| /************************************************************************ |
| * Copyright 2003 Digi International (www.digi.com) |
| * |
| * Copyright (C) 2004 IBM Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the |
| * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR |
| * PURPOSE. See the GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, |
| * MA 02111-1307, USA. |
| * |
| * Contact Information: |
| * Scott H Kilau <Scott_Kilau@digi.com> |
| * Wendy Xiong <wendyx@us.ibm.com> |
| * |
| * |
| ***********************************************************************/ |
| #include <linux/moduleparam.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| |
| #include "jsm.h" |
| |
| MODULE_AUTHOR("Digi International, http://www.digi.com"); |
| MODULE_DESCRIPTION("Driver for the Digi International " |
| "Neo PCI based product line"); |
| MODULE_LICENSE("GPL"); |
| MODULE_SUPPORTED_DEVICE("jsm"); |
| |
| #define JSM_DRIVER_NAME "jsm" |
| #define NR_PORTS 32 |
| #define JSM_MINOR_START 0 |
| |
| struct uart_driver jsm_uart_driver = { |
| .owner = THIS_MODULE, |
| .driver_name = JSM_DRIVER_NAME, |
| .dev_name = "ttyn", |
| .major = 0, |
| .minor = JSM_MINOR_START, |
| .nr = NR_PORTS, |
| }; |
| |
| static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, |
| pci_channel_state_t state); |
| static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev); |
| static void jsm_io_resume(struct pci_dev *pdev); |
| |
| static struct pci_error_handlers jsm_err_handler = { |
| .error_detected = jsm_io_error_detected, |
| .slot_reset = jsm_io_slot_reset, |
| .resume = jsm_io_resume, |
| }; |
| |
| int jsm_debug; |
| module_param(jsm_debug, int, 0); |
| MODULE_PARM_DESC(jsm_debug, "Driver debugging level"); |
| |
| static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| int rc = 0; |
| struct jsm_board *brd; |
| static int adapter_count = 0; |
| |
| rc = pci_enable_device(pdev); |
| if (rc) { |
| dev_err(&pdev->dev, "Device enable FAILED\n"); |
| goto out; |
| } |
| |
| rc = pci_request_regions(pdev, "jsm"); |
| if (rc) { |
| dev_err(&pdev->dev, "pci_request_region FAILED\n"); |
| goto out_disable_device; |
| } |
| |
| brd = kzalloc(sizeof(struct jsm_board), GFP_KERNEL); |
| if (!brd) { |
| dev_err(&pdev->dev, |
| "memory allocation for board structure failed\n"); |
| rc = -ENOMEM; |
| goto out_release_regions; |
| } |
| |
| /* store the info for the board we've found */ |
| brd->boardnum = adapter_count++; |
| brd->pci_dev = pdev; |
| if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM) |
| brd->maxports = 4; |
| else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8) |
| brd->maxports = 8; |
| else |
| brd->maxports = 2; |
| |
| spin_lock_init(&brd->bd_intr_lock); |
| |
| /* store which revision we have */ |
| brd->rev = pdev->revision; |
| |
| brd->irq = pdev->irq; |
| |
| jsm_printk(INIT, INFO, &brd->pci_dev, |
| "jsm_found_board - NEO adapter\n"); |
| |
| /* get the PCI Base Address Registers */ |
| brd->membase = pci_resource_start(pdev, 0); |
| brd->membase_end = pci_resource_end(pdev, 0); |
| |
| if (brd->membase & 1) |
| brd->membase &= ~3; |
| else |
| brd->membase &= ~15; |
| |
| /* Assign the board_ops struct */ |
| brd->bd_ops = &jsm_neo_ops; |
| |
| brd->bd_uart_offset = 0x200; |
| brd->bd_dividend = 921600; |
| |
| brd->re_map_membase = ioremap(brd->membase, pci_resource_len(pdev, 0)); |
| if (!brd->re_map_membase) { |
| dev_err(&pdev->dev, |
| "card has no PCI Memory resources, " |
| "failing board.\n"); |
| rc = -ENOMEM; |
| goto out_kfree_brd; |
| } |
| |
| rc = request_irq(brd->irq, brd->bd_ops->intr, |
| IRQF_SHARED, "JSM", brd); |
| if (rc) { |
| printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq); |
| goto out_iounmap; |
| } |
| |
| rc = jsm_tty_init(brd); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "Can't init tty devices (%d)\n", rc); |
| rc = -ENXIO; |
| goto out_free_irq; |
| } |
| |
| rc = jsm_uart_port_init(brd); |
| if (rc < 0) { |
| /* XXX: leaking all resources from jsm_tty_init here! */ |
| dev_err(&pdev->dev, "Can't init uart port (%d)\n", rc); |
| rc = -ENXIO; |
| goto out_free_irq; |
| } |
| |
| /* Log the information about the board */ |
| dev_info(&pdev->dev, "board %d: Digi Neo (rev %d), irq %d\n", |
| adapter_count, brd->rev, brd->irq); |
| |
| pci_set_drvdata(pdev, brd); |
| pci_save_state(pdev); |
| |
| return 0; |
| out_free_irq: |
| jsm_remove_uart_port(brd); |
| free_irq(brd->irq, brd); |
| out_iounmap: |
| iounmap(brd->re_map_membase); |
| out_kfree_brd: |
| kfree(brd); |
| out_release_regions: |
| pci_release_regions(pdev); |
| out_disable_device: |
| pci_disable_device(pdev); |
| out: |
| return rc; |
| } |
| |
| static void __devexit jsm_remove_one(struct pci_dev *pdev) |
| { |
| struct jsm_board *brd = pci_get_drvdata(pdev); |
| int i = 0; |
| |
| jsm_remove_uart_port(brd); |
| |
| free_irq(brd->irq, brd); |
| iounmap(brd->re_map_membase); |
| |
| /* Free all allocated channels structs */ |
| for (i = 0; i < brd->maxports; i++) { |
| if (brd->channels[i]) { |
| kfree(brd->channels[i]->ch_rqueue); |
| kfree(brd->channels[i]->ch_equeue); |
| kfree(brd->channels[i]); |
| } |
| } |
| |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| kfree(brd); |
| } |
| |
| static struct pci_device_id jsm_pci_tbl[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9), 0, 0, 0 }, |
| { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9PRI), 0, 0, 1 }, |
| { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 }, |
| { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 }, |
| { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 }, |
| { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 }, |
| { 0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, jsm_pci_tbl); |
| |
| static struct pci_driver jsm_driver = { |
| .name = "jsm", |
| .id_table = jsm_pci_tbl, |
| .probe = jsm_probe_one, |
| .remove = __devexit_p(jsm_remove_one), |
| .err_handler = &jsm_err_handler, |
| }; |
| |
| static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, |
| pci_channel_state_t state) |
| { |
| struct jsm_board *brd = pci_get_drvdata(pdev); |
| |
| jsm_remove_uart_port(brd); |
| |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev) |
| { |
| int rc; |
| |
| rc = pci_enable_device(pdev); |
| |
| if (rc) |
| return PCI_ERS_RESULT_DISCONNECT; |
| |
| pci_set_master(pdev); |
| |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| static void jsm_io_resume(struct pci_dev *pdev) |
| { |
| struct jsm_board *brd = pci_get_drvdata(pdev); |
| |
| pci_restore_state(pdev); |
| |
| jsm_uart_port_init(brd); |
| } |
| |
| static int __init jsm_init_module(void) |
| { |
| int rc; |
| |
| rc = uart_register_driver(&jsm_uart_driver); |
| if (!rc) { |
| rc = pci_register_driver(&jsm_driver); |
| if (rc) |
| uart_unregister_driver(&jsm_uart_driver); |
| } |
| return rc; |
| } |
| |
| static void __exit jsm_exit_module(void) |
| { |
| pci_unregister_driver(&jsm_driver); |
| uart_unregister_driver(&jsm_uart_driver); |
| } |
| |
| module_init(jsm_init_module); |
| module_exit(jsm_exit_module); |