| /* |
| * Ftrace header. For implementation details beyond the random comments |
| * scattered below, see: Documentation/trace/ftrace-design.txt |
| */ |
| |
| #ifndef _LINUX_FTRACE_H |
| #define _LINUX_FTRACE_H |
| |
| #include <linux/trace_clock.h> |
| #include <linux/kallsyms.h> |
| #include <linux/linkage.h> |
| #include <linux/bitops.h> |
| #include <linux/ptrace.h> |
| #include <linux/ktime.h> |
| #include <linux/sched.h> |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/fs.h> |
| |
| #include <asm/ftrace.h> |
| |
| /* |
| * If the arch supports passing the variable contents of |
| * function_trace_op as the third parameter back from the |
| * mcount call, then the arch should define this as 1. |
| */ |
| #ifndef ARCH_SUPPORTS_FTRACE_OPS |
| #define ARCH_SUPPORTS_FTRACE_OPS 0 |
| #endif |
| |
| /* |
| * If the arch's mcount caller does not support all of ftrace's |
| * features, then it must call an indirect function that |
| * does. Or at least does enough to prevent any unwelcomed side effects. |
| */ |
| #if !defined(CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST) || \ |
| !ARCH_SUPPORTS_FTRACE_OPS |
| # define FTRACE_FORCE_LIST_FUNC 1 |
| #else |
| # define FTRACE_FORCE_LIST_FUNC 0 |
| #endif |
| |
| |
| struct module; |
| struct ftrace_hash; |
| |
| #ifdef CONFIG_FUNCTION_TRACER |
| |
| extern int ftrace_enabled; |
| extern int |
| ftrace_enable_sysctl(struct ctl_table *table, int write, |
| void __user *buffer, size_t *lenp, |
| loff_t *ppos); |
| |
| struct ftrace_ops; |
| |
| typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip, |
| struct ftrace_ops *op, struct pt_regs *regs); |
| |
| /* |
| * FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are |
| * set in the flags member. |
| * |
| * ENABLED - set/unset when ftrace_ops is registered/unregistered |
| * GLOBAL - set manualy by ftrace_ops user to denote the ftrace_ops |
| * is part of the global tracers sharing the same filter |
| * via set_ftrace_* debugfs files. |
| * DYNAMIC - set when ftrace_ops is registered to denote dynamically |
| * allocated ftrace_ops which need special care |
| * CONTROL - set manualy by ftrace_ops user to denote the ftrace_ops |
| * could be controled by following calls: |
| * ftrace_function_local_enable |
| * ftrace_function_local_disable |
| * SAVE_REGS - The ftrace_ops wants regs saved at each function called |
| * and passed to the callback. If this flag is set, but the |
| * architecture does not support passing regs |
| * (CONFIG_DYNAMIC_FTRACE_WITH_REGS is not defined), then the |
| * ftrace_ops will fail to register, unless the next flag |
| * is set. |
| * SAVE_REGS_IF_SUPPORTED - This is the same as SAVE_REGS, but if the |
| * handler can handle an arch that does not save regs |
| * (the handler tests if regs == NULL), then it can set |
| * this flag instead. It will not fail registering the ftrace_ops |
| * but, the regs field will be NULL if the arch does not support |
| * passing regs to the handler. |
| * Note, if this flag is set, the SAVE_REGS flag will automatically |
| * get set upon registering the ftrace_ops, if the arch supports it. |
| * RECURSION_SAFE - The ftrace_ops can set this to tell the ftrace infrastructure |
| * that the call back has its own recursion protection. If it does |
| * not set this, then the ftrace infrastructure will add recursion |
| * protection for the caller. |
| * STUB - The ftrace_ops is just a place holder. |
| * INITIALIZED - The ftrace_ops has already been initialized (first use time |
| * register_ftrace_function() is called, it will initialized the ops) |
| * DELETED - The ops are being deleted, do not let them be registered again. |
| */ |
| enum { |
| FTRACE_OPS_FL_ENABLED = 1 << 0, |
| FTRACE_OPS_FL_GLOBAL = 1 << 1, |
| FTRACE_OPS_FL_DYNAMIC = 1 << 2, |
| FTRACE_OPS_FL_CONTROL = 1 << 3, |
| FTRACE_OPS_FL_SAVE_REGS = 1 << 4, |
| FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED = 1 << 5, |
| FTRACE_OPS_FL_RECURSION_SAFE = 1 << 6, |
| FTRACE_OPS_FL_STUB = 1 << 7, |
| FTRACE_OPS_FL_INITIALIZED = 1 << 8, |
| FTRACE_OPS_FL_DELETED = 1 << 9, |
| }; |
| |
| /* |
| * Note, ftrace_ops can be referenced outside of RCU protection. |
| * (Although, for perf, the control ops prevent that). If ftrace_ops is |
| * allocated and not part of kernel core data, the unregistering of it will |
| * perform a scheduling on all CPUs to make sure that there are no more users. |
| * Depending on the load of the system that may take a bit of time. |
| * |
| * Any private data added must also take care not to be freed and if private |
| * data is added to a ftrace_ops that is in core code, the user of the |
| * ftrace_ops must perform a schedule_on_each_cpu() before freeing it. |
| */ |
| struct ftrace_ops { |
| ftrace_func_t func; |
| struct ftrace_ops *next; |
| unsigned long flags; |
| int __percpu *disabled; |
| void *private; |
| #ifdef CONFIG_DYNAMIC_FTRACE |
| struct ftrace_hash *notrace_hash; |
| struct ftrace_hash *filter_hash; |
| struct mutex regex_lock; |
| #endif |
| }; |
| |
| extern int function_trace_stop; |
| |
| /* |
| * Type of the current tracing. |
| */ |
| enum ftrace_tracing_type_t { |
| FTRACE_TYPE_ENTER = 0, /* Hook the call of the function */ |
| FTRACE_TYPE_RETURN, /* Hook the return of the function */ |
| }; |
| |
| /* Current tracing type, default is FTRACE_TYPE_ENTER */ |
| extern enum ftrace_tracing_type_t ftrace_tracing_type; |
| |
| /** |
| * ftrace_stop - stop function tracer. |
| * |
| * A quick way to stop the function tracer. Note this an on off switch, |
| * it is not something that is recursive like preempt_disable. |
| * This does not disable the calling of mcount, it only stops the |
| * calling of functions from mcount. |
| */ |
| static inline void ftrace_stop(void) |
| { |
| function_trace_stop = 1; |
| } |
| |
| /** |
| * ftrace_start - start the function tracer. |
| * |
| * This function is the inverse of ftrace_stop. This does not enable |
| * the function tracing if the function tracer is disabled. This only |
| * sets the function tracer flag to continue calling the functions |
| * from mcount. |
| */ |
| static inline void ftrace_start(void) |
| { |
| function_trace_stop = 0; |
| } |
| |
| /* |
| * The ftrace_ops must be a static and should also |
| * be read_mostly. These functions do modify read_mostly variables |
| * so use them sparely. Never free an ftrace_op or modify the |
| * next pointer after it has been registered. Even after unregistering |
| * it, the next pointer may still be used internally. |
| */ |
| int register_ftrace_function(struct ftrace_ops *ops); |
| int unregister_ftrace_function(struct ftrace_ops *ops); |
| void clear_ftrace_function(void); |
| |
| /** |
| * ftrace_function_local_enable - enable controlled ftrace_ops on current cpu |
| * |
| * This function enables tracing on current cpu by decreasing |
| * the per cpu control variable. |
| * It must be called with preemption disabled and only on ftrace_ops |
| * registered with FTRACE_OPS_FL_CONTROL. If called without preemption |
| * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled. |
| */ |
| static inline void ftrace_function_local_enable(struct ftrace_ops *ops) |
| { |
| if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL))) |
| return; |
| |
| (*this_cpu_ptr(ops->disabled))--; |
| } |
| |
| /** |
| * ftrace_function_local_disable - enable controlled ftrace_ops on current cpu |
| * |
| * This function enables tracing on current cpu by decreasing |
| * the per cpu control variable. |
| * It must be called with preemption disabled and only on ftrace_ops |
| * registered with FTRACE_OPS_FL_CONTROL. If called without preemption |
| * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled. |
| */ |
| static inline void ftrace_function_local_disable(struct ftrace_ops *ops) |
| { |
| if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL))) |
| return; |
| |
| (*this_cpu_ptr(ops->disabled))++; |
| } |
| |
| /** |
| * ftrace_function_local_disabled - returns ftrace_ops disabled value |
| * on current cpu |
| * |
| * This function returns value of ftrace_ops::disabled on current cpu. |
| * It must be called with preemption disabled and only on ftrace_ops |
| * registered with FTRACE_OPS_FL_CONTROL. If called without preemption |
| * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled. |
| */ |
| static inline int ftrace_function_local_disabled(struct ftrace_ops *ops) |
| { |
| WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)); |
| return *this_cpu_ptr(ops->disabled); |
| } |
| |
| extern void ftrace_stub(unsigned long a0, unsigned long a1, |
| struct ftrace_ops *op, struct pt_regs *regs); |
| |
| #else /* !CONFIG_FUNCTION_TRACER */ |
| /* |
| * (un)register_ftrace_function must be a macro since the ops parameter |
| * must not be evaluated. |
| */ |
| #define register_ftrace_function(ops) ({ 0; }) |
| #define unregister_ftrace_function(ops) ({ 0; }) |
| static inline int ftrace_nr_registered_ops(void) |
| { |
| return 0; |
| } |
| static inline void clear_ftrace_function(void) { } |
| static inline void ftrace_kill(void) { } |
| static inline void ftrace_stop(void) { } |
| static inline void ftrace_start(void) { } |
| #endif /* CONFIG_FUNCTION_TRACER */ |
| |
| #ifdef CONFIG_STACK_TRACER |
| extern int stack_tracer_enabled; |
| int |
| stack_trace_sysctl(struct ctl_table *table, int write, |
| void __user *buffer, size_t *lenp, |
| loff_t *ppos); |
| #endif |
| |
| struct ftrace_func_command { |
| struct list_head list; |
| char *name; |
| int (*func)(struct ftrace_hash *hash, |
| char *func, char *cmd, |
| char *params, int enable); |
| }; |
| |
| #ifdef CONFIG_DYNAMIC_FTRACE |
| |
| int ftrace_arch_code_modify_prepare(void); |
| int ftrace_arch_code_modify_post_process(void); |
| |
| void ftrace_bug(int err, unsigned long ip); |
| |
| struct seq_file; |
| |
| struct ftrace_probe_ops { |
| void (*func)(unsigned long ip, |
| unsigned long parent_ip, |
| void **data); |
| int (*init)(struct ftrace_probe_ops *ops, |
| unsigned long ip, void **data); |
| void (*free)(struct ftrace_probe_ops *ops, |
| unsigned long ip, void **data); |
| int (*print)(struct seq_file *m, |
| unsigned long ip, |
| struct ftrace_probe_ops *ops, |
| void *data); |
| }; |
| |
| extern int |
| register_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops, |
| void *data); |
| extern void |
| unregister_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops, |
| void *data); |
| extern void |
| unregister_ftrace_function_probe_func(char *glob, struct ftrace_probe_ops *ops); |
| extern void unregister_ftrace_function_probe_all(char *glob); |
| |
| extern int ftrace_text_reserved(const void *start, const void *end); |
| |
| extern int ftrace_nr_registered_ops(void); |
| |
| /* |
| * The dyn_ftrace record's flags field is split into two parts. |
| * the first part which is '0-FTRACE_REF_MAX' is a counter of |
| * the number of callbacks that have registered the function that |
| * the dyn_ftrace descriptor represents. |
| * |
| * The second part is a mask: |
| * ENABLED - the function is being traced |
| * REGS - the record wants the function to save regs |
| * REGS_EN - the function is set up to save regs. |
| * |
| * When a new ftrace_ops is registered and wants a function to save |
| * pt_regs, the rec->flag REGS is set. When the function has been |
| * set up to save regs, the REG_EN flag is set. Once a function |
| * starts saving regs it will do so until all ftrace_ops are removed |
| * from tracing that function. |
| */ |
| enum { |
| FTRACE_FL_ENABLED = (1UL << 29), |
| FTRACE_FL_REGS = (1UL << 30), |
| FTRACE_FL_REGS_EN = (1UL << 31) |
| }; |
| |
| #define FTRACE_FL_MASK (0x7UL << 29) |
| #define FTRACE_REF_MAX ((1UL << 29) - 1) |
| |
| struct dyn_ftrace { |
| unsigned long ip; /* address of mcount call-site */ |
| unsigned long flags; |
| struct dyn_arch_ftrace arch; |
| }; |
| |
| int ftrace_force_update(void); |
| int ftrace_set_filter_ip(struct ftrace_ops *ops, unsigned long ip, |
| int remove, int reset); |
| int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf, |
| int len, int reset); |
| int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf, |
| int len, int reset); |
| void ftrace_set_global_filter(unsigned char *buf, int len, int reset); |
| void ftrace_set_global_notrace(unsigned char *buf, int len, int reset); |
| void ftrace_free_filter(struct ftrace_ops *ops); |
| |
| int register_ftrace_command(struct ftrace_func_command *cmd); |
| int unregister_ftrace_command(struct ftrace_func_command *cmd); |
| |
| enum { |
| FTRACE_UPDATE_CALLS = (1 << 0), |
| FTRACE_DISABLE_CALLS = (1 << 1), |
| FTRACE_UPDATE_TRACE_FUNC = (1 << 2), |
| FTRACE_START_FUNC_RET = (1 << 3), |
| FTRACE_STOP_FUNC_RET = (1 << 4), |
| }; |
| |
| /* |
| * The FTRACE_UPDATE_* enum is used to pass information back |
| * from the ftrace_update_record() and ftrace_test_record() |
| * functions. These are called by the code update routines |
| * to find out what is to be done for a given function. |
| * |
| * IGNORE - The function is already what we want it to be |
| * MAKE_CALL - Start tracing the function |
| * MODIFY_CALL - Stop saving regs for the function |
| * MODIFY_CALL_REGS - Start saving regs for the function |
| * MAKE_NOP - Stop tracing the function |
| */ |
| enum { |
| FTRACE_UPDATE_IGNORE, |
| FTRACE_UPDATE_MAKE_CALL, |
| FTRACE_UPDATE_MODIFY_CALL, |
| FTRACE_UPDATE_MODIFY_CALL_REGS, |
| FTRACE_UPDATE_MAKE_NOP, |
| }; |
| |
| enum { |
| FTRACE_ITER_FILTER = (1 << 0), |
| FTRACE_ITER_NOTRACE = (1 << 1), |
| FTRACE_ITER_PRINTALL = (1 << 2), |
| FTRACE_ITER_DO_HASH = (1 << 3), |
| FTRACE_ITER_HASH = (1 << 4), |
| FTRACE_ITER_ENABLED = (1 << 5), |
| }; |
| |
| void arch_ftrace_update_code(int command); |
| |
| struct ftrace_rec_iter; |
| |
| struct ftrace_rec_iter *ftrace_rec_iter_start(void); |
| struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter); |
| struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter); |
| |
| #define for_ftrace_rec_iter(iter) \ |
| for (iter = ftrace_rec_iter_start(); \ |
| iter; \ |
| iter = ftrace_rec_iter_next(iter)) |
| |
| |
| int ftrace_update_record(struct dyn_ftrace *rec, int enable); |
| int ftrace_test_record(struct dyn_ftrace *rec, int enable); |
| void ftrace_run_stop_machine(int command); |
| unsigned long ftrace_location(unsigned long ip); |
| |
| extern ftrace_func_t ftrace_trace_function; |
| |
| int ftrace_regex_open(struct ftrace_ops *ops, int flag, |
| struct inode *inode, struct file *file); |
| ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf, |
| size_t cnt, loff_t *ppos); |
| ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf, |
| size_t cnt, loff_t *ppos); |
| int ftrace_regex_release(struct inode *inode, struct file *file); |
| |
| void __init |
| ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable); |
| |
| /* defined in arch */ |
| extern int ftrace_ip_converted(unsigned long ip); |
| extern int ftrace_dyn_arch_init(void); |
| extern void ftrace_replace_code(int enable); |
| extern int ftrace_update_ftrace_func(ftrace_func_t func); |
| extern void ftrace_caller(void); |
| extern void ftrace_regs_caller(void); |
| extern void ftrace_call(void); |
| extern void ftrace_regs_call(void); |
| extern void mcount_call(void); |
| |
| void ftrace_modify_all_code(int command); |
| |
| #ifndef FTRACE_ADDR |
| #define FTRACE_ADDR ((unsigned long)ftrace_caller) |
| #endif |
| |
| #ifndef FTRACE_REGS_ADDR |
| #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS |
| # define FTRACE_REGS_ADDR ((unsigned long)ftrace_regs_caller) |
| #else |
| # define FTRACE_REGS_ADDR FTRACE_ADDR |
| #endif |
| #endif |
| |
| #ifdef CONFIG_FUNCTION_GRAPH_TRACER |
| extern void ftrace_graph_caller(void); |
| extern int ftrace_enable_ftrace_graph_caller(void); |
| extern int ftrace_disable_ftrace_graph_caller(void); |
| #else |
| static inline int ftrace_enable_ftrace_graph_caller(void) { return 0; } |
| static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; } |
| #endif |
| |
| /** |
| * ftrace_make_nop - convert code into nop |
| * @mod: module structure if called by module load initialization |
| * @rec: the mcount call site record |
| * @addr: the address that the call site should be calling |
| * |
| * This is a very sensitive operation and great care needs |
| * to be taken by the arch. The operation should carefully |
| * read the location, check to see if what is read is indeed |
| * what we expect it to be, and then on success of the compare, |
| * it should write to the location. |
| * |
| * The code segment at @rec->ip should be a caller to @addr |
| * |
| * Return must be: |
| * 0 on success |
| * -EFAULT on error reading the location |
| * -EINVAL on a failed compare of the contents |
| * -EPERM on error writing to the location |
| * Any other value will be considered a failure. |
| */ |
| extern int ftrace_make_nop(struct module *mod, |
| struct dyn_ftrace *rec, unsigned long addr); |
| |
| /** |
| * ftrace_make_call - convert a nop call site into a call to addr |
| * @rec: the mcount call site record |
| * @addr: the address that the call site should call |
| * |
| * This is a very sensitive operation and great care needs |
| * to be taken by the arch. The operation should carefully |
| * read the location, check to see if what is read is indeed |
| * what we expect it to be, and then on success of the compare, |
| * it should write to the location. |
| * |
| * The code segment at @rec->ip should be a nop |
| * |
| * Return must be: |
| * 0 on success |
| * -EFAULT on error reading the location |
| * -EINVAL on a failed compare of the contents |
| * -EPERM on error writing to the location |
| * Any other value will be considered a failure. |
| */ |
| extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr); |
| |
| #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS |
| /** |
| * ftrace_modify_call - convert from one addr to another (no nop) |
| * @rec: the mcount call site record |
| * @old_addr: the address expected to be currently called to |
| * @addr: the address to change to |
| * |
| * This is a very sensitive operation and great care needs |
| * to be taken by the arch. The operation should carefully |
| * read the location, check to see if what is read is indeed |
| * what we expect it to be, and then on success of the compare, |
| * it should write to the location. |
| * |
| * The code segment at @rec->ip should be a caller to @old_addr |
| * |
| * Return must be: |
| * 0 on success |
| * -EFAULT on error reading the location |
| * -EINVAL on a failed compare of the contents |
| * -EPERM on error writing to the location |
| * Any other value will be considered a failure. |
| */ |
| extern int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr, |
| unsigned long addr); |
| #else |
| /* Should never be called */ |
| static inline int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr, |
| unsigned long addr) |
| { |
| return -EINVAL; |
| } |
| #endif |
| |
| /* May be defined in arch */ |
| extern int ftrace_arch_read_dyn_info(char *buf, int size); |
| |
| extern int skip_trace(unsigned long ip); |
| extern void ftrace_module_init(struct module *mod); |
| |
| extern void ftrace_disable_daemon(void); |
| extern void ftrace_enable_daemon(void); |
| #else /* CONFIG_DYNAMIC_FTRACE */ |
| static inline int skip_trace(unsigned long ip) { return 0; } |
| static inline int ftrace_force_update(void) { return 0; } |
| static inline void ftrace_disable_daemon(void) { } |
| static inline void ftrace_enable_daemon(void) { } |
| static inline void ftrace_release_mod(struct module *mod) {} |
| static inline void ftrace_module_init(struct module *mod) {} |
| static inline __init int register_ftrace_command(struct ftrace_func_command *cmd) |
| { |
| return -EINVAL; |
| } |
| static inline __init int unregister_ftrace_command(char *cmd_name) |
| { |
| return -EINVAL; |
| } |
| static inline int ftrace_text_reserved(const void *start, const void *end) |
| { |
| return 0; |
| } |
| static inline unsigned long ftrace_location(unsigned long ip) |
| { |
| return 0; |
| } |
| |
| /* |
| * Again users of functions that have ftrace_ops may not |
| * have them defined when ftrace is not enabled, but these |
| * functions may still be called. Use a macro instead of inline. |
| */ |
| #define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; }) |
| #define ftrace_set_early_filter(ops, buf, enable) do { } while (0) |
| #define ftrace_set_filter_ip(ops, ip, remove, reset) ({ -ENODEV; }) |
| #define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; }) |
| #define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; }) |
| #define ftrace_free_filter(ops) do { } while (0) |
| |
| static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf, |
| size_t cnt, loff_t *ppos) { return -ENODEV; } |
| static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf, |
| size_t cnt, loff_t *ppos) { return -ENODEV; } |
| static inline int |
| ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; } |
| #endif /* CONFIG_DYNAMIC_FTRACE */ |
| |
| /* totally disable ftrace - can not re-enable after this */ |
| void ftrace_kill(void); |
| |
| static inline void tracer_disable(void) |
| { |
| #ifdef CONFIG_FUNCTION_TRACER |
| ftrace_enabled = 0; |
| #endif |
| } |
| |
| /* |
| * Ftrace disable/restore without lock. Some synchronization mechanism |
| * must be used to prevent ftrace_enabled to be changed between |
| * disable/restore. |
| */ |
| static inline int __ftrace_enabled_save(void) |
| { |
| #ifdef CONFIG_FUNCTION_TRACER |
| int saved_ftrace_enabled = ftrace_enabled; |
| ftrace_enabled = 0; |
| return saved_ftrace_enabled; |
| #else |
| return 0; |
| #endif |
| } |
| |
| static inline void __ftrace_enabled_restore(int enabled) |
| { |
| #ifdef CONFIG_FUNCTION_TRACER |
| ftrace_enabled = enabled; |
| #endif |
| } |
| |
| #ifndef HAVE_ARCH_CALLER_ADDR |
| # ifdef CONFIG_FRAME_POINTER |
| # define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) |
| # define CALLER_ADDR1 ((unsigned long)__builtin_return_address(1)) |
| # define CALLER_ADDR2 ((unsigned long)__builtin_return_address(2)) |
| # define CALLER_ADDR3 ((unsigned long)__builtin_return_address(3)) |
| # define CALLER_ADDR4 ((unsigned long)__builtin_return_address(4)) |
| # define CALLER_ADDR5 ((unsigned long)__builtin_return_address(5)) |
| # define CALLER_ADDR6 ((unsigned long)__builtin_return_address(6)) |
| # else |
| # define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) |
| # define CALLER_ADDR1 0UL |
| # define CALLER_ADDR2 0UL |
| # define CALLER_ADDR3 0UL |
| # define CALLER_ADDR4 0UL |
| # define CALLER_ADDR5 0UL |
| # define CALLER_ADDR6 0UL |
| # endif |
| #endif /* ifndef HAVE_ARCH_CALLER_ADDR */ |
| |
| #ifdef CONFIG_IRQSOFF_TRACER |
| extern void time_hardirqs_on(unsigned long a0, unsigned long a1); |
| extern void time_hardirqs_off(unsigned long a0, unsigned long a1); |
| #else |
| static inline void time_hardirqs_on(unsigned long a0, unsigned long a1) { } |
| static inline void time_hardirqs_off(unsigned long a0, unsigned long a1) { } |
| #endif |
| |
| #ifdef CONFIG_PREEMPT_TRACER |
| extern void trace_preempt_on(unsigned long a0, unsigned long a1); |
| extern void trace_preempt_off(unsigned long a0, unsigned long a1); |
| #else |
| /* |
| * Use defines instead of static inlines because some arches will make code out |
| * of the CALLER_ADDR, when we really want these to be a real nop. |
| */ |
| # define trace_preempt_on(a0, a1) do { } while (0) |
| # define trace_preempt_off(a0, a1) do { } while (0) |
| #endif |
| |
| #ifdef CONFIG_FTRACE_MCOUNT_RECORD |
| extern void ftrace_init(void); |
| #else |
| static inline void ftrace_init(void) { } |
| #endif |
| |
| /* |
| * Structure that defines an entry function trace. |
| */ |
| struct ftrace_graph_ent { |
| unsigned long func; /* Current function */ |
| int depth; |
| }; |
| |
| /* |
| * Structure that defines a return function trace. |
| */ |
| struct ftrace_graph_ret { |
| unsigned long func; /* Current function */ |
| unsigned long long calltime; |
| unsigned long long rettime; |
| /* Number of functions that overran the depth limit for current task */ |
| unsigned long overrun; |
| int depth; |
| }; |
| |
| /* Type of the callback handlers for tracing function graph*/ |
| typedef void (*trace_func_graph_ret_t)(struct ftrace_graph_ret *); /* return */ |
| typedef int (*trace_func_graph_ent_t)(struct ftrace_graph_ent *); /* entry */ |
| |
| #ifdef CONFIG_FUNCTION_GRAPH_TRACER |
| |
| /* for init task */ |
| #define INIT_FTRACE_GRAPH .ret_stack = NULL, |
| |
| /* |
| * Stack of return addresses for functions |
| * of a thread. |
| * Used in struct thread_info |
| */ |
| struct ftrace_ret_stack { |
| unsigned long ret; |
| unsigned long func; |
| unsigned long long calltime; |
| unsigned long long subtime; |
| unsigned long fp; |
| }; |
| |
| /* |
| * Primary handler of a function return. |
| * It relays on ftrace_return_to_handler. |
| * Defined in entry_32/64.S |
| */ |
| extern void return_to_handler(void); |
| |
| extern int |
| ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth, |
| unsigned long frame_pointer); |
| |
| /* |
| * Sometimes we don't want to trace a function with the function |
| * graph tracer but we want them to keep traced by the usual function |
| * tracer if the function graph tracer is not configured. |
| */ |
| #define __notrace_funcgraph notrace |
| |
| /* |
| * We want to which function is an entrypoint of a hardirq. |
| * That will help us to put a signal on output. |
| */ |
| #define __irq_entry __attribute__((__section__(".irqentry.text"))) |
| |
| /* Limits of hardirq entrypoints */ |
| extern char __irqentry_text_start[]; |
| extern char __irqentry_text_end[]; |
| |
| #define FTRACE_NOTRACE_DEPTH 65536 |
| #define FTRACE_RETFUNC_DEPTH 50 |
| #define FTRACE_RETSTACK_ALLOC_SIZE 32 |
| extern int register_ftrace_graph(trace_func_graph_ret_t retfunc, |
| trace_func_graph_ent_t entryfunc); |
| |
| extern void ftrace_graph_stop(void); |
| |
| /* The current handlers in use */ |
| extern trace_func_graph_ret_t ftrace_graph_return; |
| extern trace_func_graph_ent_t ftrace_graph_entry; |
| |
| extern void unregister_ftrace_graph(void); |
| |
| extern void ftrace_graph_init_task(struct task_struct *t); |
| extern void ftrace_graph_exit_task(struct task_struct *t); |
| extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu); |
| |
| static inline int task_curr_ret_stack(struct task_struct *t) |
| { |
| return t->curr_ret_stack; |
| } |
| |
| static inline void pause_graph_tracing(void) |
| { |
| atomic_inc(¤t->tracing_graph_pause); |
| } |
| |
| static inline void unpause_graph_tracing(void) |
| { |
| atomic_dec(¤t->tracing_graph_pause); |
| } |
| #else /* !CONFIG_FUNCTION_GRAPH_TRACER */ |
| |
| #define __notrace_funcgraph |
| #define __irq_entry |
| #define INIT_FTRACE_GRAPH |
| |
| static inline void ftrace_graph_init_task(struct task_struct *t) { } |
| static inline void ftrace_graph_exit_task(struct task_struct *t) { } |
| static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { } |
| |
| static inline int register_ftrace_graph(trace_func_graph_ret_t retfunc, |
| trace_func_graph_ent_t entryfunc) |
| { |
| return -1; |
| } |
| static inline void unregister_ftrace_graph(void) { } |
| |
| static inline int task_curr_ret_stack(struct task_struct *tsk) |
| { |
| return -1; |
| } |
| |
| static inline void pause_graph_tracing(void) { } |
| static inline void unpause_graph_tracing(void) { } |
| #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ |
| |
| #ifdef CONFIG_TRACING |
| |
| /* flags for current->trace */ |
| enum { |
| TSK_TRACE_FL_TRACE_BIT = 0, |
| TSK_TRACE_FL_GRAPH_BIT = 1, |
| }; |
| enum { |
| TSK_TRACE_FL_TRACE = 1 << TSK_TRACE_FL_TRACE_BIT, |
| TSK_TRACE_FL_GRAPH = 1 << TSK_TRACE_FL_GRAPH_BIT, |
| }; |
| |
| static inline void set_tsk_trace_trace(struct task_struct *tsk) |
| { |
| set_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace); |
| } |
| |
| static inline void clear_tsk_trace_trace(struct task_struct *tsk) |
| { |
| clear_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace); |
| } |
| |
| static inline int test_tsk_trace_trace(struct task_struct *tsk) |
| { |
| return tsk->trace & TSK_TRACE_FL_TRACE; |
| } |
| |
| static inline void set_tsk_trace_graph(struct task_struct *tsk) |
| { |
| set_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace); |
| } |
| |
| static inline void clear_tsk_trace_graph(struct task_struct *tsk) |
| { |
| clear_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace); |
| } |
| |
| static inline int test_tsk_trace_graph(struct task_struct *tsk) |
| { |
| return tsk->trace & TSK_TRACE_FL_GRAPH; |
| } |
| |
| enum ftrace_dump_mode; |
| |
| extern enum ftrace_dump_mode ftrace_dump_on_oops; |
| |
| extern void disable_trace_on_warning(void); |
| extern int __disable_trace_on_warning; |
| |
| #ifdef CONFIG_PREEMPT |
| #define INIT_TRACE_RECURSION .trace_recursion = 0, |
| #endif |
| |
| #else /* CONFIG_TRACING */ |
| static inline void disable_trace_on_warning(void) { } |
| #endif /* CONFIG_TRACING */ |
| |
| #ifndef INIT_TRACE_RECURSION |
| #define INIT_TRACE_RECURSION |
| #endif |
| |
| #ifdef CONFIG_FTRACE_SYSCALLS |
| |
| unsigned long arch_syscall_addr(int nr); |
| |
| #endif /* CONFIG_FTRACE_SYSCALLS */ |
| |
| #endif /* _LINUX_FTRACE_H */ |