| /* |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2015 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2015 Intel Corporation. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * - Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * - Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * - Neither the name of Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| #include "hfi.h" |
| |
| int set_qsfp_tx(struct hfi1_pportdata *ppd, int on) |
| { |
| u8 tx_ctrl_byte = on ? 0x0 : 0xF; |
| int ret = 0; |
| |
| ret = qsfp_write(ppd, ppd->dd->hfi1_id, QSFP_TX_CTRL_BYTE_OFFS, |
| &tx_ctrl_byte, 1); |
| /* we expected 1, so consider 0 an error */ |
| if (ret == 0) |
| ret = -EIO; |
| else if (ret == 1) |
| ret = 0; |
| return ret; |
| } |
| |
| static int qual_power(struct hfi1_pportdata *ppd) |
| { |
| u32 cable_power_class = 0, power_class_max = 0; |
| u8 *cache = ppd->qsfp_info.cache; |
| int ret = 0; |
| |
| ret = get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_SYSTEM_TABLE, 0, |
| SYSTEM_TABLE_QSFP_POWER_CLASS_MAX, &power_class_max, 4); |
| if (ret) |
| return ret; |
| |
| if (QSFP_HIGH_PWR(cache[QSFP_MOD_PWR_OFFS]) != 4) |
| cable_power_class = QSFP_HIGH_PWR(cache[QSFP_MOD_PWR_OFFS]); |
| else |
| cable_power_class = QSFP_PWR(cache[QSFP_MOD_PWR_OFFS]); |
| |
| if (cable_power_class <= 3 && cable_power_class > (power_class_max - 1)) |
| ppd->offline_disabled_reason = |
| HFI1_ODR_MASK(OPA_LINKDOWN_REASON_POWER_POLICY); |
| else if (cable_power_class > 4 && cable_power_class > (power_class_max)) |
| ppd->offline_disabled_reason = |
| HFI1_ODR_MASK(OPA_LINKDOWN_REASON_POWER_POLICY); |
| /* |
| * cable_power_class will never have value 4 as this simply |
| * means the high power settings are unused |
| */ |
| |
| if (ppd->offline_disabled_reason == |
| HFI1_ODR_MASK(OPA_LINKDOWN_REASON_POWER_POLICY)) { |
| dd_dev_info( |
| ppd->dd, |
| "%s: Port disabled due to system power restrictions\n", |
| __func__); |
| ret = -EPERM; |
| } |
| return ret; |
| } |
| |
| static int qual_bitrate(struct hfi1_pportdata *ppd) |
| { |
| u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled; |
| u8 *cache = ppd->qsfp_info.cache; |
| |
| if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G) && |
| cache[QSFP_NOM_BIT_RATE_250_OFFS] < 0x64) |
| ppd->offline_disabled_reason = |
| HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY); |
| |
| if ((lss & OPA_LINK_SPEED_12_5G) && (lse & OPA_LINK_SPEED_12_5G) && |
| cache[QSFP_NOM_BIT_RATE_100_OFFS] < 0x7D) |
| ppd->offline_disabled_reason = |
| HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY); |
| |
| if (ppd->offline_disabled_reason == |
| HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY)) { |
| dd_dev_info( |
| ppd->dd, |
| "%s: Cable failed bitrate check, disabling port\n", |
| __func__); |
| return -EPERM; |
| } |
| return 0; |
| } |
| |
| static int set_qsfp_high_power(struct hfi1_pportdata *ppd) |
| { |
| u8 cable_power_class = 0, power_ctrl_byte = 0; |
| u8 *cache = ppd->qsfp_info.cache; |
| int ret; |
| |
| if (QSFP_HIGH_PWR(cache[QSFP_MOD_PWR_OFFS]) != 4) |
| cable_power_class = QSFP_HIGH_PWR(cache[QSFP_MOD_PWR_OFFS]); |
| else |
| cable_power_class = QSFP_PWR(cache[QSFP_MOD_PWR_OFFS]); |
| |
| if (cable_power_class) { |
| power_ctrl_byte = cache[QSFP_PWR_CTRL_BYTE_OFFS]; |
| |
| power_ctrl_byte |= 1; |
| power_ctrl_byte &= ~(0x2); |
| |
| ret = qsfp_write(ppd, ppd->dd->hfi1_id, |
| QSFP_PWR_CTRL_BYTE_OFFS, |
| &power_ctrl_byte, 1); |
| if (ret != 1) |
| return -EIO; |
| |
| if (cable_power_class > 3) { |
| /* > power class 4*/ |
| power_ctrl_byte |= (1 << 2); |
| ret = qsfp_write(ppd, ppd->dd->hfi1_id, |
| QSFP_PWR_CTRL_BYTE_OFFS, |
| &power_ctrl_byte, 1); |
| if (ret != 1) |
| return -EIO; |
| } |
| |
| /* SFF 8679 rev 1.7 LPMode Deassert time */ |
| msleep(300); |
| } |
| return 0; |
| } |
| |
| static void apply_rx_cdr(struct hfi1_pportdata *ppd, |
| u32 rx_preset_index, |
| u8 *cdr_ctrl_byte) |
| { |
| u32 rx_preset; |
| u8 *cache = ppd->qsfp_info.cache; |
| |
| if (!((cache[QSFP_MOD_PWR_OFFS] & 0x4) && |
| (cache[QSFP_CDR_INFO_OFFS] & 0x40))) |
| return; |
| |
| /* rx_preset preset to zero to catch error */ |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE, |
| rx_preset_index, RX_PRESET_TABLE_QSFP_RX_CDR_APPLY, |
| &rx_preset, 4); |
| |
| if (!rx_preset) { |
| dd_dev_info( |
| ppd->dd, |
| "%s: RX_CDR_APPLY is set to disabled\n", |
| __func__); |
| return; |
| } |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE, |
| rx_preset_index, RX_PRESET_TABLE_QSFP_RX_CDR, |
| &rx_preset, 4); |
| |
| /* Expand cdr setting to all 4 lanes */ |
| rx_preset = (rx_preset | (rx_preset << 1) | |
| (rx_preset << 2) | (rx_preset << 3)); |
| |
| if (rx_preset) { |
| *cdr_ctrl_byte |= rx_preset; |
| } else { |
| *cdr_ctrl_byte &= rx_preset; |
| /* Preserve current TX CDR status */ |
| *cdr_ctrl_byte |= (cache[QSFP_CDR_CTRL_BYTE_OFFS] & 0xF0); |
| } |
| } |
| |
| static void apply_tx_cdr(struct hfi1_pportdata *ppd, |
| u32 tx_preset_index, |
| u8 *ctr_ctrl_byte) |
| { |
| u32 tx_preset; |
| u8 *cache = ppd->qsfp_info.cache; |
| |
| if (!((cache[QSFP_MOD_PWR_OFFS] & 0x8) && |
| (cache[QSFP_CDR_INFO_OFFS] & 0x80))) |
| return; |
| |
| get_platform_config_field( |
| ppd->dd, |
| PLATFORM_CONFIG_TX_PRESET_TABLE, tx_preset_index, |
| TX_PRESET_TABLE_QSFP_TX_CDR_APPLY, &tx_preset, 4); |
| |
| if (!tx_preset) { |
| dd_dev_info( |
| ppd->dd, |
| "%s: TX_CDR_APPLY is set to disabled\n", |
| __func__); |
| return; |
| } |
| get_platform_config_field( |
| ppd->dd, |
| PLATFORM_CONFIG_TX_PRESET_TABLE, |
| tx_preset_index, |
| TX_PRESET_TABLE_QSFP_TX_CDR, &tx_preset, 4); |
| |
| /* Expand cdr setting to all 4 lanes */ |
| tx_preset = (tx_preset | (tx_preset << 1) | |
| (tx_preset << 2) | (tx_preset << 3)); |
| |
| if (tx_preset) |
| *ctr_ctrl_byte |= (tx_preset << 4); |
| else |
| /* Preserve current/determined RX CDR status */ |
| *ctr_ctrl_byte &= ((tx_preset << 4) | 0xF); |
| } |
| |
| static void apply_cdr_settings( |
| struct hfi1_pportdata *ppd, u32 rx_preset_index, |
| u32 tx_preset_index) |
| { |
| u8 *cache = ppd->qsfp_info.cache; |
| u8 cdr_ctrl_byte = cache[QSFP_CDR_CTRL_BYTE_OFFS]; |
| |
| apply_rx_cdr(ppd, rx_preset_index, &cdr_ctrl_byte); |
| |
| apply_tx_cdr(ppd, tx_preset_index, &cdr_ctrl_byte); |
| |
| qsfp_write(ppd, ppd->dd->hfi1_id, QSFP_CDR_CTRL_BYTE_OFFS, |
| &cdr_ctrl_byte, 1); |
| } |
| |
| static void apply_tx_eq_auto(struct hfi1_pportdata *ppd) |
| { |
| u8 *cache = ppd->qsfp_info.cache; |
| u8 tx_eq; |
| |
| if (!(cache[QSFP_EQ_INFO_OFFS] & 0x8)) |
| return; |
| /* Disable adaptive TX EQ if present */ |
| tx_eq = cache[(128 * 3) + 241]; |
| tx_eq &= 0xF0; |
| qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 241, &tx_eq, 1); |
| } |
| |
| static void apply_tx_eq_prog(struct hfi1_pportdata *ppd, u32 tx_preset_index) |
| { |
| u8 *cache = ppd->qsfp_info.cache; |
| u32 tx_preset; |
| u8 tx_eq; |
| |
| if (!(cache[QSFP_EQ_INFO_OFFS] & 0x4)) |
| return; |
| |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, |
| tx_preset_index, TX_PRESET_TABLE_QSFP_TX_EQ_APPLY, |
| &tx_preset, 4); |
| if (!tx_preset) { |
| dd_dev_info( |
| ppd->dd, |
| "%s: TX_EQ_APPLY is set to disabled\n", |
| __func__); |
| return; |
| } |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, |
| tx_preset_index, TX_PRESET_TABLE_QSFP_TX_EQ, |
| &tx_preset, 4); |
| |
| if (((cache[(128 * 3) + 224] & 0xF0) >> 4) < tx_preset) { |
| dd_dev_info( |
| ppd->dd, |
| "%s: TX EQ %x unsupported\n", |
| __func__, tx_preset); |
| |
| dd_dev_info( |
| ppd->dd, |
| "%s: Applying EQ %x\n", |
| __func__, cache[608] & 0xF0); |
| |
| tx_preset = (cache[608] & 0xF0) >> 4; |
| } |
| |
| tx_eq = tx_preset | (tx_preset << 4); |
| qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 234, &tx_eq, 1); |
| qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 235, &tx_eq, 1); |
| } |
| |
| static void apply_rx_eq_emp(struct hfi1_pportdata *ppd, u32 rx_preset_index) |
| { |
| u32 rx_preset; |
| u8 rx_eq, *cache = ppd->qsfp_info.cache; |
| |
| if (!(cache[QSFP_EQ_INFO_OFFS] & 0x2)) |
| return; |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE, |
| rx_preset_index, RX_PRESET_TABLE_QSFP_RX_EMP_APPLY, |
| &rx_preset, 4); |
| |
| if (!rx_preset) { |
| dd_dev_info( |
| ppd->dd, |
| "%s: RX_EMP_APPLY is set to disabled\n", |
| __func__); |
| return; |
| } |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE, |
| rx_preset_index, RX_PRESET_TABLE_QSFP_RX_EMP, |
| &rx_preset, 4); |
| |
| if ((cache[(128 * 3) + 224] & 0xF) < rx_preset) { |
| dd_dev_info( |
| ppd->dd, |
| "%s: Requested RX EMP %x\n", |
| __func__, rx_preset); |
| |
| dd_dev_info( |
| ppd->dd, |
| "%s: Applying supported EMP %x\n", |
| __func__, cache[608] & 0xF); |
| |
| rx_preset = cache[608] & 0xF; |
| } |
| |
| rx_eq = rx_preset | (rx_preset << 4); |
| |
| qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 236, &rx_eq, 1); |
| qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 237, &rx_eq, 1); |
| } |
| |
| static void apply_eq_settings(struct hfi1_pportdata *ppd, |
| u32 rx_preset_index, u32 tx_preset_index) |
| { |
| u8 *cache = ppd->qsfp_info.cache; |
| |
| /* no point going on w/o a page 3 */ |
| if (cache[2] & 4) { |
| dd_dev_info(ppd->dd, |
| "%s: Upper page 03 not present\n", |
| __func__); |
| return; |
| } |
| |
| apply_tx_eq_auto(ppd); |
| |
| apply_tx_eq_prog(ppd, tx_preset_index); |
| |
| apply_rx_eq_emp(ppd, rx_preset_index); |
| } |
| |
| static void apply_rx_amplitude_settings( |
| struct hfi1_pportdata *ppd, u32 rx_preset_index, |
| u32 tx_preset_index) |
| { |
| u32 rx_preset; |
| u8 rx_amp = 0, i = 0, preferred = 0, *cache = ppd->qsfp_info.cache; |
| |
| /* no point going on w/o a page 3 */ |
| if (cache[2] & 4) { |
| dd_dev_info(ppd->dd, |
| "%s: Upper page 03 not present\n", |
| __func__); |
| return; |
| } |
| if (!(cache[QSFP_EQ_INFO_OFFS] & 0x1)) { |
| dd_dev_info(ppd->dd, |
| "%s: RX_AMP_APPLY is set to disabled\n", |
| __func__); |
| return; |
| } |
| |
| get_platform_config_field(ppd->dd, |
| PLATFORM_CONFIG_RX_PRESET_TABLE, |
| rx_preset_index, |
| RX_PRESET_TABLE_QSFP_RX_AMP_APPLY, |
| &rx_preset, 4); |
| |
| if (!rx_preset) { |
| dd_dev_info(ppd->dd, |
| "%s: RX_AMP_APPLY is set to disabled\n", |
| __func__); |
| return; |
| } |
| get_platform_config_field(ppd->dd, |
| PLATFORM_CONFIG_RX_PRESET_TABLE, |
| rx_preset_index, |
| RX_PRESET_TABLE_QSFP_RX_AMP, |
| &rx_preset, 4); |
| |
| dd_dev_info(ppd->dd, |
| "%s: Requested RX AMP %x\n", |
| __func__, |
| rx_preset); |
| |
| for (i = 0; i < 4; i++) { |
| if (cache[(128 * 3) + 225] & (1 << i)) { |
| preferred = i; |
| if (preferred == rx_preset) |
| break; |
| } |
| } |
| |
| /* |
| * Verify that preferred RX amplitude is not just a |
| * fall through of the default |
| */ |
| if (!preferred && !(cache[(128 * 3) + 225] & 0x1)) { |
| dd_dev_info(ppd->dd, "No supported RX AMP, not applying\n"); |
| return; |
| } |
| |
| dd_dev_info(ppd->dd, |
| "%s: Applying RX AMP %x\n", __func__, preferred); |
| |
| rx_amp = preferred | (preferred << 4); |
| qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 238, &rx_amp, 1); |
| qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 239, &rx_amp, 1); |
| } |
| |
| #define OPA_INVALID_INDEX 0xFFF |
| |
| static void apply_tx_lanes(struct hfi1_pportdata *ppd, u32 config_data, |
| const char *message) |
| { |
| u8 i; |
| int ret = HCMD_SUCCESS; |
| |
| for (i = 0; i < 4; i++) { |
| ret = load_8051_config(ppd->dd, 0, i, config_data); |
| if (ret != HCMD_SUCCESS) { |
| dd_dev_err( |
| ppd->dd, |
| "%s: %s for lane %u failed\n", |
| message, __func__, i); |
| } |
| } |
| } |
| |
| static void apply_tunings( |
| struct hfi1_pportdata *ppd, u32 tx_preset_index, |
| u8 tuning_method, u32 total_atten, u8 limiting_active) |
| { |
| int ret = 0; |
| u32 config_data = 0, tx_preset = 0; |
| u8 precur = 0, attn = 0, postcur = 0, external_device_config = 0; |
| u8 *cache = ppd->qsfp_info.cache; |
| |
| read_8051_config(ppd->dd, LINK_OPTIMIZATION_SETTINGS, |
| GENERAL_CONFIG, &config_data); |
| config_data |= limiting_active; |
| ret = load_8051_config(ppd->dd, LINK_OPTIMIZATION_SETTINGS, |
| GENERAL_CONFIG, config_data); |
| if (ret != HCMD_SUCCESS) |
| dd_dev_err( |
| ppd->dd, |
| "%s: Failed to set enable external device config\n", |
| __func__); |
| |
| config_data = 0; /* re-init */ |
| read_8051_config(ppd->dd, LINK_TUNING_PARAMETERS, GENERAL_CONFIG, |
| &config_data); |
| config_data |= tuning_method; |
| ret = load_8051_config(ppd->dd, LINK_TUNING_PARAMETERS, GENERAL_CONFIG, |
| config_data); |
| if (ret != HCMD_SUCCESS) |
| dd_dev_err(ppd->dd, "%s: Failed to set tuning method\n", |
| __func__); |
| |
| external_device_config = |
| ((cache[QSFP_MOD_PWR_OFFS] & 0x4) << 3) | |
| ((cache[QSFP_MOD_PWR_OFFS] & 0x8) << 2) | |
| ((cache[QSFP_EQ_INFO_OFFS] & 0x2) << 1) | |
| (cache[QSFP_EQ_INFO_OFFS] & 0x4); |
| |
| config_data = 0; /* re-init */ |
| read_8051_config(ppd->dd, DC_HOST_COMM_SETTINGS, GENERAL_CONFIG, |
| &config_data); |
| config_data |= (external_device_config << 24); |
| ret = load_8051_config(ppd->dd, DC_HOST_COMM_SETTINGS, GENERAL_CONFIG, |
| config_data); |
| if (ret != HCMD_SUCCESS) |
| dd_dev_err( |
| ppd->dd, |
| "%s: Failed to set external device config parameters\n", |
| __func__); |
| |
| config_data = 0; /* re-init */ |
| read_8051_config(ppd->dd, TX_SETTINGS, GENERAL_CONFIG, &config_data); |
| if ((ppd->link_speed_supported & OPA_LINK_SPEED_25G) && |
| (ppd->link_speed_enabled & OPA_LINK_SPEED_25G)) |
| config_data |= 0x02; |
| if ((ppd->link_speed_supported & OPA_LINK_SPEED_12_5G) && |
| (ppd->link_speed_enabled & OPA_LINK_SPEED_12_5G)) |
| config_data |= 0x01; |
| ret = load_8051_config(ppd->dd, TX_SETTINGS, GENERAL_CONFIG, |
| config_data); |
| if (ret != HCMD_SUCCESS) |
| dd_dev_err( |
| ppd->dd, |
| "%s: Failed to set external device config parameters\n", |
| __func__); |
| |
| config_data = (total_atten << 8) | (total_atten); |
| |
| apply_tx_lanes(ppd, config_data, "Setting channel loss"); |
| |
| if (tx_preset_index == OPA_INVALID_INDEX) |
| return; |
| |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, tx_preset_index, |
| TX_PRESET_TABLE_PRECUR, &tx_preset, 4); |
| precur = tx_preset; |
| |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, |
| tx_preset_index, TX_PRESET_TABLE_ATTN, &tx_preset, 4); |
| attn = tx_preset; |
| |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, |
| tx_preset_index, TX_PRESET_TABLE_POSTCUR, &tx_preset, 4); |
| postcur = tx_preset; |
| |
| config_data = precur | (attn << 8) | (postcur << 16); |
| |
| apply_tx_lanes(ppd, config_data, "Applying TX settings"); |
| } |
| |
| static int tune_active_qsfp(struct hfi1_pportdata *ppd, u32 *ptr_tx_preset, |
| u32 *ptr_rx_preset, u32 *ptr_total_atten) |
| { |
| int ret = 0; |
| u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled; |
| u8 *cache = ppd->qsfp_info.cache; |
| |
| ppd->qsfp_info.limiting_active = 1; |
| |
| ret = set_qsfp_tx(ppd, 0); |
| if (ret) |
| return ret; |
| |
| ret = qual_power(ppd); |
| if (ret) |
| return ret; |
| |
| ret = qual_bitrate(ppd); |
| if (ret) |
| return ret; |
| |
| if (ppd->qsfp_info.reset_needed) { |
| reset_qsfp(ppd); |
| ppd->qsfp_info.reset_needed = 0; |
| refresh_qsfp_cache(ppd, &ppd->qsfp_info); |
| } else { |
| ppd->qsfp_info.reset_needed = 1; |
| } |
| |
| ret = set_qsfp_high_power(ppd); |
| if (ret) |
| return ret; |
| |
| if (cache[QSFP_EQ_INFO_OFFS] & 0x4) { |
| ret = get_platform_config_field( |
| ppd->dd, |
| PLATFORM_CONFIG_PORT_TABLE, 0, |
| PORT_TABLE_TX_PRESET_IDX_ACTIVE_EQ, |
| ptr_tx_preset, 4); |
| if (ret) { |
| *ptr_tx_preset = OPA_INVALID_INDEX; |
| return ret; |
| } |
| } else { |
| ret = get_platform_config_field( |
| ppd->dd, |
| PLATFORM_CONFIG_PORT_TABLE, 0, |
| PORT_TABLE_TX_PRESET_IDX_ACTIVE_NO_EQ, |
| ptr_tx_preset, 4); |
| if (ret) { |
| *ptr_tx_preset = OPA_INVALID_INDEX; |
| return ret; |
| } |
| } |
| |
| ret = get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| PORT_TABLE_RX_PRESET_IDX, ptr_rx_preset, 4); |
| if (ret) { |
| *ptr_rx_preset = OPA_INVALID_INDEX; |
| return ret; |
| } |
| |
| if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G)) |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| PORT_TABLE_LOCAL_ATTEN_25G, ptr_total_atten, 4); |
| else if ((lss & OPA_LINK_SPEED_12_5G) && (lse & OPA_LINK_SPEED_12_5G)) |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| PORT_TABLE_LOCAL_ATTEN_12G, ptr_total_atten, 4); |
| |
| apply_cdr_settings(ppd, *ptr_rx_preset, *ptr_tx_preset); |
| |
| apply_eq_settings(ppd, *ptr_rx_preset, *ptr_tx_preset); |
| |
| apply_rx_amplitude_settings(ppd, *ptr_rx_preset, *ptr_tx_preset); |
| |
| ret = set_qsfp_tx(ppd, 1); |
| return ret; |
| } |
| |
| static int tune_qsfp(struct hfi1_pportdata *ppd, |
| u32 *ptr_tx_preset, u32 *ptr_rx_preset, |
| u8 *ptr_tuning_method, u32 *ptr_total_atten) |
| { |
| u32 cable_atten = 0, remote_atten = 0, platform_atten = 0; |
| u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled; |
| int ret = 0; |
| u8 *cache = ppd->qsfp_info.cache; |
| |
| switch ((cache[QSFP_MOD_TECH_OFFS] & 0xF0) >> 4) { |
| case 0xA ... 0xB: |
| ret = get_platform_config_field( |
| ppd->dd, |
| PLATFORM_CONFIG_PORT_TABLE, 0, |
| PORT_TABLE_LOCAL_ATTEN_25G, |
| &platform_atten, 4); |
| if (ret) |
| return ret; |
| |
| if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G)) |
| cable_atten = cache[QSFP_CU_ATTEN_12G_OFFS]; |
| else if ((lss & OPA_LINK_SPEED_12_5G) && |
| (lse & OPA_LINK_SPEED_12_5G)) |
| cable_atten = cache[QSFP_CU_ATTEN_7G_OFFS]; |
| |
| /* Fallback to configured attenuation if cable memory is bad */ |
| if (cable_atten == 0 || cable_atten > 36) { |
| ret = get_platform_config_field( |
| ppd->dd, |
| PLATFORM_CONFIG_SYSTEM_TABLE, 0, |
| SYSTEM_TABLE_QSFP_ATTENUATION_DEFAULT_25G, |
| &cable_atten, 4); |
| if (ret) |
| return ret; |
| } |
| |
| ret = get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| PORT_TABLE_REMOTE_ATTEN_25G, &remote_atten, 4); |
| if (ret) |
| return ret; |
| |
| *ptr_total_atten = platform_atten + cable_atten + remote_atten; |
| |
| *ptr_tuning_method = OPA_PASSIVE_TUNING; |
| break; |
| case 0x0 ... 0x9: /* fallthrough */ |
| case 0xC: /* fallthrough */ |
| case 0xE: |
| ret = tune_active_qsfp(ppd, ptr_tx_preset, ptr_rx_preset, |
| ptr_total_atten); |
| if (ret) |
| return ret; |
| |
| *ptr_tuning_method = OPA_ACTIVE_TUNING; |
| break; |
| case 0xD: /* fallthrough */ |
| case 0xF: |
| default: |
| dd_dev_info(ppd->dd, "%s: Unknown/unsupported cable\n", |
| __func__); |
| break; |
| } |
| return ret; |
| } |
| |
| /* |
| * This function communicates its success or failure via ppd->driver_link_ready |
| * Thus, it depends on its association with start_link(...) which checks |
| * driver_link_ready before proceeding with the link negotiation and |
| * initialization process. |
| */ |
| void tune_serdes(struct hfi1_pportdata *ppd) |
| { |
| int ret = 0; |
| u32 total_atten = 0; |
| u32 remote_atten = 0, platform_atten = 0; |
| u32 rx_preset_index, tx_preset_index; |
| u8 tuning_method = 0; |
| struct hfi1_devdata *dd = ppd->dd; |
| |
| rx_preset_index = OPA_INVALID_INDEX; |
| tx_preset_index = OPA_INVALID_INDEX; |
| |
| /* the link defaults to enabled */ |
| ppd->link_enabled = 1; |
| /* the driver link ready state defaults to not ready */ |
| ppd->driver_link_ready = 0; |
| ppd->offline_disabled_reason = HFI1_ODR_MASK(OPA_LINKDOWN_REASON_NONE); |
| |
| /* Skip the tuning for testing (loopback != none) and simulations */ |
| if (loopback != LOOPBACK_NONE || |
| ppd->dd->icode == ICODE_FUNCTIONAL_SIMULATOR || |
| !dd->pcfg_cache.cache_valid) { |
| ppd->driver_link_ready = 1; |
| return; |
| } |
| |
| ret = get_platform_config_field(ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| PORT_TABLE_PORT_TYPE, &ppd->port_type, |
| 4); |
| if (ret) |
| goto bail; |
| |
| switch (ppd->port_type) { |
| case PORT_TYPE_DISCONNECTED: |
| ppd->offline_disabled_reason = |
| HFI1_ODR_MASK(OPA_LINKDOWN_REASON_DISCONNECTED); |
| dd_dev_info(dd, "%s: Port disconnected, disabling port\n", |
| __func__); |
| goto bail; |
| case PORT_TYPE_FIXED: |
| /* platform_atten, remote_atten pre-zeroed to catch error */ |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| PORT_TABLE_LOCAL_ATTEN_25G, &platform_atten, 4); |
| |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| PORT_TABLE_REMOTE_ATTEN_25G, &remote_atten, 4); |
| |
| total_atten = platform_atten + remote_atten; |
| |
| tuning_method = OPA_PASSIVE_TUNING; |
| break; |
| case PORT_TYPE_VARIABLE: |
| if (qsfp_mod_present(ppd)) { |
| /* |
| * platform_atten, remote_atten pre-zeroed to |
| * catch error |
| */ |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| PORT_TABLE_LOCAL_ATTEN_25G, |
| &platform_atten, 4); |
| |
| get_platform_config_field( |
| ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| PORT_TABLE_REMOTE_ATTEN_25G, |
| &remote_atten, 4); |
| |
| total_atten = platform_atten + remote_atten; |
| |
| tuning_method = OPA_PASSIVE_TUNING; |
| } else |
| ppd->offline_disabled_reason = |
| HFI1_ODR_MASK(OPA_LINKDOWN_REASON_CHASSIS_CONFIG); |
| break; |
| case PORT_TYPE_QSFP: |
| if (qsfp_mod_present(ppd)) { |
| refresh_qsfp_cache(ppd, &ppd->qsfp_info); |
| |
| if (ppd->qsfp_info.cache_valid) { |
| ret = tune_qsfp(ppd, |
| &tx_preset_index, |
| &rx_preset_index, |
| &tuning_method, |
| &total_atten); |
| if (ret) |
| goto bail; |
| } else { |
| dd_dev_err(dd, |
| "%s: Reading QSFP memory failed\n", |
| __func__); |
| goto bail; |
| } |
| } else |
| ppd->offline_disabled_reason = |
| HFI1_ODR_MASK( |
| OPA_LINKDOWN_REASONLOCAL_MEDIA_NOT_INSTALLED); |
| break; |
| default: |
| dd_dev_info(ppd->dd, "%s: Unknown port type\n", __func__); |
| break; |
| } |
| if (ppd->offline_disabled_reason == |
| HFI1_ODR_MASK(OPA_LINKDOWN_REASON_NONE)) |
| apply_tunings(ppd, tx_preset_index, tuning_method, |
| total_atten, |
| ppd->qsfp_info.limiting_active); |
| |
| if (ppd->port_type == PORT_TYPE_QSFP) |
| refresh_qsfp_cache(ppd, &ppd->qsfp_info); |
| |
| ppd->driver_link_ready = 1; |
| |
| return; |
| bail: |
| ppd->driver_link_ready = 0; |
| } |