| config BF52x |
| def_bool y |
| depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527) |
| |
| if (BF52x) |
| |
| source "arch/blackfin/mach-bf527/boards/Kconfig" |
| |
| menu "BF527 Specific Configuration" |
| |
| comment "Alternative Multiplexing Scheme" |
| |
| choice |
| prompt "SPORT0" |
| default BF527_SPORT0_PORTG |
| help |
| Select PORT used for SPORT0. See Hardware Reference Manual |
| |
| config BF527_SPORT0_PORTF |
| bool "PORT F" |
| help |
| PORT F |
| |
| config BF527_SPORT0_PORTG |
| bool "PORT G" |
| help |
| PORT G |
| endchoice |
| |
| choice |
| prompt "SPORT0 TSCLK Location" |
| depends on BF527_SPORT0_PORTG |
| default BF527_SPORT0_TSCLK_PG10 |
| help |
| Select PIN used for SPORT0_TSCLK. See Hardware Reference Manual |
| |
| config BF527_SPORT0_TSCLK_PG10 |
| bool "PORT PG10" |
| help |
| PORT PG10 |
| |
| config BF527_SPORT0_TSCLK_PG14 |
| bool "PORT PG14" |
| help |
| PORT PG14 |
| endchoice |
| |
| choice |
| prompt "UART1" |
| default BF527_UART1_PORTF |
| help |
| Select PORT used for UART1. See Hardware Reference Manual |
| |
| config BF527_UART1_PORTF |
| bool "PORT F" |
| help |
| PORT F |
| |
| config BF527_UART1_PORTG |
| bool "PORT G" |
| help |
| PORT G |
| endchoice |
| |
| choice |
| prompt "NAND (NFC) Data" |
| default BF527_NAND_D_PORTH |
| help |
| Select PORT used for NAND Data Bus. See Hardware Reference Manual |
| |
| config BF527_NAND_D_PORTF |
| bool "PORT F" |
| help |
| PORT F |
| |
| config BF527_NAND_D_PORTH |
| bool "PORT H" |
| help |
| PORT H |
| endchoice |
| |
| comment "Interrupt Priority Assignment" |
| menu "Priority" |
| |
| config IRQ_PLL_WAKEUP |
| int "IRQ_PLL_WAKEUP" |
| default 7 |
| config IRQ_DMA0_ERROR |
| int "IRQ_DMA0_ERROR" |
| default 7 |
| config IRQ_DMAR0_BLK |
| int "IRQ_DMAR0_BLK" |
| default 7 |
| config IRQ_DMAR1_BLK |
| int "IRQ_DMAR1_BLK" |
| default 7 |
| config IRQ_DMAR0_OVR |
| int "IRQ_DMAR0_OVR" |
| default 7 |
| config IRQ_DMAR1_OVR |
| int "IRQ_DMAR1_OVR" |
| default 7 |
| config IRQ_PPI_ERROR |
| int "IRQ_PPI_ERROR" |
| default 7 |
| config IRQ_MAC_ERROR |
| int "IRQ_MAC_ERROR" |
| default 7 |
| config IRQ_SPORT0_ERROR |
| int "IRQ_SPORT0_ERROR" |
| default 7 |
| config IRQ_SPORT1_ERROR |
| int "IRQ_SPORT1_ERROR" |
| default 7 |
| config IRQ_UART0_ERROR |
| int "IRQ_UART0_ERROR" |
| default 7 |
| config IRQ_UART1_ERROR |
| int "IRQ_UART1_ERROR" |
| default 7 |
| config IRQ_RTC |
| int "IRQ_RTC" |
| default 8 |
| config IRQ_PPI |
| int "IRQ_PPI" |
| default 8 |
| config IRQ_SPORT0_RX |
| int "IRQ_SPORT0_RX" |
| default 9 |
| config IRQ_SPORT0_TX |
| int "IRQ_SPORT0_TX" |
| default 9 |
| config IRQ_SPORT1_RX |
| int "IRQ_SPORT1_RX" |
| default 9 |
| config IRQ_SPORT1_TX |
| int "IRQ_SPORT1_TX" |
| default 9 |
| config IRQ_TWI |
| int "IRQ_TWI" |
| default 10 |
| config IRQ_SPI |
| int "IRQ_SPI" |
| default 10 |
| config IRQ_UART0_RX |
| int "IRQ_UART0_RX" |
| default 10 |
| config IRQ_UART0_TX |
| int "IRQ_UART0_TX" |
| default 10 |
| config IRQ_UART1_RX |
| int "IRQ_UART1_RX" |
| default 10 |
| config IRQ_UART1_TX |
| int "IRQ_UART1_TX" |
| default 10 |
| config IRQ_OPTSEC |
| int "IRQ_OPTSEC" |
| default 11 |
| config IRQ_CNT |
| int "IRQ_CNT" |
| default 11 |
| config IRQ_MAC_RX |
| int "IRQ_MAC_RX" |
| default 11 |
| config IRQ_PORTH_INTA |
| int "IRQ_PORTH_INTA" |
| default 11 |
| config IRQ_MAC_TX |
| int "IRQ_MAC_TX/NFC" |
| default 11 |
| config IRQ_PORTH_INTB |
| int "IRQ_PORTH_INTB" |
| default 11 |
| config IRQ_TIMER0 |
| int "IRQ_TIMER0" |
| default 7 if TICKSOURCE_GPTMR0 |
| default 8 |
| config IRQ_TIMER1 |
| int "IRQ_TIMER1" |
| default 12 |
| config IRQ_TIMER2 |
| int "IRQ_TIMER2" |
| default 12 |
| config IRQ_TIMER3 |
| int "IRQ_TIMER3" |
| default 12 |
| config IRQ_TIMER4 |
| int "IRQ_TIMER4" |
| default 12 |
| config IRQ_TIMER5 |
| int "IRQ_TIMER5" |
| default 12 |
| config IRQ_TIMER6 |
| int "IRQ_TIMER6" |
| default 12 |
| config IRQ_TIMER7 |
| int "IRQ_TIMER7" |
| default 12 |
| config IRQ_PORTG_INTA |
| int "IRQ_PORTG_INTA" |
| default 12 |
| config IRQ_PORTG_INTB |
| int "IRQ_PORTG_INTB" |
| default 12 |
| config IRQ_MEM_DMA0 |
| int "IRQ_MEM_DMA0" |
| default 13 |
| config IRQ_MEM_DMA1 |
| int "IRQ_MEM_DMA1" |
| default 13 |
| config IRQ_WATCH |
| int "IRQ_WATCH" |
| default 13 |
| config IRQ_PORTF_INTA |
| int "IRQ_PORTF_INTA" |
| default 13 |
| config IRQ_PORTF_INTB |
| int "IRQ_PORTF_INTB" |
| default 13 |
| config IRQ_SPI_ERROR |
| int "IRQ_SPI_ERROR" |
| default 7 |
| config IRQ_NFC_ERROR |
| int "IRQ_NFC_ERROR" |
| default 7 |
| config IRQ_HDMA_ERROR |
| int "IRQ_HDMA_ERROR" |
| default 7 |
| config IRQ_HDMA |
| int "IRQ_HDMA" |
| default 7 |
| config IRQ_USB_EINT |
| int "IRQ_USB_EINT" |
| default 10 |
| config IRQ_USB_INT0 |
| int "IRQ_USB_INT0" |
| default 10 |
| config IRQ_USB_INT1 |
| int "IRQ_USB_INT1" |
| default 10 |
| config IRQ_USB_INT2 |
| int "IRQ_USB_INT2" |
| default 10 |
| config IRQ_USB_DMA |
| int "IRQ_USB_DMA" |
| default 10 |
| |
| help |
| Enter the priority numbers between 7-13 ONLY. Others are Reserved. |
| This applies to all the above. It is not recommended to assign the |
| highest priority number 7 to UART or any other device. |
| |
| endmenu |
| |
| endmenu |
| |
| endif |