| /* |
| * Auvitek AU0828 USB Bridge (Analog video support) |
| * |
| * Copyright (C) 2009 Devin Heitmueller <dheitmueller@linuxtv.org> |
| * Copyright (C) 2005-2008 Auvitek International, Ltd. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * As published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA. |
| */ |
| |
| /* Developer Notes: |
| * |
| * VBI support is not yet working |
| * The hardware scaler supported is unimplemented |
| * AC97 audio support is unimplemented (only i2s audio mode) |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/suspend.h> |
| #include <linux/version.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/v4l2-chip-ident.h> |
| #include <media/tuner.h> |
| #include "au0828.h" |
| #include "au0828-reg.h" |
| |
| static DEFINE_MUTEX(au0828_sysfs_lock); |
| |
| #define AU0828_VERSION_CODE KERNEL_VERSION(0, 0, 1) |
| |
| /* ------------------------------------------------------------------ |
| Videobuf operations |
| ------------------------------------------------------------------*/ |
| |
| static unsigned int isoc_debug; |
| module_param(isoc_debug, int, 0644); |
| MODULE_PARM_DESC(isoc_debug, "enable debug messages [isoc transfers]"); |
| |
| #define au0828_isocdbg(fmt, arg...) \ |
| do {\ |
| if (isoc_debug) { \ |
| printk(KERN_INFO "au0828 %s :"fmt, \ |
| __func__ , ##arg); \ |
| } \ |
| } while (0) |
| |
| static inline void print_err_status(struct au0828_dev *dev, |
| int packet, int status) |
| { |
| char *errmsg = "Unknown"; |
| |
| switch (status) { |
| case -ENOENT: |
| errmsg = "unlinked synchronuously"; |
| break; |
| case -ECONNRESET: |
| errmsg = "unlinked asynchronuously"; |
| break; |
| case -ENOSR: |
| errmsg = "Buffer error (overrun)"; |
| break; |
| case -EPIPE: |
| errmsg = "Stalled (device not responding)"; |
| break; |
| case -EOVERFLOW: |
| errmsg = "Babble (bad cable?)"; |
| break; |
| case -EPROTO: |
| errmsg = "Bit-stuff error (bad cable?)"; |
| break; |
| case -EILSEQ: |
| errmsg = "CRC/Timeout (could be anything)"; |
| break; |
| case -ETIME: |
| errmsg = "Device does not respond"; |
| break; |
| } |
| if (packet < 0) { |
| au0828_isocdbg("URB status %d [%s].\n", status, errmsg); |
| } else { |
| au0828_isocdbg("URB packet %d, status %d [%s].\n", |
| packet, status, errmsg); |
| } |
| } |
| |
| static int check_dev(struct au0828_dev *dev) |
| { |
| if (dev->dev_state & DEV_DISCONNECTED) { |
| printk(KERN_INFO "v4l2 ioctl: device not present\n"); |
| return -ENODEV; |
| } |
| |
| if (dev->dev_state & DEV_MISCONFIGURED) { |
| printk(KERN_INFO "v4l2 ioctl: device is misconfigured; " |
| "close and open it again\n"); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| /* |
| * IRQ callback, called by URB callback |
| */ |
| static void au0828_irq_callback(struct urb *urb) |
| { |
| struct au0828_dmaqueue *dma_q = urb->context; |
| struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq); |
| unsigned long flags = 0; |
| int rc, i; |
| |
| switch (urb->status) { |
| case 0: /* success */ |
| case -ETIMEDOUT: /* NAK */ |
| break; |
| case -ECONNRESET: /* kill */ |
| case -ENOENT: |
| case -ESHUTDOWN: |
| au0828_isocdbg("au0828_irq_callback called: status kill\n"); |
| return; |
| default: /* unknown error */ |
| au0828_isocdbg("urb completition error %d.\n", urb->status); |
| break; |
| } |
| |
| /* Copy data from URB */ |
| spin_lock_irqsave(&dev->slock, flags); |
| rc = dev->isoc_ctl.isoc_copy(dev, urb); |
| spin_unlock_irqrestore(&dev->slock, flags); |
| |
| /* Reset urb buffers */ |
| for (i = 0; i < urb->number_of_packets; i++) { |
| urb->iso_frame_desc[i].status = 0; |
| urb->iso_frame_desc[i].actual_length = 0; |
| } |
| urb->status = 0; |
| |
| urb->status = usb_submit_urb(urb, GFP_ATOMIC); |
| if (urb->status) { |
| au0828_isocdbg("urb resubmit failed (error=%i)\n", |
| urb->status); |
| } |
| } |
| |
| /* |
| * Stop and Deallocate URBs |
| */ |
| void au0828_uninit_isoc(struct au0828_dev *dev) |
| { |
| struct urb *urb; |
| int i; |
| |
| au0828_isocdbg("au0828: called au0828_uninit_isoc\n"); |
| |
| dev->isoc_ctl.nfields = -1; |
| for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { |
| urb = dev->isoc_ctl.urb[i]; |
| if (urb) { |
| if (!irqs_disabled()) |
| usb_kill_urb(urb); |
| else |
| usb_unlink_urb(urb); |
| |
| if (dev->isoc_ctl.transfer_buffer[i]) { |
| usb_free_coherent(dev->usbdev, |
| urb->transfer_buffer_length, |
| dev->isoc_ctl.transfer_buffer[i], |
| urb->transfer_dma); |
| } |
| usb_free_urb(urb); |
| dev->isoc_ctl.urb[i] = NULL; |
| } |
| dev->isoc_ctl.transfer_buffer[i] = NULL; |
| } |
| |
| kfree(dev->isoc_ctl.urb); |
| kfree(dev->isoc_ctl.transfer_buffer); |
| |
| dev->isoc_ctl.urb = NULL; |
| dev->isoc_ctl.transfer_buffer = NULL; |
| dev->isoc_ctl.num_bufs = 0; |
| } |
| |
| /* |
| * Allocate URBs and start IRQ |
| */ |
| int au0828_init_isoc(struct au0828_dev *dev, int max_packets, |
| int num_bufs, int max_pkt_size, |
| int (*isoc_copy) (struct au0828_dev *dev, struct urb *urb)) |
| { |
| struct au0828_dmaqueue *dma_q = &dev->vidq; |
| int i; |
| int sb_size, pipe; |
| struct urb *urb; |
| int j, k; |
| int rc; |
| |
| au0828_isocdbg("au0828: called au0828_prepare_isoc\n"); |
| |
| /* De-allocates all pending stuff */ |
| au0828_uninit_isoc(dev); |
| |
| dev->isoc_ctl.isoc_copy = isoc_copy; |
| dev->isoc_ctl.num_bufs = num_bufs; |
| |
| dev->isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL); |
| if (!dev->isoc_ctl.urb) { |
| au0828_isocdbg("cannot alloc memory for usb buffers\n"); |
| return -ENOMEM; |
| } |
| |
| dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs, |
| GFP_KERNEL); |
| if (!dev->isoc_ctl.transfer_buffer) { |
| au0828_isocdbg("cannot allocate memory for usb transfer\n"); |
| kfree(dev->isoc_ctl.urb); |
| return -ENOMEM; |
| } |
| |
| dev->isoc_ctl.max_pkt_size = max_pkt_size; |
| dev->isoc_ctl.buf = NULL; |
| |
| sb_size = max_packets * dev->isoc_ctl.max_pkt_size; |
| |
| /* allocate urbs and transfer buffers */ |
| for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { |
| urb = usb_alloc_urb(max_packets, GFP_KERNEL); |
| if (!urb) { |
| au0828_isocdbg("cannot alloc isoc_ctl.urb %i\n", i); |
| au0828_uninit_isoc(dev); |
| return -ENOMEM; |
| } |
| dev->isoc_ctl.urb[i] = urb; |
| |
| dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->usbdev, |
| sb_size, GFP_KERNEL, &urb->transfer_dma); |
| if (!dev->isoc_ctl.transfer_buffer[i]) { |
| printk("unable to allocate %i bytes for transfer" |
| " buffer %i%s\n", |
| sb_size, i, |
| in_interrupt() ? " while in int" : ""); |
| au0828_uninit_isoc(dev); |
| return -ENOMEM; |
| } |
| memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size); |
| |
| pipe = usb_rcvisocpipe(dev->usbdev, |
| dev->isoc_in_endpointaddr), |
| |
| usb_fill_int_urb(urb, dev->usbdev, pipe, |
| dev->isoc_ctl.transfer_buffer[i], sb_size, |
| au0828_irq_callback, dma_q, 1); |
| |
| urb->number_of_packets = max_packets; |
| urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; |
| |
| k = 0; |
| for (j = 0; j < max_packets; j++) { |
| urb->iso_frame_desc[j].offset = k; |
| urb->iso_frame_desc[j].length = |
| dev->isoc_ctl.max_pkt_size; |
| k += dev->isoc_ctl.max_pkt_size; |
| } |
| } |
| |
| init_waitqueue_head(&dma_q->wq); |
| |
| /* submit urbs and enables IRQ */ |
| for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { |
| rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); |
| if (rc) { |
| au0828_isocdbg("submit of urb %i failed (error=%i)\n", |
| i, rc); |
| au0828_uninit_isoc(dev); |
| return rc; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Announces that a buffer were filled and request the next |
| */ |
| static inline void buffer_filled(struct au0828_dev *dev, |
| struct au0828_dmaqueue *dma_q, |
| struct au0828_buffer *buf) |
| { |
| /* Advice that buffer was filled */ |
| au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->vb.i); |
| |
| buf->vb.state = VIDEOBUF_DONE; |
| buf->vb.field_count++; |
| do_gettimeofday(&buf->vb.ts); |
| |
| dev->isoc_ctl.buf = NULL; |
| |
| list_del(&buf->vb.queue); |
| wake_up(&buf->vb.done); |
| } |
| |
| static inline void vbi_buffer_filled(struct au0828_dev *dev, |
| struct au0828_dmaqueue *dma_q, |
| struct au0828_buffer *buf) |
| { |
| /* Advice that buffer was filled */ |
| au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->vb.i); |
| |
| buf->vb.state = VIDEOBUF_DONE; |
| buf->vb.field_count++; |
| do_gettimeofday(&buf->vb.ts); |
| |
| dev->isoc_ctl.vbi_buf = NULL; |
| |
| list_del(&buf->vb.queue); |
| wake_up(&buf->vb.done); |
| } |
| |
| /* |
| * Identify the buffer header type and properly handles |
| */ |
| static void au0828_copy_video(struct au0828_dev *dev, |
| struct au0828_dmaqueue *dma_q, |
| struct au0828_buffer *buf, |
| unsigned char *p, |
| unsigned char *outp, unsigned long len) |
| { |
| void *fieldstart, *startwrite, *startread; |
| int linesdone, currlinedone, offset, lencopy, remain; |
| int bytesperline = dev->width << 1; /* Assumes 16-bit depth @@@@ */ |
| |
| if (len == 0) |
| return; |
| |
| if (dma_q->pos + len > buf->vb.size) |
| len = buf->vb.size - dma_q->pos; |
| |
| startread = p; |
| remain = len; |
| |
| /* Interlaces frame */ |
| if (buf->top_field) |
| fieldstart = outp; |
| else |
| fieldstart = outp + bytesperline; |
| |
| linesdone = dma_q->pos / bytesperline; |
| currlinedone = dma_q->pos % bytesperline; |
| offset = linesdone * bytesperline * 2 + currlinedone; |
| startwrite = fieldstart + offset; |
| lencopy = bytesperline - currlinedone; |
| lencopy = lencopy > remain ? remain : lencopy; |
| |
| if ((char *)startwrite + lencopy > (char *)outp + buf->vb.size) { |
| au0828_isocdbg("Overflow of %zi bytes past buffer end (1)\n", |
| ((char *)startwrite + lencopy) - |
| ((char *)outp + buf->vb.size)); |
| remain = (char *)outp + buf->vb.size - (char *)startwrite; |
| lencopy = remain; |
| } |
| if (lencopy <= 0) |
| return; |
| memcpy(startwrite, startread, lencopy); |
| |
| remain -= lencopy; |
| |
| while (remain > 0) { |
| startwrite += lencopy + bytesperline; |
| startread += lencopy; |
| if (bytesperline > remain) |
| lencopy = remain; |
| else |
| lencopy = bytesperline; |
| |
| if ((char *)startwrite + lencopy > (char *)outp + |
| buf->vb.size) { |
| au0828_isocdbg("Overflow %zi bytes past buf end (2)\n", |
| ((char *)startwrite + lencopy) - |
| ((char *)outp + buf->vb.size)); |
| lencopy = remain = (char *)outp + buf->vb.size - |
| (char *)startwrite; |
| } |
| if (lencopy <= 0) |
| break; |
| |
| memcpy(startwrite, startread, lencopy); |
| |
| remain -= lencopy; |
| } |
| |
| if (offset > 1440) { |
| /* We have enough data to check for greenscreen */ |
| if (outp[0] < 0x60 && outp[1440] < 0x60) |
| dev->greenscreen_detected = 1; |
| } |
| |
| dma_q->pos += len; |
| } |
| |
| /* |
| * video-buf generic routine to get the next available buffer |
| */ |
| static inline void get_next_buf(struct au0828_dmaqueue *dma_q, |
| struct au0828_buffer **buf) |
| { |
| struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq); |
| |
| if (list_empty(&dma_q->active)) { |
| au0828_isocdbg("No active queue to serve\n"); |
| dev->isoc_ctl.buf = NULL; |
| *buf = NULL; |
| return; |
| } |
| |
| /* Get the next buffer */ |
| *buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue); |
| dev->isoc_ctl.buf = *buf; |
| |
| return; |
| } |
| |
| static void au0828_copy_vbi(struct au0828_dev *dev, |
| struct au0828_dmaqueue *dma_q, |
| struct au0828_buffer *buf, |
| unsigned char *p, |
| unsigned char *outp, unsigned long len) |
| { |
| unsigned char *startwrite, *startread; |
| int bytesperline; |
| int i, j = 0; |
| |
| if (dev == NULL) { |
| au0828_isocdbg("dev is null\n"); |
| return; |
| } |
| |
| if (dma_q == NULL) { |
| au0828_isocdbg("dma_q is null\n"); |
| return; |
| } |
| if (buf == NULL) |
| return; |
| if (p == NULL) { |
| au0828_isocdbg("p is null\n"); |
| return; |
| } |
| if (outp == NULL) { |
| au0828_isocdbg("outp is null\n"); |
| return; |
| } |
| |
| bytesperline = dev->vbi_width; |
| |
| if (dma_q->pos + len > buf->vb.size) |
| len = buf->vb.size - dma_q->pos; |
| |
| startread = p; |
| startwrite = outp + (dma_q->pos / 2); |
| |
| /* Make sure the bottom field populates the second half of the frame */ |
| if (buf->top_field == 0) |
| startwrite += bytesperline * dev->vbi_height; |
| |
| for (i = 0; i < len; i += 2) |
| startwrite[j++] = startread[i+1]; |
| |
| dma_q->pos += len; |
| } |
| |
| |
| /* |
| * video-buf generic routine to get the next available VBI buffer |
| */ |
| static inline void vbi_get_next_buf(struct au0828_dmaqueue *dma_q, |
| struct au0828_buffer **buf) |
| { |
| struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vbiq); |
| char *outp; |
| |
| if (list_empty(&dma_q->active)) { |
| au0828_isocdbg("No active queue to serve\n"); |
| dev->isoc_ctl.vbi_buf = NULL; |
| *buf = NULL; |
| return; |
| } |
| |
| /* Get the next buffer */ |
| *buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue); |
| /* Cleans up buffer - Usefull for testing for frame/URB loss */ |
| outp = videobuf_to_vmalloc(&(*buf)->vb); |
| memset(outp, 0x00, (*buf)->vb.size); |
| |
| dev->isoc_ctl.vbi_buf = *buf; |
| |
| return; |
| } |
| |
| /* |
| * Controls the isoc copy of each urb packet |
| */ |
| static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb) |
| { |
| struct au0828_buffer *buf; |
| struct au0828_buffer *vbi_buf; |
| struct au0828_dmaqueue *dma_q = urb->context; |
| struct au0828_dmaqueue *vbi_dma_q = &dev->vbiq; |
| unsigned char *outp = NULL; |
| unsigned char *vbioutp = NULL; |
| int i, len = 0, rc = 1; |
| unsigned char *p; |
| unsigned char fbyte; |
| unsigned int vbi_field_size; |
| unsigned int remain, lencopy; |
| |
| if (!dev) |
| return 0; |
| |
| if ((dev->dev_state & DEV_DISCONNECTED) || |
| (dev->dev_state & DEV_MISCONFIGURED)) |
| return 0; |
| |
| if (urb->status < 0) { |
| print_err_status(dev, -1, urb->status); |
| if (urb->status == -ENOENT) |
| return 0; |
| } |
| |
| buf = dev->isoc_ctl.buf; |
| if (buf != NULL) |
| outp = videobuf_to_vmalloc(&buf->vb); |
| |
| vbi_buf = dev->isoc_ctl.vbi_buf; |
| if (vbi_buf != NULL) |
| vbioutp = videobuf_to_vmalloc(&vbi_buf->vb); |
| |
| for (i = 0; i < urb->number_of_packets; i++) { |
| int status = urb->iso_frame_desc[i].status; |
| |
| if (status < 0) { |
| print_err_status(dev, i, status); |
| if (urb->iso_frame_desc[i].status != -EPROTO) |
| continue; |
| } |
| |
| if (urb->iso_frame_desc[i].actual_length <= 0) |
| continue; |
| |
| if (urb->iso_frame_desc[i].actual_length > |
| dev->max_pkt_size) { |
| au0828_isocdbg("packet bigger than packet size"); |
| continue; |
| } |
| |
| p = urb->transfer_buffer + urb->iso_frame_desc[i].offset; |
| fbyte = p[0]; |
| len = urb->iso_frame_desc[i].actual_length - 4; |
| p += 4; |
| |
| if (fbyte & 0x80) { |
| len -= 4; |
| p += 4; |
| au0828_isocdbg("Video frame %s\n", |
| (fbyte & 0x40) ? "odd" : "even"); |
| if (fbyte & 0x40) { |
| /* VBI */ |
| if (vbi_buf != NULL) |
| vbi_buffer_filled(dev, |
| vbi_dma_q, |
| vbi_buf); |
| vbi_get_next_buf(vbi_dma_q, &vbi_buf); |
| if (vbi_buf == NULL) |
| vbioutp = NULL; |
| else |
| vbioutp = videobuf_to_vmalloc( |
| &vbi_buf->vb); |
| |
| /* Video */ |
| if (buf != NULL) |
| buffer_filled(dev, dma_q, buf); |
| get_next_buf(dma_q, &buf); |
| if (buf == NULL) |
| outp = NULL; |
| else |
| outp = videobuf_to_vmalloc(&buf->vb); |
| |
| /* As long as isoc traffic is arriving, keep |
| resetting the timer */ |
| if (dev->vid_timeout_running) |
| mod_timer(&dev->vid_timeout, |
| jiffies + (HZ / 10)); |
| if (dev->vbi_timeout_running) |
| mod_timer(&dev->vbi_timeout, |
| jiffies + (HZ / 10)); |
| } |
| |
| if (buf != NULL) { |
| if (fbyte & 0x40) |
| buf->top_field = 1; |
| else |
| buf->top_field = 0; |
| } |
| |
| if (vbi_buf != NULL) { |
| if (fbyte & 0x40) |
| vbi_buf->top_field = 1; |
| else |
| vbi_buf->top_field = 0; |
| } |
| |
| dev->vbi_read = 0; |
| vbi_dma_q->pos = 0; |
| dma_q->pos = 0; |
| } |
| |
| vbi_field_size = dev->vbi_width * dev->vbi_height * 2; |
| if (dev->vbi_read < vbi_field_size) { |
| remain = vbi_field_size - dev->vbi_read; |
| if (len < remain) |
| lencopy = len; |
| else |
| lencopy = remain; |
| |
| if (vbi_buf != NULL) |
| au0828_copy_vbi(dev, vbi_dma_q, vbi_buf, p, |
| vbioutp, len); |
| |
| len -= lencopy; |
| p += lencopy; |
| dev->vbi_read += lencopy; |
| } |
| |
| if (dev->vbi_read >= vbi_field_size && buf != NULL) |
| au0828_copy_video(dev, dma_q, buf, p, outp, len); |
| } |
| return rc; |
| } |
| |
| static int |
| buffer_setup(struct videobuf_queue *vq, unsigned int *count, |
| unsigned int *size) |
| { |
| struct au0828_fh *fh = vq->priv_data; |
| *size = (fh->dev->width * fh->dev->height * 16 + 7) >> 3; |
| |
| if (0 == *count) |
| *count = AU0828_DEF_BUF; |
| |
| if (*count < AU0828_MIN_BUF) |
| *count = AU0828_MIN_BUF; |
| return 0; |
| } |
| |
| /* This is called *without* dev->slock held; please keep it that way */ |
| static void free_buffer(struct videobuf_queue *vq, struct au0828_buffer *buf) |
| { |
| struct au0828_fh *fh = vq->priv_data; |
| struct au0828_dev *dev = fh->dev; |
| unsigned long flags = 0; |
| if (in_interrupt()) |
| BUG(); |
| |
| /* We used to wait for the buffer to finish here, but this didn't work |
| because, as we were keeping the state as VIDEOBUF_QUEUED, |
| videobuf_queue_cancel marked it as finished for us. |
| (Also, it could wedge forever if the hardware was misconfigured.) |
| |
| This should be safe; by the time we get here, the buffer isn't |
| queued anymore. If we ever start marking the buffers as |
| VIDEOBUF_ACTIVE, it won't be, though. |
| */ |
| spin_lock_irqsave(&dev->slock, flags); |
| if (dev->isoc_ctl.buf == buf) |
| dev->isoc_ctl.buf = NULL; |
| spin_unlock_irqrestore(&dev->slock, flags); |
| |
| videobuf_vmalloc_free(&buf->vb); |
| buf->vb.state = VIDEOBUF_NEEDS_INIT; |
| } |
| |
| static int |
| buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, |
| enum v4l2_field field) |
| { |
| struct au0828_fh *fh = vq->priv_data; |
| struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb); |
| struct au0828_dev *dev = fh->dev; |
| int rc = 0, urb_init = 0; |
| |
| buf->vb.size = (fh->dev->width * fh->dev->height * 16 + 7) >> 3; |
| |
| if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) |
| return -EINVAL; |
| |
| buf->vb.width = dev->width; |
| buf->vb.height = dev->height; |
| buf->vb.field = field; |
| |
| if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { |
| rc = videobuf_iolock(vq, &buf->vb, NULL); |
| if (rc < 0) { |
| printk(KERN_INFO "videobuf_iolock failed\n"); |
| goto fail; |
| } |
| } |
| |
| if (!dev->isoc_ctl.num_bufs) |
| urb_init = 1; |
| |
| if (urb_init) { |
| rc = au0828_init_isoc(dev, AU0828_ISO_PACKETS_PER_URB, |
| AU0828_MAX_ISO_BUFS, dev->max_pkt_size, |
| au0828_isoc_copy); |
| if (rc < 0) { |
| printk(KERN_INFO "au0828_init_isoc failed\n"); |
| goto fail; |
| } |
| } |
| |
| buf->vb.state = VIDEOBUF_PREPARED; |
| return 0; |
| |
| fail: |
| free_buffer(vq, buf); |
| return rc; |
| } |
| |
| static void |
| buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) |
| { |
| struct au0828_buffer *buf = container_of(vb, |
| struct au0828_buffer, |
| vb); |
| struct au0828_fh *fh = vq->priv_data; |
| struct au0828_dev *dev = fh->dev; |
| struct au0828_dmaqueue *vidq = &dev->vidq; |
| |
| buf->vb.state = VIDEOBUF_QUEUED; |
| list_add_tail(&buf->vb.queue, &vidq->active); |
| } |
| |
| static void buffer_release(struct videobuf_queue *vq, |
| struct videobuf_buffer *vb) |
| { |
| struct au0828_buffer *buf = container_of(vb, |
| struct au0828_buffer, |
| vb); |
| |
| free_buffer(vq, buf); |
| } |
| |
| static struct videobuf_queue_ops au0828_video_qops = { |
| .buf_setup = buffer_setup, |
| .buf_prepare = buffer_prepare, |
| .buf_queue = buffer_queue, |
| .buf_release = buffer_release, |
| }; |
| |
| /* ------------------------------------------------------------------ |
| V4L2 interface |
| ------------------------------------------------------------------*/ |
| |
| static int au0828_i2s_init(struct au0828_dev *dev) |
| { |
| /* Enable i2s mode */ |
| au0828_writereg(dev, AU0828_AUDIOCTRL_50C, 0x01); |
| return 0; |
| } |
| |
| /* |
| * Auvitek au0828 analog stream enable |
| * Please set interface0 to AS5 before enable the stream |
| */ |
| int au0828_analog_stream_enable(struct au0828_dev *d) |
| { |
| dprintk(1, "au0828_analog_stream_enable called\n"); |
| au0828_writereg(d, AU0828_SENSORCTRL_VBI_103, 0x00); |
| au0828_writereg(d, 0x106, 0x00); |
| /* set x position */ |
| au0828_writereg(d, 0x110, 0x00); |
| au0828_writereg(d, 0x111, 0x00); |
| au0828_writereg(d, 0x114, 0xa0); |
| au0828_writereg(d, 0x115, 0x05); |
| /* set y position */ |
| au0828_writereg(d, 0x112, 0x00); |
| au0828_writereg(d, 0x113, 0x00); |
| au0828_writereg(d, 0x116, 0xf2); |
| au0828_writereg(d, 0x117, 0x00); |
| au0828_writereg(d, AU0828_SENSORCTRL_100, 0xb3); |
| |
| return 0; |
| } |
| |
| int au0828_analog_stream_disable(struct au0828_dev *d) |
| { |
| dprintk(1, "au0828_analog_stream_disable called\n"); |
| au0828_writereg(d, AU0828_SENSORCTRL_100, 0x0); |
| return 0; |
| } |
| |
| void au0828_analog_stream_reset(struct au0828_dev *dev) |
| { |
| dprintk(1, "au0828_analog_stream_reset called\n"); |
| au0828_writereg(dev, AU0828_SENSORCTRL_100, 0x0); |
| mdelay(30); |
| au0828_writereg(dev, AU0828_SENSORCTRL_100, 0xb3); |
| } |
| |
| /* |
| * Some operations needs to stop current streaming |
| */ |
| static int au0828_stream_interrupt(struct au0828_dev *dev) |
| { |
| int ret = 0; |
| |
| dev->stream_state = STREAM_INTERRUPT; |
| if (dev->dev_state == DEV_DISCONNECTED) |
| return -ENODEV; |
| else if (ret) { |
| dev->dev_state = DEV_MISCONFIGURED; |
| dprintk(1, "%s device is misconfigured!\n", __func__); |
| return ret; |
| } |
| return 0; |
| } |
| |
| /* |
| * au0828_release_resources |
| * unregister v4l2 devices |
| */ |
| void au0828_analog_unregister(struct au0828_dev *dev) |
| { |
| dprintk(1, "au0828_release_resources called\n"); |
| mutex_lock(&au0828_sysfs_lock); |
| |
| if (dev->vdev) |
| video_unregister_device(dev->vdev); |
| if (dev->vbi_dev) |
| video_unregister_device(dev->vbi_dev); |
| |
| mutex_unlock(&au0828_sysfs_lock); |
| } |
| |
| |
| /* Usage lock check functions */ |
| static int res_get(struct au0828_fh *fh, unsigned int bit) |
| { |
| struct au0828_dev *dev = fh->dev; |
| |
| if (fh->resources & bit) |
| /* have it already allocated */ |
| return 1; |
| |
| /* is it free? */ |
| mutex_lock(&dev->lock); |
| if (dev->resources & bit) { |
| /* no, someone else uses it */ |
| mutex_unlock(&dev->lock); |
| return 0; |
| } |
| /* it's free, grab it */ |
| fh->resources |= bit; |
| dev->resources |= bit; |
| dprintk(1, "res: get %d\n", bit); |
| mutex_unlock(&dev->lock); |
| return 1; |
| } |
| |
| static int res_check(struct au0828_fh *fh, unsigned int bit) |
| { |
| return fh->resources & bit; |
| } |
| |
| static int res_locked(struct au0828_dev *dev, unsigned int bit) |
| { |
| return dev->resources & bit; |
| } |
| |
| static void res_free(struct au0828_fh *fh, unsigned int bits) |
| { |
| struct au0828_dev *dev = fh->dev; |
| |
| BUG_ON((fh->resources & bits) != bits); |
| |
| mutex_lock(&dev->lock); |
| fh->resources &= ~bits; |
| dev->resources &= ~bits; |
| dprintk(1, "res: put %d\n", bits); |
| mutex_unlock(&dev->lock); |
| } |
| |
| static int get_ressource(struct au0828_fh *fh) |
| { |
| switch (fh->type) { |
| case V4L2_BUF_TYPE_VIDEO_CAPTURE: |
| return AU0828_RESOURCE_VIDEO; |
| case V4L2_BUF_TYPE_VBI_CAPTURE: |
| return AU0828_RESOURCE_VBI; |
| default: |
| BUG(); |
| return 0; |
| } |
| } |
| |
| /* This function ensures that video frames continue to be delivered even if |
| the ITU-656 input isn't receiving any data (thereby preventing applications |
| such as tvtime from hanging) */ |
| void au0828_vid_buffer_timeout(unsigned long data) |
| { |
| struct au0828_dev *dev = (struct au0828_dev *) data; |
| struct au0828_dmaqueue *dma_q = &dev->vidq; |
| struct au0828_buffer *buf; |
| unsigned char *vid_data; |
| unsigned long flags = 0; |
| |
| spin_lock_irqsave(&dev->slock, flags); |
| |
| buf = dev->isoc_ctl.buf; |
| if (buf != NULL) { |
| vid_data = videobuf_to_vmalloc(&buf->vb); |
| memset(vid_data, 0x00, buf->vb.size); /* Blank green frame */ |
| buffer_filled(dev, dma_q, buf); |
| } |
| get_next_buf(dma_q, &buf); |
| |
| if (dev->vid_timeout_running == 1) |
| mod_timer(&dev->vid_timeout, jiffies + (HZ / 10)); |
| |
| spin_unlock_irqrestore(&dev->slock, flags); |
| } |
| |
| void au0828_vbi_buffer_timeout(unsigned long data) |
| { |
| struct au0828_dev *dev = (struct au0828_dev *) data; |
| struct au0828_dmaqueue *dma_q = &dev->vbiq; |
| struct au0828_buffer *buf; |
| unsigned char *vbi_data; |
| unsigned long flags = 0; |
| |
| spin_lock_irqsave(&dev->slock, flags); |
| |
| buf = dev->isoc_ctl.vbi_buf; |
| if (buf != NULL) { |
| vbi_data = videobuf_to_vmalloc(&buf->vb); |
| memset(vbi_data, 0x00, buf->vb.size); |
| vbi_buffer_filled(dev, dma_q, buf); |
| } |
| vbi_get_next_buf(dma_q, &buf); |
| |
| if (dev->vbi_timeout_running == 1) |
| mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); |
| spin_unlock_irqrestore(&dev->slock, flags); |
| } |
| |
| |
| static int au0828_v4l2_open(struct file *filp) |
| { |
| int ret = 0; |
| struct video_device *vdev = video_devdata(filp); |
| struct au0828_dev *dev = video_drvdata(filp); |
| struct au0828_fh *fh; |
| int type; |
| |
| switch (vdev->vfl_type) { |
| case VFL_TYPE_GRABBER: |
| type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| break; |
| case VFL_TYPE_VBI: |
| type = V4L2_BUF_TYPE_VBI_CAPTURE; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| fh = kzalloc(sizeof(struct au0828_fh), GFP_KERNEL); |
| if (NULL == fh) { |
| dprintk(1, "Failed allocate au0828_fh struct!\n"); |
| return -ENOMEM; |
| } |
| |
| fh->type = type; |
| fh->dev = dev; |
| filp->private_data = fh; |
| |
| if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) { |
| /* set au0828 interface0 to AS5 here again */ |
| ret = usb_set_interface(dev->usbdev, 0, 5); |
| if (ret < 0) { |
| printk(KERN_INFO "Au0828 can't set alternate to 5!\n"); |
| return -EBUSY; |
| } |
| dev->width = NTSC_STD_W; |
| dev->height = NTSC_STD_H; |
| dev->frame_size = dev->width * dev->height * 2; |
| dev->field_size = dev->width * dev->height; |
| dev->bytesperline = dev->width * 2; |
| |
| au0828_analog_stream_enable(dev); |
| au0828_analog_stream_reset(dev); |
| |
| /* If we were doing ac97 instead of i2s, it would go here...*/ |
| au0828_i2s_init(dev); |
| |
| dev->stream_state = STREAM_OFF; |
| dev->dev_state |= DEV_INITIALIZED; |
| } |
| |
| dev->users++; |
| |
| videobuf_queue_vmalloc_init(&fh->vb_vidq, &au0828_video_qops, |
| NULL, &dev->slock, |
| V4L2_BUF_TYPE_VIDEO_CAPTURE, |
| V4L2_FIELD_INTERLACED, |
| sizeof(struct au0828_buffer), fh, NULL); |
| |
| /* VBI Setup */ |
| dev->vbi_width = 720; |
| dev->vbi_height = 1; |
| videobuf_queue_vmalloc_init(&fh->vb_vbiq, &au0828_vbi_qops, |
| NULL, &dev->slock, |
| V4L2_BUF_TYPE_VBI_CAPTURE, |
| V4L2_FIELD_SEQ_TB, |
| sizeof(struct au0828_buffer), fh, NULL); |
| |
| return ret; |
| } |
| |
| static int au0828_v4l2_close(struct file *filp) |
| { |
| int ret; |
| struct au0828_fh *fh = filp->private_data; |
| struct au0828_dev *dev = fh->dev; |
| |
| if (res_check(fh, AU0828_RESOURCE_VIDEO)) { |
| /* Cancel timeout thread in case they didn't call streamoff */ |
| dev->vid_timeout_running = 0; |
| del_timer_sync(&dev->vid_timeout); |
| |
| videobuf_stop(&fh->vb_vidq); |
| res_free(fh, AU0828_RESOURCE_VIDEO); |
| } |
| |
| if (res_check(fh, AU0828_RESOURCE_VBI)) { |
| /* Cancel timeout thread in case they didn't call streamoff */ |
| dev->vbi_timeout_running = 0; |
| del_timer_sync(&dev->vbi_timeout); |
| |
| videobuf_stop(&fh->vb_vbiq); |
| res_free(fh, AU0828_RESOURCE_VBI); |
| } |
| |
| if (dev->users == 1) { |
| if (dev->dev_state & DEV_DISCONNECTED) { |
| au0828_analog_unregister(dev); |
| kfree(dev); |
| return 0; |
| } |
| |
| au0828_analog_stream_disable(dev); |
| |
| au0828_uninit_isoc(dev); |
| |
| /* Save some power by putting tuner to sleep */ |
| v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0); |
| |
| /* When close the device, set the usb intf0 into alt0 to free |
| USB bandwidth */ |
| ret = usb_set_interface(dev->usbdev, 0, 0); |
| if (ret < 0) |
| printk(KERN_INFO "Au0828 can't set alternate to 0!\n"); |
| } |
| |
| videobuf_mmap_free(&fh->vb_vidq); |
| videobuf_mmap_free(&fh->vb_vbiq); |
| kfree(fh); |
| dev->users--; |
| wake_up_interruptible_nr(&dev->open, 1); |
| return 0; |
| } |
| |
| static ssize_t au0828_v4l2_read(struct file *filp, char __user *buf, |
| size_t count, loff_t *pos) |
| { |
| struct au0828_fh *fh = filp->private_data; |
| struct au0828_dev *dev = fh->dev; |
| int rc; |
| |
| rc = check_dev(dev); |
| if (rc < 0) |
| return rc; |
| |
| if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { |
| if (res_locked(dev, AU0828_RESOURCE_VIDEO)) |
| return -EBUSY; |
| |
| return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0, |
| filp->f_flags & O_NONBLOCK); |
| } |
| |
| if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { |
| if (!res_get(fh, AU0828_RESOURCE_VBI)) |
| return -EBUSY; |
| |
| if (dev->vbi_timeout_running == 0) { |
| /* Handle case where caller tries to read without |
| calling streamon first */ |
| dev->vbi_timeout_running = 1; |
| mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); |
| } |
| |
| return videobuf_read_stream(&fh->vb_vbiq, buf, count, pos, 0, |
| filp->f_flags & O_NONBLOCK); |
| } |
| |
| return 0; |
| } |
| |
| static unsigned int au0828_v4l2_poll(struct file *filp, poll_table *wait) |
| { |
| struct au0828_fh *fh = filp->private_data; |
| struct au0828_dev *dev = fh->dev; |
| int rc; |
| |
| rc = check_dev(dev); |
| if (rc < 0) |
| return rc; |
| |
| if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { |
| if (!res_get(fh, AU0828_RESOURCE_VIDEO)) |
| return POLLERR; |
| return videobuf_poll_stream(filp, &fh->vb_vidq, wait); |
| } else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { |
| if (!res_get(fh, AU0828_RESOURCE_VBI)) |
| return POLLERR; |
| return videobuf_poll_stream(filp, &fh->vb_vbiq, wait); |
| } else { |
| return POLLERR; |
| } |
| } |
| |
| static int au0828_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) |
| { |
| struct au0828_fh *fh = filp->private_data; |
| struct au0828_dev *dev = fh->dev; |
| int rc; |
| |
| rc = check_dev(dev); |
| if (rc < 0) |
| return rc; |
| |
| if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| rc = videobuf_mmap_mapper(&fh->vb_vidq, vma); |
| else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) |
| rc = videobuf_mmap_mapper(&fh->vb_vbiq, vma); |
| |
| return rc; |
| } |
| |
| static int au0828_set_format(struct au0828_dev *dev, unsigned int cmd, |
| struct v4l2_format *format) |
| { |
| int ret; |
| int width = format->fmt.pix.width; |
| int height = format->fmt.pix.height; |
| unsigned int maxwidth, maxheight; |
| |
| maxwidth = 720; |
| maxheight = 480; |
| |
| if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| |
| /* If they are demanding a format other than the one we support, |
| bail out (tvtime asks for UYVY and then retries with YUYV) */ |
| if (format->fmt.pix.pixelformat != V4L2_PIX_FMT_UYVY) |
| return -EINVAL; |
| |
| /* format->fmt.pix.width only support 720 and height 480 */ |
| if (width != 720) |
| width = 720; |
| if (height != 480) |
| height = 480; |
| |
| format->fmt.pix.width = width; |
| format->fmt.pix.height = height; |
| format->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY; |
| format->fmt.pix.bytesperline = width * 2; |
| format->fmt.pix.sizeimage = width * height * 2; |
| format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; |
| format->fmt.pix.field = V4L2_FIELD_INTERLACED; |
| |
| if (cmd == VIDIOC_TRY_FMT) |
| return 0; |
| |
| /* maybe set new image format, driver current only support 720*480 */ |
| dev->width = width; |
| dev->height = height; |
| dev->frame_size = width * height * 2; |
| dev->field_size = width * height; |
| dev->bytesperline = width * 2; |
| |
| if (dev->stream_state == STREAM_ON) { |
| dprintk(1, "VIDIOC_SET_FMT: interrupting stream!\n"); |
| ret = au0828_stream_interrupt(dev); |
| if (ret != 0) { |
| dprintk(1, "error interrupting video stream!\n"); |
| return ret; |
| } |
| } |
| |
| /* set au0828 interface0 to AS5 here again */ |
| ret = usb_set_interface(dev->usbdev, 0, 5); |
| if (ret < 0) { |
| printk(KERN_INFO "Au0828 can't set alt setting to 5!\n"); |
| return -EBUSY; |
| } |
| |
| au0828_analog_stream_enable(dev); |
| |
| return 0; |
| } |
| |
| |
| static int vidioc_queryctrl(struct file *file, void *priv, |
| struct v4l2_queryctrl *qc) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| v4l2_device_call_all(&dev->v4l2_dev, 0, core, queryctrl, qc); |
| if (qc->type) |
| return 0; |
| else |
| return -EINVAL; |
| } |
| |
| static int vidioc_querycap(struct file *file, void *priv, |
| struct v4l2_capability *cap) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| |
| strlcpy(cap->driver, "au0828", sizeof(cap->driver)); |
| strlcpy(cap->card, dev->board.name, sizeof(cap->card)); |
| strlcpy(cap->bus_info, dev->v4l2_dev.name, sizeof(cap->bus_info)); |
| |
| cap->version = AU0828_VERSION_CODE; |
| |
| /*set the device capabilities */ |
| cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | |
| V4L2_CAP_VBI_CAPTURE | |
| V4L2_CAP_AUDIO | |
| V4L2_CAP_READWRITE | |
| V4L2_CAP_STREAMING | |
| V4L2_CAP_TUNER; |
| return 0; |
| } |
| |
| static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| if (f->index) |
| return -EINVAL; |
| |
| f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| strcpy(f->description, "Packed YUV2"); |
| |
| f->flags = 0; |
| f->pixelformat = V4L2_PIX_FMT_UYVY; |
| |
| return 0; |
| } |
| |
| static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| |
| f->fmt.pix.width = dev->width; |
| f->fmt.pix.height = dev->height; |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY; |
| f->fmt.pix.bytesperline = dev->bytesperline; |
| f->fmt.pix.sizeimage = dev->frame_size; |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; /* NTSC/PAL */ |
| f->fmt.pix.field = V4L2_FIELD_INTERLACED; |
| return 0; |
| } |
| |
| static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| |
| return au0828_set_format(dev, VIDIOC_TRY_FMT, f); |
| } |
| |
| static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| int rc; |
| |
| rc = check_dev(dev); |
| if (rc < 0) |
| return rc; |
| |
| mutex_lock(&dev->lock); |
| |
| if (videobuf_queue_is_busy(&fh->vb_vidq)) { |
| printk(KERN_INFO "%s queue busy\n", __func__); |
| rc = -EBUSY; |
| goto out; |
| } |
| |
| rc = au0828_set_format(dev, VIDIOC_S_FMT, f); |
| out: |
| mutex_unlock(&dev->lock); |
| return rc; |
| } |
| |
| static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * norm) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| |
| /* FIXME: when we support something other than NTSC, we are going to |
| have to make the au0828 bridge adjust the size of its capture |
| buffer, which is currently hardcoded at 720x480 */ |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, *norm); |
| return 0; |
| } |
| |
| static int vidioc_enum_input(struct file *file, void *priv, |
| struct v4l2_input *input) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| unsigned int tmp; |
| |
| static const char *inames[] = { |
| [AU0828_VMUX_UNDEFINED] = "Undefined", |
| [AU0828_VMUX_COMPOSITE] = "Composite", |
| [AU0828_VMUX_SVIDEO] = "S-Video", |
| [AU0828_VMUX_CABLE] = "Cable TV", |
| [AU0828_VMUX_TELEVISION] = "Television", |
| [AU0828_VMUX_DVB] = "DVB", |
| [AU0828_VMUX_DEBUG] = "tv debug" |
| }; |
| |
| tmp = input->index; |
| |
| if (tmp >= AU0828_MAX_INPUT) |
| return -EINVAL; |
| if (AUVI_INPUT(tmp).type == 0) |
| return -EINVAL; |
| |
| input->index = tmp; |
| strcpy(input->name, inames[AUVI_INPUT(tmp).type]); |
| if ((AUVI_INPUT(tmp).type == AU0828_VMUX_TELEVISION) || |
| (AUVI_INPUT(tmp).type == AU0828_VMUX_CABLE)) |
| input->type |= V4L2_INPUT_TYPE_TUNER; |
| else |
| input->type |= V4L2_INPUT_TYPE_CAMERA; |
| |
| input->std = dev->vdev->tvnorms; |
| |
| return 0; |
| } |
| |
| static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| *i = dev->ctrl_input; |
| return 0; |
| } |
| |
| static int vidioc_s_input(struct file *file, void *priv, unsigned int index) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| int i; |
| |
| dprintk(1, "VIDIOC_S_INPUT in function %s, input=%d\n", __func__, |
| index); |
| if (index >= AU0828_MAX_INPUT) |
| return -EINVAL; |
| if (AUVI_INPUT(index).type == 0) |
| return -EINVAL; |
| dev->ctrl_input = index; |
| |
| switch (AUVI_INPUT(index).type) { |
| case AU0828_VMUX_SVIDEO: |
| dev->input_type = AU0828_VMUX_SVIDEO; |
| break; |
| case AU0828_VMUX_COMPOSITE: |
| dev->input_type = AU0828_VMUX_COMPOSITE; |
| break; |
| case AU0828_VMUX_TELEVISION: |
| dev->input_type = AU0828_VMUX_TELEVISION; |
| break; |
| default: |
| dprintk(1, "VIDIOC_S_INPUT unknown input type set [%d]\n", |
| AUVI_INPUT(index).type); |
| break; |
| } |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing, |
| AUVI_INPUT(index).vmux, 0, 0); |
| |
| for (i = 0; i < AU0828_MAX_INPUT; i++) { |
| int enable = 0; |
| if (AUVI_INPUT(i).audio_setup == NULL) |
| continue; |
| |
| if (i == index) |
| enable = 1; |
| else |
| enable = 0; |
| if (enable) { |
| (AUVI_INPUT(i).audio_setup)(dev, enable); |
| } else { |
| /* Make sure we leave it turned on if some |
| other input is routed to this callback */ |
| if ((AUVI_INPUT(i).audio_setup) != |
| ((AUVI_INPUT(index).audio_setup))) { |
| (AUVI_INPUT(i).audio_setup)(dev, enable); |
| } |
| } |
| } |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, audio, s_routing, |
| AUVI_INPUT(index).amux, 0, 0); |
| return 0; |
| } |
| |
| static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| unsigned int index = a->index; |
| |
| if (a->index > 1) |
| return -EINVAL; |
| |
| index = dev->ctrl_ainput; |
| if (index == 0) |
| strcpy(a->name, "Television"); |
| else |
| strcpy(a->name, "Line in"); |
| |
| a->capability = V4L2_AUDCAP_STEREO; |
| a->index = index; |
| return 0; |
| } |
| |
| static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| if (a->index != dev->ctrl_ainput) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static int vidioc_g_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_ctrl, ctrl); |
| return 0; |
| |
| } |
| |
| static int vidioc_s_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_ctrl, ctrl); |
| return 0; |
| } |
| |
| static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| |
| if (t->index != 0) |
| return -EINVAL; |
| |
| strcpy(t->name, "Auvitek tuner"); |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t); |
| return 0; |
| } |
| |
| static int vidioc_s_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *t) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| |
| if (t->index != 0) |
| return -EINVAL; |
| |
| t->type = V4L2_TUNER_ANALOG_TV; |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t); |
| dprintk(1, "VIDIOC_S_TUNER: signal = %x, afc = %x\n", t->signal, |
| t->afc); |
| return 0; |
| |
| } |
| |
| static int vidioc_g_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *freq) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| |
| freq->type = V4L2_TUNER_ANALOG_TV; |
| freq->frequency = dev->ctrl_freq; |
| return 0; |
| } |
| |
| static int vidioc_s_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *freq) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| |
| if (freq->tuner != 0) |
| return -EINVAL; |
| if (freq->type != V4L2_TUNER_ANALOG_TV) |
| return -EINVAL; |
| |
| dev->ctrl_freq = freq->frequency; |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, freq); |
| |
| au0828_analog_stream_reset(dev); |
| |
| return 0; |
| } |
| |
| |
| /* RAW VBI ioctls */ |
| |
| static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv, |
| struct v4l2_format *format) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| |
| format->fmt.vbi.samples_per_line = dev->vbi_width; |
| format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; |
| format->fmt.vbi.offset = 0; |
| format->fmt.vbi.flags = 0; |
| format->fmt.vbi.sampling_rate = 6750000 * 4 / 2; |
| |
| format->fmt.vbi.count[0] = dev->vbi_height; |
| format->fmt.vbi.count[1] = dev->vbi_height; |
| format->fmt.vbi.start[0] = 21; |
| format->fmt.vbi.start[1] = 284; |
| |
| return 0; |
| } |
| |
| static int vidioc_g_chip_ident(struct file *file, void *priv, |
| struct v4l2_dbg_chip_ident *chip) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| chip->ident = V4L2_IDENT_NONE; |
| chip->revision = 0; |
| |
| if (v4l2_chip_match_host(&chip->match)) { |
| chip->ident = V4L2_IDENT_AU0828; |
| return 0; |
| } |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_chip_ident, chip); |
| if (chip->ident == V4L2_IDENT_NONE) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int vidioc_cropcap(struct file *file, void *priv, |
| struct v4l2_cropcap *cc) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| |
| if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| |
| cc->bounds.left = 0; |
| cc->bounds.top = 0; |
| cc->bounds.width = dev->width; |
| cc->bounds.height = dev->height; |
| |
| cc->defrect = cc->bounds; |
| |
| cc->pixelaspect.numerator = 54; |
| cc->pixelaspect.denominator = 59; |
| |
| return 0; |
| } |
| |
| static int vidioc_streamon(struct file *file, void *priv, |
| enum v4l2_buf_type type) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| int rc = -EINVAL; |
| |
| rc = check_dev(dev); |
| if (rc < 0) |
| return rc; |
| |
| if (unlikely(type != fh->type)) |
| return -EINVAL; |
| |
| dprintk(1, "vidioc_streamon fh=%p t=%d fh->res=%d dev->res=%d\n", |
| fh, type, fh->resources, dev->resources); |
| |
| if (unlikely(!res_get(fh, get_ressource(fh)))) |
| return -EBUSY; |
| |
| if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { |
| au0828_analog_stream_enable(dev); |
| v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 1); |
| } |
| |
| if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { |
| rc = videobuf_streamon(&fh->vb_vidq); |
| dev->vid_timeout_running = 1; |
| mod_timer(&dev->vid_timeout, jiffies + (HZ / 10)); |
| } else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { |
| rc = videobuf_streamon(&fh->vb_vbiq); |
| dev->vbi_timeout_running = 1; |
| mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); |
| } |
| |
| return rc; |
| } |
| |
| static int vidioc_streamoff(struct file *file, void *priv, |
| enum v4l2_buf_type type) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| int rc; |
| int i; |
| |
| rc = check_dev(dev); |
| if (rc < 0) |
| return rc; |
| |
| if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && |
| fh->type != V4L2_BUF_TYPE_VBI_CAPTURE) |
| return -EINVAL; |
| if (type != fh->type) |
| return -EINVAL; |
| |
| dprintk(1, "vidioc_streamoff fh=%p t=%d fh->res=%d dev->res=%d\n", |
| fh, type, fh->resources, dev->resources); |
| |
| if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { |
| dev->vid_timeout_running = 0; |
| del_timer_sync(&dev->vid_timeout); |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0); |
| rc = au0828_stream_interrupt(dev); |
| if (rc != 0) |
| return rc; |
| |
| for (i = 0; i < AU0828_MAX_INPUT; i++) { |
| if (AUVI_INPUT(i).audio_setup == NULL) |
| continue; |
| (AUVI_INPUT(i).audio_setup)(dev, 0); |
| } |
| |
| videobuf_streamoff(&fh->vb_vidq); |
| res_free(fh, AU0828_RESOURCE_VIDEO); |
| } else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { |
| dev->vbi_timeout_running = 0; |
| del_timer_sync(&dev->vbi_timeout); |
| |
| videobuf_streamoff(&fh->vb_vbiq); |
| res_free(fh, AU0828_RESOURCE_VBI); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static int vidioc_g_register(struct file *file, void *priv, |
| struct v4l2_dbg_register *reg) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| |
| switch (reg->match.type) { |
| case V4L2_CHIP_MATCH_I2C_DRIVER: |
| v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_register, reg); |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int vidioc_s_register(struct file *file, void *priv, |
| struct v4l2_dbg_register *reg) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| |
| switch (reg->match.type) { |
| case V4L2_CHIP_MATCH_I2C_DRIVER: |
| v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_register, reg); |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| #endif |
| |
| static int vidioc_reqbufs(struct file *file, void *priv, |
| struct v4l2_requestbuffers *rb) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| int rc; |
| |
| rc = check_dev(dev); |
| if (rc < 0) |
| return rc; |
| |
| return videobuf_reqbufs(&fh->vb_vidq, rb); |
| } |
| |
| static int vidioc_querybuf(struct file *file, void *priv, |
| struct v4l2_buffer *b) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| int rc; |
| |
| rc = check_dev(dev); |
| if (rc < 0) |
| return rc; |
| |
| return videobuf_querybuf(&fh->vb_vidq, b); |
| } |
| |
| static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| int rc; |
| |
| rc = check_dev(dev); |
| if (rc < 0) |
| return rc; |
| |
| return videobuf_qbuf(&fh->vb_vidq, b); |
| } |
| |
| static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) |
| { |
| struct au0828_fh *fh = priv; |
| struct au0828_dev *dev = fh->dev; |
| int rc; |
| |
| rc = check_dev(dev); |
| if (rc < 0) |
| return rc; |
| |
| /* Workaround for a bug in the au0828 hardware design that sometimes |
| results in the colorspace being inverted */ |
| if (dev->greenscreen_detected == 1) { |
| dprintk(1, "Detected green frame. Resetting stream...\n"); |
| au0828_analog_stream_reset(dev); |
| dev->greenscreen_detected = 0; |
| } |
| |
| return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK); |
| } |
| |
| static struct v4l2_file_operations au0828_v4l_fops = { |
| .owner = THIS_MODULE, |
| .open = au0828_v4l2_open, |
| .release = au0828_v4l2_close, |
| .read = au0828_v4l2_read, |
| .poll = au0828_v4l2_poll, |
| .mmap = au0828_v4l2_mmap, |
| .ioctl = video_ioctl2, |
| }; |
| |
| static const struct v4l2_ioctl_ops video_ioctl_ops = { |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, |
| .vidioc_g_fmt_vbi_cap = vidioc_g_fmt_vbi_cap, |
| .vidioc_s_fmt_vbi_cap = vidioc_g_fmt_vbi_cap, |
| .vidioc_g_audio = vidioc_g_audio, |
| .vidioc_s_audio = vidioc_s_audio, |
| .vidioc_cropcap = vidioc_cropcap, |
| .vidioc_reqbufs = vidioc_reqbufs, |
| .vidioc_querybuf = vidioc_querybuf, |
| .vidioc_qbuf = vidioc_qbuf, |
| .vidioc_dqbuf = vidioc_dqbuf, |
| .vidioc_s_std = vidioc_s_std, |
| .vidioc_enum_input = vidioc_enum_input, |
| .vidioc_g_input = vidioc_g_input, |
| .vidioc_s_input = vidioc_s_input, |
| .vidioc_queryctrl = vidioc_queryctrl, |
| .vidioc_g_ctrl = vidioc_g_ctrl, |
| .vidioc_s_ctrl = vidioc_s_ctrl, |
| .vidioc_streamon = vidioc_streamon, |
| .vidioc_streamoff = vidioc_streamoff, |
| .vidioc_g_tuner = vidioc_g_tuner, |
| .vidioc_s_tuner = vidioc_s_tuner, |
| .vidioc_g_frequency = vidioc_g_frequency, |
| .vidioc_s_frequency = vidioc_s_frequency, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .vidioc_g_register = vidioc_g_register, |
| .vidioc_s_register = vidioc_s_register, |
| #endif |
| .vidioc_g_chip_ident = vidioc_g_chip_ident, |
| }; |
| |
| static const struct video_device au0828_video_template = { |
| .fops = &au0828_v4l_fops, |
| .release = video_device_release, |
| .ioctl_ops = &video_ioctl_ops, |
| .tvnorms = V4L2_STD_NTSC_M, |
| .current_norm = V4L2_STD_NTSC_M, |
| }; |
| |
| /**************************************************************************/ |
| |
| int au0828_analog_register(struct au0828_dev *dev, |
| struct usb_interface *interface) |
| { |
| int retval = -ENOMEM; |
| struct usb_host_interface *iface_desc; |
| struct usb_endpoint_descriptor *endpoint; |
| int i; |
| |
| dprintk(1, "au0828_analog_register called!\n"); |
| |
| /* set au0828 usb interface0 to as5 */ |
| retval = usb_set_interface(dev->usbdev, |
| interface->cur_altsetting->desc.bInterfaceNumber, 5); |
| if (retval != 0) { |
| printk(KERN_INFO "Failure setting usb interface0 to as5\n"); |
| return retval; |
| } |
| |
| /* Figure out which endpoint has the isoc interface */ |
| iface_desc = interface->cur_altsetting; |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { |
| endpoint = &iface_desc->endpoint[i].desc; |
| if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) |
| == USB_DIR_IN) && |
| ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) |
| == USB_ENDPOINT_XFER_ISOC)) { |
| |
| /* we find our isoc in endpoint */ |
| u16 tmp = le16_to_cpu(endpoint->wMaxPacketSize); |
| dev->max_pkt_size = (tmp & 0x07ff) * |
| (((tmp & 0x1800) >> 11) + 1); |
| dev->isoc_in_endpointaddr = endpoint->bEndpointAddress; |
| } |
| } |
| if (!(dev->isoc_in_endpointaddr)) { |
| printk(KERN_INFO "Could not locate isoc endpoint\n"); |
| kfree(dev); |
| return -ENODEV; |
| } |
| |
| init_waitqueue_head(&dev->open); |
| spin_lock_init(&dev->slock); |
| mutex_init(&dev->lock); |
| |
| /* init video dma queues */ |
| INIT_LIST_HEAD(&dev->vidq.active); |
| INIT_LIST_HEAD(&dev->vidq.queued); |
| INIT_LIST_HEAD(&dev->vbiq.active); |
| INIT_LIST_HEAD(&dev->vbiq.queued); |
| |
| dev->vid_timeout.function = au0828_vid_buffer_timeout; |
| dev->vid_timeout.data = (unsigned long) dev; |
| init_timer(&dev->vid_timeout); |
| |
| dev->vbi_timeout.function = au0828_vbi_buffer_timeout; |
| dev->vbi_timeout.data = (unsigned long) dev; |
| init_timer(&dev->vbi_timeout); |
| |
| dev->width = NTSC_STD_W; |
| dev->height = NTSC_STD_H; |
| dev->field_size = dev->width * dev->height; |
| dev->frame_size = dev->field_size << 1; |
| dev->bytesperline = dev->width << 1; |
| dev->ctrl_ainput = 0; |
| |
| /* allocate and fill v4l2 video struct */ |
| dev->vdev = video_device_alloc(); |
| if (NULL == dev->vdev) { |
| dprintk(1, "Can't allocate video_device.\n"); |
| return -ENOMEM; |
| } |
| |
| /* allocate the VBI struct */ |
| dev->vbi_dev = video_device_alloc(); |
| if (NULL == dev->vbi_dev) { |
| dprintk(1, "Can't allocate vbi_device.\n"); |
| kfree(dev->vdev); |
| return -ENOMEM; |
| } |
| |
| /* Fill the video capture device struct */ |
| *dev->vdev = au0828_video_template; |
| dev->vdev->parent = &dev->usbdev->dev; |
| strcpy(dev->vdev->name, "au0828a video"); |
| |
| /* Setup the VBI device */ |
| *dev->vbi_dev = au0828_video_template; |
| dev->vbi_dev->parent = &dev->usbdev->dev; |
| strcpy(dev->vbi_dev->name, "au0828a vbi"); |
| |
| /* Register the v4l2 device */ |
| video_set_drvdata(dev->vdev, dev); |
| retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1); |
| if (retval != 0) { |
| dprintk(1, "unable to register video device (error = %d).\n", |
| retval); |
| video_device_release(dev->vdev); |
| return -ENODEV; |
| } |
| |
| /* Register the vbi device */ |
| video_set_drvdata(dev->vbi_dev, dev); |
| retval = video_register_device(dev->vbi_dev, VFL_TYPE_VBI, -1); |
| if (retval != 0) { |
| dprintk(1, "unable to register vbi device (error = %d).\n", |
| retval); |
| video_device_release(dev->vbi_dev); |
| video_device_release(dev->vdev); |
| return -ENODEV; |
| } |
| |
| dprintk(1, "%s completed!\n", __func__); |
| |
| return 0; |
| } |
| |