| /** |
| * @file nmi_int.c |
| * |
| * @remark Copyright 2002 OProfile authors |
| * @remark Read the file COPYING |
| * |
| * @author John Levon <levon@movementarian.org> |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/notifier.h> |
| #include <linux/smp.h> |
| #include <linux/oprofile.h> |
| #include <linux/sysdev.h> |
| #include <linux/slab.h> |
| #include <asm/nmi.h> |
| #include <asm/msr.h> |
| #include <asm/apic.h> |
| |
| #include "op_counter.h" |
| #include "op_x86_model.h" |
| |
| static struct op_x86_model_spec const * model; |
| static struct op_msrs cpu_msrs[NR_CPUS]; |
| static unsigned long saved_lvtpc[NR_CPUS]; |
| |
| static int nmi_start(void); |
| static void nmi_stop(void); |
| |
| /* 0 == registered but off, 1 == registered and on */ |
| static int nmi_enabled = 0; |
| |
| #ifdef CONFIG_PM |
| |
| static int nmi_suspend(struct sys_device *dev, pm_message_t state) |
| { |
| if (nmi_enabled == 1) |
| nmi_stop(); |
| return 0; |
| } |
| |
| |
| static int nmi_resume(struct sys_device *dev) |
| { |
| if (nmi_enabled == 1) |
| nmi_start(); |
| return 0; |
| } |
| |
| |
| static struct sysdev_class oprofile_sysclass = { |
| set_kset_name("oprofile"), |
| .resume = nmi_resume, |
| .suspend = nmi_suspend, |
| }; |
| |
| |
| static struct sys_device device_oprofile = { |
| .id = 0, |
| .cls = &oprofile_sysclass, |
| }; |
| |
| |
| static int __init init_driverfs(void) |
| { |
| int error; |
| if (!(error = sysdev_class_register(&oprofile_sysclass))) |
| error = sysdev_register(&device_oprofile); |
| return error; |
| } |
| |
| |
| static void exit_driverfs(void) |
| { |
| sysdev_unregister(&device_oprofile); |
| sysdev_class_unregister(&oprofile_sysclass); |
| } |
| |
| #else |
| #define init_driverfs() do { } while (0) |
| #define exit_driverfs() do { } while (0) |
| #endif /* CONFIG_PM */ |
| |
| |
| static int nmi_callback(struct pt_regs * regs, int cpu) |
| { |
| return model->check_ctrs(regs, &cpu_msrs[cpu]); |
| } |
| |
| |
| static void nmi_cpu_save_registers(struct op_msrs * msrs) |
| { |
| unsigned int const nr_ctrs = model->num_counters; |
| unsigned int const nr_ctrls = model->num_controls; |
| struct op_msr * counters = msrs->counters; |
| struct op_msr * controls = msrs->controls; |
| unsigned int i; |
| |
| for (i = 0; i < nr_ctrs; ++i) { |
| rdmsr(counters[i].addr, |
| counters[i].saved.low, |
| counters[i].saved.high); |
| } |
| |
| for (i = 0; i < nr_ctrls; ++i) { |
| rdmsr(controls[i].addr, |
| controls[i].saved.low, |
| controls[i].saved.high); |
| } |
| } |
| |
| |
| static void nmi_save_registers(void * dummy) |
| { |
| int cpu = smp_processor_id(); |
| struct op_msrs * msrs = &cpu_msrs[cpu]; |
| model->fill_in_addresses(msrs); |
| nmi_cpu_save_registers(msrs); |
| } |
| |
| |
| static void free_msrs(void) |
| { |
| int i; |
| for_each_possible_cpu(i) { |
| kfree(cpu_msrs[i].counters); |
| cpu_msrs[i].counters = NULL; |
| kfree(cpu_msrs[i].controls); |
| cpu_msrs[i].controls = NULL; |
| } |
| } |
| |
| |
| static int allocate_msrs(void) |
| { |
| int success = 1; |
| size_t controls_size = sizeof(struct op_msr) * model->num_controls; |
| size_t counters_size = sizeof(struct op_msr) * model->num_counters; |
| |
| int i; |
| for_each_online_cpu(i) { |
| cpu_msrs[i].counters = kmalloc(counters_size, GFP_KERNEL); |
| if (!cpu_msrs[i].counters) { |
| success = 0; |
| break; |
| } |
| cpu_msrs[i].controls = kmalloc(controls_size, GFP_KERNEL); |
| if (!cpu_msrs[i].controls) { |
| success = 0; |
| break; |
| } |
| } |
| |
| if (!success) |
| free_msrs(); |
| |
| return success; |
| } |
| |
| |
| static void nmi_cpu_setup(void * dummy) |
| { |
| int cpu = smp_processor_id(); |
| struct op_msrs * msrs = &cpu_msrs[cpu]; |
| spin_lock(&oprofilefs_lock); |
| model->setup_ctrs(msrs); |
| spin_unlock(&oprofilefs_lock); |
| saved_lvtpc[cpu] = apic_read(APIC_LVTPC); |
| apic_write(APIC_LVTPC, APIC_DM_NMI); |
| } |
| |
| |
| static int nmi_setup(void) |
| { |
| if (!allocate_msrs()) |
| return -ENOMEM; |
| |
| /* We walk a thin line between law and rape here. |
| * We need to be careful to install our NMI handler |
| * without actually triggering any NMIs as this will |
| * break the core code horrifically. |
| */ |
| if (reserve_lapic_nmi() < 0) { |
| free_msrs(); |
| return -EBUSY; |
| } |
| /* We need to serialize save and setup for HT because the subset |
| * of msrs are distinct for save and setup operations |
| */ |
| on_each_cpu(nmi_save_registers, NULL, 0, 1); |
| on_each_cpu(nmi_cpu_setup, NULL, 0, 1); |
| set_nmi_callback(nmi_callback); |
| nmi_enabled = 1; |
| return 0; |
| } |
| |
| |
| static void nmi_restore_registers(struct op_msrs * msrs) |
| { |
| unsigned int const nr_ctrs = model->num_counters; |
| unsigned int const nr_ctrls = model->num_controls; |
| struct op_msr * counters = msrs->counters; |
| struct op_msr * controls = msrs->controls; |
| unsigned int i; |
| |
| for (i = 0; i < nr_ctrls; ++i) { |
| wrmsr(controls[i].addr, |
| controls[i].saved.low, |
| controls[i].saved.high); |
| } |
| |
| for (i = 0; i < nr_ctrs; ++i) { |
| wrmsr(counters[i].addr, |
| counters[i].saved.low, |
| counters[i].saved.high); |
| } |
| } |
| |
| |
| static void nmi_cpu_shutdown(void * dummy) |
| { |
| unsigned int v; |
| int cpu = smp_processor_id(); |
| struct op_msrs * msrs = &cpu_msrs[cpu]; |
| |
| /* restoring APIC_LVTPC can trigger an apic error because the delivery |
| * mode and vector nr combination can be illegal. That's by design: on |
| * power on apic lvt contain a zero vector nr which are legal only for |
| * NMI delivery mode. So inhibit apic err before restoring lvtpc |
| */ |
| v = apic_read(APIC_LVTERR); |
| apic_write(APIC_LVTERR, v | APIC_LVT_MASKED); |
| apic_write(APIC_LVTPC, saved_lvtpc[cpu]); |
| apic_write(APIC_LVTERR, v); |
| nmi_restore_registers(msrs); |
| } |
| |
| |
| static void nmi_shutdown(void) |
| { |
| nmi_enabled = 0; |
| on_each_cpu(nmi_cpu_shutdown, NULL, 0, 1); |
| unset_nmi_callback(); |
| release_lapic_nmi(); |
| free_msrs(); |
| } |
| |
| |
| static void nmi_cpu_start(void * dummy) |
| { |
| struct op_msrs const * msrs = &cpu_msrs[smp_processor_id()]; |
| model->start(msrs); |
| } |
| |
| |
| static int nmi_start(void) |
| { |
| on_each_cpu(nmi_cpu_start, NULL, 0, 1); |
| return 0; |
| } |
| |
| |
| static void nmi_cpu_stop(void * dummy) |
| { |
| struct op_msrs const * msrs = &cpu_msrs[smp_processor_id()]; |
| model->stop(msrs); |
| } |
| |
| |
| static void nmi_stop(void) |
| { |
| on_each_cpu(nmi_cpu_stop, NULL, 0, 1); |
| } |
| |
| |
| struct op_counter_config counter_config[OP_MAX_COUNTER]; |
| |
| static int nmi_create_files(struct super_block * sb, struct dentry * root) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < model->num_counters; ++i) { |
| struct dentry * dir; |
| char buf[4]; |
| |
| snprintf(buf, sizeof(buf), "%d", i); |
| dir = oprofilefs_mkdir(sb, root, buf); |
| oprofilefs_create_ulong(sb, dir, "enabled", &counter_config[i].enabled); |
| oprofilefs_create_ulong(sb, dir, "event", &counter_config[i].event); |
| oprofilefs_create_ulong(sb, dir, "count", &counter_config[i].count); |
| oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask); |
| oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel); |
| oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user); |
| } |
| |
| return 0; |
| } |
| |
| |
| static int __init p4_init(char ** cpu_type) |
| { |
| __u8 cpu_model = boot_cpu_data.x86_model; |
| |
| if (cpu_model > 4) |
| return 0; |
| |
| #ifndef CONFIG_SMP |
| *cpu_type = "i386/p4"; |
| model = &op_p4_spec; |
| return 1; |
| #else |
| switch (smp_num_siblings) { |
| case 1: |
| *cpu_type = "i386/p4"; |
| model = &op_p4_spec; |
| return 1; |
| |
| case 2: |
| *cpu_type = "i386/p4-ht"; |
| model = &op_p4_ht2_spec; |
| return 1; |
| } |
| #endif |
| |
| printk(KERN_INFO "oprofile: P4 HyperThreading detected with > 2 threads\n"); |
| printk(KERN_INFO "oprofile: Reverting to timer mode.\n"); |
| return 0; |
| } |
| |
| |
| static int __init ppro_init(char ** cpu_type) |
| { |
| __u8 cpu_model = boot_cpu_data.x86_model; |
| |
| if (cpu_model == 14) |
| *cpu_type = "i386/core"; |
| else if (cpu_model > 0xd) |
| return 0; |
| else if (cpu_model == 9) { |
| *cpu_type = "i386/p6_mobile"; |
| } else if (cpu_model > 5) { |
| *cpu_type = "i386/piii"; |
| } else if (cpu_model > 2) { |
| *cpu_type = "i386/pii"; |
| } else { |
| *cpu_type = "i386/ppro"; |
| } |
| |
| model = &op_ppro_spec; |
| return 1; |
| } |
| |
| /* in order to get driverfs right */ |
| static int using_nmi; |
| |
| int __init op_nmi_init(struct oprofile_operations *ops) |
| { |
| __u8 vendor = boot_cpu_data.x86_vendor; |
| __u8 family = boot_cpu_data.x86; |
| char *cpu_type; |
| |
| if (!cpu_has_apic) |
| return -ENODEV; |
| |
| switch (vendor) { |
| case X86_VENDOR_AMD: |
| /* Needs to be at least an Athlon (or hammer in 32bit mode) */ |
| |
| switch (family) { |
| default: |
| return -ENODEV; |
| case 6: |
| model = &op_athlon_spec; |
| cpu_type = "i386/athlon"; |
| break; |
| case 0xf: |
| model = &op_athlon_spec; |
| /* Actually it could be i386/hammer too, but give |
| user space an consistent name. */ |
| cpu_type = "x86-64/hammer"; |
| break; |
| } |
| break; |
| |
| case X86_VENDOR_INTEL: |
| switch (family) { |
| /* Pentium IV */ |
| case 0xf: |
| if (!p4_init(&cpu_type)) |
| return -ENODEV; |
| break; |
| |
| /* A P6-class processor */ |
| case 6: |
| if (!ppro_init(&cpu_type)) |
| return -ENODEV; |
| break; |
| |
| default: |
| return -ENODEV; |
| } |
| break; |
| |
| default: |
| return -ENODEV; |
| } |
| |
| init_driverfs(); |
| using_nmi = 1; |
| ops->create_files = nmi_create_files; |
| ops->setup = nmi_setup; |
| ops->shutdown = nmi_shutdown; |
| ops->start = nmi_start; |
| ops->stop = nmi_stop; |
| ops->cpu_type = cpu_type; |
| printk(KERN_INFO "oprofile: using NMI interrupt.\n"); |
| return 0; |
| } |
| |
| |
| void op_nmi_exit(void) |
| { |
| if (using_nmi) |
| exit_driverfs(); |
| } |