| /* |
| * R-Car THS/TSC thermal sensor driver |
| * |
| * Copyright (C) 2012 Renesas Solutions Corp. |
| * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
| */ |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/thermal.h> |
| |
| #define THSCR 0x2c |
| #define THSSR 0x30 |
| |
| /* THSCR */ |
| #define CPTAP 0xf |
| |
| /* THSSR */ |
| #define CTEMP 0x3f |
| |
| |
| struct rcar_thermal_priv { |
| void __iomem *base; |
| struct device *dev; |
| spinlock_t lock; |
| u32 comp; |
| }; |
| |
| /* |
| * basic functions |
| */ |
| static u32 rcar_thermal_read(struct rcar_thermal_priv *priv, u32 reg) |
| { |
| unsigned long flags; |
| u32 ret; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| ret = ioread32(priv->base + reg); |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return ret; |
| } |
| |
| #if 0 /* no user at this point */ |
| static void rcar_thermal_write(struct rcar_thermal_priv *priv, |
| u32 reg, u32 data) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| iowrite32(data, priv->base + reg); |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| } |
| #endif |
| |
| static void rcar_thermal_bset(struct rcar_thermal_priv *priv, u32 reg, |
| u32 mask, u32 data) |
| { |
| unsigned long flags; |
| u32 val; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| val = ioread32(priv->base + reg); |
| val &= ~mask; |
| val |= (data & mask); |
| iowrite32(val, priv->base + reg); |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| } |
| |
| /* |
| * zone device functions |
| */ |
| static int rcar_thermal_get_temp(struct thermal_zone_device *zone, |
| unsigned long *temp) |
| { |
| struct rcar_thermal_priv *priv = zone->devdata; |
| int val, min, max, tmp; |
| |
| tmp = -200; /* default */ |
| while (1) { |
| if (priv->comp < 1 || priv->comp > 12) { |
| dev_err(priv->dev, |
| "THSSR invalid data (%d)\n", priv->comp); |
| priv->comp = 4; /* for next thermal */ |
| return -EINVAL; |
| } |
| |
| /* |
| * THS comparator offset and the reference temperature |
| * |
| * Comparator | reference | Temperature field |
| * offset | temperature | measurement |
| * | (degrees C) | (degrees C) |
| * -------------+---------------+------------------- |
| * 1 | -45 | -45 to -30 |
| * 2 | -30 | -30 to -15 |
| * 3 | -15 | -15 to 0 |
| * 4 | 0 | 0 to +15 |
| * 5 | +15 | +15 to +30 |
| * 6 | +30 | +30 to +45 |
| * 7 | +45 | +45 to +60 |
| * 8 | +60 | +60 to +75 |
| * 9 | +75 | +75 to +90 |
| * 10 | +90 | +90 to +105 |
| * 11 | +105 | +105 to +120 |
| * 12 | +120 | +120 to +135 |
| */ |
| |
| /* calculate thermal limitation */ |
| min = (priv->comp * 15) - 60; |
| max = min + 15; |
| |
| /* |
| * we need to wait 300us after changing comparator offset |
| * to get stable temperature. |
| * see "Usage Notes" on datasheet |
| */ |
| rcar_thermal_bset(priv, THSCR, CPTAP, priv->comp); |
| udelay(300); |
| |
| /* calculate current temperature */ |
| val = rcar_thermal_read(priv, THSSR) & CTEMP; |
| val = (val * 5) - 65; |
| |
| dev_dbg(priv->dev, "comp/min/max/val = %d/%d/%d/%d\n", |
| priv->comp, min, max, val); |
| |
| /* |
| * If val is same as min/max, then, |
| * it should try again on next comparator. |
| * But the val might be correct temperature. |
| * Keep it on "tmp" and compare with next val. |
| */ |
| if (tmp == val) |
| break; |
| |
| if (val <= min) { |
| tmp = min; |
| priv->comp--; /* try again */ |
| } else if (val >= max) { |
| tmp = max; |
| priv->comp++; /* try again */ |
| } else { |
| tmp = val; |
| break; |
| } |
| } |
| |
| *temp = tmp; |
| return 0; |
| } |
| |
| static struct thermal_zone_device_ops rcar_thermal_zone_ops = { |
| .get_temp = rcar_thermal_get_temp, |
| }; |
| |
| /* |
| * platform functions |
| */ |
| static int rcar_thermal_probe(struct platform_device *pdev) |
| { |
| struct thermal_zone_device *zone; |
| struct rcar_thermal_priv *priv; |
| struct resource *res; |
| int ret; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "Could not get platform resource\n"); |
| return -ENODEV; |
| } |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) { |
| dev_err(&pdev->dev, "Could not allocate priv\n"); |
| return -ENOMEM; |
| } |
| |
| priv->comp = 4; /* basic setup */ |
| priv->dev = &pdev->dev; |
| spin_lock_init(&priv->lock); |
| priv->base = devm_ioremap_nocache(&pdev->dev, |
| res->start, resource_size(res)); |
| if (!priv->base) { |
| dev_err(&pdev->dev, "Unable to ioremap thermal register\n"); |
| ret = -ENOMEM; |
| goto error_free_priv; |
| } |
| |
| zone = thermal_zone_device_register("rcar_thermal", 0, priv, |
| &rcar_thermal_zone_ops, 0, 0); |
| if (IS_ERR(zone)) { |
| dev_err(&pdev->dev, "thermal zone device is NULL\n"); |
| ret = PTR_ERR(zone); |
| goto error_iounmap; |
| } |
| |
| platform_set_drvdata(pdev, zone); |
| |
| dev_info(&pdev->dev, "proved\n"); |
| |
| return 0; |
| |
| error_iounmap: |
| devm_iounmap(&pdev->dev, priv->base); |
| error_free_priv: |
| devm_kfree(&pdev->dev, priv); |
| |
| return ret; |
| } |
| |
| static int rcar_thermal_remove(struct platform_device *pdev) |
| { |
| struct thermal_zone_device *zone = platform_get_drvdata(pdev); |
| struct rcar_thermal_priv *priv = zone->devdata; |
| |
| thermal_zone_device_unregister(zone); |
| platform_set_drvdata(pdev, NULL); |
| |
| devm_iounmap(&pdev->dev, priv->base); |
| devm_kfree(&pdev->dev, priv); |
| |
| return 0; |
| } |
| |
| static struct platform_driver rcar_thermal_driver = { |
| .driver = { |
| .name = "rcar_thermal", |
| }, |
| .probe = rcar_thermal_probe, |
| .remove = rcar_thermal_remove, |
| }; |
| module_platform_driver(rcar_thermal_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("R-Car THS/TSC thermal sensor driver"); |
| MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); |