
	};

	can0: flexcan@40020000 {
	compatible = "fsl,vf610-flexcan";
	reg = <0x40020000 0x4000>;
	interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_FLEXCAN0>,
	<&clks VF610_CLK_FLEXCAN0>;
	clock-names = "ipg", "per";
	status = "disabled";
	};

	uart0: serial@40027000 {
	compatible = "fsl,vf610-lpuart";
	reg = <0x40027000 0x1000>;
	interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_UART0>;
	clock-names = "ipg";
	dmas = <&edma0 0 2>,
	<&edma0 0 3>;
	dma-names = "rx","tx";
	status = "disabled";
	};

	uart1: serial@40028000 {
	compatible = "fsl,vf610-lpuart";
	reg = <0x40028000 0x1000>;
	interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_UART1>;
	clock-names = "ipg";
	dmas = <&edma0 0 4>,
	<&edma0 0 5>;
	dma-names = "rx","tx";
	status = "disabled";
	};

	uart2: serial@40029000 {
	compatible = "fsl,vf610-lpuart";
	reg = <0x40029000 0x1000>;
	interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_UART2>;
	clock-names = "ipg";
	dmas = <&edma0 0 6>,
	<&edma0 0 7>;
	dma-names = "rx","tx";
	status = "disabled";
	};

	uart3: serial@4002a000 {
	compatible = "fsl,vf610-lpuart";
	reg = <0x4002a000 0x1000>;
	interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_UART3>;
	clock-names = "ipg";
	dmas = <&edma0 0 8>,
	<&edma0 0 9>;
	dma-names = "rx","tx";
	status = "disabled";
	};

	dspi0: dspi0@4002c000 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "fsl,vf610-dspi";
	reg = <0x4002c000 0x1000>;
	interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_DSPI0>;
	clock-names = "dspi";
	spi-num-chipselects = <6>;
	status = "disabled";
	};

	dspi1: dspi1@4002d000 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "fsl,vf610-dspi";
	reg = <0x4002d000 0x1000>;
	interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_DSPI1>;
	clock-names = "dspi";
	spi-num-chipselects = <4>;
	status = "disabled";
	};

	sai0: sai@4002f000 {
	compatible = "fsl,vf610-sai";
	reg = <0x4002f000 0x1000>;
	interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_SAI0>,
	<&clks VF610_CLK_SAI0_DIV>,
	<&clks 0>, <&clks 0>;
	clock-names = "bus", "mclk1", "mclk2", "mclk3";
	dma-names = "tx", "rx";
	dmas = <&edma0 0 17>,
	<&edma0 0 16>;
	status = "disabled";
	};

	sai1: sai@40030000 {
	compatible = "fsl,vf610-sai";
	reg = <0x40030000 0x1000>;
	interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_SAI1>,
	<&clks VF610_CLK_SAI1_DIV>,
	<&clks 0>, <&clks 0>;
	clock-names = "bus", "mclk1", "mclk2", "mclk3";
	dma-names = "tx", "rx";
	dmas = <&edma0 0 19>,
	<&edma0 0 18>;
	status = "disabled";
	};

	sai2: sai@40031000 {
	compatible = "fsl,vf610-sai";
	reg = <0x40031000 0x1000>;
	interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_SAI2>,
	<&clks VF610_CLK_SAI2_DIV>,
	<&clks 0>, <&clks 0>;
	clock-names = "bus", "mclk1", "mclk2", "mclk3";
	dma-names = "tx", "rx";
	dmas = <&edma0 0 21>,
	<&edma0 0 20>;
	status = "disabled";
	};

	sai3: sai@40032000 {
	compatible = "fsl,vf610-sai";
	reg = <0x40032000 0x1000>;
	interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_SAI3>,
	<&clks VF610_CLK_SAI3_DIV>,
	<&clks 0>, <&clks 0>;
	clock-names = "bus", "mclk1", "mclk2", "mclk3";
	dma-names = "tx", "rx";
	dmas = <&edma0 1 9>,
	<&edma0 1 8>;
	status = "disabled";
	};

	pit: pit@40037000 {
	compatible = "fsl,vf610-pit";
	reg = <0x40037000 0x1000>;
	interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_PIT>;
	clock-names = "pit";
	};

	pwm0: pwm@40038000 {
	compatible = "fsl,vf610-ftm-pwm";
	#pwm-cells = <3>;
	reg = <0x40038000 0x1000>;
	clock-names = "ftm_sys", "ftm_ext",
	"ftm_fix", "ftm_cnt_clk_en";
	clocks = <&clks VF610_CLK_FTM0>,
	<&clks VF610_CLK_FTM0_EXT_SEL>,
	<&clks VF610_CLK_FTM0_FIX_SEL>,
	<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
	status = "disabled";
	};

	pwm1: pwm@40039000 {
	compatible = "fsl,vf610-ftm-pwm";
	#pwm-cells = <3>;
	reg = <0x40039000 0x1000>;
	clock-names = "ftm_sys", "ftm_ext",
	"ftm_fix", "ftm_cnt_clk_en";
	clocks = <&clks VF610_CLK_FTM1>,
	<&clks VF610_CLK_FTM1_EXT_SEL>,
	<&clks VF610_CLK_FTM1_FIX_SEL>,
	<&clks VF610_CLK_FTM1_EXT_FIX_EN>;
	status = "disabled";
	};

	adc0: adc@4003b000 {
	compatible = "fsl,vf610-adc";
	reg = <0x4003b000 0x1000>;
	interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_ADC0>;
	clock-names = "adc";
	#io-channel-cells = <1>;
	status = "disabled";
	fsl,adck-max-frequency = <30000000>, <40000000>,
	<20000000>;
	};

	wdoga5: wdog@4003e000 {
	compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
	reg = <0x4003e000 0x1000>;
	interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_WDT>;
	clock-names = "wdog";
	status = "disabled";
	};

	qspi0: quadspi@40044000 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "fsl,vf610-qspi";
	reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
	reg-names = "QuadSPI", "QuadSPI-memory";
	interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_QSPI0_EN>,
	<&clks VF610_CLK_QSPI0>;
	clock-names = "qspi_en", "qspi";
	status = "disabled";
	};

	iomuxc: iomuxc@40048000 {
	compatible = "fsl,vf610-iomuxc";
	reg = <0x40048000 0x1000>;
	};

	gpio0: gpio@40049000 {
	compatible = "fsl,vf610-gpio";
	reg = <0x40049000 0x1000 0x400ff000 0x40>;
	gpio-controller;
	#gpio-cells = <2>;
	interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
	interrupt-controller;
	#interrupt-cells = <2>;
	gpio-ranges = <&iomuxc 0 0 32>;
	};

	gpio1: gpio@4004a000 {
	compatible = "fsl,vf610-gpio";
	reg = <0x4004a000 0x1000 0x400ff040 0x40>;
	gpio-controller;
	#gpio-cells = <2>;
	interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
	interrupt-controller;
	#interrupt-cells = <2>;
	gpio-ranges = <&iomuxc 0 32 32>;
	};

	gpio2: gpio@4004b000 {
	compatible = "fsl,vf610-gpio";
	reg = <0x4004b000 0x1000 0x400ff080 0x40>;
	gpio-controller;
	#gpio-cells = <2>;
	interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
	interrupt-controller;
	#interrupt-cells = <2>;
	gpio-ranges = <&iomuxc 0 64 32>;
	};

	gpio3: gpio@4004c000 {
	compatible = "fsl,vf610-gpio";
	reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
	gpio-controller;
	#gpio-cells = <2>;
	interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
	interrupt-controller;
	#interrupt-cells = <2>;
	gpio-ranges = <&iomuxc 0 96 32>;
	};

	gpio4: gpio@4004d000 {
	compatible = "fsl,vf610-gpio";
	reg = <0x4004d000 0x1000 0x400ff100 0x40>;
	gpio-controller;
	#gpio-cells = <2>;
	interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
	interrupt-controller;
	#interrupt-cells = <2>;
	gpio-ranges = <&iomuxc 0 128 7>;
	};

	anatop: anatop@40050000 {
	compatible = "fsl,vf610-anatop", "syscon";
	reg = <0x40050000 0x400>;
	};

	usbphy0: usbphy@40050800 {
	compatible = "fsl,vf610-usbphy";
	reg = <0x40050800 0x400>;
	interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_USBPHY0>;
	fsl,anatop = <&anatop>;
	status = "disabled";
	};

	usbphy1: usbphy@40050c00 {
	compatible = "fsl,vf610-usbphy";
	reg = <0x40050c00 0x400>;
	interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_USBPHY1>;
	fsl,anatop = <&anatop>;
	status = "disabled";
	};

	i2c0: i2c@40066000 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "fsl,vf610-i2c";
	reg = <0x40066000 0x1000>;
	interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_I2C0>;
	clock-names = "ipg";
	dmas = <&edma0 0 50>,
	<&edma0 0 51>;
	dma-names = "rx","tx";
	status = "disabled";
	};

	i2c1: i2c@40067000 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "fsl,vf610-i2c";
	reg = <0x40067000 0x1000>;
	interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_I2C1>;
	clock-names = "ipg";
	dmas = <&edma0 0 52>,
	<&edma0 0 53>;
	dma-names = "rx","tx";
	status = "disabled";
	};

	clks: ccm@4006b000 {
	compatible = "fsl,vf610-ccm";
	reg = <0x4006b000 0x1000>;
	clocks = <&sxosc>, <&fxosc>;
	clock-names = "sxosc", "fxosc";
	#clock-cells = <1>;
	};

	usbdev0: usb@40034000 {
	compatible = "fsl,vf610-usb", "fsl,imx27-usb";
	reg = <0x40034000 0x800>;
	interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_USBC0>;
	fsl,usbphy = <&usbphy0>;
	fsl,usbmisc = <&usbmisc0 0>;
	dr_mode = "peripheral";
	status = "disabled";
	};

	usbmisc0: usb@40034800 {
	#index-cells = <1>;
	compatible = "fsl,vf610-usbmisc";
	reg = <0x40034800 0x200>;
	clocks = <&clks VF610_CLK_USBC0>;
	status = "disabled";
	};

	src: src@4006e000 {
	compatible = "fsl,vf610-src", "syscon";
	reg = <0x4006e000 0x1000>;
	interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
	};
	};

	aips1: aips-bus@40080000 {
	compatible = "fsl,aips-bus", "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges;

	edma1: dma-controller@40098000 {
	#dma-cells = <2>;
	compatible = "fsl,vf610-edma";
	reg = <0x40098000 0x2000>,
	<0x400a1000 0x1000>,
	<0x400a2000 0x1000>;
	dma-channels = <32>;
	interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
	<11 IRQ_TYPE_LEVEL_HIGH>;
	interrupt-names = "edma-tx", "edma-err";
	clock-names = "dmamux0", "dmamux1";
	clocks = <&clks VF610_CLK_DMAMUX2>,
	<&clks VF610_CLK_DMAMUX3>;
	status = "disabled";
	};

	snvs0: snvs@400a7000 {
	compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
	reg = <0x400a7000 0x2000>;

	snvsrtc: snvs-rtc-lp {
	compatible = "fsl,sec-v4.0-mon-rtc-lp";
	regmap = <&snvs0>;
	offset = <0x34>;
	interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_SNVS>;
	clock-names = "snvs-rtc";
	};
	};

	uart4: serial@400a9000 {
	compatible = "fsl,vf610-lpuart";
	reg = <0x400a9000 0x1000>;
	interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_UART4>;
	clock-names = "ipg";
	status = "disabled";
	};

	uart5: serial@400aa000 {
	compatible = "fsl,vf610-lpuart";
	reg = <0x400aa000 0x1000>;
	interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_UART5>;
	clock-names = "ipg";
	status = "disabled";
	};

	dspi2: dspi2@400ac000 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "fsl,vf610-dspi";
	reg = <0x400ac000 0x1000>;
	interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_DSPI2>;
	clock-names = "dspi";
	spi-num-chipselects = <2>;
	status = "disabled";
	};

	dspi3: dspi3@400ad000 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "fsl,vf610-dspi";
	reg = <0x400ad000 0x1000>;
	interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_DSPI3>;
	clock-names = "dspi";
	spi-num-chipselects = <2>;
	status = "disabled";
	};

	adc1: adc@400bb000 {
	compatible = "fsl,vf610-adc";
	reg = <0x400bb000 0x1000>;
	interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_ADC1>;
	clock-names = "adc";
	#io-channel-cells = <1>;
	status = "disabled";
	fsl,adck-max-frequency = <30000000>, <40000000>,
	<20000000>;
	};

	esdhc0: esdhc@400b1000 {
	compatible = "fsl,imx53-esdhc";
	reg = <0x400b1000 0x1000>;
	interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_IPG_BUS>,
	<&clks VF610_CLK_PLATFORM_BUS>,
	<&clks VF610_CLK_ESDHC0>;
	clock-names = "ipg", "ahb", "per";
	status = "disabled";
	};

	esdhc1: esdhc@400b2000 {
	compatible = "fsl,imx53-esdhc";
	reg = <0x400b2000 0x1000>;
	interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_IPG_BUS>,
	<&clks VF610_CLK_PLATFORM_BUS>,
	<&clks VF610_CLK_ESDHC1>;
	clock-names = "ipg", "ahb", "per";
	status = "disabled";
	};

	usbh1: usb@400b4000 {
	compatible = "fsl,vf610-usb", "fsl,imx27-usb";
	reg = <0x400b4000 0x800>;
	interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_USBC1>;
	fsl,usbphy = <&usbphy1>;
	fsl,usbmisc = <&usbmisc1 0>;
	dr_mode = "host";
	status = "disabled";
	};

	usbmisc1: usb@400b4800 {
	#index-cells = <1>;
	compatible = "fsl,vf610-usbmisc";
	reg = <0x400b4800 0x200>;
	clocks = <&clks VF610_CLK_USBC1>;
	status = "disabled";
	};

	ftm: ftm@400b8000 {
	compatible = "fsl,ftm-timer";
	reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
	interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
	clock-names = "ftm-evt", "ftm-src",
	"ftm-evt-counter-en", "ftm-src-counter-en";
	clocks = <&clks VF610_CLK_FTM2>,
	<&clks VF610_CLK_FTM3>,
	<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
	<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
	status = "disabled";
	};

	qspi1: quadspi@400c4000 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "fsl,vf610-qspi";
	reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
	reg-names = "QuadSPI", "QuadSPI-memory";
	interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_QSPI1_EN>,
	<&clks VF610_CLK_QSPI1>;
	clock-names = "qspi_en", "qspi";
	status = "disabled";
	};

	dac0: dac@400cc000 {
	compatible = "fsl,vf610-dac";
	reg = <0x400cc000 1000>;
	interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
	clock-names = "dac";
	clocks = <&clks VF610_CLK_DAC0>;
	status = "disabled";
	};

	dac1: dac@400cd000 {
	compatible = "fsl,vf610-dac";
	reg = <0x400cd000 1000>;
	interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
	clock-names = "dac";
	clocks = <&clks VF610_CLK_DAC1>;
	status = "disabled";
	};

	fec0: ethernet@400d0000 {
	compatible = "fsl,mvf600-fec";
	reg = <0x400d0000 0x1000>;
	interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_ENET0>,
	<&clks VF610_CLK_ENET0>,
	<&clks VF610_CLK_ENET>;
	clock-names = "ipg", "ahb", "ptp";
	status = "disabled";
	};

	fec1: ethernet@400d1000 {
	compatible = "fsl,mvf600-fec";
	reg = <0x400d1000 0x1000>;
	interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_ENET1>,
	<&clks VF610_CLK_ENET1>,
	<&clks VF610_CLK_ENET>;
	clock-names = "ipg", "ahb", "ptp";
	status = "disabled";
	};

	can1: flexcan@400d4000 {
	compatible = "fsl,vf610-flexcan";
	reg = <0x400d4000 0x4000>;
	interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_FLEXCAN1>,
	<&clks VF610_CLK_FLEXCAN1>;
	clock-names = "ipg", "per";
	status = "disabled";
	};

	nfc: nand@400e0000 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "fsl,vf610-nfc";
	reg = <0x400e0000 0x4000>;
	interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_NFC>;
	clock-names = "nfc";
	status = "disabled";
	};

	i2c2: i2c@400e6000 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "fsl,vf610-i2c";
	reg = <0x400e6000 0x1000>;
	interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_I2C2>;
	clock-names = "ipg";
	dmas = <&edma0 1 36>,
	<&edma0 1 37>;
	dma-names = "rx","tx";
	status = "disabled";
	};

	i2c3: i2c@400e7000 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "fsl,vf610-i2c";
	reg = <0x400e7000 0x1000>;
	interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks VF610_CLK_I2C3>;
	clock-names = "ipg";
	dmas = <&edma0 1 38>,
	<&edma0 1 39>;
	dma-names = "rx","tx";
	status = "disabled";
	};
	};

	iio-hwmon {
	compatible = "iio-hwmon";
	io-channels = <&adc0 16>, <&adc1 16>;
	};
	};
	};